Previous Article | Next Article ![]()
Journal of Bacteriology, July 2003, p. 4110-4118, Vol. 185, No. 14
0021-9193/03/$08.00+0 DOI: 10.1128/JB.185.14.4110-4118.2003
Copyright © 2003, American Society for Microbiology. All Rights Reserved.
Department of Biophysics and Biophysical Chemistry, Johns Hopkins University School of Medicine, Baltimore, Maryland 21205,1 Department of Biology and McCollum-Pratt Institute, Johns Hopkins University, Baltimore, Maryland 212182
Received 4 February 2003/ Accepted 28 April 2003
|
|
|---|
|
|
|---|
![]() View larger version (31K): [in a new window] |
FIG. 1. Alignment of the sequences of characterized Nudix CoAses. Conserved residues are shown as white letters in black boxes. Conservative substitutions are shown with grey letters in open boxes. Stars indicate residues of the UPF0035 (NuCoA) motif; triangles indicate residues of the Nudix motif. GenBank GI numbers for sequences are as follows: DR1184, D. radiodurans, gi 15806203; Nudt7_H, human, gi 1848966; Nudt7_M, mouse, gi 12746409; Pcdlp, yeast, gi 6323180.
|
D. radiodurans is an organism that can withstand gamma-radiation fluxes 200-fold greater than those withstood by Escherichia coli and is also highly resistant to UV radiation and to desiccation (38). It has recently been proposed that an unusual DNA topology makes DNA repair more efficient in this organism, thus contributing to its resistance (23). Another source of this remarkable resistance to stress may be the presence in the genome of D. radiodurans of an uncommonly large number (21) of Nudix hydrolases, contributing to the elimination of deleterious compounds (4). The product of gene Dr1184 of D. radiodurans (hereafter referred to as DR-CoAse), a Nudix hydrolase, contains the NuCoA motif (Fig. 1) and was shown to hydrolyze CoA (39). In this paper we report the structure of DR-CoAse, alone and in complex with Mg2+, its activating cation. These structures, the first of a Nudix CoAse, are a major step toward understanding the mechanism and the specificity of CoA pyrophosphatases.
|
|
|---|
The induced cells were harvested, washed by suspension, resuspended in 25 ml of buffer A (50 mM Tris [pH 7.5], 1 mM EDTA), sonicated, and centrifuged, and the precipitate was discarded. The protein concentration of the supernatant was adjusted to 10 mg/ml with buffer A (fraction I). A typical preparation yielded approximately 300 mg of total protein from 3 g of cells.
Nucleic acids were precipitated by addition of 1/10 volume of 10% streptomycin sulfate, and after 15 min on ice, the precipitate was removed by centrifugation. The supernatant was collected, ammonium sulfate was added to 30% saturation, the sample was centrifuged, and the supernatant was brought to 45% saturation of ammonium sulfate. The precipitate was dissolved in 10 ml of buffer A and dialyzed overnight against 2 liters of buffer B (50 mM Tris [pH 7.5], 1 mM EDTA, 300 mM NaCl). The solution was then loaded at 0.5 ml/min onto a HiPrep 26/60 Sephacryl S-200 high-resolution gel filtration column preequilibrated with buffer B at 4°C. After this step the protein was at least 85% pure. The eluted fractions, dialyzed against 2 liters of buffer A, were loaded onto a mono-Q anion exchange column and eluted using a continuous NaCl gradient (0 to 0.5 M) in the same buffer at a rate of 1 ml/min, collecting 2-ml fractions. Protein concentrations were determined by absorbance at 280 nm. The purified DR-CoAse was stable for months at -80°C.
Crystallization of the DR-CoAse. DR-CoAse, at a concentration of 7 mg/ml in buffer A, was crystallized at 20°C in hanging drops using a precipitant solution consisting of 27% PEG 1500-100 mM sodium citrate (pH 6.0). In 1 month, overlapped plate-shaped crystals appeared in the drop. After 3 months, these crystals grew to a size of 0.5 by 0.5 by 0.02 mm. For data collection, the multiple crystal conglomerate was broken into several single crystals. Crystals were cryoprotected in a solution containing 30% PEG 1500, 100 mM sodium citrate (pH 6.0), and 20% glycerol and flash frozen at 100 K.
Structure determination. Native data were collected to a 2.09 Å resolution at beamline X25 of the National Synchrotron Light Source, Brookhaven National Laboratory. Diffraction data were processed with HKL_2000 (30). Consideration of systematically absent reflections revealed that the crystals belong to space group P21212 with the following unit-cell parameters: a = 40.6 Å, b = 94.0 Å, c = 43.7 Å. These cell dimensions and space group symmetry are compatible with one DR-CoAse molecule in the asymmetric unit. Molecular replacement trials with Amore (26) and Molrep (34, 35) using either MutT (37) (Protein Data Bank accession code 1TUM) or the dimeric ADP-ribose pyrophosphatase from E. coli (EC-ADPRase) (15) (Protein Data Bank accession code 1GQ9) were unsuccessful. Thus, structure determination was carried out using heavy atom derivatives.
Three derivatives were prepared by soaking preformed crystals under the conditions shown in Table 1. After the heavy atom sites were determined by visual inspection of difference Patterson maps, phases calculated to 3.5 Å resolution with the program SOLVE (32) had an overall figure of merit of 0.47 (20 to 3.5 Å; 0.35 in the last resolution shell) using all the data and including anomalous differences for the gadolinium derivative. Phases were improved by solvent flattening, histogram matching, and multiresolution modification using the program DM (11). An electron density map calculated with these phases was used to trace the chain using the program O (19, 20) (residues 1 to 22, 33 to 56, and 63 to 190). Refinement was performed using CNS v1.1 (7) with a residual target. Rebuilding and correction of the model was guided by
A-weighted 2Fo-Fc electron density maps. R and R-free (calculated with randomly selected 10% of the reflections) were used to monitor refinement of the model (6). The structure of the Mg2+ complex was refined in a similar manner using data to a 1.7 Å resolution. Residue 4, not visible in the native structure, had clear electron density in this complex and was built and refined.
|
View this table: [in a new window] |
TABLE 1. Statistics for data collection and refinement
|
Coordinates. Coordinates of the structures have been deposited in the Protein Data Bank (accession codes 1NQY and 1NQZ).
|
|
|---|
-helices (
1 to
6) and 11 ß-strands (ß0 to ß10). Its core is similar to the Nudix fold observed in other members of the Nudix family: a mixed ß-sheet formed by four ß-strands with two
-helices, one on each side (15) (Fig. 2A). In DR-CoAse this core is formed by strands ß1, ß4, ß5, and ß6 and helices
2 and
6. Strands ß2, ß3, and ß7 form another antiparallel ß-sheet that is also present in all Nudix enzymes of known structure (see below). As in other Nudix enzymes, the Nudix motif of DR-CoAse (residues 71 to 92) folds as a loop-helix-loop structure (helix
2 in DR-CoAse). Gly-71, the first residue of the motif, is the last residue of strand ß4. Before the Nudix fold, DR-CoAse has an
-helix (
1) and a ß-strand (ß0). Helix
1 partially occupies the site that is used for substrate binding in other Nudix enzymes.
![]() View larger version (33K): [in a new window] |
FIG. 2. Structure of the DR-CoAse. (A) Schematic representation of the three-dimensional structure of DR-CoAse. The regions corresponding to the Nudix fold are magenta, those of NuCoA are turquoise (side chains in dark blue), and the rest of the structure is emerald green. The side chains of the Nudix motif are shown in orange. (B) Secondary structure diagram of the DR-CoAse. Strands are shown as arrows, helices are shown as cylinders, and connecting regions are shown as black lines. Dashed lines show regions that were not built in the structure. The beginning and the end of each element are shown.
|
Two antiparallel ß-strands, ß8 and ß9, are inserted into the Nudix C-terminal region. This C-terminal extension is not present in other Nudix hydrolases (see below).
Metal binding site. All Nudix enzymes require a divalent cation, such as Mg2+ or Mn2+, for activity (4). To identify the metal binding site(s) of DR-CoAse, we determined the structure of the enzyme in the presence of 50 mM Mg2+. After inclusion of the Mg2+ ion identified in a difference electron density map, the structure refined against the DR-CoAse/Mg2+ data (1.7 Å resolution) to an R value of 21.6% (R-free = 25.8%) with excellent geometry (Table 1). The cation is coordinated by five water molecules and the side chain carboxylate of Glu-86 (Fig. 3). The Mg2+-O distances vary between 2.1 and 2.4 Å. The position of this ion is similar to that of the central ion of the three-Mg2+ (or Mn2+) cluster found in the structure of the EC-ADPRase (16). The presence of this ion binding site establishes that the catalytic site of the DR-CoAse is formed by the same residues of the Nudix motif as those of other Nudix enzymes.
![]() View larger version (90K): [in a new window] |
FIG. 3. Electron density of the coordination of the Mg2+ ion. The Mg2+ ion has a near-perfect octahedral coordination formed by five water molecules and the side chain of Glu 86 of the Nudix motif. Other side chains surrounding the position of the ion are also shown.
|
-helices. We call the secondary structure elements of this fold Nu-ß1, Nu-ß2, Nu-
1, Nu-ß3, Nu-ß4, and Nu-
2, independent of the numbers they are assigned in the individual structures. An additional antiparallel ß-sheet formed by three short strands (Nu-ß'1, Nu-ß'2, and Nu-ß'3) is also present in all the structures, but its length, geometry, and position are highly variable (Fig. 4). Helix Nu-
1 and the loops preceding and following it contain the Nudix motif in all the enzymes. MutT, the simplest Nudix enzyme, is about 130 residues long and is essentially just a Nudix fold with connecting loops (Fig. 4B) (37). EC-ADPRase has, in addition to the Nudix fold, a 54-residue N-terminal extension formed by three antiparallel ß-strands (Fig. 4C) (15) that is involved in the formation of the dimer by domain swapping. The N-terminal extension of each monomer makes contact with the substrate bound to the other monomer and is a major contributor to the specificity of the enzyme. Ap4A hydrolase (Fig. 4D) (31) contains all the secondary structure elements of the Nudix fold, plus an additional
-helix that connects strands Nu-ß3 and Nu-ß4 (equivalent to strands ß5 and ß6 of DR-CoAse). This helix, which is away from the binding site in the free enzyme, moves to close over the substrate and provides additional contacts during the catalytic cycle (31).
![]() View larger version (45K): [in a new window] |
FIG. 4. Comparison of the Nudix hydrolases of known structure. (A) Sequence comparison based on the alignment of the three-dimensional structure of the four enzymes. No attempt was made to align the sequences of the regions not structurally conserved (black letters). Secondary structure elements are indicated: helices with thick lines, strands with arrows. Elements common to all four enzymes are shown in red. Elements characteristic of individual enzymes are shown in blue. Bold characters show the helices. (B, C, D, and E) Schematic representation of the four known structures of Nudix hydrolases. The Nudix fold (magenta), including the additional three-stranded sheet (pink), is highlighted in all the structures. (B) MutT. This enzyme consists of only these elements. (C) EC-ADPRase. Additional portions of the structure, including the N-terminal extension involved in dimer formation by domain swapping, are shown in turquoise. (D) Ap4Ase. Additional regions, including the -helical insertion, are shown in orange. (E) DR-CoAse. Additional regions, including the N-terminal and the C-terminal extensions, are shown in green.
|
-helix (
1) and one ß-strand (ß0) (Fig. 4E) (15). Helix
-1 overlaps the position occupied by the ADPR in EC-ADPRase and by AMPCPP in E. coli MutT. CoA recognition. Alignment of the structures of EC-ADPRase,MutT, and Ap4A in complex with their substrates shows that the position of the diphosphate with respect to the helix of the Nudix motif is highly conserved. Alignment of the structures of the EC-ADPRase and the DR-CoAse shows that the divalent cation site observed in DR-CoAse is in a position similar to that occupied by one of the Mg2+ ions of the EC-ADPRase (15, 16). These two observations make it possible to model the position of the diphosphate of CoA in the binding site of the DR-CoAse.
In CoA, the diphosphate has substituents at both phosphates: an adenosine-3'-phosphate moiety and an N-mercaptoethyl-pantothenylamide (Fig. 5A). With the diphosphate in the predicted position, it is clear that there is no room in the binding site to accommodate both of these groups. The culprit is helix
1, which overlaps the volume at one side of the diphosphate. This volume is used by the other Nudix enzymes to bind one side of the substrate. In the case of DR-CoAse, the substrate, CoA, has groups of significant size on both sides of the diphosphate (Fig. 5A). It is therefore reasonable to assume that helix
1 has to move away from its position in the apo enzyme for the substrate to bind. Movement of helix
1 would free the second side of the binding site for CoA binding.
![]() View larger version (55K): [in a new window] |
FIG. 5. Binding of CoA to DR-CoAse. (A) Chemical structure of CoA. (B) Schematic representation of the portions of the DR-CoAse structure that interact with CoA. (C) Surface representation of the binding site. Positive regions are in blue; negative regions are in red. (In panels B and C, helix 1 was omitted.).
|
Based on these considerations, it seems likely that the adenosine-3'-P moiety of CoA binds to the DR-CoAse in the position occupied by AMPCPP in MutT. Placing the adenosyl moiety in this position orients the pantothenate and the mercaptoethanolamine in the direction of the strands that contain the NuCoA motif. With CoA in the resulting orientation, it is possible to find a conformation and a position for this half of the substrate that result in specific contacts with residues of the NuCoA motif (Fig. 5B and C). In this model, the diphosphate makes a hydrogen bond with the side chain of Arg-55 and with the carbonyl oxygen of Gly-70. It makes also a close contact with the C
of Gly-71. The phosphate at the 3' position of the ribose makes an H-bond with the side chain oxygen of Ser-72. The carbonyl of the pantothenyl moiety forms an H-bond with the main chain NH of Gln-65. Additional close contacts are made by other portions of the substrate. The interactions of adenine and the ribose in the model are similar to those found in MutT and Ap4A. One interesting feature of this model is that the substrate has an L-shaped conformation that conforms to the 90° bend of the second and third strands of the NuCoA motif fostering contacts between the pantothenyl-mercaptoethylamine moiety and the NuCoA motif. Additional contacts may be formed between the substrate bound in this position and the new position of helix
1. In this binding arrangement, a hydrophobic surface in the binding site of the free enzyme is covered by helix
1. This makes it possible for the enzyme to provide a hydrophobic surface for interaction with the extensive hydrophobic portions of the substrate without having this surface exposed to solvent in the free enzyme. This characteristic provides a mechanism for increasing the specificity of the DR-CoAse: only substrates that can make these hydrophobic interactions are able to displace the helix and become hydrolyzed by the enzyme.
The need to move helix
-1 to bind the substrate would also explain the failure of CoA or parts of this molecule to bind to the DR-CoAse crystals. Extensive attempts involving diffusion into preformed crystals and cocrystallizations failed to yield crystals of the complexes.
Summary and conclusions. The structure of the DR-CoAse presented here is the first of a Nudix enzyme with CoAse activity. DR-CoAse shares the basic fold of the other Nudix enzymes of known structure. In addition to the Nudix motif, DR-CoAse has two inserted sequences: an N-terminal helix followed by a strand and a C-terminal, long hairpin formed by two strands. The NuCoA motif, characteristic of CoA-hydrolyzing Nudix enzymes, folds as a two-stranded hairpin followed by a 90° turn of the second strand at a conserved proline residue.
Alignment of the structure of DR-CoAse with that of other Nudix hydrolases shows that helix
-1 occupies part of the site required for substrate binding. Thus, substrate binding must involve movement of this helix. With helix
1 out of the way, a model for binding of CoA can be proposed in which the substrate interacts with the NuCoA motif characteristic of Nudix CoAses.
|
|
|---|
This article has been cited by other articles:
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Copyright © 2009 by the American Society for Microbiology. For an alternate route to Journals.ASM.org, visit: http://intl-journals.asm.org | More Info»