Molekulare Mikrobiologie, Institut für Mikrobiologie, Martin-Luther-Universität Halle-Wittenberg, 06099 Halle, Germany,1 Department of Soil, Water, and Environmental Science, University of Arizona, Tucson, Arizona 857312
Received 23 January 2003/ Accepted 21 April 2003
| ABSTRACT |
|---|
|
|
|---|
| INTRODUCTION |
|---|
|
|
|---|
The cus determinant consists of two operons, cusRS (previously ylcA-ybcZ) and cusCFBA (previously ylcBCD-ybdE), transcribed in opposite directions. The cusRS operon encodes a histidine kinase, CusS, and a response regulator, CusR. Transcription initiation of cusCFBA is dependent on the concentration of copper and silver (17, 41). The promoter region of cusCFBA harbors a motif with sequence homology to the DNA binding motif of CopR from Pseudomonas syringae, previously described as a cop box (40). Additionally, if the plasmid-encoded copper resistance determinant pco is present, expression of pcoE is also regulated by cusRS (10, 41).
The cusCFBA operon encodes proteins required for efflux of copper. CusA is a member of the resistance-nodulation-division (RND) protein superfamily (TC 2.A.6.1.1 in Milton Saier's functional-phylogenetic classification system for transmembrane solute transporters), which is a protein family of membrane-bound, proton-driven transporters (56, 57, 64). RND proteins, more than 1,000 amino acid residues in size, are composed of four large domains, two of them hydrophobic and two hydrophilic (18). The two hydrophilic domains are located in the periplasm and may contact the other subunits of the efflux protein complex.
CusB belongs to the family of membrane fusion proteins (MFP) (56), and CusC is an outer membrane factor (OMF) (14). Additionally, there is a small open reading frame, designated cusF, located between cusC and cusB. A similar open reading frame is also present in the sil determinant of Salmonella enterica serovar Typhimurium on plasmid pMG101 (23).
Deletion of cusA or cusCFBA led to the sensitivity of E. coli to silver (17, 24). Under anaerobic conditions, deletion of the cus system also resulted in copper sensitivity. However, under aerobic conditions only the additional deletion of cueO, encoding a multicopper oxidase, led to a copper-sensitive phenotype (22, 47). In this report we characterize the function of the different components of the CusCBA protein complex. Additionally, we identified several essential residues in the CusA protein and purified and characterized CusF, a novel copper-binding protein that interacts with the CusCBA efflux complex.
| MATERIALS AND METHODS |
|---|
|
|
|---|
cueO) and GR15 (
cueO
cusA::Cm) (22) are derivatives of wild-type strain W3110 (22). All other strains are listed in Table 1. E. coli strains were grown in Luria-Bertani (LB) broth (58). To study copper inhibition of growth, LB medium containing different concentrations of CuCl2 was routinely used. Additionally and to increase the differences between copper-sensitive and copper-resistant bacterial strains, LB medium was adjusted to pH 7.5 with NaOH, and CuSO4 was used instead of CuCl2. To induce cus gene expression from a plasmid tetAp promoter in both copper-containing media, anhydrotetracycline (200 µg/liter) was added. Antibiotics (ampicillin [125 mg/liter], chloramphenicol [15 to 25 µg/liter], and kanamycin [25 mg/liter]) were added where appropriate.
|
cueO) (22) by general P1 transduction to create E. coli strains EC952 (
cusF), EC933 (
cueO
cusF), EC950 (
cueO
cusB), and EC951 (
cueO
cusC), respectively. The codons for L20 to Y441 were deleted from the cusC gene, those for A19 to S379 were deleted from cusB, and those for K2 to S101 were deleted from cusF. By use of the same approach but with plasmid pKD4 (13), the tolC gene (deletion from M3 to T484) was replaced by a kanamycin resistance cassette, leading to strain ECA067 (
cueO
cusC
tolC::Kan). Topology analysis was performed as described previously (4) with the cusF gene cloned as a C-terminal 'phoA fusion. Construction of vectors for expression of CusA and CusF. To construct the CusA expression vector pECD738, the cusA gene was amplified by PCR from chromosomal DNA and cloned into pASK-IBA3 (IBA GmbH, Göttingen, Germany) by using the restriction sites EcoRI and PstI, introduced by PCR. Plasmid pECD738 expressed CusA as a C-terminal fusion protein with Strep-TagII (amino acid sequence SAWSHPNFEK). The cloned CusA possessed also eight additional residues at the N terminus (GDRGPEF). A similar approach was used to create the CusF expression vector plasmid pECD735.
Site-directed mutagenesis. The Quick-Change site-directed mutagenesis system (Stratagene, La Jolla, Calif.) was used to alter individual amino acid residues in CusA and CusF. The plasmids pECD735 (cusF) and pECD738 (cusA) that were used as template were isolated from a dam+ strain of E. coli. The primer pairs used to introduce the point mutation were antiparallel and overlapping. PCR products were treated with DpnI to digest the dam-methylated template plasmid. The purified PCR product containing the point mutation was directly transformed into E. coli. The correct mutations were verified by DNA sequence analysis.
Protein expression and purification. Proteins CusA and CusF were purified with Strep-TagII technology. For overexpression the recombinant plasmids pECD735 (CusF) and pECD738 (CusA) were always transformed freshly into E. coli strain BL21(pLYS) (Stratagene). Gene expression was induced by addition of anhydrotetracycline to a final concentration of 200 µg/liter of culture. CusF was purified from periplasmic extract (21). Alternatively, cells were suspended in buffer W (100 mM Tris-HCl, pH 8.0) containing DNase I (10 mg/liter), protease inhibitor phenylmethylsulfonyl fluoride (1 mM), and avidin (0.02 U) and lysed with a French press (1,260 lb/in2, cell type 20K; Amicon, SLM Instruments, Inc., Rochester, N.Y.). After centrifugation (23,400 x g, 15 min, 4°C) the supernatant was applied to a streptactin-agarose column (1 ml/400 ml of culture) equilibrated with the same buffer. The column was washed extensively with buffer W containing 1 M NaCl. The CusF protein was then eluted in aliquots of 1 ml of buffer E (buffer W containing 2.5 mM desthiobiotin). For purification of CusA, the same steps were used. However, CusA was solubilized from the membrane fraction of the cells with N-lauroylsarcosine (20 g/liter), and all buffers used to purify the solubilized protein contained N-lauroylsarcosine (1 g/liter). Polyclonal antibodies against both proteins were raised in rabbits.
Immunoblotting. Protein concentrations were determined by the Bradford method (9). To detect CusF, E. coli was grown in LB broth to 100 Klett units and incubated with different concentrations of CuCl2 for 30 min. Cells were harvested by centrifugation, and a periplasmic extract was prepared as described above. Protein samples were separated on sodium dodecyl sulfate (SDS)-polyacrylamide gels and blotted (SemiDry-Blot; Biometra, Göttingen, Germany) onto a polyvinylidene difluoride membrane as previously described (8). The membrane was subsequently incubated with the CusF-specific antibody (diluted 1:1,000) and a monoclonal anti-rabbit immunoglobulin G antibody conjugated with horseradish peroxidase (diluted 1:50,000; Sigma-Aldrich, Deisenhofen, Germany). For detection, the polyvinylidene difluoride membrane was incubated 1:1 with solution 1 (0.1 M Tris-HCl [pH 8.5], 0.4 mM p-coumaric acid, 2.5 mM Luminol) and solution 2 (0.1 mM Tris-HCl [pH 8.5], 5.4 M H2O2) for 1 min. The membrane was exposed for 5 s to 5 min to ECL Hyperfilm (Amersham Pharmacia Biotech, Uppsala, Sweden). Strep-TagII epitopes were detected with a streptavidin-alkaline phosphatase conjugate.
Analysis of copper binding. A CusF-containing solution (0.15 mM protein in 100 mM Tris-HCl buffer, pH 8.0) was incubated for 30 min at 0°C with 0.5 mM CuCl2. Unbound copper was removed by dialysis against 10 mM Tris-HCl buffer (pH 7.0). The protocol that was used for copper analysis was adapted from Environmental Protection Agency method 6020A. Up to 0.5 ml of the CusF sample (1 µM protein) was placed in a 5-ml Teflon digestion bomb, and 1 ml of concentrated trace-metal-grade nitric acid was added. The bomb was capped tightly and placed in water in a microwave-safe dish. The samples were heated for 5 min at 560 W and allowed to cool, and then the pressure was vented. The samples were heated an additional 5 min at 100% power, allowed to cool, quantitatively transferred to a volumetric flask, and brought to volume with Milli-Q water. The samples were finally analyzed by inductively coupled plasma-mass spectrometry with an external standard calibration curve. Terbium was added online as an internal standard. The UV-visible (UV-vis) spectrum of CusF in the absence or presence of copper was recorded on a Uvikon 922A spectrometer (Kontron Instruments, Zürich, Switzerland) at room temperature.
Assay of protein-protein interactions. The CytoTrap (Stratagene) yeast two-hybrid system was employed to study protein-protein interactions. The cusF gene was amplified without leader sequence by PCR and cloned into the bait vector pSOS with BamHI and SalI restriction sites introduced by PCR. The resulting plasmid expressed CusF (from amino acid 23) as an N-terminal fusion with hSOS. The genes encoding the soluble part of CusC (from amino acid 21) and CusB (from amino acid 29) were also amplified by PCR and cloned into the target vector pMYR with EcoRI and XhoI restriction sites. The resulting plasmids expressed these two proteins as N-terminal fusions with a myristylation signal targeting the fusion proteins to the cytoplasmic membrane. The plasmids were verified by DNA sequencing and transformed into Saccharomyces cerevisiae strain cdc25H (Stratagene). Interaction studies were carried out as described in the manufacturer's manual.
| RESULTS |
|---|
|
|
|---|
cueO
cusA::Cm) exhibits a copper-sensitive phenotype. A
cusA deletion did not differ in copper sensitivity from GR10 (
cueO
cusCFBA::Cm) with all cus structural genes deleted (21, 22). In order to investigate the influence of the other components of the Cus transport complex on copper resistance, cusC, cusF, or cusB was deleted (avoiding polar effects) in E. coli strain GR1 (
cueO), which led to strains EC951 (
cueO
cusC), EC933 (
cueO
cusF), and EC950 (
cueO
cusB), respectively. In all three mutant strains, unaltered expression of CusA was confirmed by immunoblotting (data not shown).
Single deletions of all four cus structural genes in strain GR1 (
cueO) led to a decrease in copper resistance (Table 1). Although the cusF deletion had the smallest effect on copper resistance, involvement of the product of this previously uncharacterized gene in copper resistance could be clearly demonstrated.
Deletion of cusB led to a complete loss of Cus-mediated copper tolerance (Table 1), comparable to the effect of the
cusA deletion. This demonstrated the essential function of the MFP CusB for copper resistance. A deletion of cusC, encoding a putative OMF, led to a strong decrease in copper resistance. The
cusC deletion strain was slightly more resistant to copper than was the
cusB or the
cusA deletion strain (Table 1). This small increase in copper resistance may be due to a complementation of the
cusC deletion by a gene for another OMF. To test if TolC might be this OMF, the tolC gene was replaced by a kanamycin resistance cassette. However, copper resistance of a
cueO
cusC
tolC::Kan triple mutant strain compared to that of the
cueO
cusC double mutant strain was unchanged, showing that TolC cannot partially substitute for a missing CusC protein (Table 1). Taken together, these data indicated that the three subunits of the putative CusCBA transenvelope efflux complex were all essential for cus-mediated copper resistance.
Conserved methionines of CusA are required for copper resistance.
Comparison of CusA with SilA (23) and other putative RND proteins revealed conserved methionine residues in the second periplasmic domain of CusA (M573, M623, M640, M672, and M812). These residues are not present in RND proteins involved in the export of divalent cations, such as CzcA (GenBank accession number P13511 [18, 45]) or CnrA (accession number G47056 [35]) from Ralstonia metallidurans strain CH34 or NccA from R. metallidurans strain 31A (accession number I39580 [59]). Each single methionine residue was mutated to isoleucine by site-directed mutagenesis. The mutant proteins were expressed in E. coli strain GR15 (
cueO
cusA::Cm). Correct expression of all mutated proteins was controlled by Western blot analysis (shown for some mutant proteins in Fig. 1; other data not shown). Copper resistance of this strain could be partially restored by expression of the CusA wild-type protein in trans, and the effect of the mutant proteins on copper resistance was compared to that of the wild-type protein (Table 1).
|
cueO
cusA::Cm) in trans (Table 1). Therefore, these methionine residues were essential for the function of CusA. Expression of CusA M640I in GR15 did not change the level of copper tolerance from that of cells expressing wild-type CusA (Table 1). Only a small difference in resistance between E. coli GR15 strains expressing CusA and those expressing CusA M812I could be detected on copper-containing solid medium (Table 1). In liquid medium, however, expression of M812I led to an intermediate level of copper resistance (data not shown). Although conserved, M640 and M812 appeared not to be essential for CusA function. Sequence comparison of the second periplasmic domain of CusA and SilA (data not shown) revealed four additional conserved methionines (M738, M755, M792, and M833). Single mutations of these four methionines to isoleucine had no or only a slight influence on copper resistance (Table 1). An amino acid sequence, M875XXM878XXM881, similar to a copper-binding motif described by Zhou and Thiele (67), was found adjacent to the second periplasmic domain (data not shown). A CusA triple mutant (M875I-M878I-M881I) did not differ much in its ability to confer copper resistance from the wild-type protein (Table 1). Thus, some methionine residues were not essential for CusA function although they are conserved and even located within putative copper-binding motifs. However, three methionine residues were indispensable for the function or structural integrity of CusA.
Two amino acid residues (D405 and E412) within or close to transmembrane helix IV of CusA are conserved in the family of metal-transporting RND proteins (64). These two charged amino acid residues were also essential for copper resistance mediated by Cus (Table 1). In RND proteins involved in the transport of monovalent cations, an alanine residue (A399) within this transmembrane helix is also conserved. RND proteins dealing with divalent heavy metal cations contain a D residue at this position (44). Alteration of A399 in CusA to D resulted in a clear effect on copper resistance (Table 1), showing that this amino acid residue was also essential for the function of the copper-transporting RND protein CusA.
CusF is a periplasmic protein. Involvement of CusF is a unique feature of cus-mediated copper detoxification. Sequence analysis of CusF predicted an N-terminal leader sequence and a potential signal peptidase cleavage site (data not shown), suggesting a periplasmic location of the CusF protein. A C-terminal fusion, CusF'-PhoA, was constructed to study the cellular location of CusF. The alkaline phosphatase activity of the CusF'-PhoA fusion was compared to that of the negative control, PhoA located in the cytoplasm, and to that of the positive control, PhoA in the periplasm. The CusF'-PhoA fusion showed a 30-fold-higher PhoA activity (160.1 ± 37.42 U/mg [dry weight] of cells) than did the negative control, a ß-lactamase-PhoA fusion without the ß-lactamase leader peptide (5.2 ± 0.76 U/mg [dry weight] of cells). The activity of the CusF'-PhoA fusion was even higher than that of the positive control, a ß-lactamase-PhoA fusion containing the ß-lactamase leader peptide (56.3 ± 1.78 U/mg [dry weight] of cells). These results confirmed a periplasmic location of CusF.
The CusF protein was overexpressed as a C-terminal Strep-TagII fusion and could be purified from the periplasmic extract of E. coli cells expressing this fusion protein (Fig. 2). The amino-terminal sequence of the purified protein was determined by Edman degradation as ANEHH, corresponding to the predicted sequence of CusF from A22. This indicates that CusF is processed by the leader peptidase after translocation into the periplasm.
|
cueO), but only after induction with CuCl2 (data not shown). The size of the detected protein was about 10 kDa. This value correlated well with the predicted size of the leaderless form of CusF. In contrast, CusF was not found in two independent cusF deletion strains, EC952 and EC933 (data not shown). These data clearly indicated that cusF is expressed in E. coli after induction with copper and its product is transported into the periplasm and processed into a mature protein after cleavage of the preprotein between positions 21 and 22. Interaction of CusF with the proteins of the CusCBA efflux complex. Besides CusF, most parts of the CusCBA efflux complex are predicted to be located in the periplasm. To investigate whether there is an interaction between CusF and the CusCBA complex, a yeast two-hybrid system was applied. In this system, two proteins that may interact are encoded by a bait and by a target vector, respectively. If these proteins interact, a stress response pathway in the yeast S. cerevisiae is successfully switched on and the cells are able to grow at 37°C.
The gene cusF was PCR amplified and cloned into the CytoTrap bait vector pSOS. The genes encoding CusC and CusB were also amplified and each cloned into the CytoTrap target vector pMYR. Since the experiment was done with proteins natively located in the periplasm, only the hydrophilic portions without the leader sequences (CusF' and CusC') or membrane anchor (CusB') were used. The resulting constructs plus controls provided by the manufacturer were transformed into the temperature-sensitive S. cerevisiae strain cdc25H, and growth on galactose-containing agar plates at 37°C was monitored. Yeast strains containing cusF' in the bait vector and cusB' or cusC' in the predator vector were able to grow at elevated temperature, as was the positive control provided by the manufacturer (Fig. 3). This indicated a possible interaction of CusF with CusB and of CusF with CusC.
|
|
cueO
cusF) with the mutated cusF gene (Table 1). Expression of the CusF mutant protein was confirmed by immunoblotting (data not shown). The
cusF phenotype of strain EC933 could be partially complemented in trans by the cusF wild-type gene but not by the M69I-M71I double mutant (Table 1). The CusF M69I-M71I protein was purified (data not shown), and copper binding was analyzed. The molar ratio between the CusF M69I-M71I polypeptide and bound copper was 0.225 ± 0.085. Since wild-type CusF bound about 1 copper atom per molecule, the MTM motif appears to be involved in binding of copper.
In copper chloride-containing LB medium, the difference among copper resistance of the control strain GR1 (MIC, 3.25 mM), GR1 with an additional
cusF deletion (MIC, 2.25 mM), and the same
cusF deletion strain complemented in trans by cusF (MIC, 2.75 mM) was rather small (Table 1). Therefore, the growth medium was optimized for a better differentiation between copper-sensitive and copper-resistant bacterial strains. In the resulting LB medium (pH 7.5) with copper sulfate instead of copper chloride, the MIC for the control strain GR1 dropped to 3.0 mM CuSO4. However, the MIC for the
cusF strain decreased to 1.25 mM CuSO4 and the MIC for the
cusF strain complemented in trans by cusF was 2.25 mM CuSO4 (Table 2). In this improved medium, the effect of mutations in CusF could be studied with enhanced resolution.
|
cusF deletion, emphasizing an essential function of the methionine residues. Both CusF variants with a single methionine-to-isoleucine mutation mediated slightly increased copper resistance (Table 2). All three mutant proteins appeared in the processed form in the periplasm as shown by Western analysis of periplasmic extracts; however, the expression level of the M69I-M71I double mutant protein and the M69I single mutant protein was below the expression level of the wild-type protein (Fig. 5). The expression level of the M71I single mutant protein was unaltered (Fig. 5). Thus, both methionine residues contributed to copper binding.
|
cusF mutation nearly as well as the wild-type CusF did (Table 2). When the remaining three histidine residues were also changed to glutamine residues, this triple mutant protein was also correctly exported into the periplasm (Fig. 5), and it mediated full complementation to copper resistance (Table 2). Thus, the five histidine residues of CusF are probably not essential for copper binding and/or CusF function. Mutation of two other conserved amino acid residues that may be involved in copper binding, D48 and F73, had also no effect (Table 2). | DISCUSSION |
|---|
|
|
|---|
The second copper-induced regulon is the cus determinant that was previously described as a copper and silver resistance system (17, 22, 24, 41). The cusRS genes form a sensor-regulator pair that activates the adjacent but divergently transcribed genes cusCFBA (41), encoding the subunits for a transport complex that traverses both membranes of the gram-negative bacterium. Since Ag(I) is also detoxified (17), the substrate for Cus is Cu(I) rather than Cu(II).
The central transport protein of the Cus protein complex, CusA, is a member of the RND protein superfamily of proton-driven cation symporters and antiporters (57, 64). The presence of CusA is essential for Cus function (22). The first three-dimensional structure of an RND protein, AcrB, shows an extensive periplasmic domain of the protein that is organized as a homotrimer (42). Three vestibules, thought to act as a conduit for substrates, connect these periplasmic domains to the periplasm (42). Thus, access of copper to the RND protein CusA may be possible from the cytoplasm as well as from the periplasm.
Further transenvelope transport of copper should be accomplished by the MFP CusB and the OMF CusC. Although CusC is related to the OMF TolC (33), the latter protein was not able to substitute for a missing CusC protein (Table 1), although cross-complementation of OMFs has been shown in many cases (2, 5, 20, 29, 33, 39, 55, 60, 65).
The organization of the genes for CBA efflux systems agrees with this hypothesis. All described resistance determinants containing a cusA-like gene are usually preceded by a cusB-like gene and are organized as an operon. In the heavy metal resistance determinants czc and cnr of R. metallidurans (35, 45), the sil determinant of S. enterica serovar Typhimurium (23), and cus of E. coli (17, 41), the gene for the outer membrane protein is also part of this operon. However, in other resistance systems of E. coli (acrAB and acrCD), the tolC gene encoding the OMF is located elsewhere on the chromosome (5). The cusBA-like operons on the chromosomes of R. metallidurans (contigs 619 and 709, Department of Energy Joint-Genome Institute) and of P. syringae (orfEF) are lacking the genes for the respective OMFs. These putative efflux pumps need to recruit an OMF from another resistance determinant, as has been shown elsewhere for acrAB and tolC (1).
In contrast to cusC, deletion of cusB led to a complete loss of copper resistance. The importance of the MFP CusB is reminiscent of previous data obtained from studies of the czc and cnr determinants of R. metallidurans. A deletion of czcB led to the nearly complete loss of resistance to cobalt, zinc, and cadmium (55), and a deletion of cnrB led to highly reduced nickel and cobalt resistance (20). As proposed by Andersen et al. (1), the function of MFP such as CusB may be that of an adaptor that brings the putative CusC3 tube close to the catalytic center CusA3. Thus, an RND protein might not be able to bind to an OMF in the absence of its specific MFP adaptor, and the data obtained with CusB fit into this picture.
In this emerging model for the function of a CBA efflux complex, the roles of the MFP adaptor and the OMF tube are more static than dynamic, with the RND protein being the catalytic center. Substrates coming from the periplasm and/or the cytoplasm require a substrate-binding site proximal to the central cavity of the RND protein, formed by the two large periplasmic loops (LPLs) of each monomer (42). Recent findings indicate that these LPLs of RND proteins indeed have a function in substrate recognition. When the LPLs of AcrD were exchanged with the corresponding LPLs from AcrB, the chimeric protein displayed the substrate specificity of AcrB rather than that of AcrD (15). Similar results were obtained with chimeric AcrB-MexB proteins (62), and essential amino acids probably involved in substrate recognition were identified in both LPLs of MexD (37). The LPLs of MexF were also required for correct assembly of this CBA efflux pump (38), assigning just a second essential function to the headpiece of RND proteins.
Sequence analysis of CusA showed no known potential copper-binding motif such as CXnC (46) in loops predicted to be located in the cytoplasm or in the two LPLs of this protein. However, the second periplasmic loop of CusA contains a large number of methionine residues that are conserved within a group of CusA-related proteins. Similar methionine-rich motifs were also identified in copper transport systems from Schizosaccharomyces pombe (67), but not in other RND proteins such as CzcA, CnrA, or NccA, which are described as transporters of divalent heavy metal cations (35, 45, 59). Site-directed mutagenesis of these conserved methionines in CusA showed that M573, M623, and M672 were absolutely necessary to confer copper resistance in E. coli and that M812 is also involved in this process. A mutation of the sequence motif M875VPM878TLM881, which is similar to the copper-binding motifs of Ctr1 and Ctr3 (S. cerevisiae) (12, 31, 49) and Ctr4 (S. pombe) (67), had no influence on copper resistance. Taken together, these data show that methionine residues in the LPLs of CusA may be part of a periplasmic copper binding site or necessary to stabilize the CusCBA efflux complex. This indicates similarity of function between the metal-transporting RND protein CusA and the related RND proteins (AcrB, AcrD, MexB, and MexF) involved in the transport of hydrophobic organic substrates.
The CusCBA protein complex may capture Cu(I) from the cytoplasm and export the cation across both membranes of E. coli, thereby preventing the appearance of Cu(I) in the periplasm. CzcA, the first member of the RND family, also transports divalent heavy metal cations across the cytoplasmic membrane (18, 55). Additionally or alternatively, the Cus protein complex may capture copper from the periplasm for direct export to the outside, as has been suggested elsewhere for RND proteins exporting organic substrates (66). Which access pathways to CusA are used?
Deletion of the structural gene region of the cus determinant or of the cusA gene had no effect on copper resistance in the E. coli wild type under aerobic conditions (22) but impaired silver resistance (17). Deletion of cueO in a
cusA single mutant strain diminishes copper resistance from the wild-type level to the most sensitive phenotype observed (22). A
cueO
cusA double deletion strain is as copper sensitive as the copA::Km
cueO
cusA triple deletion strain. Deletion of cusA in a copA::Km background has no further effect on copper tolerance (17, 22), probably because protection of the periplasm by CueO is sufficient to maintain copper resistance under aerobic conditions. Although these data do not exclude transenvelope efflux of Cu(I) by Cus, they favor detoxification of copper from the periplasm, as has already been discussed (22, 47). Interestingly, the Cus system contains CusF, a periplasmic protein that is absent in CzcCBA and related protein metal detoxification systems.
The cusF gene is the second gene of the cusCFBA operon and encodes a protein with a predicted size of 110 amino acids and a potential leader sequence (M1 to Q21). The leader sequence was cleaved off after amino acid Q21, and the mature protein was located in the periplasm. In vitro, purified CusF bound one copper per polypeptide, leading to a complex with a pink color corresponding to an absorption maximum of 510 nm in the UV-vis spectrum. Other proteins with a similar color have a binuclear copper center, composed of two copper atoms connected by the sulfhydryl groups of two cysteines. Each of these coppers is also connected to a histidine residue (7, 26, 32). Recently, another purple periplasmic copper-binding protein has been described (28). PcoC is part of a plasmid-borne copper resistance determinant of E. coli (10, 34). Like CusF, PcoC does not contain cysteine residues. At least one ligand of the copper center of PcoC is predicted to be a histidine residue. Participation of a methionine residue in copper binding to PcoC has been discussed elsewhere (28). Since CusF does not contain cysteine residues, CusF might likewise bind copper via histidine and methionine residues. While the five histidines of CusF were not required for full CusF function, two conserved methionines were essential and may be part of a copper site, MXM (67).
Deletion of cusF led to a partial loss of copper tolerance. CusF might have an auxiliary function improving the efficiency of the CusCBA system. CusF could act as a periplasmic copper chaperone shuttling copper to the CusCBA efflux complex and thereby increasing the accessibility of periplasmic copper. This function is reminiscent of periplasmic substrate binding proteins that shuttle their substrates to the MerT transporter or ABC uptake systems (25, 27, 30, 36, 43, 48, 51, 52). Another small periplasmic copper-binding protein, the CopC protein from P. syringae, binds Cu(I) and Cu(II) to different sites, and redox change of the bound copper ion causes its migration from one site of CopC to the other (6). CusF may also bind both Cu(I) and Cu(II) and deliver Cu(I) directly to CusCBA. Maybe, Cu(II) can be transferred to CusCBA only after reduction to Cu(I). These attributes of CusF; the existence of a possible metal binding site in CusA located in the periplasm; and the copper resistance phenotypes of copA, cueO, and cus mutants add to the initial evidence (22) that CBA transport systems may also detoxify periplasmic metal cations by directly exporting cations from the periplasm across the outer membrane. This would be a novel mechanism of metal resistance. Future work will show if this hypothesis can be validated.
| ACKNOWLEDGMENTS |
|---|
We acknowledge Michael Kopplin for performing the analyses. The generation of antibodies to CusF was performed by the Institute of Physiological Chemistry of the Martin Luther University Halle-Wittenberg. We acknowledge Beate Fricke for antibody generation. Preliminary genomic sequence data for R. metallidurans were obtained from the DOE Joint-Genome Institute (JGI) at http://www.jgi.doe.gov/tempweb/JGI_microbial/html/index.html.
| FOOTNOTES |
|---|
| REFERENCES |
|---|
|
|
|---|
This article has been cited by other articles: