Previous Article | Next Article ![]()
Journal of Bacteriology, August 2003, p. 4548-4557, Vol. 185, No. 15
0021-9193/03/$08.00+0 DOI: 10.1128/JB.185.15.4548-4557.2003
Copyright © 2003, American Society for Microbiology. All Rights Reserved.
Department of Molecular Microbiology and Biotechnology, Tel-Aviv University, Ramat Aviv,1 Department of Biological Chemistry, The Weizmann Institute of Science, Rehovot,2 Department of Food Engineering and Biotechnology and Institute of Catalysis Science and Technology, Technion-Israel Institute of Technology, Haifa, Israel3
Received 24 March 2003/ Accepted 2 May 2003
|
|
|---|
|
|
|---|
The multienzyme cellulosome complex is a major mechanism by which some cellulolytic bacteria efficiently degrade cellulose and related plant cell wall polysaccharides (2, 4, 5, 8, 9, 18, 20, 32, 58, 59). To date, cellulosomes have been found in several strains of anaerobic bacteria and fungi obtained from very different types of ecosystems. The first cellulosome was discovered in studies on the anaerobic thermophile Clostridium thermocellum (3, 36, 37). The cellulosome system of this organism consists of a variety of different enzymes bound to a noncatalytic scaffoldin subunit, which can, in turn, bind to one of several cell surface anchoring proteins. In this organism, both the attachment of the enzymes to the scaffoldin and the attachment of the scaffoldin to the anchoring proteins are accomplished by a special kind of protein-protein interaction, the cohesin-dockerin interaction. In this context, the enzyme subunits include a dockerin domain, and the scaffoldin contains multiple copies of cohesin modules for collective incorporation into the complex. The scaffoldin subunit itself harbors a single dockerin variant that interacts selectively with corresponding cohesin variants on the anchoring proteins. In C. thermocellum, the primary scaffoldin is trifunctional in that it also contains (in addition to the cohesins and dockerin) a substrate-targeting cellulose-binding domain (CBD). The anchoring proteins are bifunctional; in addition to the cohesins, they have another type of domain, the S-layer homology domain (SLH), which is known to bind strongly to the cell surface (12, 40). Thus, the sequential cohesin-dockerin-mediated set of interactions among the enzymes, scaffoldin, and anchoring protein results in cell surface attachment of the cellulosome and amplification of the number of enzymes in the higher-order complex.
In other cellulosome-producing organisms, the supramolecular organization of the complex and its putative association with the cell surface are less clear. For example, in various mesophilic clostridia, the multicohesin, CBD-containing scaffoldins lack a dockerin (30, 51, 56, 60), and the exact mode of association with the cell surface is not known. Anchoring proteins for these organisms have not been identified. On the other hand, the two known scaffoldins of Ruminococcus flavefaciens lack both a defined CBD and an SLH module, and the molecular mechanism(s) for their interactions with either the cellulose substrate or the cell surface has not been substantiated (17, 52).
As the number of new cellulosomal components increases for different bacterial systems, the diversity of the molecular architecture and the resulting implications for cellulosome assembly become more striking. The cellulosome-producing, anaerobic mesophile Acetivibrio cellulolyticus, for example, is known both for its efficient degradation of crystalline cellulose and for its particularly elaborate cell surface ultrastructure (13, 31, 34, 35, 57). A novel scaffoldin (CipV) of this bacterium has recently been described and sequenced (15). Similar to the CipA scaffoldin of C. thermocellum (23), the A. cellulolyticus CipV scaffoldin contains multiple (seven) cohesin domains, an internally located CBD, and a C-terminal dockerin domain. Unlike all other scaffoldin genes discovered previously, however, cipV is the only gene that has been shown to encode a glycoside hydrolase sequence as an integral part of the deduced polypeptide chain. The analogy between the C-terminal dockerin of the A. cellulolyticus scaffoldin and the C-terminal dockerin of C. thermocellum indicated that there may be cohesin-containing anchoring proteins that are perhaps linked to the cell surface via resident SLH modules. Since a number of C. thermocellum genes that code for anchoring proteins are clustered immediately downstream of the CipA gene on the genome (22), we decided to continue sequencing the A. cellulolyticus genome in a similar manner.
|
|
|---|
Isolation of genomic DNA and construction of genomic libraries. Genomic DNA was isolated by using the protocol of Murray and Thompson (48). A. cellulolyticus genomic libraries were constructed by using a Lambda ZAP II undigested vector kit for an XbaI library and a Uni-ZAP XR vector kit for an EcoRI-XhoI library. Both kits were obtained from Stratagene Cloning Systems (La Jolla, Calif.).
PCR and subcloning. PCRs were performed with a Master Personal device (Eppendorf, Hamburg, Germany) at various annealing temperatures (50 to 60°C). The resulting PCR fragments were cloned by using pGEM-T Vector System 1 (Promega Corporation, Madison, Wis.). Alternatively, pUC19 was used for cloning the PCR fragments or phage inserts following digestion with appropriate restriction enzymes. Escherichia coli TG1 or XL-1 cells were used as host cells for transformation. DNA samples were purified by using either a QIAquick PCR purification kit (QIAGEN Inc., Valencia, Calif.) or an agarose gel DNA extraction kit (Roche Diagnostics Corporation, Indianapolis, Ind.). Plasmids were purified by using a High Purification plasmid isolation kit (Boehringer, Mannheim, Germany).
Southern blotting. A. cellulolyticus genomic DNA was digested with various restriction enzymes, including EcoRI, SacI, XbaI, and XhoI, and the DNA fragments were separated on a 1% agarose gel. Relevant DNA fragments were labeled by using a random primed DNA labeling kit (Roche Diagnostics) as instructed by the supplier. Southern blotting was performed by using the protocol described in the DIG Application Manual for Filter Hybridization (Roche Molecular Biochemicals).
Library screening. Two A. cellulolyticus genomic libraries were screened. The PCR-based library screening method was used for screening of the XbaI library by the procedure described by Israel (29). The primers used for screening were PAC-F1 and PAC-R1, which resulted in a 737-bp PCR product (Table 1). One of the positive plaques was verified by PCR and transferred to a phagemid, which resulted in a 4-kb insert that was subsequently sequenced. For EcoRI-XhoI library screening, a 450-bp PCR fragment obtained with primers ACAnF15 and ACAnR13 (Table 1) was labeled and used as a probe. A positive plaque was identified and transferred to the phagemid, and the resulting 6-kb insert was sequenced.
|
View this table: [in a new window] |
TABLE 1. Primers used in this study
|
Cloning and overexpression of recombinant proteins. The appropriate genes were subcloned into expression vectors by PCR (Fig. 1). The PCR products were cloned into either the pET14b, pET28a, or pET9d vector, and their intact sequences were verified by DNA sequencing. The clones were expressed at 37 or 16°C either in E. coli BL21(DE3) or in BL21(DE3)pLysS (Stratagene) grown in the presence of 0.1 mM isopropyl-ß-D-thiogalactopyranoside (IPTG). Following growth, the cultures were lysed by sonication as described by Ding et al. (17). The expressed proteins were identified by sodium dodecyl sulfate (SDS)-10 or 12% polyacrylamide gel electrophoresis (PAGE) and stained with Coomassie brilliant blue.
![]() View larger version (12K): [in a new window] |
FIG. 1. Scheme showing the positions on the genome and the domain organization of the scaB and scaC genes of A. cellulolyticus. The two genes are located in tandem immediately downstream of scaA (cipV). scaB and scaC both contain multiple copies of cohesin domains (numbered). scaB harbors a typical dockerin domain at its C terminus. The first two cohesins of scaB and all three scaC cohesins are closely attached, with short or no identifiable linker sequences. In contrast, the linker segments that connect the other modules in scaB are relatively long. The scaC linker sequence that connects cohesin 3 to the SLH module is particularly long and is characterized by an 18-residue repeated sequence. ORF, open reading frame.
|
Immunoblotting. Proteins were subjected to SDS-10% PAGE, and the separated proteins were then transferred onto a nitrocellulose membrane and rinsed with washing buffer (50 mM Tris-HCl [pH 7.5], 150 mM NaCl, 25 mM CaCl2). The membranes were then incubated for 2 to 3 h with blocking buffer (3% bovine serum albumin in washing buffer) and rinsed five times with washing buffer. The membranes were then incubated overnight at 4°C with the recombinant His-tagged or biotinylated proteins. The membranes were then treated with either peroxidase-conjugated antibody (anti-His [C-terminal]-horseradish peroxidase mouse antibody) or a streptavidin-horseradish peroxidase detection system used according to the supplier's instructions (Invitrogen Corporation, Carlsbad, Calif.). Bands were visualized by using a chemiluminescent substrate (Supersignal substrate for Western blotting; Pierce Biotechnology, Rockford, Ill.) as recommended by the manufacturer.
Peptide sequencing. Selected protein bands were excised from SDS-PAGE gels and subjected to proteolysis with Lys-C, and the resultant peptides were resolved by reverse-phase high-performance liquid chromatography, analyzed, and sequenced by Edman degradation (Protein Center, Technion, Haifa, Israel). Alternatively, the bands were treated with trypsin, and the tryptic peptides were identified by matrix-assisted laser desorption ionization mass spectrometry at the Maiman Institute for Proteome Research at Tel Aviv University, Tel Aviv, Israel. The peptide sequence data obtained were compared to the sequences of known genes.
Protein sequence analysis. Potential signal sequences were determined with the SignalP V2.0 program (49). The parameters for molecular weight, theoretical pI, amino acid composition, and extinction coefficient were computed by using the ProtParam tool (http://www.expasy.org/tools/protparam.html), available at the SWISS-PROT website (1). Multiple-sequence alignment and phylogenetic trees were generated by using the ClustalW program (http://www2.ebi.ac.uk/clustalw/). The SWISS-PROT accession numbers for the C. thermocellum SLH-bearing anchoring proteins OlpA, OlpB, and Orf2p are Q06848, Q06852 and Q06853, respectively. Dockerin and cohesin sequences were obtained from the GenBank website (http://www.ncbi.nlm.nih.gov/) or from the Carbohydrate- Active Enzymes server (CAZy website [http://afmb.cnrs-mrs.fr/~pedro/CAZY/db.html]), which was designed by Coutinho and Henrissat (10, 14). The ScaB and ScaC cohesins were mapped on a background of cohesin modules, as previously described (15, 16). The ScaB and GH9 dockerins were similarly mapped on a background of dockerins as described previously (52). Secondary structures of the Thr-rich linker sequences were predicted by using the PredictProtein server at Columbia University (http://cubic.bioc.columbia.edu/predictprotein/).
Nucleotide sequence accession numbers. The nucleotide sequences of the scaB and scaC genes have been deposited in the GenBank database under accession numbers AY221112 and AY221113.
|
|
|---|
Description of the genes downstream of cipV (scaA). The status and modular architecture of scaB and the portion of scaC sequenced are shown in Fig. 1. The scaB gene codes for a 942-residue protein that contains a signal peptide, four cohesin modules, and a C-terminal dockerin domain. The most likely cleavage site of the signal peptide is between residues 27 and 28 (INA-AP). Based on the deduced ScaB sequence, the mature protein (following cleavage of the signal peptide) has a theoretical molecular weight of 97,323 and a calculated pI of 4.84 for the unfolded protein. It is currently not known whether the protein is glycosylated in the native state. Phylogenetic analysis revealed that the four ScaB cohesins can be classified as type II cohesins and are thus most similar to those of the C. thermocellum anchoring proteins and of the Bacteroides cellulosolvens scaffoldin CipBc (Fig. 2A). Little if any linker segment is present between the first two cohesins. In contrast, relatively long Pro-Thr-rich linker sequences separate cohesin 2 from cohesin 3 and cohesin 3 from cohesin 4 (39 amino acid residues each). An even longer Pro-Thr-Ala-rich linker (84 residues) separates cohesin 4 from the dockerin domain. The latter linker is remarkable in that every second residue is a threonine, and the hierarchical frequency of the alternating residues is Ala > Pro > Thr = Gln > Lys (these residues appear 20, 15, 3, and 3 times and only once, respectively, and there is no detectable pattern). Secondary structure analysis (53-55) revealed that unlike the ß strands predicted to characterize the long R. flavefaciens cellulosomal linker segments (52), the linker segments of the A. cellulolyticus ScaB protein are predicted to generally lack helices and ß strands, but they are expected to assume a loop-like structure. The reliability indices for the predicted loop regions are, however, comparatively low.
![]() View larger version (52K): [in a new window] |
FIG. 2. Relationship of the A. cellulolyticus cohesins and dockerins to previously described domains. (A) Phylogenetic analysis of the ScaB and ScaC cohesins relative to the known type I, II, and III cohesins. All four ScaB cohesins map together on a separate branch of the type II cohesins. The ScaC cohesins form a new group, which emanates from the central branch and is distinct from the other cohesin types. Scale bar = 0.1% amino acid substitutions. (B) Phylogenetic analysis of the dockerins of ScaB and the GH9B enzyme. Scaffoldin-based dockerins are indicated by squares.(C) Sequence alignment of the ScaB and the GH9B dockerin domains and their relationships to selected type I dockerins from various cellulosomal scaffoldin and enzyme subunits. Presumed calcium-binding residues are indicated by a blue background, and proposed recognition residues are indicated by a yellow background. With the exception of the domains derived from the proteins described in this paper, the sources of sequences used are described in references 15, 16, and 52. Abbreviations: Acece, A. cellulolyticus; Bacce, B. cellulosolvens; Cloce, C. cellulolyticus; Clocl, C. cellulovorans; Clotm, C. thermocellum; Rumfl, R. flavefaciens.
|
![]() View larger version (49K): [in a new window] |
FIG. 3. Multiple-sequence alignment of the SLH module of A. cellulolyticus ScaC (Acece-ScaC) and the three C. thermocellum anchoring proteins (Clotm-OlpA, Clotm-OlpB, and Clotm-Orf2p). The degrees of conservation are indicated as follows: asterisks indicate that all sequences are identical, colons indicate that the residues are conserved, and dots indicate that residues are semiconserved, as defined by the EBI server (http://www2.ebi.ac.uk/clustalw/).
|
550 amino acid residues, including 27 repeats of the 18-residue stretch PTPTQSAXPTVTPSATAT, where X is mainly Met (15 copies), with substitutions of Lys (eight copies), Thr (two copies), and Ile (two copies) in no particular order; additional substitutions were also interspersed intermittently at different positions within the 18-residue stretch at lower frequencies. Following the repeated sequence, the linker continues downstream with a
70-residue Pro-Thr-rich segment that differs in character from the 18-residue repeat. Like the prediction for the linker segments of A. cellulolyticus ScaB, secondary structure prediction for the long ScaC linker indicated that there is a general lack of
helices and ß strands. Description of the known A. cellulolyticus dockerin sequences. In the context of the present work, the sequences of three different dockerin domains from A. cellulolyticus were available. These included the previously described CipV (ScaA) dockerin, the ScaB dockerin sequenced in this work, and an enzyme-borne dockerin. In the latter case, a partial sequence of an enzyme was detected in this study. The family 9 enzyme (termed GH9B to distinguish it from the resident GH9A of the CipV polypeptide) was sequenced (Xu, unpublished results) and was found to contain a C-terminal dock-erin domain. The latter dockerin sequence was thus the first representative enzyme-borne cellulosomal dockerin sequence from this organism and consequently complemented the sequences of the two scaffoldins used in this investigation.
Phylogenetic analysis of the three A. cellulolyticus dockerins was carried out with reference to the >100 dockerin domains that have been sequenced to date. The results are shown in Fig. 2B, which shows representative examples of enzyme- and scaffoldin-borne dockerins. The dockerin of CipV (ScaA) is most similar to the C. thermocellum scaffoldin-borne (CipA) dockerin, which is recognized by a type II cohesin. In contrast, the dockerins of A. cellulolyticus ScaB and the GH9B enzyme map on a separate branch of the tree, together with those of the B. cellulosolvens CipBc scaffoldin and the R. flavefaciens CesA enzyme.
The F-hand variation (43, 50) of the EF-hand calcium-binding motif (11, 28) is largely retained in the three A. cellulolyticus dockerins, although there are some deviations. As described previously, the sequence of the A. cellulolyticus CipV (ScaA) dockerin is unusual in that a four-residue insert is present in the first duplicated calcium-binding motif (Fig. 2C). The ScaB dockerin is unusual in terms of another feature: one of the normally conserved residues in the duplicated calcium-binding loop (usually Asn, Asp, or Thr) in each duplicated segment is replaced by a positively charged amino acid (Arg or Lys). It is not clear whether such digressions from the canonical EF-hand calcium-binding motif could interfere with the binding affinity for the ligand. On the other hand, the GH9B enzyme-borne dockerin contains all the essential calcium-binding residues and other requisite features of a conventional dockerin domain (Fig. 2C). It is also interesting that the putative recognition residues of the three A. cellulolyticus dockerins (i.e., LE/LE of ScaA, IN/IN of ScaB, and SI/SL of the GH9B enzyme) are different from each other and from those of all of the other known enzyme- or scaffoldin-borne dockerins derived from the different cellulosome-producing species (44, 46, 50, 52).
Cohesin-dockerin interactions among the A. cellulolyticus proteins. In order to gain further insight into the interactions among the individual types of protein modules encoded by the genes of the cluster, various gene segments were subcloned and overexpressed. Representative cohesin modules were expressed in pET28a together with a fused C-terminal His tag for subsequent isolation and detection. The dockerin domains were C terminally fused to Geobacillus stearothermophilus xylanase T6 (45) as an appropriate carrier protein. Fusion to this protein ensured enhanced expression, folding, and stability of the attached dockerin domain (A. Mechaly, Y. Barak, T. Handelsman, R. Lamed, Y. Shoham, and E. A. Bayer, unpublished results). The xylanase-dockerin fusion protein also represents an approach for standardization of the dockerin-containing probe. The resultant fusion proteins also included an N-terminal His tag to facilitate subsequent isolation. The expressed proteins used in this study are listed in Table 2. They include the fifth cohesin of CipV (CohA5), the first cohesin of ScaB (CohB1), and the third cohesin of ScaC (CohC3), as well as the two hybrid proteins containing either the dockerin of ScaB (DocB) or the dockerin of the GH9B cellulase fused to the xylanase carrier. For comparative purposes, CohC3 was also expressed without a His tag in pET14b; the purified construct was biotinylated and used as a complementary probe to verify the affinity-based labeling system. The binding specificities of the expressed cohesin probes were investigated by affinity blotting with cell-derived extracts and with the xylanase-dockerin fusion proteins.
|
View this table: [in a new window] |
TABLE 2. Expressed proteins prepared in this study
|
![]() View larger version (78K): [in a new window] |
FIG. 4. Affinity blotting of cell-derived proteins, performed with representative recombinant cohesins from ScaA, ScaB, and ScaC as the probes. A. cellulolyticus cells were grown on cellobiose and separated by centrifugation into supernatant (Sup) and pellet (Cell) fractions. The supernatant fraction was further fractionated by adsorption onto amorphous (phosphoric acid-treated) cellulose prior to subsequent electrophoresis. Samples (cell-associated pellet or cellulose-adsorbed supernatant) were subjected to SDS-PAGE (Gel) and were blotted onto nitrocellulose membranes (Blots). Gels were stained with Coomassie brilliant blue. The blots were probed with different recombinant protein samples, and labeled bands were detected by chemiluminescence by using peroxidase-conjugated, anti-His tag antibody. The probes were CohA5 (the fifth cohesin of ScaA), CohB1 (the first cohesin of ScaB), and CohC3 (the third cohesin of ScaC). Lane Std contained prestained protein molecular weight markers.
|
![]() View larger version (107K): [in a new window] |
FIG. 5. Affinity blotting of selected dockerin-containing fusion proteins performed with recombinant cohesins from ScaA and ScaC. Dockerins from ScaB and the cellulosomal GH9B enzyme were fused to G. stearothermophilus xylanase T6, and the resultant fusion proteins (Xyn-DocB and Xyn-DocGH9, respectively) were expressed in an appropriate E. coli host cell system. The fusion proteins were subjected to SDS-PAGE (Gel), transferred to nitrocellulose membranes (Blots), and probed with the ScaA and ScaC cohesins (CohA5 and CohC3, respectively), as described in the legend to Fig. 4. Lane Std contained prestained protein molecular weight markers.
|
240-kDa ScaA band in the supernatant fraction (Fig. 4). This band was identified definitively as ScaA by peptide sequencing of proteolytic digests, as described previously (15). No labeling was observed in the cell-associated fraction. However, it should be noted that the cells were grown on cellobiose, not cellulose, and were harvested in the stationary phase of growth. Attempts to prepare a viable xylanase hybrid protein comprising the ScaA dockerin were not successful, perhaps due to the unusual nature (four-residue insert) of the calcium-binding motif of the first duplicated segment. Consequently, at this stage in our studies, confirmation of the labeling specificity by using an artificial dockerin-containing construct could not be demonstrated. The A. cellulolyticus ScaC cohesins bind selectively to the ScaB dockerin. In the cell-associated fraction (Fig. 4), the ScaC cohesin 3 probe (CohC3) labeled three bands having molecular masses of 170, 130, and 100 kDa. The exact identities of the three labeled bands are unclear. The size of the 100-kDa band is consistent with the calculated molecular mass of the ScaB polypeptide. However, the relatively long Thr-rich linker segments could serve as oligosaccharide attachment sites that could result in a higher-molecular-mass glycoprotein, as shown previously for scaffoldins of both C. thermocellum and B. cellulosolvens (24-27). Alternatively, there may be an additional (other than ScaB) dockerin-containing protein(s) that could interact with the ScaC cohesin. In any case, the CohC3 probe appeared to selectively label the ScaB dockerin (Fig. 5), since the corresponding Xyn-DocB construct was heavily labeled with this probe compared to the Xyn-DocGH9 construct, which was essentially not labeled by CohC3.
In the supernatant fraction, the CohC3 probe labeled predominantly a 170-kDa band (Fig. 4), perhaps equivalent to the 170-kDa band of the cell-associated fraction. In addition, a minor band at about 100 kDa was very slightly labeled.
|
|
|---|
This approach was accomplished at least partially first with the cellulosome system of C. thermocellum (7) and later with the cellulosome system of R. flavefaciens (17, 52). In the former case, a series of cohesin-containing anchoring proteins (OlpB, Orf2p, and SdbA) were described, which interacted selectively with the C-terminal dockerin of the C. thermocellum CipA scaffoldin (38-40). The anchoring proteins of this bacterium contained a C-terminal SLH module that was used to incorporate the polypeptide into the cell surface. The relevant cohesin-dockerin interactions could thus effect successive binding of the scaffoldin and, in turn, the appropriate enzymes into a higher-order, cell-surface-associated cellulosome system.
The R. flavefaciens system represents another variation on the cellulosome theme, in which the enzyme-based dockerins reflect at least two distinct cohesin-binding specificities. The cellulosome is characterized by two known scaffoldins, ScaA and ScaB. The three ScaA cohesins are used to incorporate some but not all of the dockerin-containing enzymes into the complex, and the C-terminal ScaA dockerin can interact with all seven ScaB cohesins (17, 52). An X domain of unknown function has been suggested to play a role in cell surface attachment, but this suggestion has yet to be experimentally verified. The experimental evidence also suggests that there may be at least one additional type of R. flavefaciens scaffoldin. In any case, elucidation of the modular interactions among the components of each new cellulosome system provides new insight into the diverse supramolecular organization.
The results of the present work demonstrate that in the A. cellulolyticus cellulosome system, both of the genes downstream of cipV contain segments that encode for cohesin domains. The existence of multiple cohesins implies that like cipV, the new genes encode additional scaffoldins. Consequently, cipV was renamed scaA, and its neighboring genes were designated scaB and scaC. It is clear that these three genes constitute an emerging cluster of cellulosome-related genes. The presence of a cluster of multiple scaffoldin-like genes on the chromosome reflects the genomic status previously described for C. thermocellum and R. flavefaciens rather than the genomic status of the scaffoldin-enzyme gene cluster in Clostridium cellulolyticum and cognate bacteria. In its capacity in integration of the dockerin-containing enzymes, ScaA (CipV) can be considered a primary scaffoldin. In contrast, ScaB essentially plays the role of an adaptor protein, which mediates between ScaA (and its attached enzymes) and ScaC. A. cellulolyticus ScaB is the first example of such an adaptor protein. ScaC, on the other hand, clearly plays the role of an anchoring scaffoldin by virtue of its C-terminal SLH module.
Surprisingly, perhaps, the order of the genes in the A. cellulolyticus cluster reflects the recognition properties of the cohesins and dockerins. Thus, the ScaA dockerin binds to the cohesins of ScaB and the ScaB dockerin binds to the cohesins of ScaC (Fig. 6). However, additional, unidentified scaffoldins (e.g., the 170-kDa protein) may also be components of alternative higher-order cellulosome complexes in this bacterium.
![]() View larger version (30K): [in a new window] |
FIG. 6. Schematic representation of the proposed cell surface disposition of the A. cellulolyticus cellulosomal components identified. The GH9B enzyme and other putative dockerin-containing enzymes are incorporated into the ScaA scaffoldin by virtue of their interaction with the ScaA cohesins. ScaB plays the role of an adaptor protein that mediates between the dockerin of the primary scaffoldin, ScaA, and the cohesins of the anchoring scaffoldin, ScaC. The entire complex appears to be cell associated via the resident SLH module of ScaC.
|
The role of amplified enzyme incorporation into a cellulosome presumably reflects the recently described proximity effect of the cellulosome (21), which is one of the key factors for efficient digestion of recalcitrant forms of cellulose. Concentration of complementary cellulolytic enzymes on the surface of the substrate and in the vicinity of the bacterial cell surface should thus enhance the synergistic action of the enzymes.
|
|
|---|
This article has been cited by other articles:
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Copyright © 2009 by the American Society for Microbiology. For an alternate route to Journals.ASM.org, visit: http://intl-journals.asm.org | More Info»