Previous Article | Next Article ![]()
Journal of Bacteriology, August 2003, p. 4837-4843, Vol. 185, No. 16
0021-9193/03/$08.00+0 DOI: 10.1128/JB.185.16.4837-4843.2003
Copyright © 2003, American Society for Microbiology. All Rights Reserved.
Departments of Bacteriology,1 Biochemistry, University of WisconsinMadison, Madison, Wisconsin2
Received 10 March 2003/ Accepted 13 May 2003
|
|
|---|
|
|
|---|
![]() View larger version (21K): [in a new window] |
FIG. 1. 2-MC cycle of serovar Typhimurium. The boxed area of the scheme highlights the reaction catalyzed by the 2-MICL (PrpB) enzyme, the focus of the present work.
|
/ß-barrel superfamily (19). The
/ß-barrel proteins are known to be a very diverse group of enzymes that may catalyze different reactions by binding substrate differently inside the barrel. The evolutionary link between the mutases and the lyases is strengthened by the fact that the key active-site residues required for PEP mutase catalysis are invariant in the lyases (19). Although the PrpB enzyme catalyzes a reaction similar to that catalyzed by ICL, the PrpB enzyme shares more sequence identity with CPEP and PEP mutases (36 and 30% end-to-end identity, respectively) than with ICL (ca. 20% identity). Structure-function analyses of PEP mutase have shed valuable insights into how this enzyme and probably how ICL and 2-MIC lyase (2-MICL) enzymes may work. Early studies of the PEP mutase mechanism entertained the possibility that residue D58 could serve as a phosphoryl group acceptor during a reaction involving a modified enzyme intermediate (20). Recently reported evidence, however, ruled out a phosphoryl transfer mechanism directly involving residue D58, and proposed that PEP mutase catalyzes the phosphoryl transfer via a dissociative mechanism with residues R159 and H190 residues holding the phosporyl-metaphosphate-phosphonyl group stationary during the reaction (23). Mechanisms of catalysis have also been proposed for the ICL proteins based on three-dimensional structures and data from active-site mutant proteins (5, 6, 34). Based on ICL structures with bound inhibitors and previous inhibition experiments using 3-bromopyruvate and iodoacetate, it was concluded that a cysteinyl residue was most likely the active-site residue required for isocitrate cleavage (5, 6, 21, 26, 34). It is interesting that an equivalently positioned cysteinyl residue is not conserved in PEP mutase, yet is conserved in CPEP mutase and the lyases (Fig. 2). Crystal structures of ICL from three different organisms have revealed an electronegative depression which is responsible for the binding of a Mg2+ ion in each of the structures; this negatively charged region is created by four carboxyl groups corresponding to residues D58, D85, D87 and E115 of serovar Typhimurium PrpB (5, 6, 34).
|
View larger version (16K): [in a new window] |
FIG. 2. PrpB homologs. Amino acid sequence alignments between serovar Typhimurium (S.T.) PrpB, E. coli K-12 (E.c.) PrpB, Streptomyces hygroscopicus CPEP mutase (S.h. CPEPmu), M. edulis PEP mutase (M.e. PEPmu) and E. coli K-12 ICL. Boxed residues correspond to those implicated in the PEP mutase or ICL reaction mechanisms as described in the text. Serovar Typhimurium PrpB protein sequence was compared with sequences deposited in GenBank using the BLAST algorithm (1, 2). Sequence alignments between serovar Typhimurium PrpB and other homologs were performed by ClustalW (40).
|
|
|
|---|
|
View this table: [in a new window] |
TABLE 1. Strains and plasmids used in this studya
|
(ii) Plasmid pPRP75.
A 1-kb XbaI fragment from plasmid pPRP65 was ligated into the arabinose-inducible vector pBAD30 (12) and transformed into the restriction-deficient modification-proficient serovar Typhimurium strain JR501 (41) as described (33). The resultant colonies were screened for the prpB gene in the correct orientation and the resulting plasmid was named pPRP75.
(iii) Plasmids pPRP76, pPRP78-80, and pPRP131.
Site-directed mutagenesis was performed via the three-primer PCR mutagenesis (25) using plasmid pPRP65 as a template. Primers were designed flanking the T7 promoter and T7 terminator sites of plasmid pPRP65; primer site 5'-GAATTGTGAGCGGATAAC-3' for the T7 promoter region, and primer site 5'-AGCCAACTAAGCTTCCTTTCGG-3' for the T7 terminator region. Mutagenic primers contained 5' phosphorylation modifications; sequences of the primers used are available upon request. PCR amplification products were purified using the QIAquick PCR Purification kit (Qiagen) and cut with the restriction enzyme XbaI. The restriction fragments were cleaned and ligated with plasmid pBAD30 cut with XbaI. Ligation products were introduced into electrocompetent cells of strain JR501 via electroporation and these cells were transferred onto LB plates supplemented with AMP (100 µg/ml). Colonies were screened for vector containing insert in the correct orientation. Each plasmid was sequenced using pBAD30 primers (pBAD30-3', 5'-GGCTGAAAATCTTCTCTCAT-3'; pBAD30-5', 5'-CAACTCTCTACTGTTTCTTT-3') to determine whether the correct mutation was incorporated into the prpB gene and that no other mutations were introduced during amplification. PCR sequencing reactions were prepared using Big Dye (Biotechnology Center, University of WisconsinMadison). Reactions were purified in AutoSeq G-50 columns (Pharmacia Biotech), dried in a SpeedVac concentrator (Savant), and sequenced at the Biotechnology Center (University of WisconsinMadison). Plasmids were named pPRP76 (prpBD58A), pPRP78 (prpBH125A), pPRP79 (prpBC123A), pPRP80 (prpBK121A), and pPRP131 (prpBR122K) (Table 1). Plasmids from strain JR501 were introduced into desired genetic backgrounds by transformation (29).
(iv) Plasmids pPRP82, pPRP84-86, and pPRP132.
Plasmids pPRP76, pPRP78-80, and pPRP131 were cut with NcoI-HindIII and ligated into plasmid pET15b cut with the same enzymes to yield plasmids pPRP82, pPRP84-86, and pPRP132, respectively. prpB alleles in plasmid pET15b were used to overproduce mutant PrpB proteins.
Sequencing mutant alleles of prpB. To determine the locations of prpB mutations in strains JE3946 and JE3961, overnight cultures were grown in LB medium and boiled in sterile water (1:10 dilutions) as templates. PCRs were prepared with 10 µl of template in a 100-µl reaction containing 50 pmol of each primer, a 0.2 mM concentration of each deoxyribonucleoside triphosphate, and 3 U of ENZY+ DNA polymerase (Enzypol Ltd.) according to the manufacturer's instructions. Reactions were performed in a GeneAmp PCR system 2400 (Perkin-Elmer, Norwalk, Conn.) using the following conditions: 30 cycles at 95°C for 1 min, 50°C for 1 min, and 72°C for 1 min. Primers used were 5'-CTCGCTGCCTCTTTGCCTGGC-3' (60 bp upstream of prpB) and 5'-GCATTGCCTGATGGCGGCTTCG-3' (23 bp downstream of prpB). Amplified DNA was purified using the QIAquick PCR purification kit (Qiagen). PCR sequencing reactions were carried out as described above.
Complementation analysis. Plasmids pBAD30, pPRP21, pPRP75-6, pPRP78-80, and pPRP131 were each introduced into mutant strain JE3946. These resulting strains were grown overnight in LB medium containing AMP (100 µg/ml). Four microliters of each overnight culture was inoculated into wells of a 96-well Falcon (Becton Dickinson) microtiter dish containing 200 µl of a no-carbon E (NCE) medium (3) with methionine (0.5 mM), propionate (30 mM), MgSO4 (1 mM), glycerol (1 mM), AMP (50 µg/ml), and various amounts of L-(+)-arabinose (0, 50, 100, 250, or 500 µM). The density of the cultures in the wells was monitored at 650 nm with a SpectraMAX Plus spectrophotometer (Molecular Devices). The plate chamber was maintained at 37°C. Absorbance measurements were taken every 15 min for 72 h with agitation (780 s) between reads.
Overproduction and purification of H6PrpB and mutant proteins.
Plasmids pPRP65, pPRP82, pPRP84-86, and pPRP132 were introduced into serovar Typhimurium strain JE5256 [metE205 ara-9 prpB121::Tn10d(Tc)/pGP1-2 rpo+ kan+]. The resulting strains were used to overproduce and purify PrpB and the PrpB variant proteins. Each strain was inoculated into 25 ml of LB broth containing AMP (100 µg/ml) and KAN (60 µg/ml) at 30°C. From the overnight cultures, 20 ml was inoculated into 2 liters of LB broth supplemented with AMP (100 µg/ml) and KAN (60 µg/ml). Cultures were grown in at 30°C to an A590 of 0.5 and transferred to a 42°C water bath for 1 h to induce synthesis of the T7 RNA polymerase. Cultures were incubated for 4 h at 37°C and harvested by centrifugation at 11,700 x g with a SS34 rotor for 10 min in a Sorvall RC-5B refrigerated centrifuge (DuPont). Cell pellets were resuspended in 40 ml of 20 mM Tris-HCl buffer, pH 7.9, containing 0.5 M NaCl and 5 mM imidazole. Cells were broken with a French pressure cell at
104 kPa. Cellular debris was discarded after centrifugation at 39,000 x g for 45 min at 4°C. H6PrpB and mutant proteins were isolated from crude supernatants by nickel-affinity chromatography according to the manufacturer's (Novagen) instructions. Proteins were separated by sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) (22) with 12% polyacrylamide gels and visualized by Coomassie blue R-250 staining (30). Fractions containing purified (>95%) H6PrpB wild-type and mutant proteins were dialyzed overnight at 4°C against 1 liter of K+ HEPES buffer (pH 7.5; 50 mM), EDTA (2.5 mM), and DTT (5 mM). Proteins were then dialyzed twice into 1 liter K+ HEPES buffer, pH 7.5 (50 mM), and DTT (5 mM) for 2 h each. The hexahistidine tag was removed with the thrombin cleavage capture kit of Novagen according to the manufacturer's instructions. Resulting PrpB proteins had three extra amino acids at its N terminus (Gly, Ser, and His). Detagged proteins were dialyzed into 1 liter of K+ HEPES buffer (pH 7.5; 50 mM) and DTT (5 mM) for 2 h. Glycerol (5% [vol/vol] final concentration) was added to each protein solution. The proteins were flash-frozen as drops in liquid nitrogen and stored at -85°C. The yield obtained under these conditions was
25 mg of protein per liter of culture. No detectable loss of activity was observed after 6 months of storage.
2-MICL assay. Protein concentrations were determined by the method of Bradford (4) using a standard curve generated with bovine serum albumin (Sigma). Lyophilized 2-MIC was dissolved in 0.6 M NaOH and heated at 90°C for 45 min to saponify the lactone ring. Saponified 2-MIC was diluted into 50 mM HEPES buffer, pH 7.5, before use in assays. The reaction mixture (final volume,1 ml) for the 2-MICL assay contained K+ HEPES buffer (pH 7.5; 50 mM), MgCl2 (2.5 mM), DTT (5 mM), rabbit muscle LDH (1 U), NADH (250 µM), PrpB protein, and various concentrations of 2-MIC. Detagged PrpB protein was used in all assays unless specified otherwise. The progress of the reaction was monitored as a decrease in absorbance at 340 nm in a computer-controlled Perkin-Elmer Lambda 40 UV/VIS spectrophotometer (Perkin-Elmer). The assay cuvettes were maintained at 37°C with a circulating water bath. The extinction coefficient for NADH at 37°C was taken to be 6,110 mM-1 cm-1 (10). Inactive PrpB mutant proteins were tested for 2-MIC cleavage over 24 h. For this purpose, PrpB protein (up to 100 µg) was added to K+ HEPES buffer (pH 7.5; 50 mM), MgCl2 (2.5 mM), and DTT (5 mM) in sealed vials, the headspace was flushed with N2 for 15 min, and these vials were incubated at 30°C for 24 h. Activity was assayed by adding rabbit muscle LDH (1 U) and NADH (250 µM) and monitored for a decrease in absorbance at 340 nm as described above.
Optimization of assay conditions. For coupled assays, the amount of LDH in the reaction mixture was maintained at an activity level of at least 10-fold excess over that of the PrpB protein.
pH. The average of at least three independent reactions is reported using the following buffers: MES, pH 6.0 and 6.5; HEPES, pH 7.0, 7.5, and 8.0; and EPPS, pH 8.5.
Temperature. To determine the temperature profile of the reaction the assay mixture without enzyme was preincubated at the specified temperatures for 5 min and the reaction was started by the addition of PrpB protein. The stability of PrpB proteins at different temperatures was assessed by incubation at the specified temperature for 10 min and then assaying for 2-MICL activity at 37°C.
Metal requirement and ionic strength. Assays were conducted as described above with either variation of the concentration of MgCl2 (0 to 5 mM), replacement of MgCl2 with MnCl2 (5 mM), or addition of NaCl (0 to 250 mM) to the assay mixture.
Kinetic analyses. Kinetic constants for PrpB activity were determined by varying the concentration of 2-MIC. Assay sets contained at least 10 points and each set was performed in quadruplicate. Initial velocity data were analyzed using the program GraFit (version 4.0; Erithacus Software Ltd., Staines, United Kingdom). The kcat values were calculated from Vmax and [E] according to the equation kcat = Vmax/[E] where Vmax is the maximal velocity (determined from the GraFit results) and [E] is the molar concentration of the PrpB tetramer based on protein concentrations as determined by the Bradford assay (4).
ICL assay. Due to the low detection limit of glyoxylate by the 2-MICL assay utilizing LDH as a coupling enzyme, a phenylhydrazine assay was used to test for isocitrate cleavage by PrpB and PrpBR122K enzymes. The reaction mixture contained 2.5 mM MgCl2, 4 mM phenylhydrazine-HCl, and 5 mM DTT. Progress of the reaction was monitored at 324 nm. Commercially available ICL (Sigma) was used as positive control. Reactions were also allowed to proceed for 24 h to determine if any remaining activity was associated with mutant proteins. The extinction coefficients of glyoxylate-phenylhydrazone (16.8 mM-1 cm-1) and pyruvate phenylhydrazone (10.2 mM-1 cm-1) have been reported (38).
Immunoblot analysis. Serovar Typhimurium strains JE3946 and JE3961 carry mutant prpB alleles (16). These strains along with prpB+ strain TR6583 were grown overnight in 5 ml of an NCE medium (3) supplemented with methionine (0.5 mM), MgSO4 (1 mM), glycerol (22 mM), and propionate (5 mM) to induce expression of the prpBCDE operon (42). One milliliter of each culture was harvested, cells were broken open with BugBuster (Novagen) according to the manufacturer's specifications, and 15 µg of protein from each cell extract was resolved by SDS-PAGE (22). Protein was transferred to nitrocellulose membrane and blocked with powdered milk (45). Blots were probed using polyclonal anti-PrpB antibodies generated against purified H6PrpB protein at the University of WisconsinMadison Animal Care Unit. Blots were probed with donkey anti-rabbit immunoglobulin G conjugated to horseradish peroxidase (Pierce) and developed with ECLPlus Western blotting detection system (Amersham Pharmacia, Little Chalfont, Buckinghamshire, England).
|
|
|---|
![]() View larger version (85K): [in a new window] |
FIG. 3. Overproduction and purification of hexahistidine-tagged and detagged PrpB proteins. Lanes: Standards, Novagen Perfect Protein SDS-PAGE markers; Vector-only, pET15b vector-only control; Induced, H6PrpB overproduction; Soluble and Insoluble, soluble and insoluble protein of H6PrpB overproduction cell extracts, respectively; H6PrpB, purification of H6PrpB after nickel chelation-affinity chromatography; PrpB, purified detagged PrpB after cleavage with thrombin.
|
Requirement for a reducing agent. The PrpB enzyme from serovar Typhimurium required a reducing agent (DTT or reduced glutathione) for maximal activity. PrpB protein dialyzed for 4 h at 4°C in buffer without DTT lost all detectable activity. Partial activity (approximately 50%) was restored when the enzyme was incubated in the presence of 5 mM DTT for 15 min. However, greater than 95% of the original activity was retained if dialysis was performed for 4 h in the presence of DTT, indicating that the enzyme was stable under the dialysis conditions used as long as DTT was present in the buffer. To determine whether the reducing agent was needed to prevent formation of disulfide bond(s) or to avoid oxidation of a critical residue, the disulfide bond-specific reductant TCEP (9) was added to protein that had been dialyzed in the absence of reducing agent. TCEP failed to restore any detectable activity to PrpB suggesting that an oxidation-sensitive residue may play a crucial role in catalysis.
Metal requirement. The PrpB protein from serovar Typhimurium required a divalent metal cation for maximal activity. Mg2+ ions (2.5 mM) supported the highest specific activity of the enzyme. The apparent Km for Mg2+ under these assay conditions was 38 µM. Equimolar concentrations of Mn2+ ions supported activity, but only at 28% of the specific activity of PrpB with Mg2+. Ca2+ ions failed to support lyase activity and were in fact slightly inhibitory (data not shown).
Ionic strength. Increases in the ionic strength in the assay resulted in decreased specific activity of the PrpB enzyme. PrpB retained 81% of its specific activity at 50 mM NaCl, 63% at 100 mM NaCl, and only retained 41% of its activity at 250 mM NaCl. These data were consistent with reports of ICL inhibition by inorganic anions (43).
Substrate specificity. The PrpB enzyme of serovar Typhimurium appears to be specifically designed to cleave 2-MIC; PrpB did not cleave isocitrate at any detectable levels, even after incubation with isocitrate for 24 h.
Kinetic parameters. Based on four independent trials, the Km of H6PrpB for 2-MIC was 19 µM, with a kcat of 105 s-1 for the tetrameric enzyme. The Km of the detagged PrpB protein for 2-MIC was 18 µM, with a kcat of 74 s-1 (Table 2). The observed reduction in kcat of detagged PrpB enzyme could be due to inactivation of the enzyme during removal of the hexahistidine tag, which was performed in the absence of reductant.
|
View this table: [in a new window] |
TABLE 2. Kinetic parameters for PrpB and mutant PrpB proteinsa
|
![]() View larger version (46K): [in a new window] |
FIG. 4. Electrophoretic behavior of wild-type and mutant PrpB proteins under nondenaturing conditions. Conditions for nondenaturing PAGE were as described above. The protein used is indicated above each lane. Numbers in parentheses indicate the change in isoelectric point in comparison to H6PrpB. Size markers used were bovine serum albumin (66 kDa) and ß-amylase (200 kDa) (Sigma).
|
Can PrpB be converted into an ICL by mutation? Ways of distinguishing genes encoding ICLs from those encoding 2-MICLs have been suggested (28). Because all characterized ICLs contain a KKCGH motif while all known 2-MICLs contain a corresponding KRCGH motif, it has been proposed that 2-MICL enzymes might be recognized by a KRCGH motif while ICLs may be recognized by the KKCGH sequence (7). To determine whether residue R122 of PrpB was involved in substrate specificity, a R122K change was introduced by site-directed mutagenesis and the resulting protein was assayed for ICL and 2-MICL activities. The PrpBR122K protein retained about 50% of the 2-MICL activity, and still failed to cleave isocitrate at any detectable level. These results indicate that a single change in the KKCGH motif does not change the specificity of the 2-MICL enzyme for its substrate. A likely explanation for having R122 in 2-MICLs is that an arginine residue is required in this position of the protein to facilitate closure of the active site loop over the substrate, similarly to that proposed for K189 of Mycobacterium tuberculosis ICL (34).
Identification of lesions in prpB generated by random chemical mutagenesis and stability of the resulting proteins. The prpB allele of previously isolated prpB mutant strains (JE3946 and JE3961) was sequenced to determine whether the mutations were in the active site of PrpB. Both strains carried only one amino acid change. In strain JE3946 prpB had a change at position E188 to a lysine (E188K), while strain JE3961 contained a G55K change. Mutant protein PrpBG55K was stable as determined by immunoblot analysis. This mutation most likely caused a propionate phenotype due to a disruption in the positioning of the nearby crucial D58 residue. In contrast, protein PrpBE188K was unstable (data not shown), suggesting that this amino acid change likely disrupted protein folding making the protein sensitive to degradation.
|
|
|---|
The wild-type PrpB enzyme of serovar Typhimurium. Kinetic parameters have been determined for the PrpB enzyme from E. coli. In the study by Brock et al. (7), PrpB from E. coli was determined to have a Km of 19 µM for 2-MIC and a Km of 35 µM for Mg2+. The close agreement of the kinetic parameters determined for the PrpB enzyme of serovar Typhimurium (Km of 19 µM for 2-MIC and a Km of 38 µM for Mg2+) to those reported for the E. coli PrpB protein was expected considering that the amino acid sequence of these two enzymes is 90% identical. Unlike the E. coli enzyme, however, the serovar Typhimurium enzyme was able to use Mn2+ instead of Mg2+ ions, albeit poorly. The activity of PrpB from serovar Typhimurium required a reducing agent for maximal activity, which has also been observed in ICL and in PrpB enzymes from E. coli and A. nidulans (7, 43). However, failure of the disulfide-specific reductant TCEP to reactivate oxidized, inactive PrpB enzyme, suggested the need to prevent a redox active residue (such as a cysteine) from oxidizing, rather than preventing a disulfide bond from forming.
Insights into the PrpB reaction mechanism. Hypotheses of the PrpB reaction mechanism were proposed based on mechanisms for ICL and PEP mutase proteins with which the PrpB protein shares homology (7, 20). On the basis of the work reported here, it is hypothesized that the mechanism of PrpB action is similar to that of ICL based on the similarities in structure of substrates, and in similarities between the active site loop region between ICL and 2-MICL, i.e., the K(R/K)CGH motif. Both ICL and E. coli PrpB can be inactivated by treatment with cysteine-modifying agents (7, 31). Our data indicate that residue C123 is critical to catalysis.
The three-dimensional crystal structure of serovar Typhimurium apo-PrpB has been solved to a 2.1-Å resolution (H. Holden and I. Rayment, unpublished results). The structure confirms the oligomeric state of PrpB to be a dimer of dimers; the structure of the monomer is an atypical
/ß-barrel similar to the one of PEP mutase and ICL (5, 6, 19, 34). The region of the polypeptide spanning residue C123, however, is disordered, most likely due to the lack of substrate in the active site. Based on similarities of PrpB to ICL and data presented here, it is hypothesized that residue C123 serves as the active site base of PrpB and residue D58 is required for the binding of the Mg2+ ion. Elucidation of the structure of PrpB complexed with its substrate in the active site will provide further insights into the reaction mechanism of this enzyme.
During the review of this work, the three-dimensional crystal structure of E. coli PrpB protein was published (11). In this structure, the active-site loop was modeled in place based on the structure of the ligand-bound M. tuberculosis ICL. In this structure, residue D58 appears critical to the positioning of a Mg2+ ion in the active site. Our results would support the proposed role for residue D58. In the same structure, active-site residue R122 does not appear to play a role in substrate recognition because it points away from the active site in the modeled loop. The authors postulate that the reaction mechanism proceeds identically to the ICL mechanism based on similarities in structure.
We thank W. W. Cleland (University of WisconsinMadison) for the kind gift of 2-MIC, and J. Beckwith (Harvard University) for plasmid pBAD30.
|
|
|---|
This article has been cited by other articles:
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Copyright © 2009 by the American Society for Microbiology. For an alternate route to Journals.ASM.org, visit: http://intl-journals.asm.org | More Info»