Previous Article | Next Article ![]()
Journal of Bacteriology, March 2002, p. 1661-1668, Vol. 184, No. 6
0021-9193/02/$04.00+0 DOI: 10.1128/JB.184.6.1661-1668.2002
Copyright © 2002, American Society for Microbiology. All Rights Reserved.
Unidad de Biofísica (CSIC-UPV/EHU) and Departamento de Bioquímica, Universidad del País Vasco, 48080 Bilbao,1 Departamento de Biología Molecular (Unidad Asociada al CIB, CSIC), Universidad de Cantabria, 39011 Santander,2 Grupo de Cristalografía Macromolecular y Biología Estructural, Instituto de Química Física Rocasolano, CSIC, E-28006 Madrid, Spain3
Received 2 October 2001/ Accepted 27 December 2001
|
|
|---|
|
|
|---|
TrwD, also a member of the VirB11 family, is encoded by conjugative plasmid R388. This plasmid contains one of the simplest gene organizations known for a conjugative transfer system (8). The trwD gene is located in PILW, the R388 region involved in pilus formation. Many TrwD homologues are known (35), and many have functions unrelated to conjugation. TrwD was cloned and purified by us as a glutathione S-transferase (GST)-TrwD fusion protein (35). The fusion protein was functionally active, as shown by genetic complementation assays. It displayed ATP hydrolase activity that was essential for R388 conjugation. When the conserved lysine residue of the nucleotide-binding site (Walker box) of TrwD was replaced with glutamine, the mutant form (K203Q) lacked ATPase activity and had a dominant negative effect on conjugation, suggesting that the mutation did not abolish the capacity of TrwD to interact with other components of the conjugative machinery (35). Recent work has shown that TrwD, together with other members of the VirB11 family, gives rise to hexameric ring structures (21, 22)
Several observations point toward an interaction of TrwD with bacterial membranes, namely, (i) the fact that the purification yield increased in the presence of 0.5 M NaCl, as is often the case with peripheral membrane proteins; (ii) TrwD was found to be at least partially associated with the bacterial outer membrane; and (iii) the ATPase activity of TrwD increased in the presence of mixed micelles of detergent and phospholipids (35). In view of these data, an investigation was undertaken to explore specifically the interaction of TrwD with membranes. With this purpose, native and mutant (K203Q) forms of TrwD were prepared as described previously (35). Small unilamellar vesicles (SUV) and large unilamellar vesicles (LUV) with defined lipid compositions were used as model membranes. Results showed that, under our conditions, TrwD induced vesicle aggregation with leakage of vesicular aqueous contents and intervesicular lipid mixing but no intervesicular mixing of aqueous contents (fusion). Recently, Yeo et al. (44) have reported the crystal structure of protein HP0525, another member of the TrwD family whose conformation shows close similarities to the predicted secondary structure of TrwD. Yeo et al. (44) showed that the N-terminal domain of the protein contains a hydrophobic surface and suggested that this region of the protein is responsible for membrane association. We suggest that the membrane-active character of TrwD, shown by the experiments presented in this work, is caused by a similar hydrophobic region in our protein.
|
|
|---|
Egg phosphatidylcholine (PC) and egg phosphatidylglycerol (PG) were grade I from Lipid Products (South Nutfield, United Kingdom). Cardiolipin (CL), cholesterol (Ch), and Triton X-100 were purchased from Sigma. Egg sphingomyelin was from Avanti Polar Lipids (Alabaster, Ala.). 1-Aminonaphthalene-1,3,6-trisulfonic acid (ANTS), p-xylenebis(pyridinium bromide) (DPX), and octadecylrhodamine B (R18) were supplied by Molecular Probes, Inc. (Eugene, Oreg.). N-(7-Nitro-2,1,3-benzoxadiazol-4-yl) (NBD)-phosphatidylethanolamine (PE) and N-(lissamine rhodamine B-sulfonyl)-dioleoyl PE (rhodamine-PE) were obtained from Avanti. The lipids were mixed in organic solvent, evaporated thoroughly under a stream of N2, and left under a vacuum for at least 2 h to remove traces of solvent. The dry lipid film was then dispersed in the appropriate aqueous solution. SUV were prepared by sonication with an MSE (Crawley) probe (10- to 12-µm amplitude) for 40 min at 4°C (1). Vesicle size was measured by quasielastic light scattering (QELS) in a Malvern Zetasizer 4 spectrometer. For QELS measurements, the buffer had been previously filtered through 0.22-µm-pore-size filters. The average diameter of the vesicles was 45 to 55 nm.
LUV were prepared by the extrusion method of Mayer et al. (24) using Nuclepore filters with a 0.1-µm pore diameter at room temperature. QELS measurements revealed an average diameter of 110 to 120 nm for these large vesicles.
Destabilization of vesicle bilayers by TrwD. To monitor the interaction of TrwD with model membranes, fluorescence measurements were done with a Shimadzu RF-540 spectrofluorometer. Samples containing a 0.2 mM lipid concentration in the form of vesicles were used; the process was initiated by addition of TrwD protein (concentration, 17 nM) to a protein-lipid ratio of 1:12,000. Samples were continuously stirred. The buffer contained 50 mM Tris-HCl (pH 7.5), 100 mM NaCl, and 10 mM CaCl2 unless otherwise stated. All experiments were done at 25°C.
Vesicle aggregation assays. Vesicle aggregation was estimated as an increase in the amount of light scattered by the suspension with both the excitation and emission monochromators of the spectrofluorometer at 520 nm.
Lipid mixing. Lipid mixing was measured by dilution in the bilayer of self-quenching probe R18 as described by Hoekstra et al. (20). The 0% fluorescence level (or 0% mixing) was determined from a 1:4 mixture of 8 mol% R18 containing liposomes and R18-free liposomes. The fluorescence of the same amount of liposomes with the diluted probe uniformly distributed, i.e., 1.6 mol% R18-containing liposomes, was taken as the 100% fluorescence level or 100% lipid mixing.
Alternatively, lipid mixing was assayed by the resonance energy method of Struck et al. (40) using NBD-PE and rhodamine-PE. A modification of the latter method, proposed by McIntyre and Sleight (25), was used to measure the mixing of inner monolayer lipids. In this procedure, vesicles containing NBD-PE and rhodamine-PE are treated with sodium dithionite so that the fluorophores are reduced and their fluorescence is quenched. Since the bilayer is relatively impermeable to dithionite, the fluorophores located in the inner monolayer remain unquenched and most of the signal arises from fluorescence probes in the inner monolayer. Excess dithionite is then removed by passing the vesicle suspension through a Sephadex G-75 column. TrwD-induced lipid mixing in these vesicles actually reports on the intermixing of inner vesicle monolayers.
Mixing and release of aqueous contents. Mixing of vesicle aqueous contents and vesicle leakage were estimated by using the ANTS/DPX fluorescent probe system described by Ellens et al. (15). The osmolality of intra- and extravesicular solutions was measured in a cryoscopic osmometer (Osmomat 030; Gonotec, Berlin, Germany) and adjusted to 0.3 osmol/kg by addition of NaCl. Fluorescence scales were calibrated for fusion and release assays as described previously (28). The excitation wavelength was adjusted to 355 nm. An interference filter (470 nm) was used to avoid scattered excitation light.
Protein binding to vesicles. To measure the parameters of TrwD binding to membranes, 0.5 mM LUV in D2O-buffer (50 mM Tris-HCl [pH 7.5] and 100 mM NaCl in D2O) were incubated with protein (0.1 to 1.0 µM in D2O-buffer) and centrifuged at 513,000 x g under conditions leading to vesicle flotation, as described by Pereira et al. (32). Protein concentrations in appropriate samples were determined by comparison with known amounts of TrwD in Coomassie blue-stained gels after sodium dodecyl sulfate-polyacrylamide gel electrophoresis. Bands were quantified by using the Quantity One software in a Fluor-S MultiImager (Bio-Rad). Lipid concentration was determined by using the fluorescent probe rhodamine-PE mentioned above.
|
|
|---|
Studies with sonicated SUV. Divalent cations often play a substantial role in macromolecular assemblies and in membrane processes. Since Mg2+ was seen to facilitate aggregation in the preliminary experiments described above, the effects of various concentrations of Mg2+ and Ca2+ on TrwD-induced vesicle aggregation were tested (Fig. 1). In general, Ca2+ was more potent than Mg2+ in facilitating aggregation (note the different ordinate scales in Fig. 1A and B). Consequently, all further experiments, unless otherwise stated, were done with 10 mM CaCl2-100 mM NaCl-50 mM Tris-HCl (pH 7.5) buffer. When TrwD ATPase activity was tested, Mg2+ allowed higher activities than Ca2+, as expected for an ATPase. This underlines the twofold activity of TrwD, as a membrane-active protein and as an ATPase.
![]() View larger version (24K): [in a new window] |
FIG. 1. Influence of divalent cations on TrwD-induced aggregation of SUV composed of PC-CL at an equimolar ratio. Vesicle aggregation was assayed as an increase in light scattering (520 nm) by the suspension. SUV were suspended in 100 mM NaCl-50 mM Tris-HCl buffer (pH 7.5) with additions as follows: A, MgCl; B, CaCl2. Curves: a, 0 mM; b, 1 mM; c, 2.5 mM; d, 5 mM; e, 10 mM. Protein was added at 60 s.
|
TrwD-elicited vesicle aggregation was dose dependent, as shown in Fig. 2, and the slope of the aggregation-versus-time curves increased linearly between 4 and 400 nM protein at a constant vesicle concentration.
![]() View larger version (19K): [in a new window] |
FIG. 2. Dose dependence of SUV aggregation induced by TrwD. (A) Selected examples: curves 1 to 4 correspond to experiments in which protein concentrations were, respectively, 8, 17, 20, and 100 nM. Curve c corresponds to a control experiment in which the protein (100 nM) had been heat denatured prior to its addition to the vesicle suspension. (B) Initial slopes of the scattering-versus-time curves plotted as a function of the TrwD concentration. A.U., arbitrary units.
|
![]() View larger version (26K): [in a new window] |
FIG. 3. Effects of TrwD on SUV stability. Curve a shows vesicle aggregation, which was assayed as an increase in light scattering (520 nm) by the suspension. Curve b shows intervesicular lipid mixing, which was measured by dilution in the bilayer of self-quenching probe R18. The excitation and emission wavelengths were, respectively, 560 and 590 nm. Curve c shows release of vesicular aqueous contents, which was estimated with the ANTS/DPX fluorescent probe system. The excitation and emission wavelengths were, respectively, 355 and 520 nm. Curve d shows intervesicular mixing of aqueous contents, which was also measured with the ANTS/DPX system. In all cases, SUV composed of PC-CL at a 1:1 molar ratio were used. Phospholipid and protein concentrations were, respectively,0.2 mM and 17 nM.
|
TrwD induced aggregation of LUV composed of PC-CL at a 1:1 molar ratio (Fig. 4A). The relative increase in turbidity was smaller than that obtained with SUV (compare with the data in Fig. 3). This could be due to a variety of reasons, chief among them the larger basal turbidity of LUV suspensions and the larger size, and thus the smaller diffusion coefficient, of LUV. Both of these reasons also explain why aggregation of LUV occurs at a much lower rate than that of SUV (compare Fig. 3 and 4A). The K203Q mutant was indistinguishable from the native protein in its vesicle-aggregating properties. Vesicle aggregation induced by TrwD in the presence of 3 mM Mg2+-ATP gave exactly the same results as shown in Fig. 4A in the absence of nucleotide.
![]() View larger version (17K): [in a new window] |
FIG. 4. Effects of TrwD on LUV stability. (A) Vesicle aggregation measured as light scattering (520 nm). (B) Intervesicular lipid mixing measured by the R18 method (continuous line) and intervesicular mixing of aqueous contents (dotted line) measured as described in the legend to Fig. 3C. (C) Intervesicular mixing of inner monolayer lipids measured as described by McIntyre and Sleight (25) with NBD-PE and rhodamine-PE. (D) Release of vesicular aqueous contents measured as described in the legend to Fig. 3. Phospholipid and protein concentrations were as described in the legend to Fig. 3. N and M refer to the native and mutant forms of TrwD, respectively.
|
As mentioned above, PC-CL vesicles have a spontaneous tendency to aggregate; therefore, the results shown in Fig. 4 correspond to the TrwD-induced spectroscopic signal after subtraction of the spontaneous signal. This is explicitly shown in Fig. 5 for a representative example.
![]() View larger version (21K): [in a new window] |
FIG. 5. Influence of spontaneous aggregation and lipid mixing in LUV consisting of CL-PC at a 1:1 ratio. The lipid concentration was 0.2 mM. Panels: A, vesicle aggregation; B, intervesicular lipid mixing. Curves: 1, experimentally observed effect upon addition of 17 nM TrwD; 2, experimentally observed effect upon mixing of the vesicles with a buffer containing 10 mM calcium in the absence of protein; 3, difference (curve 1 minus curve 2). Curve 3 is an example of the corrected signals depicted in Fig. 1 to 4. A.U., arbitrary units.
|
The NBD-PE/rhodamine-PE method has the advantage that it can be modified to reveal specifically the intermixing of lipids in the inner monolayer of the vesicles. This is achieved by reducing with sodium dithionite the fluorescent probes in the outer monolayer, thus quenching their fluorescence. Excess dithionite is then removed with a Sephadex G-75 column (25). Mixing of inner monolayers should normally occur when complete vesicle fusion (i.e., mixing of lipids and contents) is taking place. As seen in Fig. 4C, no significant mixing of inner monolayer lipids was elicited by the native or mutant form of TrwD. In agreement with these observations, intervesicular mixing of aqueous contents failed to occur to any significant extent (Fig. 4B, dotted line), thus confirming the absence of vesicle fusion.
Finally, leakage of aqueous contents from LUV was also studied. TrwD induced release of vesicular contents (Fig. 4D) but to a much smaller extent than in the case of SUV. This is a case in which the metastable character of SUV led to a response different from that produced by the more stable LUV, as will be discussed below.
In summary, TrwD specifically induced vesicle aggregation, intervesicular lipid mixing, and release of aqueous vesicular contents but not complete vesicle fusion. Very similar results were obtained with SUV and LUV, the differences observed between the two systems being due mainly to the inherent properties of the respective bilayers. The mechanism by which TrwD produced these effects is independent from its ATP hydrolase activity and may be related to the presence of exposed hydrophobic regions in the protein, as proposed below.
TrwD binding to LUV. In order to quantify TrwD binding to membranes, LUV were mixed with the protein in D2O-buffer and centrifuged at high speed under conditions leading to vesicle flotation as described by Pereira et al. (31, 32). Vesicle-bound and free proteins are expected to separate under these conditions. For total TrwD concentrations ranging from 0.1 to 1.0 µM, 45% ± 15% (n = 8) of the total protein became incorporated into the liposome fraction, remaining in the upper fraction of the tube, while the free protein sedimented at the bottom. (Fig. 6). This is in agreement with the previous finding that the protein is found partly free and partly membrane bound in the cell (35).
![]() View larger version (47K): [in a new window] |
FIG. 6. Ultracentrifugation experiment to demonstrate protein incorporation into liposomes. TrwD at 0.7 µM was incubated with 0.5 mM LUV composed of PC-CL at a 1:1 ratio in D2O-buffer for 15 min. The sample was ultracentrifuged at 513,000 x g, and 200-µl fractions were collected (1 [top] to 5 [bottom]). A 200-µl volume of extra buffer was added to the tube to resuspend any remaining protein and lipid (fraction 6). TrwD concentration was determined after sodium dodecyl sulfate-polyacrylamide gel electrophoresis by comparison with known standards, as shown at the top. The lipid concentration was determined by measuring the fluorescence signal of rhodamine-PE. The graph at the bottom shows the results (average ± the standard error of the mean) of eight experiments with total TrwD concentrations in the 0.1- to 1.0-µM range.
|
|
|
|---|
TrwD-induced membrane perturbation. The precise effect of TrwD on bilayer architecture is defined by the experiments in Fig. 2 to 4. The protein induces vesicle aggregation in a dose-dependent way. Aggregation usually occurs as a mechanism by which to avoid contacts between water and hydrophobic molecules. This is, e.g., the mechanism of liposome aggregation due to the in situ production of diacylglycerol by phospholipase C (4). In the present case, TrwD binding to (and perhaps partial insertion into [see below]) the lipid bilayer may lead to exposure of the membrane hydrophobic matrix. Alternatively, the protein may expose additional hydrophobic areas on its surface upon binding of the bilayer. Any of these phenomena would explain the observed aggregation.
Leakage of vesicular contents occurs concomitantly with aggregation. Leakage is more extensive in SUV, and it probably occurs by a different mechanism in the small and large molecules. In the latter, partial leakage is probably a mere consequence of the lipid rearrangements secondary to protein insertion, as occurs with magainins (23) or with E. coli
-hemolysin (37). In SUV, however, because of their lateral tension, protein insertion probably leads to opening up of the vesicle, which behaves like a punctured balloon, so that vesicular contents are rapidly released. The remnants of the bilayer then reassemble into a new vesicle. This mechanism of lysis and reassembly has been shown to operate for surfactants acting on SUV (1, 14), and it may work as well for amphiphilic protein domains.
A third effect of TrwD on liposomes is to induce intervesicular lipid mixing. This phenomenon requires an intimate degree of contact between vesicles, beyond the mere aggregation, that excludes water molecules from the vesicle contact area (6). In our case, the data from SUV and LUV concur in presenting a phenomenon of lipid mixing that never goes beyond 50% of the total lipid. In addition, it is limited to the outer monolayer (Fig. 4C) and is not accompanied by mixing of aqueous contents (Fig. 3 and 4B). Hence, TrwD appears to induce a phenomenon that has been called hemifusion (10) or close apposition (41) of vesicles, i.e., mixing of outer lipid monolayers but not the inner compartments.
The nature of TrwD-bilayer interaction. Although the required presence of a negatively charged lipid may speak in favor of electrostatic binding of TrwD to the membrane, the concomitant demand of Ca2+ at millimolar concentrations (i.e., 1 order of magnitude above the lipid concentration) suggests, instead, that the lipid is electrically neutralized by Ca2+ so that the relative weight of any electrostatic component in protein binding must be small. Rather, a combination of divalent cation and negative divalent CL suggests the lateral separation of CL-Ca2+ complexes into separate domains in the plane of the membrane. CL has been shown to increase the ATPase activity in TrwD (35) and induce conformational changes (detected through changes in intrinsic fluorescence) in closely related members of the TrwD family (22).
In-plane formation of lipid domains is expected for the CL-Ca2+ system (27) but not for bilayers based on PG, which was less active than CL in supporting TrwD-induced vesicle aggregation. Interdomain interfaces are known to facilitate insertion into membranes, as shown for gramicidin A (13), E. coli
-hemolysin (3), or protein kinase C (17). Thus, formation of separate domains can also favor the interaction of TrwD with the lipid bilayer.
Yeo et al. (44) have elucidated the crystal structure of hexameric HP0525 from Helicobacter pylori, which is another member of the VirB11 family and is related to TrwD. The predicted secondary structure of TrwD for the N-terminal domain (Fig. 7) is the same as the calculated structure for HP0525 (44). It is thus reasonable to assume that the two proteins have the same overall folding pattern in this region, including membrane binding through the N-terminal domain. Electron microscopic studies reveal that they both display the same low-resolution quaternary structure (22). The molecular surface of HP0525 exhibits few hydrophobic regions, which are concentrated at the bottom of the hexamer, corresponding to
-helices A and B and to the loops connecting the latter with ß-strands 3 and 4. Helices A and B are conserved in TrwD (Fig. 7). Helix A is amphipathic in both proteins. Helix B, however, is almost fully hydrophobic in TrwD while it is amphipathic in HP0525. These data and predictions lead us to postulate that TrwD interacts with the membrane bilayer, through the stretches designated helices A and B in Fig. 7, at the N-terminal domain of the protein.
![]() View larger version (33K): [in a new window] |
FIG. 7. Alignment of the amino acid sequences of proteins HP0525 (accession no. E64585) and TrwD (accession no. CAA57032). To construct this alignment, a set of 20 proteins were selected among the closest TrwD homologs, excluding nearly identical sequences, with BLAST scores of better than 10-20. This set included HP0525 (P = 3 x 10-29). The alignment was done by using the ClustalW algorithm (2), and the two relevant sequences were extracted from the alignment. Above the alignment is the allocation of the secondary-structure elements of HP0525 according to its three-dimensional structure (43). Below the alignment is the secondary-structure prediction for TrwD, which was calculated from the multiple alignment described above by the PHD program (36). -Helices and ß-sheets are shown where PHD gave reliabilities of >82%. Amino acids invariant between the two proteins are in bold.
|
Other water-soluble proteins are known that induce profound modifications in membrane lipid organization without becoming strongly bound to the bilayer. Glyceraldehyde-3-phosphate dehydrogenase, a soluble protein containing hydrophobic patches on the molecular surface, has been reported to destabilize and fuse SUV under certain conditions (26). A variety of amphipathic peptides act in a similar way (5, 9, 23, 30). The ability of TrwD to interact with lipid bilayers in the presence of millimolar concentrations of calcium ions resembles the properties of annexins (7, 11), although there is no similarity in the conserved residues of the two protein families (our unpublished observations).
The above-described experiments with model membranes do not actually demonstrate that TrwD causes membrane aggregation and/or fusion as part of its normal function but rather point to its general capacity to bind and perturb cell membranes under a variety of conditions. TrwD is the first known protein that is essential for conjugation and perturbs the membrane structure. In the light of the above results, we propose that TrwD interacts with the membranous systems to build up the transport assemblage that facilitates DNA transfer. Namely, the hollow interior of the hexamer might be the receptacle for a chaperone-like activity related to the folding, or membrane delivery, of one or more of the components that form the DNA transport conduit. The other properties of TrwD, i.e., ATPase activity, possible interaction with other macromolecules, and membership in a large protein family, also locate this protein at a pivotal position in the bacterial conjugation and macromolecular transfer phenomena.
This work was supported with funds from DGICYT (grants PB98-1106 to F.C. and PB96-0171 to F.M.G.), the Basque Government (grants EX-98/28 and PI98/32 to F.M.G.), and the University of the Basque Country (grant G03/98 to F.M.G.). C.M. and S.R. were predoctoral students supported by the Basque Government.
|
|
|---|
-haemolysin in phospholipid bilayers. Biophys. J. 71:1869-1876.[Medline]
This article has been cited by other articles:
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Copyright © 2009 by the American Society for Microbiology. For an alternate route to Journals.ASM.org, visit: http://intl-journals.asm.org | More Info»