Laboratoire de Bioénergétique et Ingénierie des Protéines, IBSM, Centre National de la Recherche Scientifique,1 Université de Provence, Marseille, France2
Received 10 March 2003/ Accepted 28 May 2003
| ABSTRACT |
|---|
|
|
|---|
-L-Rhap-(1
4)-
-D-GalpA glycosidic bond in the backbone of rhamnogalacturonan I (RGI) via a ß-elimination mechanism. Its specific activity on potato pectic galactan and rhamnogalacturonan was found to be 28 and 3.6 IU/mg, respectively, indicating that Rgl11Y requires galactan decoration of the RGI backbone. The optimal pH of Rgl11Y is 8.5 and calcium is required for its activity. Rgl11Y was shown to be incorporated in the C. cellulolyticum cellulosome through a typical cohesin-dockerin interaction. Rgl11Y from C. cellulolyticum is the first cellulosomal rhamnogalacturonase characterized. | INTRODUCTION |
|---|
|
|
|---|
-(1,4)-linked D-galactopyranosyluronic acid (GalpA) residues. The carboxyl groups of some GalpA are methyl esterified and some residues are O-acetylated. The RGI, or hairy region, is composed of alternating L-rhamnopyranosyl (L-Rhap) and GalpA residues. Some GalpA residues of the disaccharide repeating unit [
4)-
-D-GalpA-(1
2)-
-L-Rhap-(1
] are O-acetylated (9, 35). "Hairy" refers to the many side chains of neutral polymers like arabinans, galactans, and arabinogalactans, which are attached to the rhamnose residues. Indeed, branched and linear oligosaccharides composed predominantly of
-L-arabinofuranosyl (L-Araf) and ß-D-galactopyranosyl residues (D-Galp) are linked to some Rhap residues. The RGII backbone is related to HG [linear chain of
-(1,4)-linked D-GalpA residues]. Four structurally different oligosaccharide side chains, comprising at least 11 different monosaccharides, including rare sugars such as apiose and aceric acid (10, 35), are linked to the GalpA residues of the backbone.
In primary plant cell walls, cellulose, hemicellulose (mannan, xylan, and xyloglucan, etc.), and pectin form a polysaccharidic extracellular matrix. In order to decompose plant cell wall polysaccharides, saprophytic and phytopathogenic microorganisms secrete a range of cellulases, hemicellulases, and pectinases. Some saprophytic clostridia such as Clostridium thermocellum, C. cellulovorans, and C. cellulolyticum secrete plant cell wall degrading enzymes assembled in multisubunit systems called cellulosomes (2, 4, 8, 15, 28, 36). The enzymes incorporated in the cellulosomes are mainly cellulases and hemicellulases (6, 11, 17, 18, 19, 22, 23, 25, 27, 39). So far, only one cellulosomal pectinase has been characterized (37), namely, C. cellulovorans pectate lyase Pel4A, which is an HG-degrading enzyme belonging to family 4 of the polysaccharide lyases according to the classification established by Coutinho and Henrissat (http://afmb.cnrs-mrs.fr/
pedro/CAZY/db.html). Polysaccharide lyases (EC 4.2.2.) are enzymes that cleave polysaccharide chains via a ß-elimination mechanism, resulting in the formation of a double bond at the nonreducing end of the product. Pectate lyases catalyze the ß-eliminative cleavage of
-(1,4)-glycosidic bonds between GalpA residues in pectate (a low methylesterified form of pectin), and generate
4,5 unsaturated GalpA as the product. Such enzymes have not been identified in the C. cellulolyticum cellulosomes, which contain several cellulases (4, 15) and a mannanase bound to a scaffolding protein CipC. Many of the latter enzymes have been extensively characterized (3, 4, 12, 14, 16, 34) as well as the scaffolding protein CipC (30, 31). CipC interacts with cellulose via its cellulose-binding module (CBM), allowing the anchorage of the cellulosome onto its preferential substrate. The genes encoding the cellulosomal components of C. cellulolyticum are organized in a 26-kb cluster. This large cluster, cipC-cel48F-cel8C-cel9G-cel9E-orfX-cel9H-cel9J-man5K-cel9M (1, 3), contains the genes encoding the scaffolding protein CipC, endo- and processive cellulases, mannanase, and a cohesin-containing protein of unknown function called OrfXp. Three isolated genes encoding cellulosomal cellulases CelA and CelD (12) and the noncellulosomal cellulase CelI were found elsewhere on the C. cellulolyticum chromosome (C. Tardif, personal communication).
The present report provides data indicating that a new gene rgl11Y (formerly named orfY), located downstream cel9M in the cel gene cluster of C. cellulolyticum encodes a cellulosomal endo-acting rhamnogalacturonan lyase, called RglY, belonging to family 11 of the polysaccharide lyases. Rgl11Y is the first cellulosomal rhamnogalactunonan lyase discovered to date.
| MATERIALS AND METHODS |
|---|
|
|
|---|
(Bethesda Research Laboratories) and E. coli BL21(DE3) (Novagen) were used as the host for pET-22b(+) (Novagen) derivative expression vector pETYhp3. E. coli was grown at 37°C in Luria-Bertani (LB) medium supplemented with ampicillin (100 or 200 µg/ml) when required. rgl11Y gene cloning and DNA sequencing. rgl11Y was located downstream of the cel9M gene in the large C. cellulolyticum gene cluster by inverse PCR from the total chromosomal DNA of C. cellulolyticum digested by PstI, with oligonucleotides 4060 (5'-GAC GGT GAA ATC AAT GCT CTT GAC CTT-3') and 214457 (5'-TTG CGT AAT CGA GAG CAT CTA CTA GCT TCC-3'). This way, the 3' region of the cel9M gene and the 5' region of the rgl11Y gene was sequenced. Restriction map of this DNA fragment revealed an HindIII site located 700 bp upstream of the PstI site used for the inverse PCR. To obtain the 3' region of the rgl11Y gene the total chromosomal DNA of C. cellulolyticum was digested by HindIII, and used for another inverse PCR. This second PCR was performed with oligonucleotides 422299 (5'-TTG TCC TGT TCT TGC ATC ACG G-3') and 421467 (5'-GGG TTT TGA AAT GTG GTC ATC AG-3') located between the restriction sites HindIII and PstI, and the 3' region of rgl11Y and the 5' region of the cel5N gene (the last gene of the 26-kb cluster) were sequenced this way. The accession number for this sequence is AF 316823.
The region of the rgl11Y gene that encodes the mature form of Rgl11Y was thus amplified by PCR with primers Y1 (5'-aattccatatgACGGCAGCATCGGCACGC-3') and Y7 (5'-gggctcgagCGAAAGCAAACTTGCTTTTAG-3'), generating an NdeI and an XhoI (underlined) site upstream and downstream of the Rgl11Y coding sequence, respectively. A 2-kb DNA fragment was amplified.
Since the rgl11Y gene contains an NdeI site, two steps were necessary to clone the 2-kb DNA fragment amplified by PCR into vector pET-22b(+). The PCR fragment was first digested by NdeI and HindIII, and the resulting 0.9-kb NdeI-HindIII fragment was cloned into NdeI-HindIII-linearized pET-22b(+), generating plasmid pETYa. Secondly, the 2-kb DNA fragment amplified by PCR was digested by HindIII and XhoI and the resulting 1.1-kb fragment was cloned into HindIII-XhoI-linearized pETYa.
The resulting plasmid, named pETYhp3, contains the gene encoding the mature form of Rgl11Y cloned in frame with 6 histidine codons. The inserted sequence was sequenced (Genome Express, Grenoble, France) to verify the lack of unwanted mutations and used to transform E. coli BL21(DE3).
Rgl11Y production and purification.
(i) Production and purification from inclusion bodies.
E. coli BL21(DE3) cells containing the recombinant plasmid pETYhp3 were grown in 50 ml of LB medium supplemented with ampicillin (100 µg/ml) at 37°C, 200 rpm, during 4 h. This preculture (4 ml) was used to inoculate 0.5 liter of LB medium (containing ampicillin 100 mg and 10 ml of glycerol 60%), which was incubated at 37°C up to an optical density of 0.8 at 600 nm. Cells were cooled to 15°C and IPTG (isopropyl-ß-D-thiogalactopyranoside) was then added to a final concentration of 100 µM, and the culture was continued for 16 h at 180 rpm. The cells were collected by centrifugation (10 min at 5,000 x g) and resuspended in 30 mM Tris-HCl (pH 8.0) containing 1 mM CaCl2. DNase I (5 µg/ml) was added to the crude extract, and cells were broken with a French press. After centrifugation, the pellet containing inclusion bodies was incubated for 30 min at room temperature with 8 M urea and then centrifuged (10 min at 5,000 x g).
The solubilized inclusion bodies were loaded onto 5 ml of Ni-CAMHC resin (Sigma) equilibrated in 30 mM Tris-HCl (pH 8.0) containing 1 mM CaCl2. The resin was washed with 30 mM Tris-HCl (pH 8.0) containing 1 mM CaCl2, and the recombinant protein Rgl11Y was eluted with 20 mM imidazole-30 mM Tris-HCl (pH 8.0). The eluate was dialyzed against 30 mM Tris-HCl (pH 8.0) containing 1 mM CaCl2 and concentrated by ultrafiltration in an Amicon cell (membrane cutoff, 10 kDa). Purified Rgl11Y was used to produce polyclonal antibodies.
(ii) Production of soluble Rgl11Y and purification.
E. coli BL21(DE3) cells containing recombinant plasmid pETYhp3 were grown in 50 ml of LB medium with ampicillin (100 µg/ml) at 37°C, 200 rpm, during 4 h. This preculture (4 ml) was used to inoculate 0.5 liter of LB medium containing ampicillin (200 µg/ml), sorbitol (1 M), and betaine (2.5 mM), which was incubated at 37°C to an optical density of 0.6 at 600 nm. After cooling to 18°C, IPTG was added to the culture to a final concentration of 100 µM. After 16 h of growth at 18°C, 180 rpm, the cells were collected by centrifugation (10 min at 5,000 x g), resuspended in cold 30 mM Tris-HCl (pH 8.0) containing 1 mM CaCl2, and washed three times with the same buffer to remove sorbitol. DNase I (5 µg/ml) was added to the crude extract and cells were broken with a French press. After centrifugation, the supernatant containing soluble recombinant Rgl11Y was loaded onto 5 ml of Ni-CAMHC resin (Sigma-Aldrich Co.) equilibrated with 30 mM Tris-HCl (pH 8.0) containing 1 mM CaCl2.
The resin was first washed with 30 mM Tris-HCl (pH 8.0) containing 1 mM CaCl2 and recombinant Rgl11Y was eluted with 20 mM imidazole-30 mM Tris-HCl (pH 8.0). The eluate was dialyzed against 30 mM Tris-HCl (pH 8.0)-1 mM CaCl2 and concentrated as previously described. The pure Rgl11Y obtained by this procedure was used for the kinetic assays. The Rgl11Y concentration was estimated spectrophotometrically at 280 nm in 6 M guanidine hydrochloride, based on the known amino acid composition of recombinant Rgl11Y.
SDS-PAGE. Sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) was performed with precast 12.5% polyacrylamide gels using a PhastSystem apparatus (Amersham Pharmacia Biotech) or polyacrylamide gels (8 or 10%) (Prosieve 50 Gel solution for protein analysis; TEBU) using a Vertical Electrophoresis System apparatus (Pharmacia Biotech).
Production of antibodies raised against the recombinant Rgl11Y. Polyclonal antibodies against Rgl11Y were raised in rabbits by subcutaneous injection of the protein purified from inclusion bodies. Antisera were stored at -20°C with 0.3% NaN3. Antisera raised against Rgl11Y was preadsorbed with an E. coli BL21(DE3)[pET22b(+)] extract.
Cellulosome production, purification and immunodetection of Rgl11Y. Cellulosomes were purified from a cellulose-grown culture supernatant of C. cellulolyticum and used to perform Western blot experiments as previously described (15).
Rgl11Y-dockerin/cohesin interaction. Interaction of Rgl11Y with cohesin was examined by using the biotinylated miniCipC1 probe as previously described (15, 32).
Enzymatic assays.
Rhamnogalacturonan lyase activity was assayed spectrophotometrically by measuring, at regular time intervals, the formation of
4,5 unsaturated galacturonic acid at 235 nm. The activity was calculated using the known molar extinction coefficient of 5,200 M-1 cm-1 (25). The substrates used were potato pectic galactan (PPG) and rhamnogalacturonan from Megazyme, and polygalacturonic acid and pectin from citrus from Sigma-Aldrich.
The specific activity of Rgl11Y was determined as follows. Five milliliters of substrate (0.5%, wt/vol) in 50 mM Tris-HCl (pH 8.5) containing 1 mM CaCl2 were incubated at 37°C with 5 µg of recombinant Rgl11Y. At regular time intervals aliquots were removed and the enzymatic reaction was stopped by adding 3 volumes of 50 mM HCl. Rgl11Y activity was expressed in international units (IU). One unit of enzyme activity correspond to the release of 1 µmol of product per min. For the determination of the rhamnogalacturonan lyase activity of the cellulosome, 60 µg of cellulosomes was used.
For the determination of the optimum pH the following buffers were used: 50 mM morpholinepropanesulfonic acid (MOPS), pH 6.0 and 6.5; 50 mM Tris-HCl, pH 7.0, 7.5, 8.0, 8.5, and 9.0; and 50 mM CAPS [3-(cyclohexylamino)-2-hydroxypropane-1-sulfonic acid]), pH 9.5, 10.0, and 10.5. All buffers contained 1 mM CaCl2 and the substrate concentration was of 0.5% (wt/vol).
Km and kcat values were determined in standard assay conditions used for the determination of the specific activity. Substrate concentrations ranged from 0.02 to 1% (wt/vol).
The influence of metal ions on the activity of Rgl11Y was determined after a 30 min pretreatment of the enzyme with 5 mM EDTA, at 4°C. The activity then was measured as previously described, using 50 mM Tris-HCl (pH 8.5) buffer supplemented with 5, 10, and 25 mM concentrations of CaCl2, MgCl2, MnCl2, LiCl2, and NiCl2.
| RESULTS |
|---|
|
|
|---|
The analysis of the deduced amino acid sequence of rgl11Y, revealed a multidomain protein with an N-terminal signal sequence, containing a putative cleavage site located between alanines 27 and 28. A 594-amino-acid putative catalytic domain and a 55-amino-acid putative dockerin domain characteristic of C. cellulolyticum cellulases follow this signal peptide (Fig. 1). The putative catalytic domain of Rgl11Y presents extensive sequence similarity with family 11 polysaccharide lyases of the carbohydrate-active enzyme database (http://afmb.cnrs-mrs.fr/CAZY) (Table 1). Among the polysaccharide lyase family 11 members, only Pseudomonas cellulosa Rgl11A has been characterized (25). This protein is a multidomain rhamnogalacturonan lyase containing an N-terminal signal sequence, a 596-amino-acid catalytic domain, a 94-amino-acid domain exhibiting extensive identity with fibronectin type 3 modules found in a range of glycoside hydrolases and pectate lyases, and a C-terminal 90 residue CBM from family CBM2. Rgl11A is an endo-acting rhamnogalacturonan lyase that cleaves
-L-Rhap-(1
4)-
-D-GalpA bonds in the backbone of deesterified RGI.
|
|
When expressed in E. coli, foreign proteins often accumulate as insoluble aggregates of improperly folded proteins called inclusion bodies. Under standard growth and standard induction conditions (Novagen protocol), E. coli transformed with pETYhp3 produces recombinant Rgl11Y in inactive and insoluble aggregates. Isolated inclusion bodies were solubilized by 8 M urea, purified and refolded in an appropriate buffer (see Materials and Methods). The pure renaturated Rgl11Y, which was found to be inactive on all tested substrates (PPG and rhamnogalacturonan), was used to prepare rabbit antibodies.
Various conditions have been tested in order to obtain soluble proteins, including induction between 15 and 20°C, the use of lower concentrations of IPTG (10 to 100 µM), and/or the use of a specific culture medium (5). Soluble and active recombinant Rgl11Y was produced only by growing and inducing the cells under osmotic stress in the presence of sorbitol (1 M) and betaine (2.5 mM) (5, 20, 21). Approximately 50% of recombinant Rgl11Y was produced in the soluble fraction of E. coli cell extracts by using 100 µM IPTG and an induction temperature of 18°C. Rgl11Y was purified by a one-step procedure on a nickel-nitrilotriacetic acid column. The recombinant protein has an apparent molecular mass of 75 kDa on SDS-PAGE (Fig. 2), in good agreement with its theoretical mass (72,054 Da).
|
The enzymes that depolymerize the backbone of rhamnogalacturonan utilize two distinct cleavage mechanisms, either hydrolytic, or ß-eliminative. The method used to evaluate Rgl11Y activity provides experimental evidence that Rgl11Y is a rhamnogalacturonan lyase (25). Indeed, lyases catalyze the ß-eliminative cleavage of glycosidic bonds with the production of
4,5 unsaturated sugar, which can be followed spectrophotometrically at 235 nm.
The kinetic parameters of the recombinant enzyme, kcat and Km were found to be 34 s-1 and 1 g/liter, respectively, on PPG. The pH optimum for Rgl11Y activity using PPG as a substrate was found to be 8.5. At the optimum pH for most of the C. cellulolyticum cellulases (pH 6 to 7), Rgl11Y displayed only 4 to 13% of its maximal activity. At pH 10, Rgl11Y was completely inactive.
To address the influence of metal ions on the catalytic activity of Rgl11Y, the enzyme was subjected to an EDTA treatment, which completely abolished activity against PPG. Incubation of the inactivated enzyme with zinc, magnesium, manganese, lithium or nickel did not restore activity. Only the addition of 10 mM of calcium was able to restore 80% of the Rgl11Y activity obtained in standard assay conditions.
Rgl11Y, an enzymatic subunit of the cellulosomes. The presence of Rgl11Y in the cellulosomal fraction purified from a C. cellulolyticum cellulose culture was monitored by a Western blotting experiment, as previously described (15) using antibodies raised against Rgl11Y. Cellulosome components were separated into subunits by SDS-PAGE (Fig. 3, lane 1), transferred on a nitrocellulose membrane and incubated with anti-Rgl11Y antibodies. The results obtained (Fig. 3, lane 3) suggest that Rgl11Y is an enzymatic subunit of the cellulosomes with an estimated molecular mass of 84 kDa. The difference between the estimated molecular mass of the cellulosomal and recombinant form of Rgl11Y, 84 and 75 kDa, respectively, is probably attributable to glycosylation (15, 31).
|
The possible involvement of a cohesin-dockerin interaction in the association of Rgl11Y with the scaffolding protein CipC was studied as follows. Recombinant Rgl11Y was subjected to SDS-PAGE, blotted onto nitrocellulose and then incubated with a biotinylated-miniCipC1, a recombinant form of the scaffolding protein CipC containing the first cohesin domain (15, 32). Data obtained (Fig. 4) provide experimental evidence that the incorporation of Rgl11Y into the C. cellulolyticum cellulosome is mediated by a typical cohesin-dockerin association.
|
Based on the specific activity of Rgl11Y and assuming that Rgl11Y is the only cellulosomal rhamnogalacturonan lyase, one can estimate that Rgl11Y represents less that 1% of the total cellulosomal proteins. This result is in agreement with the cellulosomal Coomassie-blue-stained Rgl11Y (Fig. 3, lane 1), which appears as a minor cellulosomal protein in the culture conditions used here to grow C. cellulolyticum.
| DISCUSSION |
|---|
|
|
|---|
To date, only two lyases have been found in cellulosomes, namely, Rgl11Y described here and Pel4A from C. cellulovorans, a multidomain pectate lyase belonging to family 4 of the polysaccharide lyases (37). Although these two enzymes share the same ß-elimination mechanism, they degrade two distinct regions in the pectin molecule. Whereas Rgl11Y digests the RGI backbone, Pel4A cleaves HG chains in pectate (a low methylesterified form of pectin). Rgl11Y from C. cellulolyticum therefore provides the first example of a cellulosomal rhamnogalacturonase. Its incorporation into cellulosomes is mediated by a typical cohesin-dockerin interaction.
Cellulosomal enzymes of C. thermocellum and C. cellulovorans are able to catalyze the degradation of a wide range of substrates including cellulose, xylan, mannan (in C. thermocellum and C. cellulovorans), chitin (C. thermocellum), and pectin (C. cellulovorans) (6, 11, 17, 18, 19, 22, 23, 24, 39). In contrast, C. cellulolyticum cellulosomal enzymes characterized to date are mainly cellulases, although xylanases (27) and a mannanase (A. Bélaïch, unpublished data) are also present. The present report indicates that C. cellulolyticum is also able to secrete a range of plant cell wall polysaccharide-degrading enzymes including pectinases, similar to C. thermocellum and C. cellulovorans.
The specific activity of Rgl11Y was found to be 28 IU/mg on PPG, whereas it was only 3.6 IU/mg on rhamnogalacturonan. Sequence similarity places Rgl11Y in family 11 of the polysaccharide lyases. In this sequence-based family, only Rgl11Y and Rgl11A from P. cellulosa have been extensively characterized (25). Rgl11Y and Rgl11A are comparable in terms of substrate specificity, catalytic properties (kcat, 34 and 65 s-1, respectively; Km, 1 and 8.5 mg/ml, respectively) (25), pH optimum (8.5 and 9.5, respectively), and Ca2+ requirement. Galactan side chains seem to be required for the rhamnogalacturonan lyase activity. McKie et al. (25) have shown that Rgl11A from P. cellulosa cleaved an oligosaccharide comprising the backbone Rhap1-GalpA1-Rhap2-GalpA2-Rhap3-GalpA3 in which Rhap1 and Rhap2 are substituted by galactose residues. Moreover it has been shown that removal of galactan side chains from RGI backbone decreased the catalytic efficiency of a rhamnogalacturonan lyase (family 4 of the polysaccharide lyases) from Aspergillus aculeatus (29). According our data Rgl11Y from C. cellulolyticum may have the same galactan requirement.
It is interesting to compare the modular organization of Rgl11Y and Rgl11A. In addition to its catalytic domain, Rgl11A contains a domain exhibiting significant sequence similarity to fibronectin type 3 modules, and a C-terminal CBM. The presence of CBMs in pectinases is rare in the microbial world. Rgl11A from P. cellulosa and the pectate lyase Pel10A from the same bacterium constitute two of the few examples of CBM-containing pectinases (7, 25). Rgl11A and Pel10A from P. cellulosa could interact with cellulose fibers via their CBMs, and would thus be in close proximity of their target substrates, namely, the main chain of the hairy and smooth regions in the pectin molecule (7, 25). Pel4A from C. cellulovorans also contains a CBM (37). Although the C. cellulolyticum Rgl11Y polypeptide does not contain a CBM, the enzyme is probably brought in contact to cellulose via the cellulosomal scaffolding protein, which contains a CBM. This would bring Rgl11A close to its preferential substrate, which is tightly associated to cellulose microfibrils in the primary plant cell wall. It is likely that this could render rhamnogalacturonan degradation easier.
The optimum pH of most of the C. cellulolyticum cellulases is around 6.5, whereas that of Rgl11Y is 8.5. The optimum pH value of Rgl11Y is similar to those of P. cellulosa Rgl11A (pH 9.5) and Pel10A (pH 10) and C. cellulovorans Pel4A (pH 8.0) (25, 37). It has been suggested that the pH value of some plant tissues changes during microbial attack. This could indicate that the degradation of plant cell wall polysaccharides occurs sequentially according to the pH of the plant tissues.
Cellulosomal gene clusters have been cloned and sequenced in C. cellulolyticum and C. cellulovorans. In C. cellulovorans the 22-kb cluster cbpA-exg48S-eng9H-eng9K-hbpA-eng9L-man5A-eng9M-eng9N is flanked at the 5' and 3' ends by genes that do not encode cellulosomal components. Unlike the gene encoding C. cellulolyticum Rgl11Y, the gene encoding C. cellulovorans Pel4A is not included in the cluster (37, 38). The pel4A gene is located in a 3.7-kb EcoRI-HindIII DNA fragment containing genes engY and helA, which encode an endoglucanase and a DNA helicase, respectively.
To date 12 genes encoding C. cellulolyticum cellulosomal components have been found in the large cluster cipC-cel48F-cel8C-cel9G-cel9E-orfX-cel9H-cel9J-man5K-cel9M-rgl11Y-cel5N. The last identified gene, cel5N, located at the 3'-extremity of the cluster encodes a putative family 5 glycoside hydrolase containing a typical C-terminal dockerin domain (A. Bélaïch, unpublished data). In total, the cluster is 26 kb long, and so far is the largest cel cluster identified in cellulosome-producing clostridia. The region flanking the 3' extremity of the cluster has not been investigated in detail yet. The sequencing of approximately 2 kb (H. Maamar, personal communication) upstream of the cipC gene reveals that cipC is the first gene of the cel cluster.
| ACKNOWLEDGMENTS |
|---|
We thank H. Maamar for providing purified cellulosomes from C. cellulolyticum. C. Giacalone and G. Sugier are thanked for their help during the cloning of the rgl11Y gene. We are indebted to P. de Philip, C. Tardif, H.-P. Fierobe, and B. Henrissat for critically reading the manuscript and D. Henrissat for correcting the English manuscript.
| FOOTNOTES |
|---|
| REFERENCES |
|---|
|
|
|---|
-l-rhamnopyranosyl-(1, 4)-
-D-galactopyranosyluronide lyase from Aspergillus aculeatus. Plant Physiol. 117:141-152.
This article has been cited by other articles:
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Appl. Environ. Microbiol. | Infect. Immun. | Eukaryot. Cell |
|---|---|---|
| Mol. Cell. Biol. | J. Virol. | Microbiol. Mol. Biol. Rev. |
| ALL ASM JOURNALS |