Previous Article | Next Article ![]()
Journal of Bacteriology, November 2002, p. 6146-6154, Vol. 184, No. 22
0021-9193/02/$04.00+0 DOI: 10.1128/JB.184.22.6146-6154.2002
Copyright © 2002, American Society for Microbiology. All Rights Reserved.
Institute of Molecular and Cellular Biosciences, University of Tokyo, Bunkyo-ku, Tokyo 113-0032, Japan
Received 23 May 2002/ Accepted 19 August 2002
|
|
|---|
|
|
|---|
IS1 generates the InsA protein from insA unless translational frameshifting occurs. The InsA protein, which has the ability to bind to terminal IR sequences (43, 52, 54), inhibits transposition of IS1 (24, 53). IS1 with a 1-bp insertion in the A6C sequence, causing the two frames insA and B'-insB to be in the same frame, produces transposase without frameshifting and can thus transpose at a very high frequency (37, 39). These facts suggest that the InsB segment in IS1 transposase forms a catalytic domain. Many elements with structural features similar to those seen in IS1 have been identified in various bacteria and their plasmids (for a review, see reference 28). Most of them are highly homologous to IS1 and to one another (more than 90% sequence identity), whereas a few, such as IS1(NuXi) from Shigella dysenteriae, have low homology, about 55% (31).
Transposases encoded by IS3 family elements and retroviral integrases have been found to have three acidic amino acid residues, D, D, and E, constituting a motif called the D-D-E motif, at positions where a polypeptide segment 35 amino acids long is usually present between the second D and third E residues (11, 23). The D-D-E motif has also been found in transposases encoded by IS630, Tn7, Tn552, and others and in integrases encoded by retrotransposons (7, 34). Transposases encoded by IS10 and phage Mu also have the D-D-E motif, but a longer polypeptide segment of 130 or 55 amino acids is present between the second D and the E (4, 5, 49). The polypeptide segment with the D-D-E motif forms a catalytic domain in which the three acidic amino acid residues have an essential role in capturing Mg2+ and other divalent cations (4). Tertiary structures of the catalytic core domains of human immunodeficiency virus type 1 (HIV-1) integrase and phage Mu transposase (MuA) and full-length Tn5 transposase have been determined by X-ray crystallography (6, 9, 35). These proteins characteristically have three ß sheets in tandem in the segment with the D-D-E motif, such that the first D residue is present in the first ß sheet.
The transposase encoded by IS1 has been thought not to belong to the family of proteins with the D-D-E motif but to the phage
integrase (Int) family (44) because IS1 transposase has the H-R-Y motif, which is conserved in all the Int family proteins (1, 3). In this study, we report that several IS1 family elements with rather low homology to IS1 are present not only in eubacteria but also in archaebacteria and that the transposases encoded by these IS1 family elements have three acidic amino acid residues (D, D, and E) that are conserved in corresponding positions. We show that these three acidic amino acid residues constitute a functional D-D-E motif with the shortest polypeptide segment, only 24 amino acids in length, between the second D and the E residues of all those in the family of proteins with the D-D-E motif.
|
|
|---|
Media.
Culture media used were L broth, L-rich broth,
-medium (51), and SOC medium (8). L-agar plates contained 1.5% (wt/vol) agar (Wako) in L broth. When necessary, ampicillin, chloramphenicol, spectinomycin, kanamycin, or arabinose was added to the media.
Enzymes and synthetic oligonucleotide primers. Restriction endonucleases AatII, BamHI, BglII, BslI, BstEI, MluI, SalI, Tsp509I, and XhoI (New England Biolabs or Takara), T4 DNA ligase, and DNA polymerase I (Klenow fragment) (Takara) were used as recommended by the suppliers. Synthetic oligonucleotide primers used are listed in Table 1. Oligonucleotides were obtained from Sawady Technology. Most of these primers were used for PCR, which was performed as described previously (42).
|
View this table: [in a new window] |
TABLE 1. Oligonucleotide primers used in this studya
|
Construction of pSIN plasmids. The pSIN plasmids carry the mutant transposase gene that produces mutant transposase with an amino acid substitution (see Fig. 6 in the Results section). pSIN1 was constructed by replacing the MluI-BglII fragment of the IS1 transposase gene in pKEN200G with the MluI-BamHI fragment, which was obtained by PCR with BstBI-digested pKEN200G DNA as the template and with primers P1 and P2, followed by digestion with MluI and BamHI. Five pSIN plasmids (pSIN3, pSIN7, pSIN8, pSIN27, and pSIN36) were constructed as described above with the MluI-BamHI fragment derived from the PCR product amplified with primers P1 and P4, P1 and P6, P1 and P7, P1 and P25, and P1 and P33, respectively.
![]() View larger version (66K): [in a new window] |
FIG. 6. Mini-IS1 transposition mediated by mutant transposases. The amino acid sequence of IS1 transposase is shown at the top. In this sequence, boldface letters indicate acidic amino acids. Solid and open circles above the sequence indicate acidic amino acids constituting the D-D-E motif and other acidic amino acids, respectively. Frequencies of mini-IS1 transposition mediated by wild-type (w.t.) and mutant transposases are shown by the graph at the bottom. pSIN plasmids that produced mutant transposases with amino acid substitutions are shown. Results from the analysis of mutant transposases with substitutions for the same amino acid residue are boxed.
|
pSIN11 was constructed by replacing the AatII-SalI fragment with the AatII-XhoI fragment derived from the PCR product amplified with primers P8 and P9. pSIN18 was constructed by replacing the BstEII-SalI fragment with the BstEII-XhoI fragment from the PCR product amplified with primers P19 and P20.
pSIN14 was constructed as follows. Two fragments were first obtained by PCR with primers P1 and P13 or P10 and P14 and treated with DNA polymerase I. The two fragments were used as templates for PCR with primers P10 and P1 to derive the AatII-BamHI fragment. pSIN14 was then constructed by replacing the AatII-BglII fragment with the AatII-BamHI fragment. Similarly, pSIN15 was constructed by using three pairs of primers, P1 and P15, P10 and P16, and P1 and P10.
pSIN29 was constructed as follows. One fragment was obtained by PCR with primers P1 and P26 and treated with BslI and BamHI, whereas the other was obtained by PCR with primers P10 and P27 and treated with MluI and BslI. pSIN29 was constructed by replacing the MluI-BglII fragment with the BslI-BamHI and BslI-MluI fragments. Similarly, pSIN37 was constructed with two fragments from the two PCR products amplified with two pairs of primers, P1 and P26, and P10 and P34.
pSIN30 (or pSIN37) was constructed by replacing the AatII-BglII fragment with the Tsp509I-BamHI and Tsp509I-AatII fragments, which were obtained by PCR with two pairs of primers, P1 and P28 (or P1 and P29) and P10 and P29 (or P10 and P35), respectively.
All mutations introduced into the transposase gene were confirmed by DNA sequencing.
DNA sequencing. DNA sequencing was carried out by the dideoxynucleotide chain termination method with an ABI Dye terminator cycle sequencing kit (Applied Biosystems) with AmpliTaq DNA polymerase FS (Perkin-Elmer) and an oligodeoxyribonucleotide primer, pKENseq/K (5'-ATTGGTTGTAACACTGG-3') or pKENseq/B (5'-GGCCGACGAAATCACTC-3'). The sequencing reaction was performed with Catalyst A800 (Perkin-Elmer), and the reaction products were analyzed with the ABI 377 DNA sequencing system (Applied Biosystems).
IS1 transposition assay.
Three plasmids, pNS17, pSEK80, and pKEN200G (or a pSIN plasmid), were introduced by transformation into E. coli strain NM554 in
-medium. Cells were grown in 5 ml of L-rich broth at 37°C overnight. The cell culture (75 µl) was added to 5 ml of fresh L-rich broth and incubated by shaking at 37°C. When the optical density was 0.4, 100 µl of 10% arabinose was added to the cell culture. After incubation of the culture at 37°C for 16 h, plasmid DNAs were extracted from cells with a Quantum Prep plasmid miniprep kit (Bio-Rad). The plasmid DNA prepared was dissolved in 10 µl of water, and 1 µl of this solution was used for electroporation into cells of JE6638 (polA1) with a Gene Pulser (Bio-Rad). The cells were incubated in 1 ml of SOC medium at 37°C for 1 h and plated on L-agar plates containing 100 µg of spectinomycin and 150 µg of chloramphenicol per ml and also on L-agar plates containing 100 µg of spectinomycin per ml. After incubation of the plates at 37°C overnight, the number of colonies was counted. Transposition frequency was calculated by dividing the number of Spr Cmr transformants by the number of Spr transformants.
|
|
|---|
ISEhe5, ISY120, ISSt796, and ISMac740 were 787, 802, 796, and 740 bp in length, respectively, as large as IS1 and IS1(NuXi), which are 768 and 766 bp, respectively (Fig. 1). These IS elements had terminal IR sequences 19 to 23 bp in length, as large as the IRs of 23 bp in both IS1 and IS1(NuXi) (Fig. 1). ISC1173 and ISSt1173 were 1,174 and 1,173 bp in length, respectively, which is larger than those of the other elements (Fig. 1). These two elements have IRs 44 and 50 bp in length, respectively, larger than those of the other elements (Fig. 1).
![]() View larger version (49K): [in a new window] |
FIG. 1. Structures of IS1 family elements and terminal IR sequences. In the structures shown on the left panel, left- and roght-terminal IRs, IRL and IRR, are indicated by solid triangles. Horizontal thick arrows indicate ORFs. In the elements having two ORFs, the positions of a run of adenines present in the overlapping region between the two ORFs are indicated by broken vertical lines. Numbers are coordinates given to each element, in which the nucleotide at the end of IRL is defined as 1. Names of host species are given in parentheses. Nucleotide sequences of the terminal regions containing IRL and IRR are shown on the right panel in the direction 5' to 3'. Boldface letters indicate IR sequences, and asterisks show nucleotides that are identical between two IR sequences. ISC1173 and ISSt1173 have long IR sequences of 44 and 50 bp, but the entire sequences of these are not shown.
|
Presence of three acidic amino acids conserved in transposases encoded by IS1 family elements. ISEhe5, ISY120, and ISMac740 were found to have two ORFs which appeared to correspond to insA and insB of IS1 and IS1(NuXi) (Fig. 1). In the overlapping region between the two ORFs in ISEhe5, ISY120, and ISMac740, a run of adenines were present, as in the region between insA and insB of IS1 and IS1(NuXi) (Fig. 1). This suggests that ISEhe5, ISY120, and ISMac740 also produce their transposases by translational frameshifting, as do IS1 and IS1(NuXi). Interestingly, however, ISSt796, ISC1173, and ISSt1173 were found to have only one ORF (Fig. 1).
The amino acid sequences of the transposases encoded by the IS1 family elements were aligned (Fig. 2). Note here that the transposases encoded by IS1(NuXi), ISEhe5, ISY120, and ISMac740 with two ORFs were defined as transframe proteins produced by -1 translational frameshifting occurring at the run of adenines present in the overlapping region between the two ORFs, similar to the transposase encoded by IS1. The alignment revealed that several amino acid residues were conserved in all the transposases in positions corresponding to those in IS1 transposase (Fig. 2). This shows that all the elements examined are closely related to one another and supports the above assumption that they are members of the IS1 family.
![]() View larger version (54K): [in a new window] |
FIG. 2. Alignment of transposases encoded by IS1 family elements. The amino acid sequences of transposases encoded by eight elements (IS1, IS1[NuXi], ISEhe5, ISY120, ISMac740, ISSt796, ISC1173, and ISSt1173) are aligned. Numbers are coordinates given to the amino acid sequence of IS1 transposase. Amino acid residues constituting the D-D-E motif are shadowed. The other amino acid residues conserved in all the elements or in seven of eight elements are shown in boldface. Asterisks indicate amino acid residues that are thought to constitute the H-R-Y motif (44). The sequence encoded by insA in each transposase is underlined.
|
![]() View larger version (14K): [in a new window] |
FIG. 3. Phylogenetic tree of IS1 family elements. The tree was constructed by the neighbor-joining method based on the amino acid sequences of transposases encoded by IS1 family elements.
|
![]() View larger version (86K): [in a new window] |
FIG. 4. Alignment of transposases and integrases. Polypeptide segments including D, D, and E and constituting the D-D-E motif in transposases encoded by IS1 family elements, other ISs or transposons (IS3, IS630, Tn3, Tn5, Tn7, Tn552, and Tc1), phage Mu transposase (MuA), integrases of retroviruses (HIV-1, Rous sarcoma virus [RSV], and Moloney murine leukemia virus [MoMLV]), and retrotransposons (Ty3-2, Gypsy, and Copia) are shown. Acidic amino acids constituting the D-D-E motif are shadowed, and other conserved amino acids are shaded. Amino acids frequently observed at each of several positions are shown at the top.
|
![]() View larger version (41K): [in a new window] |
FIG. 5. Comparison of secondary structures of transposases and an integrase. Secondary structures of the polypeptide segments with the D-D-E motif in transposases encoded by IS1 family elements were predicted by PSIPRED and are shown under the polypeptide sequence of each element. Secondary structures based on the tertiary structures of transposases encoded by phage Mu and Tn5 and HIV-1 integrase (PDB codes: 1BCM, 1F3I:M, and 1BHL, respectively) are shown above the polypeptide sequence of each element. -Helices are indicated by ribbons, whereas ß sheets are indicated by arrows. Other features are indicated by straight solid lines. Positions of acidic amino acids constituting the D-D-E motif are indicated by vertical broken lines.
|
With the software program PSIPRED, the secondary structures of the polypeptide segments with the D-D-E motif in HIV-1 integrase, phage Mu transposase (MuA), and Tn5 transposase were deduced, as shown schematically in Fig. 5. The deduced secondary structures were generally similar to those based on their tertiary structures except that the segments with the D-D-E motif in the Mu and Tn5 transposases do not have the first ß sheet but instead have two short ß sheets flanking a sequence of 3 or 4 amino acids including the first D residue (Fig. 5). This difference may be derived from the parameters used for predicting the secondary structure.
It should be noted here that the secondary structures deduced for the integrase and transposases are similar to those of transposases from the four IS1 family elements IS1, ISSt796, ISC1173, and ISSt1173 (see Fig. 5). This suggests that the regional segment including the first D actually forms one ß sheet even in transposases encoded by the four IS1 family elements. This hypothesis should be considered when discussing the difference between the secondary structure based on the tertiary structure and that deduced by PSIPRED in the phage Mu and Tn5 transposases. The similarity in the secondary structures also supports the suggestion that transposases encoded by the IS1 family elements have the D-D-E motif.
IS1 transposition mediated by mutant transposases. We have developed a genetic assay system for the transposition of IS1. pNS17 is an ampicillin resistance (Apr) plasmid carrying mini-IS1, which has the chloramphenicol resistance (Cmr) gene replacing the transposase-coding region in IS1 (46). Mini-IS1 in this plasmid can transpose to the spectinomycin resistance (Spr) plasmid pSEK80 harbored within the same cell of E. coli strain NM554 when transposase is supplied from the kanamycin resistance (Kmr) plasmid pKEN200G, which produces IS1 transposase without translational frameshifting due to the presence of the sequence GA2GA3C in place of the A6C sequence (46). The IS1 transposase gene in pKEN200G can be expressed from a promoter induced by arabinose.
Therefore, for the actual experiment, NM554 cells harboring the three plasmids were grown overnight in broth containing arabinose. Plasmid DNA extracted from the cells was introduced by electroporation into E. coli strain JE6638(polA1), in which pNS17 carrying mini-IS1 cannot replicate, and thus, cells harboring target plasmids with mini-IS1 can be selected as Spr Cmr transformants (see Materials and Methods). In this system, the Spr Cmr transformants were obtained at a frequency of 1.4 x 10-4 per target plasmid (Fig. 6).
To see whether the three acidic amino acid residues (D109, D166, and E191) in IS1 transposase constitute a functional D-D-E motif, we constructed pSIN plasmids, derivatives of pKEN200G, producing mutant transposases with an amino acid substitution for each of the three acidic amino acids and measured the transposition frequency of mini-IS1 as described above. Mutant transposases with an alanine substitution (D109A, D166A, or E191A) mediated transposition of mini-IS1 at a greatly reduced frequency, 1/1,000th or less of that in wild-type transposase (Fig. 6). Mutant transposases with glutamic acid (or aspartic acid) instead of aspartic acid (or glutamic acid) (D109E, D166E, or E191D) or with asparagine (or glutamine) instead of aspartic acid (or glutamic acid) (D109N, D166N, or E191Q) also mediated transposition of mini-IS1 at a greatly reduced frequency, similar to that of those with an alanine substitution (Fig. 6). These results show that the three acidic amino acids, D109, D166, and E191, are important for transposition of IS1 and thus constitute a D-D-E motif.
We also constructed pSIN plasmids producing mutant transposases with an alanine residue substituted for each of the 11 acidic amino acid residues other than those in the D-D-E motif in the IS1 transposase (see Fig. 6) and measured the frequency of transposition of mini-IS1, as described above. Each of eight mutant transposases with a substitution (D15A, D58A, D101A, E107A, E142A, D159A, E172A, or D216A) mediated transposition of mini-IS1 at almost the same frequency as that in wild-type transposase or at a slightly lower frequency (Fig. 6). Each of the remaining three mutant transposases with a substitution (E110A, D129A, or D219A) mediated transposition of mini-IS1 at a reduced frequency, about 1/100th of that in wild-type transposase (Fig. 6).
We then constructed plasmids encoding mutant transposases with different amino acid substitutions for each of these three amino acid residues (E110Q, E110D, D129N, D129E, D219N, and D219E) and measured the frequency of mini-IS1 transposition. Each of the mutant transposases mediated transposition of mini-IS1 as efficiently as the mutant transposases with E110A, D129A, or D219A (Fig. 6). These results suggest that the 11 acidic amino acid residues are functionally less important than those in the D-D-E motif.
|
|
|---|
It is assumed that the high frequency of transposition of an IS element causes deleterious effects on host cells. Some IS elements, such as IS1 and IS3, have two ORFs, and the product from one of the two ORFs acts as the negative regulator, inhibiting transposition of each element (24, 40, 53). These IS elements produce transposases as a transframe protein by translational frameshifting between the two ORFs (10, 37, 38, 41). This is thought to be another negative regulatory mechanism for the transposition of IS elements, because the frameshifting occurs at low efficiency, resulting in the production of a limiting amount of transposase (28). The IS1 family elements with only one ORF may therefore have a different regulatory mechanism(s) from those involved in the transposition of IS1 and IS3.
In this study, we have shown that the three acidic amino acids D109, D166, and E191 in IS1 transposase are conserved in corresponding positions in the transposases encoded by all the IS1 family elements. We also showed that the polypeptide segments including the three acidic amino acids are similar in primary structure as well as in secondary structure to those of the family of proteins with the D-D-E motif. The mutant IS1 transposases with an amino acid substitution for each of the three acidic amino acids lost the ability to promote transposition of IS1 almost completely. A few transposition products from the IS1 mutants were generated, probably due to the presence of six copies of IS1 in the chromosome of E. coli K-12 (48), in which even mutants with a deletion within IS1 can transpose at a very low frequency by the action of transposase produced from these IS1 copies (25).
In fact, the IS1 mutants producing transposases with an amino acid substitution for each of the three acidic amino acids did not transpose at all in E. coli strain ECOR46 (unpublished results), which is known to have no IS1 (36). These findings show that the three acidic amino acids are critically important for transposase to mediate transposition of IS1 and thus appear to constitute a D-D-E motif. This indicates that the transposase encoded by IS1, one of the smallest transposable elements in bacteria, also belongs to this family of proteins, including most transposases and integrases encoded by other transposable elements. The D-D-E motif identified in IS1 transposase, however, differs from those in the other elements in that the length of the polypeptide segment between the second D and the E is the shortest, 24 amino acids in length. Because of this difference, the presence of the D-D-E motif in IS1 transposase was not clarified for a long time, although IS1 was one of the first elements discovered in bacteria.
Previously, IS1 transposase was thought to belong to the Int family with the H-R-Y motif (44). All Int family proteins have histidine, arginine, and tyrosine residues constituting the H-R-Y motif in corresponding positions (1, 3). However, these amino acid residues in IS1 transposase (H200, R203, and Y231 [44]) are not found in corresponding positions in transposases encoded by the other IS1 family elements. This suggests that these three amino acid residues do not constitute the active center of IS1 transposase. In fact, the mutant IS1 transposases with amino acid substitution H200R or Y231A were able to promote transposition of mini-IS1 (data not shown), supporting this hypothesis.
|
|
|---|
This article has been cited by other articles:
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Copyright © 2009 by the American Society for Microbiology. For an alternate route to Journals.ASM.org, visit: http://intl-journals.asm.org | More Info»