Previous Article | Next Article ![]()
Journal of Bacteriology, June 2002, p. 3008-3016, Vol. 184, No. 11
0021-9193/02/$04.00+0 DOI: 10.1128/JB.184.11.3008-3016.2002
Copyright © 2002, American Society for Microbiology. All Rights Reserved.
Isabel R. Delany,,
and Fergal O'Gara*
BIOMERIT Research Centre, National University of Ireland, Cork, Ireland
Received 16 October 2001/ Accepted 4 March 2002
|
|
|---|
70 RNA polymerase-dependent promoter that is likely to overlap the promoter of the divergently transcribed phlF gene. The repression by PhlF is due to its interaction with an inverted repeated sequence, phO, located downstream of the phlA transcriptional start site. Cross-linking experiments indicate that PhlF can dimerize in solution, and thus PhlF may bind phO as a dimer or higher-order complex. Furthermore, it is now demonstrated that certain regulators of PHL synthesis act by modulating PhlF binding to phO. PHL, which has previously been shown to be an autoinducer of PHL biosynthesis, interacts with PhlF to destabilize the PhlF-phO complex. Conversely, the PhlF-phO complex is stabilized by the presence of salicylate, which has been shown to be an inhibitor of phlA expression. |
|
|---|
The genes involved in the biosynthesis of PHL have been cloned and sequenced from a number of Pseudomonas strains (3, 4, 11, 17, 37, 55, 61). Genetic and sequence data show that the phl locus is comprised of a number of transcriptional units. The structural genes, phlA, phlC, phlB, and phlD, are transcribed as a single operon (phlACBD), with the putative permease gene, phlE, probably transcribed from its own promoter further downstream. The transcriptional repressor, phlF, is located upstream of the phlACBD operon and is transcribed in the opposite direction (4, 11, 54). This organization is common to many polyketide biosynthetic loci (14, 41, 43).
There is evidence that PHL production is influenced by environmental and nutritional signals as well as by transcriptional and posttranscriptional regulatory systems. The environmentally responsive GacS/GacA two-component regulatory system is required for production of PHL, with mutation of either component completely abolishing PHL biosynthesis (10, 11, 15). Transcriptional studies have demonstrated that the GacS/GacA system positively regulates expression of both phlACBD and phlF (11, 20). At another level, sigma factors may also play a role in regulation at the phl locus. It has been shown that overexpression of the housekeeping sigma factor rpoD, encoding
70, or mutation of the stationary-phase sigma factor rpoS increased PHL production (38, 53, 64).
Pathway-specific regulators are also involved in regulation of PHL biosynthesis. The phl biosynthetic gene cluster is negatively regulated by the repressor PhlF and positively modulated by the genetically linked phlH gene, which encodes a putative regulator (11, 54). Posttranscriptional control via homologues of the Escherichia coli CsrA and CsrB molecules also plays a role in controlling PHL production. This system, which comprises a translational repressor protein (CsrA/RsmA) and a regulatory RNA (CsrB/RsmB), has been described in a number of gram-negative bacteria (6, 30-33, 36, 50). Recently, we reported the characterization of the prrB gene encoding a regulatory RNA that is a functional homologue of CsrB/RsmB. Overexpression of prrB RNA restores PHL production in gacA and gacS mutants and leads to overproduction of PHL in a wild-type P. fluorescens strain (1).
It has been established that PHL is an autoregulator, positively influencing its own production. Furthermore, salicylate and other secondary metabolites (fusaric acid and pyoluteorin) have a negative effect on PHL production. In both cases, an intact phlF gene is required, suggesting that PHL and salicylate act via PhlF (54). Thus, the interaction of PhlF with coregulators and the phlACBD promoter plays an important role in regulating PHL production. This paper describes the characterization of the promoter of the phlACBD gene cluster and identification of the PhlF binding site (operator). It is also established that the autoinducer (PHL) and the corepressor (salicylate) interact physically with the PhlF repressor to modulate PhlF binding to its operator sequence.
|
|
|---|
|
View this table: [in a new window] |
TABLE 1. Strains and plasmids used in this study
|
Construction of transcriptional fusions and ß-galactosidase assays. To characterize the transcriptional activity of the phlACBD and phlF genes, we used pCU107 and pCU109 constructs bearing lacZ transcriptionally fused with phlACBD and phlF, respectively (11, 12). The kinetics of expression of biosynthetic fusions in different backgrounds were monitored by performing ß-galactosidase assays (40). P. fluorescens F113 cells were grown with shaking (150 rpm) in 100-ml flasks containing 25 ml of medium. All measurements were performed in triplicate. For time course experiments, samples were taken from cultures at the indicated times.
RNA techniques.
Total RNA was isolated from 7 x 109 cells of wild-type P. fluorescens F113 grown for 18 h on LB broth with the RNeasy total RNA isolation kit according to the manufacturer's specifications (Qiagen, Inc.). RNA integrity was checked by electrophoresis in 1.2% (wt/vol) agarose gels containing 0.66% (vol/vol) formaldehyde. Primer extension was performed by the method of Pujic et al. (44) with the following modifications: 250 pmol of primer PE-A, which hybridized 71 nucleotides downstream of the ATG translation start codon of phlA, was end labeled using T4 polynucleotide kinase and [
32P]ATP. Labeled primers and total RNA were hybridized at 65°C for 5 min and allowed to cool at room temperature for 1.5 h. Reverse transcription was performed at 42°C for 1 h using avian myeloblastosis virus reverse transcriptase. Sequence reactions were performed with the same primers using P. fluorescens F113 plasmid DNA as a template.
Purification of PhlF. We have previously reported the purification of a histidine-tagged PhlF repressor (23.6 kDa) (12). A protein of smaller size (18 kDa) invariably copurified with the histidine-tagged PhlF protein. This 18-kDa protein is thought to be a derivative of PhlF truncated by approximately 50 amino acids at its N terminus. Pure PhlF protein was needed in this study for two reasons: first, to avoid any possible competition between the two proteins in the binding assays, especially when analyzing the influence of PHL on PhlF binding activity, and second, to avoid any interference between the functional full-sized PhlF and the truncated form in cross-linking experiments. For these reasons we optimized the purification conditions to purify only the full-length PhlF. A number of parameters were modified relative to the previous protocol (12). The procedure is detailed below, the major modifications being the use of a different strain of E. coli and different inducing conditions.
The PhlF-overexpressing plasmid pQE-60.27 was introduced into E. coli DH5
by electroporation. Then 300 ml of LB broth containing ampicillin (100 mg/ml) was inoculated at an absorbance at 600 nm of 0.1 by an overnight culture of DH5
/pQE-60.27 and grown at 37°C with shaking (200 rpm) to an optical density at 600 nm (OD600) of 0.5. Overexpression of phlF was induced by addition of 0.2 mM isopropylthiogalactopyranoside (IPTG). After incubation at 30°C for 4.5 h, the cells were harvested by centrifugation (5,000 x g) for 15 min at 4°C, washed twice in LB broth, and resuspended in 4 ml of lysis buffer (50 mM Na2PO3, 300 mM NaCl, 10 mM imidazole, 40 mg of lysozyme). Cells were then incubated on ice for 15 min and passed twice though a French press. Cell debris was removed from the crude extract by centrifugation (10,000 x g) for 40 min at 4°C, and the 6xHis-tagged PhlF protein was purified under nondenaturing conditions using Ni-nitrilotriacetic acid (Ni-NTA) spin columns, following the manufacturer's protocol (Qiagen, Inc.). The purified PhlF-6xHis was then dialyzed overnight at 4°C against 1x TE (Tris-EDTA) buffer.
Gel retardation.
DNA fragment 7EH of 145 bp covers the common sequence between 2.9 and 7.U used by Delany et al. (12). This fragment of the intergenic region was amplified using specific primers 7A5E and 7A3H with pCU109 as the DNA template. Four double-stranded oligonucleotides, p12d, p11d, p10d, and p9d, of 35 bp each were obtained by annealing oligonucleotides p12 and p12c; p11 and p11c; p10 and p10c, and p9 and p9c, respectively. Each double-stranded oligonucleotide overlaps the oligonucleotides adjacent to it by 4 bp. The four oligonucleotides cover the full length of the overlap between probes 2.9 and 7.U. The probes were 5' end labeled with [
32P]CTP using polynucleotide kinase (NEB). The labeled probes were extracted once with phenol-chloroform and ethanol precipitated. The sequences of the oligonucleotides used for PCR amplification and gel retardation will be provided upon request.
Gel shift assays were performed as described by Liu et al. (34). The binding reaction was performed in 40 µl of binding buffer (12 mM HEPES-NaOH [pH 7.9], 4 mM Tris-HCl [pH 7.9], 75 mM KCl, 10 mM MgCl2, 5 mM CaCl2, 1.0 mM dithiothreitol) containing 1 µg of salmon sperm DNA, 50 ng of poly(dI-dC), 2 µg of bovine serum albumin, 1 µl of probe, and 3 µg of purified PhlF-6xHis protein. The reaction mixture was incubated for 20 min at room temperature and directly subjected to polyacrylamide gel electrophoresis (PAGE) in a 5% (wt/vol) polyacrylamide gel containing 2.5% (vol/vol) glycerol in TAE (Tris-acetate-EDTA) buffer (40 mM Tris-acetate [pH 7.5], 2 mM EDTA). In general, electrophoresis was performed at 110 V for 2.5 h. When probes p12d, p11d, p10d, and p9d were used, electrophoresis was performed at 80 V for 1.5 h. Gels were dried and examined by autoradiography with X-ray film (Biomax; Kodak).
To analyze the effects of PHL and salicylate on PhlF binding activity, a set of solutions with different concentrations of the two metabolites were prepared in ethanol (70%). To investigate whether ethanol interferes with PhlF activity, a mobility shift assay was monitored in the presence of different concentrations of ethanol. We found that PhlF binding activity was not altered by ethanol concentrations up to 6% (data not shown). Note that the highest concentration of ethanol routinely used in binding assays with PHL and salicylate was less than 4%. As a control to determine the specificity of the effect of PHL on PhlF binding, a control band shift was performed. This used the cI2009 repressor of lactococcal bacteriophage TUC2009, which represses transcription from the early lytic promoter PR located in the cI2009-CRO2009 intergenic region (27, 59).
Footprinting. Chemical footprinting of the PhlF-DNA complex was performed using a combined gel retardation-1,10-phenanthroline-copper ion footprinting procedure (24). Briefly, labeled probe 7EH was digested with EcoRI, extracted once with phenol-chloroform, and ethanol precipitated. Digested probe was resuspended in water, and gel retardation was then performed as described above. The full retardation gel was soaked in 200 ml of 50 mM Tris-HCl (pH 8.0) and treated for 10 min at room temperature with 10 ml of solution A (2 mM 1,10-phenanthroline, 0.45 mM CuSO4) and 10 ml of solution B (58 mM 3-mercaptopropionic acid). The reaction was then quenched by addition of 20 ml of 28 mM 2,9-dimethylphenanthroline for 2 min. The gel was rinsed with distilled water and exposed to X-ray film for 30 min at room temperature. Bands of interest were cut and eluted overnight at 37°C in 500 mM ammonium acetate-1 mM EDTA. Eluted DNA was ethanol precipitated and resuspended in 80% (vol/vol) formaldehyde-10 mM NaOH-1.0 mM EDTA-0.1% (wt/vol) bromophenol blue. The DNA sample was run on an 8% (wt/vol) polyacrylamide sequencing gel.
Glutaraldehyde cross-linking of PhlF. The glutaraldehyde cross-linking procedure was modified from Derré et al. (13). PhlF (3 µg) was incubated with 10 mM cross-linking reagent glutaraldehyde in 40 µl of a reaction mixture containing 50 mM NaH2PO4, 50 mM NaCl, and 10% (vol/vol) glycerol. After incubation for 1 h at 30°C, the reaction was stopped by the addition sodium dodecyl sulfate (SDS) loading buffer. The samples were boiled and analyzed by SDS-PAGE on 10% (wt/vol) polyacrylamide gels (25). The gel was stained with Coomassie blue.
|
|
|---|
To further investigate the mechanism of regulation of PHL biosynthesis by PhlF, we performed a time course experiment monitoring the expression of phlF and phlACBD using transcriptional fusions. P. fluorescens F113 strains containing the phlACBD-lacZ transcriptional fusion carried by pCU107 and the phlF-lacZ transcriptional fusion carried by pCU109 were grown independently on SA medium and analyzed by Miller assays (Fig. 1). Expression of the phlACBD-lacZ construct was low between 0 and 12 h and reached its maximum at 13 to 20 h, when the culture was in stationary phase. This correlates with the peak of PHL production (12). In contrast, expression of the phlF-lacZ construct was highest earlier in the growth cycle, with maximal expression during logarithmic growth (3 to 13 h). These results are consistent with the hypothesis that the low transcriptional activity of phlACBD in the early logarithmic phase is a consequence of high levels of the PhlF repressor.
![]() View larger version (37K): [in a new window] |
FIG. 1. Time course of expression of the phl operon. The transcriptional fusions phlACBD-lacZ (pCU107) and phlF-lacZ (pCU109) were introduced into P. fluorescens F113. Cultures were grown on minimal medium, and absorbance was measured at 600 nm (solid circles, phlF-lacZ; open circles, phlACBD-lacZ). Expression of the fusions was assessed by measuring levels of ß-galactosidase. Grey shading represents phlF-lacZ expression, and dark shading represents phlACBD-lacZ expression. Triplicate cultures were assayed. The standard deviations are represented with error bars.
|
70 -10 element (TAGGAT) and a perfectly conserved -35 element (TTGACA) were identified (Fig. 3). The sequences of the two promoter elements are perfectly conserved in two other strains of P. fluorescens, Q2-87 (U41818) and CHA0 (AF207529). Similar promoter organization has already been reported for a number of genes in Pseudomonas aeruginosa (35, 39).
![]() View larger version (126K): [in a new window] |
FIG. 2. Primer extension analysis mapping the phlA transcriptional start site. Primer extension (PE) on total RNA from P. fluorescens F113 was performed using primer PE-A, which maps inside the phlA coding region. Plasmid DNA was sequenced using the same primer. The gel shows the only primer extension stop detected by this analysis.
|
![]() View larger version (24K): [in a new window] |
FIG. 3. Sequence organization of the phlA-phlF intergenic region. phlA and phlF indicate the start of the phlA and phlF open reading frames, respectively. Start indicates the transcriptional start of the phlACBD operon. The putative 70 -10 and -35 elements for phlA are underlined. The PhlF binding site, phO, is indicated, with its two inverted repeated sequences shown by arrows. The three regions protected by the PhlF footprint are boxed. From 5' to 3', these are box 1, box 2, and box 3, as referred to in the text. The CCAAT (ATTGG) motif of low-temperature-induced genes is underlined. The inverted repeated sequences flanking the -10 element are indicated with arrows. The accession number for this sequence is AF497760.
|
70-dependent promoter in all three Pseudomonas strains and indicate that the phl loci in strains F113 and Q2-87 are structurally more similar to each other than to the phl locus in strain CHA0. This is consistent with a recent phylogenetic analysis which established that P. fluorescens strains F113 and Q2-87 are more closely related to each other than to P. fluorescens CHA0 (46). Previously, it has been reported that PHL accumulates to higher levels at reduced temperatures, but it remains to be determined whether the CCAAT motif is involved in this phenomenon (55). Identification of the PhlF binding site. Previously, we established that PhlF binds to the phlA-phlF intergenic region and used gel mobility shift analyses to localize the binding site to a 100-bp sequence (12). In order to define the precise PhlF binding site, a more comprehensive gel shift analysis was undertaken using shorter DNA probes (Fig. 4). Fragments 2.9 and 7.U were previously determined to contain the PhlF binding site. A DNA fragment, 7EH, that spanned the overlap between these probes was constructed and analyzed by gel retardation (Fig. 5). PhlF-6xHis, used in the mobility shift assays, was purified according to the modified protocol described in Materials and Methods. It is clearly seen that the migration of fragment 7EH was retarded upon addition of PhlF. No retarded band was seen when a large excess of unlabeled 7EH DNA fragment was added along with PhlF protein to the 7EH labeled fragment.
![]() View larger version (9K): [in a new window] |
FIG. 4. Map of probes used in the mobility shift assays in this study. The names of probes are presented on the left of the figure. Binding of PhlF protein to the probes is indicated as + or -. IGR, intergenic region. The 5' ends of the phlA and phlF ORFs are indicated
|
![]() View larger version (65K): [in a new window] |
FIG. 5. Identification of the PhlF binding site. Probe 7EH (2 ng) was analyzed for reduced mobility in a native gel in the presence of 3 µg of purified PhlF. Lane 1 contains labeled 7EH probe; lane 2 contains labeled 7EH probe and 3 µg of PhlF-6xHis; lane 3 contains labeled 7EH probe, 3 µg of PhlF-6xHis, and an excess of unlabeled 7EH probe.
|
To address the possibility that weaker interactions between nucleotides within probe 7EH and PhlF stabilize or enhance binding of PhlF to the operator sequence phO, the PhlF footprint on probe 7EH was identified (Fig. 6). It was found that binding of PhlF to 7EH protected the three regions of the probe, designated boxes 1, 2, and 3. Box 1 is a 30-bp stretch of DNA that contains the inverted repeat sequence that has been designated the phO operator (Fig. 3). Boxes 2 and 3, 9 and 7 bp, respectively, are shorter stretches of DNA (Fig. 3). Box 2 is contained within probe p10d, and box 3 is contained within probe p9d, and since neither of these probes can bind PhlF, it is concluded that boxes 2 and 3 do not constitute primary PhlF binding sites. Interaction of PhlF with these boxes may, however, contribute to the stabilization of PhlF bound to the phO operator (box 1). Further support for the premise that phO constitutes the PhlF binding site came from analysis of mutations between the inverted repeat regions. Any sequence changes in this region abolished the ability of PhlF to bind the phO operator (data not shown).
|
View larger version (17K): [in a new window] |
FIG. 6. Footprint of PhlF. DNA probe 7EH that was bound by PhlF (lane 1) or unbound (lane 2) was treated with a chemical footprinting agent to locate the PhlF footprint. Three protected regions of the probe were identified and labeled 1, 2, and 3. The positions of these protected regions are shown in Fig. 3.
|
63 kDa) (Fig. 7). These results suggest that PhlF can dimerize in solution and may bind to the phO operator as a dimer. Although in vitro evidence of higher-order protein complexes was not obtained, it remains a possibility that the protein may bind DNA as a larger complex, for example, a tetramer.
![]() View larger version (47K): [in a new window] |
FIG. 7. PhlF forms a dimer in vitro. SDS-PAGE analysis of purified PhlF-6xHis samples (3 µg) without (lane 1) and with (lane 2) treatment with 10 mM glutaraldehyde. Midrange molecular size standards were loaded the left lane; sizes are shown in kilodaltons.
|
![]() View larger version (41K): [in a new window] |
FIG. 8. (A) Impact of PHL on the electrophoretic mobility of the PhlF-7EH probe complex. Increasing amounts of PHL were added to the binding mixture containing 3 µg of PhlF-6xHis and 2 ng of radiolabeled 7EH probe. Pro, free 7EH probe. Samples 1 to 11 contain 0 mM, 0.05 mM, 0.1 mM, 0.2 mM, 0.25 mM, 0.3 mM, 0.4 mM, 0.75 mM, 1 mM, 2 mM, and 3 mM PHL, respectively. (B) Mobility shift assay using an unrelated system composed of repressor protein cI2009 of phage Tuc2009 and a DNA fragment (2880 to 3030) from the genetic switch of Tuc2009. Lanes: Pro, probe without repressor; 0, probe with repressor cI2009; 3 mM, probe with repressor cI2009 and PHL (3 mM).
|
![]() View larger version (15K): [in a new window] |
FIG. 9. Salicylate enhances PhlF binding to phO. Binding reaction mixtures containing 2 ng of radiolabeled 7EH probe, 3 µg of PhlF-6xHis, and increasing amounts of PHL were prepared with or without 4 mM salicylate. Binding was measured by densitometry, and the relative PhlF binding activity in the presence and absence of salicylate was calculated for each concentration of PHL. This is presented as the natural log of the intensity of bound probe divided by the total intensity of the probe. Sal, salicylate.
|
|
|
|---|
To understand the mechanism by which PhlF represses phlA transcription, it was important to determine the transcriptional start of this gene and consequently to characterize its promoter. Our analysis suggests that the phlACBD operon is transcribed from a
70-dependent promoter. This conclusion is supported by the fact that overexpression of the housekeeping sigma factor rpoD resulted in increased PHL production (53, 64). Many
70-dependent promoters are regulated by transcriptional repressors that bind upstream of the transcriptional start site and impede binding of RNA polymerase. There are also examples, however, where repressors bind downstream of the transcription start site and function by interfering with promoter clearance (9). This is also the case with PhlF, which has its operator located at +140 to +169 relative to the phlA transcriptional start site.
Consistent with reports that downstream operators are less effective (50), repression by PhlF is not absolute. It is notable, however, that in addition to the phO operator, PhlF also interacts with two DNA regions closer to the transcription start site (Fig. 3 and Fig. 6). The length of these sequences (7 and 9 bp) and the fact that PhlF does not bind to oligonucleotides containing those sequences suggest these are not discrete PhlF binding sites. Rather, it is possible that PhlF bound at the phO operator interacts with these regions to form a more stable interaction. This suggests that binding of PhlF leads to significant structural reorganization of the phlA promoter, and this could also contribute to inhibition of transcription.
Some features of PhlF show similarities to those of the TetR repressor. First, the sequence and structure of the phl operator, phO, are very similar to those of the tetO operator located within the tetR-tetA intergenic region (2). Second, the putative helix-turn-helix motif present at the amino terminus of the PhlF protein (4, 12, 54) shows interesting similarities with the helix-turn-helix of TetR. Third, the active state of TetR is a homodimer (22), and we have shown in this study that PhlF forms a dimer in solution, suggesting that it may be active as a homodimer. Based on these similarities, it can be hypothesized that PhlF and TetR bind DNA in similar ways.
Mechanism of autoinduction. Many biosynthetic or degradation pathways are regulated by positive or negative feedback (5, 8, 18, 60). Recently, Schnider-Keel and colleagues showed that addition of PHL to the growth medium induced both production of PHL and expression of a phlA'-'lacZ gene fusion (54). Autoinduction by PHL required the phlF gene, but it was not determined whether PHL itself or a breakdown product was required, nor whether PhlF was directly or indirectly involved in the process. Using defined components in vitro, we established that PHL interacts directly with PhlF to reduce its binding to the phO operator. Furthermore, we also determined that the corepressor salicylate also acts directly via PhlF, this time to enhance its binding to phO. Since corepression by salicylate occurs even in the presence of high concentrations of PHL, it is speculated that autoinducer and corepressor recognize different sites on the PhlF protein.
To better characterize the PhlF interaction with the two secondary metabolites, a more detailed analysis is needed. Based on current data, however, we suggest that PHL interacts physically with PhlF and probably induces a conformational change such that the affinity of the repressor for phO drops, resulting in separation of the complex. Salicylate would stabilize the general structure of the repressor and therefore result in longer preservation of the complex. The concentrations of PHL and salicylate required for in vitro assays are higher than the concentrations used in the physiological study reported by Schnider-Keel et al. (54). The reason for that is not known, but it can be speculated that under physiological conditions, the PHL and the salicylate concentrations inside the cells may be significantly higher than those in the medium. Alternatively, it may be that aggregates of PhlF protein, which cannot bind DNA, are still capable of binding PHL or salicylate in the in vitro assays.
Conclusion.
Biosynthesis of PHL is regulated at the transcriptional level by PhlF. The phlA-phlF intergenic region displays a complex organization in that phlA is transcribed from a
70 RNA polymerase-dependent promoter that is likely to overlap the promoter of the divergently transcribed phlF gene. Repression by PhlF is due to its interaction with a specific sequence, phO, located downstream of the phlA promoter, suggesting that the repression may occur by inhibition of promoter clearance. This repression occurs only in the early log phase, after which the repressor is inefficient because of its interaction with the inducer, PHL. Salicylate can interact with PhlF to stabilize its interaction with the phlA promoter, leading to tighter repression of PHL production. Interaction of these secondary metabolites with PhlF may contribute to the complex regulation of PHL biosynthesis. Further work is required to determine how environmental signals and physiological cues combine to control PHL production.
This work was supported in part by grants awarded by the Higher Education Authority of Ireland Enterprise Ireland (SC/98/306 and SC/98/261), and the European Commission (BIO4-CT96-0027, BIO4-CT96-0181, FMRX-CT96-0039, and BIO4-CT98-0254).
Present address: Transducers Group, National Microelectronics Research Centre, Lee Maltings, Cork, Ireland. ![]()
Present address: Department of Molecular Biology, IRIS, Chiron S.P.A., 53100 Siena, Italy. ![]()
|
|
|---|
S and the stress response in Pseudomonas fluorescens Pf-5. J. Bacteriol. 180:6635-6641.
This article has been cited by other articles:
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Copyright © 2009 by the American Society for Microbiology. For an alternate route to Journals.ASM.org, visit: http://intl-journals.asm.org | More Info»