Previous Article | Next Article ![]()
Journal of Bacteriology, August 2003, p. 4578-4584, Vol. 185, No. 15
0021-9193/03/$08.00+0 DOI: 10.1128/JB.185.15.4578-4584.2003
Copyright © 2003, American Society for Microbiology. All Rights Reserved.
Department of Microbiology and Immunology, University of Maryland School of Medicine, Baltimore, Maryland 21201
Received 14 March 2003/ Accepted 7 May 2003
|
|
|---|
|
|
|---|
In bacteria, the majority of proteins that are translocated across membranes are synthesized as preprotein with an amino-terminal extension known as the signal or leader peptide. The signal peptide is involved in targeting preproteins for translocation via the Sec system (25). The Sec machinery consists of multiple proteins and provides a channel for translocation of newly synthesized preproteins from the cytosol across the cytoplasmic membrane in bacteria (13). The homotetramer SecB, a chaperone protein, interacts with the newly synthesized preprotein in the cytoplasm and targets the preproteins to the SecAYEG-translocase at the membrane interface. Finally, type I signal peptidase, a membrane-bound endopeptidase presumably located in proximity to SecYEG, cleaves the leader peptide from the preprotein, which results in the release of the mature protein from the membrane (22). It has been demonstrated that inhibition of bacterial type I signal peptidase leads to the accumulation of preproteins and eventual cell death (11, 14, 20, 21). Due to its essential role in bacterial cell growth and relative accessibility of its active site on the outer leaflet of the cytoplasmic membrane, type I signal peptidases have been considered as a potential target for the development of novel antibacterial agents (24).
New opportunities arising from the recent publication of the genome sequences of R. prowazekii (2), R. conorii (23), and R. sibirica (GenBank accession number AABW01000001) now enable us to select and characterize rickettsial genes of interest. Our interest is in characterizing the genes involved in protein secretion pathways of rickettsiae in order to assess their potential roles in the invasion, growth, and pathogenesis of these obligate intracellular bacteria. In this communication, we report the cloning and sequence analysis of the putative lepB gene that encodes type I signal peptidase from R. rickettsii and R. typhi. In addition, we provide the first detailed molecular and functional characterization of the lepB gene of R. rickettsii and R. typhi.
|
|
|---|
Genomic DNA extraction. Vero cells (African green monkey kidney cells, ATCC number CRL-1573) were cultured in Dulbecco's modified Eagle medium (DMEM) with 4.5 g of glucose per liter with glutamine (Biofluids, Inc., Rockville, Md.) supplemented with 10% fetal bovine serum (Gemini, Calabasas, Calif.). R. rickettsii and R. typhi were propagated in Vero cells as previously described (15, 26). Rickettsiae were partially purified from rickettsiae-infected (>90%) Vero cells as follows. Infected cells were harvested and mechanically ruptured by forcing them through a 27-gauge needle attached to a 10-ml syringe to release the intracellular bacteria. To enrich for rickettsiae, large cell fragments and intact host cells were removed by low-speed centrifugation (275 x g for 10 min). The supernatants were centrifuged at 14,000 x g for 20 min at 4°C to pellet the partially purified rickettsiae. Genomic DNA of R. rickettsii and R. typhi was extracted by using the Wizard genomic DNA purification kit (Promega, Madison, Wis.).
Cloning of the R. rickettsii and R. typhi lepB operon. The R. rickettsii lepB operon was amplified by PCR in two different fragments. The primers used in PCRs are shown in Table 1. The primers AZ971 (forward) and AZ974 (reverse) were used to amplify the lepB gene of R. rickettsii (first fragment). For 100 µl of PCR, 200 ng of R. rickettsii genomic DNA was used. Thermal cycling conditions consisted of initial denaturation at 94°C for 2 min followed by 30 cycles at 94°C for 1 min, 45°C for 1 min, and 72°C for 3 min, and a final extension step at 72°C for 10 min was performed by using Pfu DNA polymerase (Stratagene, La Jolla, Calif.). The PCR product (1,640 bp) was purified by Strataprep PCR purification kit (Stratagene). The purified PCR product was cloned into pPCR-Script Amp SK(+) vector (Stratagene) and was transformed into Escherichia coli TOP10 cells (Invitrogen Life Technologies, Carlsbad, Calif.). The cloned lepB region of R. rickettsii was sequenced by the dye termination method by using a model 373 automated fluorescent sequencing system (Applied Biosystems, Foster City, Calif.). The second fragment containing the upstream region of the lepB gene was PCR amplified from R. rickettsii DNA by using the forward primer AZ1501 and the reverse primer AZ1375. PCR amplification, cloning, and sequencing of the second fragment (2,978 bp) were performed by following the same conditions as mentioned for the first fragment. The sequences of both fragments of the R. rickettsii lepB region were combined and aligned by using MacVector 6.5.3 software (Genetics Computer Group, Inc., Madison, Wis.).
|
View this table: [in a new window] |
TABLE 1. Primers used in PCR reactions
|
The sequence of the lepB operon and deduced amino acid sequence of R. rickettsii and R. typhi were analyzed with MacVector 6.5.3 software. Sequence comparisons to those available in GenBank were performed using BLAST analysis (http://www.ncbi.nlm.nih.gov).
Isolation of RNA and RT-PCR. R. rickettsii and R. typhi were purified from Vero cells (>90% infection) as described above. Total RNA from the partially purified rickettsiae was isolated by the use of Trizol reagent (Invitrogen Life Technologies) and treated with RQ1 RNase-free DNase (Promega) by following manufacturers' recommendations. Reverse transcription-PCR (RT-PCR) was performed with 300 ng of total RNA in 50-µl reaction volumes by using SuperScript One-Step RT-PCR with Platinum Taq (Invitrogen Life Technologies). The thermal cycling conditions consisted of one cycle of 45°C for 30 min and 94°C for 2 min, followed by 35 cycles of 94°C for 30 s, 48°C for 30 s, 72°C for 2 min, and a final extension step of 72°C for 10 min.
Northern analysis.
The total RNA (6 µg) from R. rickettsii was subjected to Northern analysis by using the NorthernMax kit (Ambion, Austin, Tex.). The [
-32P]dATP (Amersham Pharmacia Biotech, Piscataway, N.J.)-labeled 297-bp probe specific to the lepB coding sequence corresponding to primers AZ1372 and AZ1534 was prepared by use of the Strip-EZ PCR probe synthesis kit (Ambion). The hybridized membrane (positively charged nylon) was exposed to Kodak Biomax MS film for autoradiography.
Complementation and expression analysis of the rickettsial lepB gene. The lepB gene of R. rickettsii or R. typhi was cloned into the SacI and EcoRI sites of pPCR-Script Amp SK(+) vector (Stratagene) under a lac promoter by incorporation of the restriction sites into the primers used to amplify the insert sequences. The primers AZ1055 (EcoRI) and AZ1056 (SacI) were used for the cloning of the 1,588-bp fragment of the R. typhi lepB gene to generate the pRTlepB23 plasmid. For the R. rickettsii lepB gene, the 1,592-bp fragment was amplified by AZ1262 (EcoRI) and AZ1263 (SacI) primers in order to clone and generate the pRRlepB569 plasmid. The constructed plasmids pRRlepB569 and pRTlepB23 were checked by sequencing. For the complementation assay, plasmids were transformed into E. coli strain IT41 cells and selected on a Luria broth (LB)-ampicillin (100 µg ml-1) plate incubated at 30°C for 48 h. For controls, plasmid pUC18 or pESL4 [carrying a 2,229-bp fragment of the groESL gene of R. typhi into pPCR-Script Amp SK(+) vector; reference 26] was also transfected into E. coli strain IT41 cells. For the complementation assay by growth curve, the transformed cells were grown in an LB-ampicillin mixture overnight at 30°C. The cultures were diluted 100-fold into a fresh LB-ampicillin mixture and incubated with shaking at nonpermissive temperature of 42°C. The optical density at 600 nm was recorded at 30-min intervals. For the complementation assay by CFU assay, the transformed cells were grown to mid-log phase in LB-ampicillin mixture at 30°C and plated onto two sets of LB-ampicillin plates. One set of plates was incubated at 30°C and the other at 42°C. The colonies were counted after 48 h of incubation to determine the percentage of growth at 42°C with respect to 30°C. All experiments were performed at least three times and the standard deviation was calculated (shown as ±) by using Microsoft Excel software.
To analyze the synthesis of rickettsial signal peptidase I in E. coli strain IT41, the lepB open reading frame (ORF) of R. rickettsii was amplified by primers AZ1514 (BamHI) and AZ1515 (EcoRI) and cloned into the pTrcHisC vector (Invitrogen Life Technologies) at the BamHI and EcoRI sites. The constructed plasmid pTrcHisRR4 that contained the 804-bp ORF of lepB from R. rickettsii was confirmed by sequencing. The constructed plasmids pTrcHisRR4 and vector pTrcHisC were transfected into E. coli strain IT41 cells as mentioned above.
The transformed cells were grown to mid-log phase in LB-ampicillin (100 µg/ml) medium at 30°C and then induced for protein expression by the addition of 1 mM isopropyl-ß-D-thiogalactopyranoside (IPTG). Cells were harvested at 4 h postinduction and resuspended in (1/10 vol) 1x phosphate-buffered saline. Cell suspensions were mixed with equal volumes of 2x Tris-glycine-sodium dodecyl sulfate (SDS) sample buffer (Invitrogen Life Technologies) and boiled at 100°C for 5 min. Total cell proteins were separated on 4 to 12% Tris-glycine precast gel (Invitrogen Life Technologies) by using 1x Tris-glycine-SDS running buffer (Bio-Rad, Hercules, Calif.). The proteins were transferred to a polyvinylidene difluoride membrane (Invitrogen Life Technologies). The membrane was blotted with His-Tag monoclonal antibody (Novex, Madison, Wis.) by using the WesternBreeze chromogenic immunodetection system (Invitrogen Life Technologies).
Nucleotide sequence accession numbers. The GenBank accession numbers for the lepB operons reported in this communication are AY134668 for R. rickettsii and AF503336 for R. typhi.
|
|
|---|
![]() View larger version (68K): [in a new window] |
FIG. 1. Alignment of amino acid sequences deduced from the putative lepB gene of R. rickettsii (Rr, this work), R. typhi (Rt, this work), R. conorii (Rc, accession number AE008582), R. prowazekii (Rp, accession number AJ235270), R. sibirica (Rs, accession number AABW01000001), and the signal peptidase I of E. coli (Ec, accession number BAA10915). Number of amino acids (a.a. #) is mentioned after the sequence of each species. The molecular weight (MW) and isoelectric point (pI) were computed by using the prediction server available at http://us.expasy.org/cgi-bin/pi_tool.html. The transmembrane domains shown in green were predicted by the HMMTOP program available at http://www.enzim.hu/hmmtop/index.html. The conserved amino acids regions (boxes B through E) are shown in boldface (black, blue, and red). Overall identity with R. rickettsii (Rr) signal peptidase I was calculated with MacVector 6.5.3 software.
|
![]() View larger version (79K): [in a new window] |
FIG. 2. Transcription analysis of the R. rickettsii and R. typhi lepB genes. Ethidium bromide-stained 1% agarose gel in 1x TAE (Tris-acetate-EDTA) buffer. Total RNAs isolated from R. rickettsii or R. typhi cultured in Vero cells were used for RT-PCR. Lanes 1 and 2 represent PCR and RT-PCR analysis, respectively, on the total RNA isolated from R. typhi (performed by using forward primer AZ1039 and reverse primer AZ1040 specific to the lepB coding region). Lanes 3 and 4 represent RT-PCR and PCR analysis on the total RNA isolated from R. rickettsii (performed by using forward primer AZ1287 and reverse primer AZ1286 specific to the lepB coding region). The control lanes 1 and 4 demonstrate the absence of DNA in the RNA samples. GeneRuler 100-bp DNA ladder plus (MBI-Fermentas, Hanover, Md.) was used as a DNA size marker (lane M).
|
![]() View larger version (39K): [in a new window] |
FIG. 3. Northern blot analysis of total RNA isolated from R. rickettsii cells cultured in Vero cells. Total RNA (6 µg) was separated on a 1% agarose gel and transferred to a positively charged nylon membrane. The membrane was hybridized with a radiolabeled 297-bp probe specific to R. rickettsii lepB. Relative size of the hybridized bands was determined by using a 0.24- to 9.5-kb RNA ladder (Invitrogen-Life Technologies).
|
![]() View larger version (118K): [in a new window] |
FIG. 4. Schematic map and RT-PCR analyses of clustered secF-nuoF-lepB-rnc' genes for R. rickettsii. (A) Schematic map and scale of the secF-nuoF-lepB-rnc' gene cluster of 3,930 bp for R. rickettsii illustrates three putative ORFs of secF (encoding protein export membrane protein; nucleotide position, 290 to 1,216; green), nuoF (encoding NADH dehydrogenase I chain F; nucleotide position, 1,381 to 2,646; blue), lepB (encoding type I signal peptidase; nucleotide position, 2,830 to 3,630; red) and partial sequence of rnc' (encoding RNase III; partial 5' sequence, 3,630 to 3,930; gray). Primers used in RT-PCR analysis are shown by forward and reverse arrows. (B) RT-PCR analyses of the total RNA isolated from R. rickettsii cells cultured in Vero cells. Ethidium bromide-stained 1% agarose gel in 1x TAE (Tris-acetate-EDTA) buffer is shown. RT-PCR products are shown: lane 1, 372 bp using forward primer AZ1372 (lepB) and reverse primer AZ1374 (lepB); lane 2, 1,509 bp using forward primer AZ1529 (nuoF) and reverse primer AZ1375 (lepB); lane 3, 1,475 bp using forward primer AZ1533 (secF) and reverse primer AZ1535 (nuoF); lane 4, 1,894 bp using forward primer AZ1533 (secF) and reverse primer AZ1375 (lepB); lane 5, 1,292 bp using forward primer AZ1528 (secF) and reverse primer AZ1531 (nuoF); lane 6,732 bp using forward primer AZ1556 (165 nucleotides upstream from secF start codon) and AZ1568 (secF); and lane 7, 967 bp using forward primer AZ1372 (lepB) and reverse primer AZ1566 (rnc'). The control PCR using the same primer sets (used for RT-PCR analysis) on the total RNA of R. rickettsii produced no detectable product (data not shown), indicating no DNA contamination in the total RNA used in this analysis. The specificity of each primer pair (used for RT-PCR) to amplify the target sequence was checked (data not shown) by PCR on template DNA. GeneRuler 100-bp DNA ladder plus (MBI-Fermentas) was used as a DNA size marker (lanes M).
|
The E. coli strain IT41 was transfected with pRRlepB569 and pRTlepB23 and with the control plasmids pESL4 and pUC18. The temperature-sensitive growth was assayed as described in Materials and Methods. It is clearly observed from the growth curves shown in Fig. 5 that the E. coli strain IT41 carrying the plasmid pRRlepB569 (carrying the 1,592-bp fragment of the R. rickettsii lepB gene) or pRTlepB23 (carrying the 1,588-bp fragment of the R. typhi lepB gene) grew much faster than the E. coli strain IT41 with or without control plasmids pESL4 and pUC18 at the nonpermissive temperature of 42°C, thereby indicating functional complementation of the lepB gene from R. rickettsii or R. typhi in E. coli strain IT41. For quantitative comparison of the growth at the nonpermissive temperature of the transformed E. coli strain IT41, survival was also determined by CFU assay. Survival as measured by CFU of E. coli strain IT41 at 42°C was 0.081 ± 0.017% of that grown at 30°C. The control plasmids pESL4 and pUC18 were unable to improve the growth of the strain IT41 at 42°C. However, the temperature-sensitive E. coli strain IT41 carrying the plasmid pRRlepB569 or pRTlepB23 showed a substantial increase in the growth at 42°C by 73.37 ± 22.64% or 78.68 ± 12.82% (compared to that at 30°C), respectively, indicating the functional expression of the lepB gene from R. rickettsii or R. typhi in E. coli.
![]() View larger version (31K): [in a new window] |
FIG. 5. Growth curves showing the complementation in E. coli strain IT41 transfected with appropriate plasmids (as mentioned in Materials and Methods). Cultures pregrown at 30°C were diluted 100-fold into LB-ampicillin broth (IT41 cells without plasmid were grown in absence of ampicillin) and incubated with shaking at 42°C. The growth of cells in culture was monitored by optical density (OD) at 600 nm.
|
![]() View larger version (45K): [in a new window] |
FIG. 6. Western blot analysis of the expression of the R. rickettsii signal peptidase I in E. coli strain IT41. Total proteins from the E. coli cells carrying pTrcHisRR4 or pTrcHisC plasmids, separated on 4 to 12% Tris-glycine precast gel, 1x Tris-glycine-SDS running buffer, transferred to polyvinylidene difluoride membrane was probed with His-Tag monoclonal antibodies by using a WesternBreeze chromogenic immunodetection kit. Lane 1, total proteins from E. coli IT41/pTrcHisRR4; lane 2, total proteins from E. coli IT41/pTrcHisC; and lane 3, total proteins from E. coli IT41. Lane M, Bio-Rad Kaleidoscope prestained markers (carbonic anhydrase, 39.7 kDa; soybean trypsin inhibitor, 32.1 kDa).
|
|
|
|---|
Type I signal peptidases from many gram-negative bacteriaincluding E. coli and Salmonella enterica serovar Typhimuriumhave two transmembrane domains at the N terminus for assembly of the enzyme into the membrane and a carboxy-terminal catalytic domain (19, 24). However, type I signal peptidases from gram-positive bacteria (e.g., B. subtilis, Staphylococcus aureus, and Streptococcus pneumoniae) and some gram-negative bacteria (e.g., Bradyrhizobium japonicum and Rhodobacter capsulatus) (6, 19, 24), including rickettsiae, are smaller in size and have only a single transmembrane segment at the N terminus for its assembly into the membrane. The carboxy terminus carrying the conserved catalytic domains (boxes B through E) is also smaller in size compared with that of gram-negative E. coli (10, 24).
The analysis of the recently published genome sequences of R. prowazekii (2), R. conorii (23), Rickettsia sibirica, and the lepB sequence of R. rickettsii reported in this communication reveal that the putative genes secF (encoding protein export membrane protein SecF) and nuoF (encoding NADH dehydrogenase I chain F) are located upstream of the putative lepB (encoding type I signal peptidase) gene. We also show that the putative gene rnc (encoding RNase III, partial sequence of the 5' end) (Fig. 4A) is located downstream of lepB, such that the termination codon of the signal peptidase I (lepB) gene overlaps with the initiation codon of the RNase III (rnc) gene. The RT-PCR data presented here demonstrate that the putative genes secF, nuoF, lepB, and rnc are transcribed polycistronically from the same promoter in R. rickettsii and that the transcription start site is located further upstream of the polycistronic message of the secF-nuoF-lepB-rnc gene cluster. In Northern analysis, the presence of the 4.5-kb band further supports our explanation that the secF-nuoF-lepB-rnc gene cluster (approximate transcript size, 4.0 kb) (23) cotranscribes in a single polycistronic message in R. rickettsii.
Although polycistronic transcripts usually encode products involved in a common pathway (e.g., the trp and lac operon in E. coli), there are reports that the polycistronically transcribed lep operon (lepA and lepB genes) and lsp locus (lsp and ileS genes) in E. coli have unrelated functions (12, 18). The putative secF and lepB gene products are considered to be involved in the same protein secretion pathway (22); however, the cotranscription of the nuoF and rnc genes of secF-nuoF-lepB-rnc clustered in R. rickettsii could not be explained in terms of related functions. Genome analysis of rickettsiae (1, 2, 23) revealed that genome reduction is an ongoing process for obligate intracellular parasites. It was suggested that this reduction is due to the redundancy of the parasite genes for enzymatic activities supplied by the host cell. Therefore, intracellular parasites typically have fewer genes that code for biosynthetic functions than do free-living bacteria. Thus, one possible explanation for the coordinated expression of seemingly unrelated genes is reduction of transcriptional control. However, it is also possible that the functions may be related by an as-yet- unknown manner for obligate intracellular parasites.
The expression of the putative lepB gene of R. rickettsii and R. typhi from a plasmid in E. coli produced active type I signal peptidase, as demonstrated by complementation assay in this study in an E. coli strain IT41 that was temperature sensitive for preprotein processing at the nonpermissive temperature (42°C). The positive correlation between E. coli strain IT41 growth and the catalytic activity of plasmid-borne signal peptidase I at the nonpermissive temperature has been used to demonstrate the enzymatic activity of the putative type I signal peptidase gene from other gram-negative and gram-positive bacteria (8, 9, 24, 27, 28). Our complementation data presented here indicate that proteins that are processed by E. coli signal peptidase I and are essential for E. coli are also processed by the putative type I signal peptidase of R. rickettsii and R. typhi.
We are also thankful to Magda S. Beier for her assistance.
|
|
|---|
This article has been cited by other articles:
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Copyright © 2009 by the American Society for Microbiology. For an alternate route to Journals.ASM.org, visit: http://intl-journals.asm.org | More Info»