INTRODUCTION

Top Abstract Introduction Materials and Methods Results Discussion References

IS492 is a 1.2-kb multicopy insertion sequence (IS) found in the gram-negative marine bacterium Pseudoalteromonas atlantica (3). Insertion and precise excision of IS492 at an essential locus for extracellular polysaccharide (EPS) synthesis (eps) is associated with phase variation of EPS production in P. atlantica (2). The ability of P. atlantica to switch the adhesin EPS on and off is important in the life cycle of this biofilm-forming bacterium, which moves from solid surfaces (such as seaweed or sand) to the open ocean and then back to a solid substrate to initiate a new biofilm (6, 7). Southern blot analysis performed by Bartlett et al. (2) on chromosomal DNA from EPS phase variants of P. atlantica indicated that excision of IS492 from the eps locus does not result in insertion of IS492 at a new site in the chromosome. Therefore, precise excision of IS492 from eps is not associated with replicative transposition of IS492 or with a cut-and-paste mechanism for transposition in which excision is directly linked to insertion at a new site. Instead, the result of the Southern analysis suggests that precise excision results in loss of the element or that the element moves into an extrachromosomal form.

IS492 is a member of the IS110-IS492 family of insertion elements, a group recognized as atypical in several aspects (for a review, see reference 19). Its members have either extremely small or no terminal inverted repeats, and many do not create target site duplications upon insertion. The transposases for this family, including MooV (for mover of IS492 in oceanic variants) from IS492, are also unusual. These transposases have homology with each other and with the novel site-specific DNA invertase Piv from Moraxella lacunata and Moraxella bovis (16). Despite the homology with Piv, there is no shared catalytic amino acid motif with the site-specific DNA recombinases of the  Int and Hin-resolvase families (for a review, see reference 23). In addition, it is not apparent that the DNA recombinases of the IS110-IS492 family contain the DDE motif, which is the most common catalytic motif of the characterized transposases-phosphoryltransferases from eukaryotes and prokaryotes (for reviews, see references 8 and 19). These combined unique aspects suggest that the transposases from the IS110-IS492 family of insertion elements use a different catalytic mechanism than previously characterized for transposases and warrant further investigation.

In the work presented here, we have focused on the excision reaction of IS492 transposition. A circular product of IS492 excision can be detected by PCR analysis at low levels in P. atlantica and in an Escherichia coli model system. Both excision and formation of the circular product are dependent on the transposase MooV. Determination of the requirements for and consequences of IS492 precise excision and circle formation suggests that circularization of the element plays a regulatory role in IS492 transposition. Surprisingly, these analyses also revealed that the target sequence that is duplicated upon insertion of IS492 is required for excision of IS492 in E. coli.

	MATERIALS AND METHODS

Top Abstract Introduction Materials and Methods Results Discussion References

Bacterial strains. P. atlantica DB27 was a gift from D. Bartlett (2, 3). P. atlantica 19262, 43666, and 43667 (7, 36); Pseudoalteromonas espejiana 29659 (5); and Pseudoalteromonas haloplanktis 14393 (26) were obtained from the American Type Culture Collection (ATCC). E. coli InvF' [F' (80lacZM15) endA1 recA1 hsdR17 supE44 thi-1 gyrA96 relA1 (lacZYA-argF)U169] (Invitrogen), TOP10 [F mcrA (mrr-hsdRMS-mcrBC) 80lacZM15 lacX74 deoR recA1 araD139 (ara-leu)7697 galU galK rpsL(Str^r) endA1 nupG] (Invitrogen), DH5 [(80lacZM15) supE44 lacU169 hsdR17 recA1 endA1 gyrA96 thi-1 relA1] (obtained from C. Moran), and HMS174(DE3) [(DE3) recA1 hsdR rifR] (Novagen) were used as hosts for IS492-containing plasmids and MooV expression vectors. E. coli MC1061(recA) [hsdR araD139 (araABC-leu)7679 lacX74 galU galK rpsL thi recA] (ATCC) and DH5 were used for circle promoter studies.

Media, reagents, and enzymes. All E. coli strains were grown on Luria-Bertani (LB) agar (Difco). Pseudoalteromonas strains were cultured on Difco 2216 marine agar at 75% of the recommended concentration (4). The following drug concentrations were used for plasmid selection and maintenance: ampicillin at 80 or 100 µg/ml, chloramphenicol at 50 or 80 µg/ml, tetracycline at 12.5 µg/ml, and streptomycin at 25 µg/ml. When indicated, 5-bromo-4-chloro-3-indolyl--D-galactoside (X-Gal) (40 µl of a 40-mg/ml solution) was spread onto plates. All chemicals were purchased from Sigma Chemical Co. Restriction enzymes, T4 DNA ligase, and Klenow DNA polymerase were purchased from New England Biolabs. Sequenase, dideoxynucleotides, and deoxynucleotides were purchased from Amersham, and [-³²P]dATP was purchased from Dupont NEN. Pfu DNA polymerase used in PCR was obtained from Stratagene. Oligonucleotides were purchased from Gibco-Bethesda Research Laboratories.

Plasmids and plasmid constructions. The sequences of all oligonucleotides utilized in this work are listed in Table 1. All constructs created with PCR-amplified DNA fragments were sequenced to determine that there were no PCR-generated mutations. Cosmids pDB200 (eps⁺) and pDB440 (eps::IS492) were gifts from D. Bartlett and were previously described (2). IS492 was amplified by PCR from pDB440 by using oligonucleotides 1 and 2 and cloned into the TA cloning vector pCR2.1 (Invitrogen), resulting in pAG949. A mooV mutant derivative of pAG949, pAG957, was constructed by removing the 357-bp MfeI fragment of IS492 and replacing it with an 884-bp DNA fragment containing the chloramphenicol acetyltransferase gene (cam); the cam fragment was PCR amplified from pACYC184 with oligonucleotides 3 and 4, encoding the MfeI sites to facilitate cloning. Both IS492 and IS492mooV::cam were subcloned from pAG949 and pAG957, respectively, as BamHI-to-XhoI fragments into the BamHI-to-XhoI region of low-copy-number plasmid pACYC177, to generate pAG956 and pAG959.

492mooV

Southern blotting. Standard techniques for transfer of DNA onto a nylon support with alkaline buffer were performed as described by Ausubel et al. (1). Ethidium bromide staining of the agarose gel before and after transfer of the DNA for the Southern blot showed that approximately equal amounts of chromosomal DNA from each strain had transferred to the blot filter. Hybridizations were performed with Rapid-hyb buffer (Amersham) according to the manufacturer's recommendations: the hybridization temperature was 65°C, and hybridization was followed by one low-stringency wash in 2× SSC (1× SSC is 0.15 M NaCl plus 0.015 M sodium citrate)-0.1% (wt/vol) sodium dodecyl sulfate (SDS) for 20 min at 65°C and two high-stringency washes in 0.5× SSC-0.1% (wt/vol) SDS for 15 min at 50°C. Following the final washes after hybridization, the blots were visualized by using a Molecular Dynamics 445SI PhosphorImager.

PCR assay to detect IS492 circles. IS492 circle junctions were detected by using either of two sets of PCR primers directed in opposing orientations (with 3' extendable ends directed outwardly): oligonucleotides 12 and 13 or oligonucleotides 22 and 23, with 405- and 648-bp products, respectively. For initial circle detection, colony PCR was used; template DNA was prepared from single colonies by resuspending the colony in 30 µl of Tris-EDTA (pH 8.0), boiling to lyse the cells, and centrifuging to remove insoluble debris. The colonies were grown overnight on solid medium, with the appropriate antibiotics and various concentrations of isopropyl--D-thiogalactopyranoside (IPTG) as indicated, at 30°C (for P. atlantica) or 37°C (for E. coli), followed by incubation at 4°C for 2 to 24 h. The incubation at 4°C was essential for circle detection. Comparative PCR with wild-type IS492 and mutant strains was done with template DNA prepared by plasmid minipreps (Qiagen) on cells grown as described above; the DNA concentration was normalized for all samples, first by UV spectroscopy at 260 nm and then by finding the concentration of template which gave equal-intensity control PCR products as determined by electrophoresis of dilutions of the products on agarose gels, staining with ethidium bromide, image acquisition on a fluorescence transilluminator with a digital camera, and quantitative analysis using the image TIFF file and ImageQuant Software Package from Molecular Dynamics. Control PCR products were generated in triplicate by using twofold template dilutions with primers which amplify a 603-bp region of the -lactamase resistance marker found on the IS492-containing plasmids; 30 cycles of PCR amplification were used, whereby the linear range of the standard curve extended from 9.3 × 10⁴ to 9.3 × 10⁸ pAG949 (IS492) molecules, and differences between product intensities could be reproducibly determined. Reaction conditions for the experimental and control products were identical: 95°C for 2 min, followed by 30 cycles of 95°C for 1 min, 60°C for 1 min, and 72°C for 2 min.

PCR assay to detect repaired donor plasmid. The repaired donor plasmid was detected by PCR with primers complementary to known eps sequence, oligonucleotides 28 and 29. Template DNA was prepared and normalized as described above for the detection of IS492 circles, using HMS174(DE3) carrying either pCR2.1, pAG949, pAG957, or pAG957 and pAG954. Reactions were done in 1× Pfu buffer with 50 µM dNTPs and 2.5 U of Pfu polymerase. Cycling conditions were 95°C for 2 min, followed by 30 cycles of 95°C for 1 min, 57°C for 1 min, and 72°C for 1.5 min. Products were detected on a 2% agarose gel (1% NuSieve, 1% SeaKem [FMC BioProducts]).

Genetic assay for excision of IS492. Competent TOP10 cells were transformed with the excision reporter plasmid pAG993 (wild-type IS492) or pAG994 (IS492mooV::cam), selecting for tetracycline resistance. These transformants were then made competent by the CaCl₂ method (27), transformed with pMal-C2 or pMalE-MooV, and then plated onto LB agar plates containing 12.5 µg of tetracycline per ml and 100 µg of ampicillin per ml. Two primary transformant colonies were each grown to an OD₆₀₀ of 0.2 to 0.4, and 10-fold serial dilutions were plated in duplicate. Acquisition of chloramphenicol resistance was scored as colonies which were visible after overnight growth at 37°C on LB agar containing 80 µg of chloramphenicol per ml. The number of viable cells containing the excision reporter plasmid was determined by plating dilutions of the same cultures on LB agar containing 12.5 µg of tetracycline per ml. To physically determine if excision of the IS492 element had occurred, the plasmid DNA was prepared from chloramphenicol-resistant cells, cut with NcoI, and examined by agarose gel electrophoresis in comparison with the original plasmids. The Cm^r Tet^r and Cm^s Tet^r colonies from these platings were also checked by the PCR assay for circle junction formation.

Electrophoretic gel fractionation for detection of IS492 circular form. HMS174(DE3) containing pAG949 was streaked for confluent growth on three standard (90-mm-diameter) LB agar plates containing ampicillin at 100 µg/ml. The cells were grown at 37°C overnight, followed by a 2-h incubation at 4°C. Plasmid DNA was prepared from total scraped cells by using a Quiagen Plasmid Maxi kit, and 0.25 µg of this DNA was loaded onto a 1% agarose gel. The gel was lightly stained with ethidium bromide. DNA was size fractionated by dividing the gel into segments relative to a linear DNA marker ladder. DNA was eluted from the agarose, phenol-chloroform extracted, and ethanol precipitated by standard protocols described by Sambrook, et al. (27). Two nanograms of a control artificial IS492 circle was fractionated similarly from the same agarose gel. The control circle was constructed with IS492 plus 150 bp of surrounding sequence which was removed from pAG949 by EcoRI restriction digestion. The 1,352-bp EcoRI fragment was gel purified from 1% agarose, followed by phenol-chloroform extraction and ethanol precipitation. T4 DNA ligase was added to DNA diluted to 0.3 µg/ml, a concentration at which intramolecular ligation predominates. The covalently closed circular form was then supercoiled by using DNA gyrase according to the specifications of the manufacturer (Gibco-BRL).

Identification and characterization of IS492 target sites in P. atlantica. Inverse PCR was performed with chromosomal DNA isolated from EPS⁺ P. atlantica DB27 by the protocol of Ochman et al. (24). P. atlantica chromosomal DNA (0.5 µg) was digested with either RsaI or HaeIII (which do not have recognition sites within the IS492 sequence). Restriction enzymes were removed by phenol extraction followed by ethanol precipitation. The digested DNA was diluted to 5 µg/ml, and T4 DNA ligase was added; these conditions promote intramolecular ligation. After overnight incubation at 16°C, the ligase was inactivated by heat. Various dilutions of the ligated products were used as templates in PCRs with mixtures containing primers complementary to IS492 with their 3' ends directed outwardly (oligonucleotides 12 and 13); therefore, these primers could be used to amplify DNA from either side of an IS492 insertion. PCR products were generated by Pfu (turbo) polymerase (Stratagene) under the following thermal cycling conditions and cloned into the plasmid vector pCR2.1 (Invitrogen) for subsequent sequencing: 95°C for 2 min, followed by 30 cycles of 95°C for 1 min, 57°C for 1 min, and 72°C for 6 min.

Circle junction promoter activity assay. For measurement of -galactosidase activity, cultures of MC1061(recA) carrying either pDV6, pCB267, or pDV5 and cultures of DH5 carrying either pAG967, pNN387, or pAG620 were grown overnight at 37°C in LB medium with the appropriate antibiotics and diluted 1:50 into fresh medium. -Galactosidase activity was measured when cells reached mid-exponential phase (OD₆₀₀ = 0.4 to 0.6), according to the method of Miller (21) with an SDS-chloroform lysis modification. Lysates were centrifuged prior to measurements of absorbance at 420 nm.

	RESULTS

Top Abstract Introduction Materials and Methods Results Discussion References

Prevalence of IS492 in P. atlantica and related marine bacteria. Bartlett et al. (2) previously reported that P. atlantica DB27 contains several copies of IS492. It has not been reported that IS492 appears in other isolates of P. atlantica or in other gram-negative bacteria. To determine if other P. atlantica strains or related marine bacteria (11) also contain IS492, Southern blot analysis (Fig. 1) was performed with chromosomal DNAs from P. atlantica DB27 (3, 7), P. atlantica ATCC 19262 (36), P. atlantica ATCC 43666 (7) and ATCC 43667 (7), Pseudoalteromonas (Alteromonas) espejiana ATCC 29659 (5), and Pseudoalteromonas (Alteromonas) haloplanktis ATCC 14393 (26). The chromosomal DNAs were digested with BamHI alone (Fig. 1, lanes B) or with BamHI and XmnI (Fig. 1, lanes X). BamHI has no recognition site within the known IS492 DNA sequence, and XmnI has a single recognition site within IS492 at 565 bp from the left end of the 1,202-bp element. Figure 1 shows that in addition to P. atlantica DB27, two of the ATCC P. atlantica strains (ATCC 43666 and ATCC 43667) have IS492 insertions in the chromosome. As expected, the BamHI fragments that hybridized with IS492 (Fig. 1, lanes B) were cleaved by XmnI, thus generating twice as many hybridizing bands (Fig. 1, lanes X). The differences in the hybridization profiles for the multicopy IS492 element may reflect movement of the IS element or restriction fragment polymorphisms. There is at least one weakly hybridizing band in the P. espejiana DNA (Fig. 1, lane 5X); this may indicate that a cryptic or diverged IS element, related to IS492, is present on the chromosome of P. espejiana. No hybridization of the IS492 probe with the DNA from P. atlantica 19262 or P. haloplanktis was seen (Fig. 1, lanes 2 and 6). Although strain 19262 is considered the type strain for P. atlantica, it differs from the other P. atlantica isolates in growth rate (higher), colony appearance (more mucoid and no phase variation), and odor, as well as in its lack of IS492 on the chromosome.

View larger version (81K): [in this window] [in a new window]   FIG. 1.   Southern analysis of P. atlantica and closely related marine bacteria with 32P-labeled IS492 DNA as a probe. Chromosomal DNAs from the following strains were digested with either BamHI alone (lanes B) or BamHI and XmnI (lanes X) and subjected to agarose gel electrophoresis: P. atlantica DB27 (lanes 1), P. atlantica ATCC 19262 (lanes 2), P. atlantica ATCC 43666 (lanes 3), P. atlantica ATCC 43667 (lanes 4), P. espejiana ATCC 29659 (lanes 5), and P. haloplanktis ATCC 14393 (lanes 6). After transfer to a nylon membrane, the DNA was probed with a 1-kb [32P]dATP-labeled IS492 DNA fragment. The positions and sizes of the molecular size markers on the agarose gel are indicated to the left.

IS492 forms circles in P. atlantica and E. coli. Bartlett et al. (2) performed Southern blot analysis of the chromosomes from P. atlantica DB27 that had switched from EPS to EPS⁺; the results indicated that precise excision of IS492 from the eps locus is not linked to insertion of the element at a new site on the chromosome. A possible explanation for the unlinking of IS492 excision and insertion is that IS492 may form a circular, extrachromosomal element as an intermediate in transposition or as an end product of precise excision. Indeed, the related IS element IS117, from the IS110 family, has a circular, extrachromosomal form that is proposed to be an intermediate in transposition (13). To assay for a circular form of IS492 in P. atlantica DB27, PCR was used to detect the junction of the left and right ends of IS492. Primers that are complementary to the DNA sequences proximal to the ends of IS492 were designed to have their 3' ends directed away from each other, such that the predicted PCR product generated with this primer set would represent amplification from a circular form of the IS (Fig. 2A). Two independent primer sets were used to generate PCR products. PCR amplification of crude DNA isolated from EPS⁺ colonies yielded products of the appropriate size for both primer sets, i.e., a 405-bp product for primers 12 and 13 (Fig. 2B, lane 1) and a 648-bp product for primers 22 and 23 (data not shown), suggesting that a circular IS492 element was the template in the reaction. An additional, smaller PCR product was present only for primers 12 and 13 (Fig. 2B, lane 1). The related Pseudoalteromonas species P. espejiana and P. haloplanktis, which showed no bands hybridizing to IS492 in the Southern assay, did not yield a PCR product in this assay (Fig. 2B, lanes 2 and 3).

View larger version (34K): [in this window] [in a new window]   FIG. 2.   Detection of IS492 circles in vivo by PCR analysis. (A) Diagram of IS492-containing plasmid pAG949 and locations of primers (oligonucleotides 12 and 13) used in this PCR analysis. Potential products of excision are drawn below the diagram. (B) Agarose gel electrophoresis of products generated from colony PCR with the circle junction primers (oligonucleotides 12 and 13) and total DNA from P. atlantica DB27 (lane 1), P. espejiana (lane 2), P. haloplanktis (lane 3), E. coli InvF' containing pCR2.1 (lane 4), InvF' containing pAG949 (lane 5), E. coli HMS174(DE3) containing pCR2.1 (lane 6), or HMS174(DE3) containing pAG949 (lane 7). Lanes 8 to 11 have the same template DNAs as lanes 4 to 7, respectively, but PCR was performed with the bla primers (see Materials and Methods), which amplify the -lactamase gene of pAG949, as a control for template addition. Lane M, molecular size markers in base pairs. (C) Sequences of the eps locus prior to and after IS492 insertion and the circle junction sequence with flanking IS492 termini. The 5-bp target duplication-circle junction sequence is underlined, the IS492 insertion in eps is represented by a box, and the IS492 sequence is italicized in the circle junction sequence.

View larger version (66K): [in this window] [in a new window]   FIG. 3.   Demonstration of circular product from IS492 excision by electrophoretic fractionation of circular DNA from E. coli containing IS492. The illustration shows the 1% agarose gel used to fractionate the open circular IS492 control DNA (OC) and the Qiagen plasmid (circular) DNA preparations (Q1 and Q2) from E. coli containing pAG949, which carries wild-type IS492. Slices were cut from the gel based on comigration with the DNA molecular size standards (1-kb ladder; Promega). DNAs electroeluted from these slices were used as template DNAs for PCR analysis to detect the IS492 circle junction. The PCR products from the wide-range molecular size gel slices (Q1 and OC, >3, 3 to 0.5, and <0.5 kb) and from the narrow-range molecular size slices (Q2, 3 to 1.5, 1.5 to 1, 1 to 0.75, and 0.75 to 0.5 kb) were separated on a 2% agarose gel. The white arrows indicate the primary circle junction PCR product for each group of fractions.

Circle formation is transposase dependent. The predicted transposase for IS492 transposition is encoded by the only long open reading frame of the element (957 bp), designated mooV. To determine if IS492 circle formation is dependent on expression of mooV, we replaced 357 bp of the mooV sequence with an 884-bp DNA fragment containing the chloramphenicol acetyltransferase (cam) gene. This mooV::cam derivative of IS492 was introduced into E. coli on a ColE1-ori plasmid, and transformants were assayed for circle formation by using the colony PCR assay for the circle junction (see Materials and Methods). The IS492 mooV::cam construct gave no circle junction product (Fig. 4, lane 3), indicating no circle formation, whereas the wild-type IS492 construct generated circles that served as a template for producing the circle junction PCR fragment (Fig. 4, lane 2). Several control measures were performed to confirm the negative result for the IS492mooV::cam construct, including determining the template concentration in the reaction mixture and Southern blotting to increase the sensitivity for detection of the PCR product (see Materials and Methods) (data not shown).

View larger version (64K): [in this window] [in a new window]   FIG. 4.   Effect of MooV-His6 and Piv-His6 on IS492 circle formation. IS492 circle formation was examined in E. coli HMS174(DE3) by the PCR assay diagrammed in Fig. 1. The circle junction PCR products after agarose gel electrophoresis are shown. MooV-His6 and Piv-His6 (presence or absence is indicated by + or , respectively) were provided in trans from pAG954 and pAG955, respectively, to the IS492mooV::cam-carrying plasmid, pAG957 (). The levels of MooV-His6 and Piv-His6 were varied by using different concentrations of IPTG for induction. The following plasmids in HMS174(DE3) were included as controls: pCR2.1 ( for IS492), pAG949 (+ for IS492), and pAG903 (T, IS492 target site mutant [see Materials and Methods]). Lane M, Promega 1-kb markers.

492mooV

492mooV

492mooV

492mooV

Precise excision of IS492 and repair of the donor molecule. In P. atlantica, excision of IS492 from the eps locus restores expression of eps, indicating that either there is precise exchange of DNA strands in the excision process or the eps target sequence is frequently repaired upon excision of IS492. If circle formation by IS492 corresponds to precise excision from eps, then the repaired donor DNA molecule should be detectable. In the assays for circle formation by IS492 in E. coli, the donor molecules are multicopy plasmids carrying the IS492 element within the eps target sequence. Examination of plasmid DNA carrying wild-type IS492 (pAG949) by electrophoresis on an agarose gel revealed an additional, faster-migrating DNA species. The slower-migrating plasmid DNA was electroeluted from the agarose gel and transformed into naive E. coli cells at a DNA concentration at which the likelihood of cotransformation was negligible. Plasmid preparations from these transformants again yielded the additional faster-migrating DNA on agarose gels (Fig. 5A). PCR amplification was performed on this plasmid preparation by using primers to the eps target sequence; DNA sequencing of this PCR product (Fig. 5B, lane 4) revealed that the sequence matches the eps locus with no IS492 insertion. This result indicates that the faster-migrating species was the donor molecule after precise excision of IS492. The eps target sequence PCR product was not amplified from the same E. coli strain containing the plasmid with IS492mooV::cam within the eps sequence or from the E. coli strain containing the parent plasmid pCR2.1 (Fig. 5B, lanes 3 and 5, respectively). Repair of the donor molecule can be detected for IS492mooV::cam when MooV-His₆ is supplied in trans and its expression is induced by IPTG (Fig. 4B, lanes 1 and 2). Thus, precise excision was detected only under conditions that also gave IS492 circles. These results indicate that excision of IS492 and repair of the donor correlate with circle formation. However, every excision event that results in circle formation may not also give a repaired donor molecule; the results given in Fig. 4, lane 5, show that circle formation can be detected for IS492::cam at very low levels of mooV-his₆ expression (in the absence of IPTG), but the repaired eps target sequence is not detected by PCR (Fig. 5B, lane 2) until induction of mooV-his₆ expression at 0.01 mM IPTG.

View larger version (47K): [in this window] [in a new window]   FIG. 5.   Detection of the repaired donor DNA after IS492 excision. (A) Plasmid preparation of pAG949 after agarose gel electrophoresis. The following forms of the plasmid are indicated to the right of the gel: open circular (O.C.), supercoiled (S.C.), and the repaired pAG949 after excision of IS492 (repaired donor). The DNA molecular size marker (lane M) is the Promega /H3 markers, with sizes indicated to the left. (B) PCR assay for the repaired donor DNA, using primers complementary to eps (lanes 1 to 5), and controls for addition of template to the reaction mixtures, using primers complementary to bla (lanes 6 to 10). Strains tested for the repaired donor DNA were HMS174(DE3) containing pCR2.1 (no IS492) (lanes 5 and 6), pAG949 (wild-type IS492) (lanes 4 and 7), pAG957 (IS492mooV::cam) (lanes 3 and 8), pAG957 and pAG954 (IS492mooV::cam plus mooV-his6) (lanes 2 and 9), and pAG957 and pAG954 (inducing conditions [0.01 mM IPTG]) (lanes 1 and 10). The molecular size marker (lane M) is the New England Biolabs 100-bp marker with sizes (in base pairs) indicated to the left.

492mooV

492mooV

5

492mooV

492mooV

IS492 excision requires flanking eps sequences. The ability of IS492 to be excised precisely and restore the donor sequence is a very unusual feature for a transposable element (8, 19). Another unusual aspect of IS492 is that it does not have inverted-repeat DNA sequences at the ends of the element; for most IS elements, the short terminal inverted-repeat DNA sequences are required for transposase recognition and cleavage of the DNA at the ends of the element (for a review, see reference 19). These features of IS492 suggest that the sequence flanking the IS element at its insertion sites may play an essential role in transposase binding and in the excision reaction. For example, the 5-bp sequence that is duplicated upon insertion of IS492 may function very much like the attL and attR sequences in excisive site-specific recombination for bacteriophage  (for a review, see reference 15). To determine if flanking DNA sequences affected circle formation of IS492, a deletion analysis of the eps target sequence was performed. Our original plasmid constructs containing the wild-type IS492 (pAG949 and pAG956) carried 58 and 76 bp of eps target sequence flanking the left and right ends of the inserted element, respectively. This eps target sequence was reduced systematically on either side of IS492 in a series of plasmids (see Materials and Methods), resulting in IS492 flanked by 24 and 23 bp, 18 and 17 bp, 10 and 10 bp, 5 and 5 bp, or 1 and 0 bp of eps target sequence (Fig. 6A). PCR amplification to detect the circle junction, using DNA from E. coli carrying each of these derivative plasmids as a template, indicated that having between 5 and 10 bp of the flanking eps target sequence is essential for detection of the circle junction fragment and, therefore, IS492 excision (Fig. 6B).

View larger version (42K): [in this window] [in a new window]   FIG. 6.   Target site requirements for IS492 excision. (A) Schematic diagram showing the extent of eps target sequence on either side of IS492 (left flanking sequence, open box; right flanking sequence, hatched box). The number at either end of IS492 indicates the number of nucleotides of eps sequence. Whether a circle junction PCR product could be detected is indicated as + or . (B) Agarose gel electrophoresis of circle junction (CJ primers) PCR products and bla (bla primers) control products generated from plasmids carrying IS492 sequence with the flanking sequences shown in panel A. Lane M, Promega 1-kb marker, with the sizes of some of the markers (in base pairs) shown to the left.

Other insertion sites for IS492 in P. atlantica DB27. When multiple circle junction PCR products were sequenced for the circular form of IS492 in P. atlantica, all of the junctions had the identical 5-bp sequence that is duplicated at the eps locus upon insertion of IS492. That same 5-bp sequence is critical in excision of the IS element in E. coli, based on our deletion analysis described above. Therefore, it was of interest to determine whether this 5-bp sequence is found at the other insertion sites for IS492 on the chromosome of P. atlantica. We used the inverse PCR method described by Ochman et al. (24) for amplifying flanking DNA to determine the sequences of other IS492 target sites in P. atlantica DB27. Digestion of total cellular DNA with RsaI or HaeIII, which have no recognition sequences within the IS492 element, results in linear restriction fragments from the chromosomal DNA containing the full IS element with some of its flanking sequence from both the left and right ends at each of the IS492 insertion sites. Dilution and ligation of the linear fragments result in open circles that are then used as templates in PCRs with the primer set (primers 12 and 13) used in the circle junction assays (Fig. 2A). Thus, the PCR products contained the ends of IS492 separated by the flanking DNA sequence from either end of the element up to the nearest RsaI or HaeIII site, where ligation occurred. The different-sized PCR products generated from the ligated dilutions of the RsaI- and HaeIII-restricted chromosomal DNA (Fig. 7A) should each represent a different insertion site for IS492 on the chromosome of P. atlantica; as expected, the 405-bp circle junction fragment is also seen from each amplification with the inverse PCR primers.

View larger version (27K): [in this window] [in a new window]   FIG. 7.   Identification of other target sites in P. atlantica DB27. (A) Agarose gel electrophoresis of PCR products generated from inverse PCR (described in Materials and Methods) of diluted and ligated P. atlantica DB27 chromosomal DNA following digestion with either RsaI (lanes 1 to 3) or HaeIII (lanes 4 to 6). Either 0.25 µg (lanes 1 and 4), 0.025 µg (lanes 2 and 5), or 0.0005 µg (lanes 3 and 6) of P. atlantica chromosomal DNA was used as a template in inverse PCRs. Lane M, Promega 1-kb marker. The inverse image of the UV-illuminated ethidium bromide-stained gel is shown. (B) Alignment of target site sequences. The duplicated target sequence is indicated with a box.

Assembly of a strong promoter by circle junction formation. A possible advantage for an insertion element to have a circular intermediate has been proposed based on studies of IS911 transposition (33, 34). For IS911, it has been shown that inverse repeat left- and right-end joining results in the formation of a strong promoter which can drive transposase expression during a brief time when the presence of the transposase is essential for continued survival. We examined whether IS492, too, might possess such a regulatory mechanism for transposase expression. The 5-bp circle junction flanked by 26 bp of the left end and 18 bp of the right end of IS492 was inserted into a multicopy vector used for promoter identification in front of a promoterless lacZ (pDV6) (Fig. 8A). Positive transformants were dark blue on LB agar plates containing X-Gal, thus indicating that the circle junction of IS492 does form a promoter driving -galactosidase expression. -Galactosidase assays were performed with these cells as well as a reference strain containing the same plasmid but with a lacUV5 constitutive promoter driving -galactosidase expression (pDV5). -Galactosidase levels were 6.7-fold higher for the IS492 circle junction promoter, with 2,000 Miller units of activity versus 300 Miller units for the lacUV5 control promoter (pDV6 versus pDV5 in Fig. 8B). The circle junction promoter was also cloned in single copy on pNN387 (9) to estimate its strength. A larger fragment containing the circle junction was cloned, with 66 bp of the left end and 202 bp of the right end of IS492, in front of a promoterless lacZY; this plasmid construction was designated pAG967 (Fig. 8A). Positive transformants were dark blue on LB agar containing X-Gal, suggesting the circle junction represents a strong promoter. -Galactosidase assays were performed with these cells, and the activity levels were compared to those in control cells containing the same plasmid with a constitutive tac promoter driving lacZ expression; this control tac promoter, conII, has all regulatory elements deleted (9). The IS492 circle junction promoter demonstrated 4.3-fold higher -galactosidase activity than the constitutive tac promoter, with 1,700 versus 400 Miller units (Fig. 8B).

View larger version (31K): [in this window] [in a new window]   FIG. 8.   Promoter activity associated with the IS492 circle junction sequence. (A) The potential promoter sequence created when IS492 ends are joined at the circle junction is indicated by boxes. Relevant regions of plasmids pDV6 and pAG967, used to evaluate circle junction promoter activity, are schematically shown. Arrows and numbers (base pairs) are used to indicate the region of IS492 included on either side of the circle junction on these plasmids. The circle junction sequence is underlined. (B) Promoter activity measured as -galactosidase activity (Miller units) in plasmids having constitutive control promoters (lacUV5 [pDV5] or conII [pAG620]) or the circle junction and surrounding IS492 sequence (pDV6 or pAG967). Besides having different amounts of surrounding IS492 sequence, pDV6 and pAG967 have different copy numbers (multiple and single copy, respectively). The relative -galactosidase activities for these promoter constructions remained constant in multiple experiments.

	DISCUSSION

Top Abstract Introduction Materials and Methods Results Discussion References

IS492 is a member of an atypical family of insertion elements that do not have inverted repeats at their ends and whose transposition is mediated by an apparently novel group of DNA recombinases (16). Transposition of IS492 controls phase variation of EPS production in the marine bacterium P. atlantica. The frequency of switching from EPS to EPS⁺ and, apparently, the frequency of IS492 precise excision from a locus that is essential for EPS production (eps) varies more than 10⁴-fold depending on the growth conditions (2). These unique features of the IS element and its transposase, along with the control of IS492 excision frequency by environmental conditions, suggest that there are likely to be many interesting features to the regulation of IS492 transposition. In this study we have begun to address the mechanism for IS492 transposition.

In PCR-based assays we detected a circular form of IS492 in P. atlantica DB27. The same circular form of IS492 was also detected in E. coli when we introduced wild-type IS492 on multi- or single-copy plasmids by transformation. DNA sequencing of the junction of the ends of the element in the circular form showed that a 5-bp sequence linked the ends of IS492. This 5-bp sequence corresponds to the eps sequence that is duplicated at the insertion site for IS492. In previous Southern analyses of IS492 transposition (2), only the eps-associated copy of the element appeared to have been excised. This suggested to us that perhaps the 5-bp eps sequence defined the circular form as being generated only from the copy of IS492 in the eps site. We identified the other insertion sites of IS492 on the P. atlantica chromosome by inverse PCR (24) and found that all of the target sites had this same 5-bp sequence; therefore, any of these copies of the element could be the source for the IS492 circle.

The conservation of this 5-bp sequence at all of the target sites for IS492 suggests an interesting possibility for the mechanism of transposition of IS492. Perhaps the transposases for IS492 and the related IS110 family of insertion elements utilize a recombination reaction more like the site-specific recombinases such as the integrases of the -Int family. In this scenario, the 5-bp target sequence would function similarly to the core sequences of the attB/attP and attR/attL sites, where DNA cleavage and precise strand exchange occur in bacteriophage  integration and excision, respectively (for a review, see reference 15). The homology of these transposases with the site-specific invertase of M. lacunata lends some support to this hypothesis. If the 5-bp sequence does function in this manner, then it would be essential for the excision process. A stepwise deletion analysis of the flanking DNA sequence showed that, indeed, between 5 and 10 bp of the flanking sequence is required for excision and circle formation. Inverting the orientation of 12 bp of the flanking sequence at one end of the element also affected circle formation; no circles could be detected, but instead of a site-specific inversion of the element, an apparent one-ended transposition event was detected by PCR. We are currently undertaking a more detailed analysis of the essential sequences at the ends of IS492 and in the flanking DNA to address their role in the excisive recombination reaction.

While some transposable elements, such Tn7, Tn10, and bacteriophage Mu, show various extents of target site selectivity for insertion, a critical role for flanking host DNA sequences in transposition is exceptional. Mu transposase shows a conditional effect of flanking host sequences on cleavage at the donor site in vitro (35), and the transposases of conjugative transposons, which share the catalytic amino acid motif of the -Int site-specific recombinases, exhibit dependence on flanking host sequences for frequency of transposition (14a). The requirement for the 5-bp duplicated target sequence for excision of IS492 is truly an unusual feature for an IS element. Another unusual aspect of IS492 excision is that it appears to frequently result in restoration of the target DNA sequence. In both P. atlantica (2, 3) and E. coli (Fig. 5), the donor DNA is repaired after excision of IS492. This ability to excise precisely is not necessarily linked to circle formation. The related IS element IS117 from Streptomyces coelicolor has been shown to form a minicircle which may be an intermediate in transposition; however, precise excision of IS117 is never seen (18). In fact, it has been suggested that all IS117 transposition events are replicative in S. coelicolor and Streptomyces lividans (31). Thus, although our results show that circle formation and precise excision require the same trans-acting factor, MooV, and at least some of the same cis-acting DNA sequences in the flanking host DNA, the questions of whether precise excision and circle formation by IS492 are directly linked and of what role circle formation plays in the transposition reaction still remain.

Formation of circular products in transposition is not unique to the IS110-IS117 family of insertion elements; circles have been detected in a number of other systems, including IS3 (29), IS2 (17), IS150 (19), IS10 (22), IS1 (19, 30), IS91 (20), and IS911 (19, 25). IS911 circles have been shown to actively integrate in vivo and in vitro, supporting their possible role as transposition intermediates (33, 34). Strong evidence supporting a functional role of the IS911 circle in transposition comes from regulation studies of the IS911 transposase. The assembly of IS911 inverse repeat right and left ends as a circle junction creates a strong promoter which is stronger than the indigenous promoter driving transposase transcription; thus, it has been suggested that in a postexcision situation where a transposon circle has been formed, the upregulation of transposase transcription may increase the likelihood of integration occurring (33).

IS492, like IS911, forms a strong promoter from the left and right ends when joined by the 5-bp host target sequence at the circle junction (Fig. 8). The high level of transcription from this newly assembled promoter upon excision of IS492 could either positively or negatively regulate reinsertion of the element. The new promoter is appropriately positioned to initiate increased expression of mooV. In E. coli, the amount of circle formation by a mooV derivative of IS492 was dependent on the level of mooV expression from a plasmid in trans (Fig. 4). In general, for most transposable elements, there are multiple levels of regulation to keep transposition frequencies low (for a review, see reference 8). The decrease in circle formation at high levels of MooV (Fig. 4) may reflect autoregulation of transposase expression, as is seen for IS1 and Tn7 (8, 30), although the decrease in cell viability upon induction of MooV complicates this analysis. Alternatively, a negative effect of the high level of transcription from the promoter overlapping the ends of the element may be that RNA polymerase then prevents binding of MooV to the ends. An assay for insertion of IS492 is needed to address the role of the IS492 circle and the circle junction promoter. We have not observed insertion of IS492 into the eps sequence or a new locus in E. coli (data not shown), which suggests that regulatory or accessory recombination factors that are involved in transposition of IS492 in P. atlantica are absent in E. coli. We are pursuing the characterization of the mechanism for IS492 transposition and its regulation genetically in P. atlantica and E. coli and biochemically in an in vitro recombination system.