Previous Article | Next Article ![]()
Journal of Bacteriology, September 2003, p. 5491-5499, Vol. 185, No. 18
0021-9193/03/$08.00+0 DOI: 10.1128/JB.185.18.5491-5499.2003
Copyright © 2003, American Society for Microbiology. All Rights Reserved.
Jana Jass
,1,
Elke Maier,2 Roland Benz,2 and Bernt Eric Uhlin1
Department of Molecular Biology, Umeå University, S-901 87 Umeå, Sweden,1 Department of Biotechnology, Biozentrum der Universität Würzburg, 97074 Würzburg, Germany2
Received 26 March 2003/ Accepted 23 June 2003
|
|
|---|
|
|
|---|
-hemolysin and enterohemorrhagic E. coli (EHEC) hemolysin.
-Hemolysin (HlyA) is frequently produced by E. coli strains causing extraintestinal infections such as urinary tract infections, while EHEC hemolysin (Ehx) is found in EHEC strains of serogroup O157 (4, 32). The commonly used nonpathogenic E. coli laboratory strain K-12 contains neither the gene cluster required for the production and secretion of
-hemolysin nor the related EHEC hemolysin determinant and is nonhemolytic under normal laboratory conditions. However, recently it became evident that even derivatives of E. coli K-12 can express a hemolytic or cytolytic phenotype. A protein designated ClyA (for cytolysin A) has been shown to cause lysis of red blood cells from different species, e.g., human, horse, sheep, goat, and hen (23). Expression of ClyA also results in cytotoxicity towards cultured human and murine macrophages, human peripheral monocytes, and HeLa cells (17, 29). Activation of the clyA (hlyE, sheA) gene results in expression of the ClyA protein (10, 18, 20, 21, 29). For example, transcription of the clyA gene is derepressed in hns mutant E. coli (29, 33) and in bacteria carrying multicopy clones of the hlyX, slyA, or mprA gene (13, 18, 20). This results in a hemolytic phenotype on blood agar plates. In most wild-type E. coli strains there is a low level of ClyA protein produced, but it does not give a detectable phenotype (22) The mechanism by which E. coli K-12 may release cytolysin A has not been clarified, and it is not known whether there would be some similarities with HlyA and/or Ehx. The ClyA cytolysin from E. coli is the prototype of what a novel type of pore-forming bacterial cytotoxins found in different enterobacteria (10, 11, 23, 24, 31). Recently, we showed that ClyA proteins from the human-pathogenic Salmonella enterica serovars Typhi and Paratyphi A have pore-forming activity and may be expressed at phenotypically detectable levels (23). The structural features of ClyA appear to be different from those of previously characterized cytolysins, and according to crystallographic studies, it represents a novel protein fold among cytotoxins (31). Earlier studies with overproducing strains suggested that ClyA accumulates in the periplasmic space (18, 21). However, the ClyA protein is made without cleavage of any N-terminal signal sequence, and it has remained unknown how it may reach the periplasm and be exposed on the bacterial cell surface. The C-terminal region was earlier suggested to be of importance for membrane targeting, pore formation, and translocation of ClyA, since mutant bacteria expressed a nonhemolytic phenotype (21). In this work, we have studied the subcellular localization of the wild type and some C-terminally mutant variants of ClyA, and we examined how the mutant proteins cause inhibition of expression of the hemolytic phenotype of wild-type ClyA.
|
|
|---|
|
View this table: [in a new window] |
TABLE 1. Bacterial strains and plasmids used
|
Cell fractionation. The bacteria were harvested by centrifugation. Periplasmic proteins were isolated by osmotic shock as follows. The bacteria from a defined culture volume (suspensions of 1011 cells/ml; usually 1 ml but up to 50 ml in cases of preparations to be used for purification of ClyA) were washed with 10 mM Tris-HCl (pH 8.0) and resuspended in 0.25 volume (compared to the starting volume) of a solution containing 20% sucrose, 20 mM Tris-HCl (pH 8.0), and 1 mM Na-EDTA. The mixture was incubated for 10 min at room temperature. Subsequently, the bacteria were pelleted and resuspended in 1 volume of ice-cold water. After incubation on ice for 10 min, the cells were removed by centrifugation at 12,000 x g. The supernatant was used as the periplasmic protein extract. The cell pellet was then disrupted by sonication in 1 volume of 10 mM Tris-HCl (pH 8.0) buffer. The cell debris and unbroken cells were removed by centrifugation at 5,000 x g for 10 min at 4°C, and the supernatant was fractionated into the membrane and cytoplasmic fractions by centrifugation at 10,000 x g for 30 min at 4°C. The supernatant was used as a cytoplasmic fraction. The sediment was resuspended with sterilized distilled water and was used as the membrane fraction. In order to separate the inner and outer membranes, the fraction was further treated with N-lauryl sarcosyl at a final concentration of 2% at room temperature and then centrifuged at 15,000 x g for 30 min. The resulting sediment was used as the outer membrane fraction, and the supernatant was used as the inner membrane fraction after dialysis and precipitation. Extracellular, periplasmic, cytoplasmic, and membrane-bound proteins were concentrated by precipitation with ice-cold trichloroacetic acid (final concentration, 10%), The precipitated proteins were collected by centrifugation at 12,000 x g, washed with acetone, dried under vacuum, and dissolved in sample buffer (50 mM Tris-HCl [pH 6.8], 10% glycerol, 5% ß-mercaptoethanol, 2% sodium dodecyl sulfate [SDS], 0.05% bromophenol blue). Samples were neutralized by addition of saturated Tris solution and boiled for 5 min at 100°C. SDS-polyacrylamide gel electrophoresis (SDS-PAGE) analyses of proteins were performed as described previously (16). The samples were applied to SDS-PAGE minigels and run at constant voltage (120 V for 17% gels and 100 V for 12.5% gels). Gels were stained with Coomassie blue and/or silver stain or analyzed by Western immunoblot analysis. Silver staining was carried out by using the SilverXpress silver staining kit according to the protocol of the manufacturer (Invitrogen).
Purification of ClyA proteins. ClyA proteins from the periplasmic, cytoplasmic, and membrane fractions were further purified by fast protein liquid chromatography with a Mono Q ion-exchange column (Pharmacia, Uppsala, Sweden). The system was equilibrated with 20 mM Tris-HCl buffer (pH 8.0), and the protein was then eluted with a linear gradient of 0 to 1 M NaCl at a flow rate of 0.5 ml/min (2-ml fractions). The elution of the protein was monitored by measuring the extinction of the fractions at 280 nm. The proteins corresponding to eluted peaks were checked by SDS-PAGE and immunoblot analysis. The fractions containing ClyA protein were dialyzed against 20 mM Tris-HCl (pH 8.0) and stored at -20°C. Quantification of protein concentrations was carried out with the bicinchoninic acid protein assay kit according to the protocol of the manufacturer (Pierce).
Western blot analysis. Cell extracts of E. coli strains were separated by SDS-PAGE and analyzed by immunoblotting with a polyclonal anti-ClyA antiserum (21), monoclonal anti-ClyA antibodies (S. N. Wai and B. E. Uhlin, unpublished data), polyclonal anti-DsbA antiserum (2), or polyclonal anti-H-NS antiserum (15). The separated proteins were transferred to a nitrocellulose filter by methods described earlier (28). Subsequently, the filters were probed with anti-ClyA antibodies. The monoclonal anti-ClyA antibodies were used at a final dilution of 1:5,000 with anti-mouse horseradish peroxidase-conjugated secondary antibody at a final dilution of 1:20,000. Polyclonal anti-ClyA antisera were used at final dilutions of 1:1,000 with biotinylated anti-rabbit secondary antibody and streptavidin-horseradish peroxidase conjugate at final dilutions of 1:1,000 and 1:1,500, respectively. Immunoreactive bands were visualized using the enhanced chemiluminescence Western blotting detection system of Amersham Pharmacia Biotech according to the instructions of the manufacturer.
Assay for cytolytic activity. The cytolytic activities of strains expressing different mutant variants of ClyA were scored phenotypically after growth of the bacteria on blood agar plates as described before (33). For quantitative assessments of hemolytic activity, contact hemolytic assays were performed as previously described (21, 23, 26).
Analysis of single-channel formation in lipid bilayer membranes. Black lipid bilayer membranes were formed as described previously (18). The instrumentation consisted of a Teflon chamber with two aqueous compartments connected by a small circular hole with a surface area of about 0.5 mm2. Membranes were formed across the hole by applying a 1% solution of diphytanoyl phosphatidylcholine (Avanti Polar Lipids, Alabaster, Ala.) in n-decane. The aqueous salt solutions (Merck, Darmstadt, Germany) were used unbuffered and had a pH of around 6. ClyA and its mutants were added from concentrated stock solutions either to the aqueous phase bathing a membrane in the black state or immediately prior to membrane formation. The temperature was kept at 25°C throughout. The membrane current was measured with a pair of Ag-AgCl electrodes switched in series with a voltage source and an electrometer. For the single-channel recordings, the electrometer was replaced by a homemade current amplifier. The amplified signal was monitored with a storage oscilloscope and recorded with a tape or a strip chart recorder.
Lipid monolayer crystallization of ClyA. Purified wild-type and mutant ClyA proteins were crystallized into two-dimensional structures on planar lipid monolayer films by using a procedure described earlier (6). A brief description with specific details is given here. Crystallization was carried out in wells (1 mm high and 4 mm in diameter) made in a Teflon disk. The Teflon disks were stringently cleaned in 2% Hellmanex II for 1.5 h, after which they were rinsed with tap water for 1 h and with deionized water before excess water was removed. Approximately 18 µl of the purified wild-type or mutant ClyA proteins (30 µg/ml in 20 mM Tris-HCl buffer, pH 7.4) was placed in each well so that a meniscus was formed. In some experiments the wild-type and mutant ClyA protein were added together at a 1:1 ratio. A 75% 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine-25% cholesterol mixture was diluted to 0.6 mM in chloroform, and 15 µl was placed on top of the protein solution meniscus. The preparation was incubated at room temperature for 3 days in a humidity chamber. The lipid-protein complexes were collected onto carbon-backed copper grids and immediately stained with 2% sodium phosphotungstate. The ClyA cytolysin assemblies were imaged under a JEOL 100B electron microscope.
|
|
|---|
![]() View larger version (50K): [in a new window] |
FIG. 1. Subcellular localization of ClyA proteins. (A) Immunoblot analysis of ClyA proteins in periplasmic (P), cytoplasmic (C), and membrane (M) fractions from different derivatives of E. coli K-12 expressing wild-type or mutant alleles of the clyA gene. Lanes 1 to 3, strain MC1061/pYMZ80. Lanes 4 to 6, strain MWK11. Lanes 7 to 9, strain YMZ19. Lanes 10 to 12, strain MC1061/pSNW168. Lanes 13 to 15, strain MC1061/pJON63. Lanes 16 to 18, strain MC1061/pMWK16. Lanes 19 to 21, strain BEU616. The relevant characteristics of the strains (ClyA phenotype or mutation and plasmids encoding clyA variants) are shown below the lanes. For immunodetection, a mouse monoclonal antibody was used, as described in Materials and Methods. (B) Immunoblot analysis of the periplasmic and cytoplasmic marker proteins DsbA and H-NS, respectively. Subcellular fractions of strains MC1061/pYMZ80 (lanes 1 to 3), MWK11 (lanes 4 to 6), and MC1061/pJON63 (lanes 7 to 9) were subjected to analysis with anti-DsbA and anti-H-NS rabbit antisera. (C) SDS-PAGE analysis and Coomassie blue staining of proteins in periplasmic (P), inner membrane (IM), outer membrane (OM), and total membrane (M) fractions of strains DH5 /pSNW168 (lanes 2 to 5), BEU616/pJON66 (lanes 6 to 9), and BEU616/pJON70 (lanes 10 to 13). Molecular size markers were included in lane 1, and the sizes are indicated on the left.
|
|
View this table: [in a new window] |
TABLE 2. ClyA subcellular protein localization and cytolytic expression
|
(183-186) variant was discovered in a strain from the ECOR (E. coli reference) collection (19). The protein expressed from this clyA allele (plasmid pMWK16) gave a nonhemolytic ClyA phenotype, and it was found primarily in the cytoplasmic fraction and at only a low level in the periplasm (Fig. 1A, lanes 16 to 18). The results from the analysis of subcellular localization correlated well with the degree of cytolytic activity as monitored by phenotypic tests (Table 2).
Effects of mutants altered in the ClyA C-terminal domain on phenotypic expression of the wild-type protein.
We decided to test whether mutant ClyA variants would affect the activity or localization of the wild-type protein if it also was expressed in the same bacterial cells. Therefore, a number of mutant clyA alleles cloned on plasmids were introduced into the ClyA-expressing strains MWK11 and BEU616, which carry the wild-type gene on the chromosome. There were clear effects on the phenotypes of the strains expressing both wild-type and mutant ClyA. Some of the mutants inhibited expression of the hemolytic phenotype of strains BEU616 and MWK11 (Table 2). The in-frame deletion variant pMWK16 (
183-186) and the C-terminal deletion constructs pJON63, pJON66, and pSNW168 displayed a clear inhibiting effect on the hemolytic phenotype, and the construct pJON70 (A183D G184D) showed a partial effect.
In vitro activities of wild-type and mutant ClyA.
We performed in vitro studies with purified proteins in order to test whether the observed effect of the mutant ClyA proteins could directly affect the cytolytic activity of the wild-type protein. For this purpose, we purified the wild-type ClyA and the A183G G184D,
(183-186), and
(281-303) mutant proteins, expressed by the clones pYMZ80, pJON70, pMWK16, and pSNW168, respectively. The cytolytic activity was monitored in a hemolysis assay with red blood cells. While the wild-type ClyA showed a clear hemolytic activity, the three mutant proteins showed very low activity in the assay, with levels only about 5 to 10% of the wild-type level (Table 3). The mutant proteins also displayed an inhibiting effect on the activity of the wild-type protein in this in vitro assay. When wild-type ClyA was mixed with an equal amount of the mutant proteins prior to the addition to the red blood cells, the activity was largely diminished; only about 10 to 20% of the activity remained (Table 3). Addition of smaller amounts of the mutant protein resulted in a less reduced level of activity; there was about 40% activity remaining when a 10-fold-lower concentration of mutant protein was included. These results provided additional evidence that the wild-type and mutant proteins could interact directly and that such interactions affected the function of wild-type ClyA.
|
View this table: [in a new window] |
TABLE 3. In vitro analysis of ClyA protein activity
|
(183-186) and
(281-303) ClyA mutants had a very low hemolytic activity in comparison with wild-type ClyA. Measurements were performed with lipid bilayer membranes to check whether the ClyA mutants were able to form ion-permeable channels. The results were compared with the channels formed by wild-type ClyA. Figure 2 shows the results of single-channel conductance experiments with wild-type ClyA (Fig. 2A), the
(183-186) mutant (Fig. 2B), and the
(281-303) mutant (Fig. 2C) in 1 M KCl. The single-channel conductance is a measure of channel size. The somewhat smaller conductance of the mutant channels suggested that both mutants formed channels with a somewhat smaller size than the wild-type ClyA channel. The results also indicated that the mutants formed relatively stable channels with a lifetime similar to that observed previously with wild-type ClyA (18). Wild-type ClyA had the highest single-channel conductance under these experimental conditions, followed by the
(183-186) and
(281-303) mutants.
![]() View larger version (5K): [in a new window] |
FIG. 2. Single-channel recordings of diphytanoyl phosphatidylcholine-n-decane membranes in the presence of wild-type ClyA (trace A) and the (183-186) (trace B) and (281-303) (trace C) ClyA mutants. The aqueous phase contained 1 M KCl (pH 6) and 10 ng of ClyA wild-type or mutant protein per ml. The applied membrane potential was 20 mV (20°C). Note that the current noise for the single-channel recording of wild-type ClyA is similar to that for the mutants, indicating that the mutation did not induce a major change of the channel structure.
|
(183-186) and
(281-303) mutants.
![]() View larger version (17K): [in a new window] |
FIG. 3. Histogram of the probability P(G) for the occurrence of a given conductivity unit observed with membranes formed from diphytanoyl phosphatidylcholine-n-decane in the presence of 10 ng of wild-type ClyA (A) and the (183-186) (B) and (281-303) (C) mutants per ml. P(G) is the probability that a given conductance increment G is observed in the single-channel experiments. It was calculated by dividing the number of fluctuations with a given conductance increment by the total number of conductance fluctuations. The aqueous phase contained 1 M KCl. The applied membrane potential was 20 mV (20°C). The average single-channel conductances were 12 nS for 237 single-channel events (wild-type ClyA), 8.5 nS for 95 events [ClyA (183-186) mutant], and 7.5 nS for 181 events [ClyA (281-303) mutant]. Conductance is current divided by voltage.
|
(183-186) and
(281-303) ClyA mutants compared to that of wild-type ClyA. They accounted only for about 10% [
(183-186) mutant] and about 3% [
(281-303) mutant] compared to the wild type (100%). These values were in good agreement with the relative pore-forming activities determined by use of the hemolysis assay (Table 3).
![]() View larger version (18K): [in a new window] |
FIG. 4. Relative conductance caused by the ClyA (183-186) and ClyA (281-303) mutants in lipid bilayer membranes compared to wild-type ClyA (wt). Membranes were formed from diphytanoyl phosphatidylcholine-n-decane in 1 M KCl, and ClyA proteins were added at a concentration of 100 ng/ml to the aqueous phase. About 30 min after addition of ClyA proteins, the membrane conductance was measured and averaged for three membranes for the individual systems [wild-type ClyA, ClyA (183-186) mutant, and ClyA (281-303) mutant]. The membrane conductance of wild-type ClyA was set to 100%, and the conductances of the two ClyA mutants were calculated relative to that of wild-type ClyA. The membrane activity is given as the mean value ± standard deviation. T = 20°C; Vm = 20 mV.
|
(281-303) mutant protein did not result in any recognizable pore assemblies under these conditions (Fig. 5B). There were some pore assemblies found in the case of the ClyA
(183-186) mutant protein, but most of the protein seemed to be forming partial assemblies or altered structures (Fig. 5C). When the wild-type ClyA was mixed with an equal amount of mutant proteins, there were clear indications that the wild-type ClyA was impaired in its formation of pore assemblies (Fig. 5D to F). In particular, in the presence of the ClyA
(281-303) mutant protein there were mostly partial assemblies, and only a few complete pore structures typical of wild-type ClyA were observed (Fig. 5D [c.f. with Fig. 5A]). Similarly, the pore assembly formation by the wild-type ClyA protein was impaired when it was mixed with the ClyA
(183-186) mutant protein (Fig. 5E) or the ClyA (A183G G184D) mutant protein (Fig. 5F). The findings were in keeping with the above-described results and supported the conclusion that the mutant and wild-type ClyA proteins interacted and formed different complexes with altered cytolytic and pore-forming properties in comparison with those of the wild type.
![]() View larger version (128K): [in a new window] |
FIG. 5. Electron microscope images of formation of ClyA pore assemblies on planar lipid monolayer films. Purified wild-type and mutant ClyA proteins were allowed to assemble by the lipid monolayer crystallization method as described in Materials and Methods. Bars, 25 nm. (A) Wild-type ClyA protein. (B) ClyA (281-303) mutant protein. (C) ClyA (183-186) mutant protein. (D) Wild-type and ClyA (281-303) mutant proteins in a 1:1 ratio. (E) Wild-type and ClyA (183-186) mutant proteins in a 1:1 ratio. (F) Wild-type and ClyA (A183G G184D) mutant proteins in a 1:1 ratio.
|
|
|
|---|
(281-303) protein was impaired in its translocation and was retained in the inner membrane. Furthermore, the mutant protein displayed a dominant negative effect on the wild-type ClyA protein. The C-terminal region was earlier suggested to be of importance for membrane targeting, pore formation, and translocation of ClyA, since mutant bacteria expressed a nonhemolytic phenotype (3, 21). According to the structural model based on X-ray crystallography, the C-terminal region includes a helix structure that is part of a tail domain in the folded protein and that may be somewhat mobile in relation to the rest of the protein (3, 31). How the lack of the C-terminal region might affect the overall structure of ClyA in the cell is not known, but we must consider that, e.g., the folding of the mutant
(281-303) protein could be quite different from that of the wild type. It was somewhat puzzling why ClyA with a 11-amino-acid deletion localized mainly to the cytoplasm whereas ClyA with a 23-amino-acid deletion localized to the membrane. However, it should be noted that there is also a substitution (H292D) in the former case, and it is feasible that the defective localization of ClyA expressed by pJON63 could be due to the substitution mutation rather than the deletion.
The naturally occurring ClyA variant lacking four amino acids in a hydrophobic region in the middle of the protein [
(183-186) mutant] retained the ability to be translocated to the periplasm although it had lost much of the pore-forming activity. It also displayed a dominant negative effect on wild-type ClyA.
Studies in vitro with purified proteins provided evidence that suggested an interaction between the wild-type and mutant ClyA proteins and that the activity of the wild-type polypeptide was affected negatively by the interaction (Table 3). The mutant proteins showed a low pore-forming activity as judged by the hemolysis assay with erythrocytes. Measurements of the single-channel conductance in the lipid bilayer membrane system showed that the mutant ClyA proteins retained some ability to form channels, albeit less well than the wild type. The results from electron microscopic studies of ClyA proteins assembled on planar lipid films by the lipid monolayer crystallization method fully supported the conclusion that mutant and wild-type ClyA proteins formed different complexes with altered cytolytic and pore-forming properties in comparison with those of the wild type.
The dominant negative phenotype of the ClyA mutants can therefore be explained as a consequence of the formation of dysfunctional mixed oligomers, comprised of both mutant and wild-type monomeric components. When the proteins are coexpressed in vivo, the formation of intracellular hetero-oligomers might interfere with the pool of monomeric wild-type ClyA. Such interference can presumably occur in either of the intracellular compartments where the mutant proteins primarily were found. Interestingly, a similar situation with formation of mixed oligomers was suggested as the more likely explanation for the dominant negative phenotype exerted by a mutant variant of the Helicobacter pylori VacA cytotoxin as well (30). In that case, the mutant protein retained the ability to be secreted from the bacteria and formed oligomeric complexes similar to those of the wild-type VacA. The ClyA
(281-303) mutant protein appeared to have lost the ability to form normal oligomeric complexes, and it clearly affected the ability of wild-type ClyA in its oligomerization in vitro (Fig. 5).
The ClyA protein is evidently not subject to any signal sequence cleavage, and there is no evidence of any other posttranslational modification (10, 21, 31). It remains to be elucidated whether the translocation of ClyA involves any accessory component(s) of some specific transport system. If so, the mutant proteins could possibly also affect the translocation of wild-type ClyA by competing for binding to such components of the transport system. In the case of the outer membrane lipoprotein XpsD of Xanthomonas campestris pv. Campestris, it was suggested that a particular mutant form of the protein could interfere with the secretion of the wild-type protein by competing for some other factor(s) (9). The wild-type XpsD protein forms a multimeric complex, and it was also shown that certain other mutant XpsD proteins caused secretion interference primarily by forming mixed nonfunctional multimers with the wild-type proteins (9). The ClyA protein represents a new type of cytolysin in enterobacteria with a novel protein fold according to the structural analysis (31). The dominantly negative ClyA mutants characterized in the present work should aid in further molecular analysis of the mechanisms by which this novel type of cytotoxin forms multimeric assemblies and how it is secreted by bacterial cells.
This work was supported by grants from the Swedish Research Council. S.N.W. was supported in part by a Visiting Scientist Fellowship from the Wenner-Gren Foundations, and J.O. was supported by a Research Associate Fellowship from the Faculty of Medicine and Odontology at Umeå University.
Present address: Microbiology and Tumor Biology Center, Karolinska Institute, S-17177 Stockholm, Sweden. ![]()
Present address: The Lawson Health Research Institute, London, Ontario, Canada. ![]()
|
|
|---|
This article has been cited by other articles:
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Copyright © 2009 by the American Society for Microbiology. For an alternate route to Journals.ASM.org, visit: http://intl-journals.asm.org | More Info»