Previous Article | Next Article ![]()
Journal of Bacteriology, October 2003, p. 5765-5771, Vol. 185, No. 19
0021-9193/03/$08.00+0 DOI: 10.1128/JB.185.19.5765-5771.2003
Copyright © 2003, American Society for Microbiology. All Rights Reserved.
and Edward E. Ishiguro*
Department of Biochemistry and Microbiology, University of Victoria, Victoria, British Columbia, Canada V8W 3P6
Received 27 May 2003/ Accepted 17 July 2003
|
|
|---|
|
|
|---|
The accumulation of ppGpp also occurs in a RelA-independent fashion, for example, during carbon source downshift (1). This reaction is catalyzed by ppGpp synthetase II, the product of the spoT gene (8, 30). SpoT also exhibits a 3'-pyrophosphatase activity that is the primary mechanism for ppGpp degradation during recovery from starvation (22).
Mutations affecting ppGpp metabolism result in pleiotropic phenotypes, suggesting that this nucleotide plays a complex role in cellular physiology (1). One relevant example is the so-called (p)ppGpp0 mutants that carry deletions in both relA and spoT (30). These (p)ppGpp-deficient mutants have nearly normal growth rates on complex media but exhibit a multiple amino acid auxotrophic phenotype on minimal medium. We report here a new phenotype associated with relA mutations. We demonstrate that relA mutants exhibit temperature-sensitive growth. This temperature sensitivity was correlated to significantly decreased levels of thermotolerance. The temperature sensitivity was suppressed by certain mutant alleles of rpoB, the gene encoding the ß subunit of RNA polymerase, by mutations in spoT that result in increased basal ppGpp levels, and by high osmolarity.
|
|
|---|
|
View this table: [in a new window] |
TABLE 1. Bacterial strains and plasmids used in this study
|
It should be noted that Pao and Gallant (18) have characterized a mutation in a gene they designated relX that decreased intracellular levels of ppGpp and caused temperature-sensitive growth. We deliberately chose the zei-348::Tn5 marker for the construction of relA mutants to minimize the possibility of picking up relX mutations from our donor strains. The zei-348::Tn5 marker is closely linked to cysC and is therefore more closely linked to relA than to relX. In retrospect, we were unable to demonstrate relX in our strains (unpublished data).
Derivatives of VC6129 carrying the various rpoB alleles were constructed by using the linked btuB::Tn10 insertion as a selective marker. All of the mutant rpoB alleles conferred resistance to rifampin, and this property was used to identify the rpoB transductants.
Derivatives of strain VC6141 carrying spoT202, spoT203, and spoT204 were constructed essentially as described by Sarubbi et al. (21). Briefly, the procedure was as follows. In the first step, the linked markers pyrE60 and zib-563::Tn10 were cotransduced from CF5034 into VC6141 by selection for tetracycline resistance to create strain VC7238. Strain VC7237 was a tetracycline-resistant transductant that did not coinherit pyrE60. In the second step, the various spoT alleles from pyrE+ donors were transduced into VC7238 and pyrE+ transductants were selected for. The spoT derivatives were obtained by screening the pyrE+ transductants that formed small colonies in the presence of tetracycline (M. Cashel, personal communication).
Media and growth conditions. Bacteria were routinely grown in nutrient broth or nutrient agar (Difco) unless indicated otherwise. Other media used during the course of this study were M9 minimal medium (16), Davis minimal medium (Difco), Luria broth or agar as described by Miller (Difco), tryptic soy agar (Difco), LB broth or agar as described by Lennox (Difco), and LB broth or agar as described by Miller (Difco). Broth cultures were grown in Gyrotory water bath shakers (New Brunswick Scientific Co.), and culture turbidity was measured with a Beckman DU-64 spectrophotometer at 600 nm. The effect of the incubation temperature on colony formation is expressed as plating efficiency, which, in most experiments, is defined as the ratio of colony formation at 42°C to colony formation at 30°C, as determined in the following way. Bacteria were serially diluted in sterile saline (0.015 M NaCl). For each dilution, aliquots of 100 µl were plated in quadruplicate on nutrient agar, and two plates for each dilution were incubated at 30°C and at 42°C for 36 h before counting. In Fig. 1, a full range of temperatures was used, and in this case, the plating efficiencies are defined as the ratio of the colony count at the higher temperature to the colony count at 30°C. The experiments described in this report were performed with exponential-phase as well as stationary-phase bacteria. It is noteworthy that the same results were obtained in all cases, and the growth phase apparently did not influence the temperature sensitivity of the relA mutants. Unless indicated otherwise, the data shown were obtained with bacterial cultures that were 1 to 2 h into stationary phase.
![]() View larger version (57K): [in a new window] |
FIG. 1. Temperature-sensitive growth of relA mutants. A set of isogenic strains carrying three common relA mutant alleles were constructed. These strains were compared for growth on nutrient agar at temperatures ranging from 30 to 43°C. Growth is expressed as plating efficiency (plate counts at the high temperature divided by plate counts at 30°C). a, strain VC6132 (wild type); b, strain VC6129 ( relA251::kan); c, strain VC6130 ( relA251::kan spoT207::cat); d, strain VC6133 (relA2); e, strain VC6141 (relA1).
|
|
|
|---|
relA251::kan
spoT207::cat), CP79 (relA2), and MC4100 (relA1) all failed to produce colonies on nutrient agar at 42°C. A more extensive survey of our culture collection revealed that temperature-sensitive growth is a common phenotype associated with all of the relA mutants tested. To establish the relationship between mutations in relA and temperature sensitivity, a set of isogenic derivatives of strain W3110 carrying the relA1, relA2, and
relA251::kan alleles were constructed by phage P1-mediated transduction (Table 1). Figure 1 compares the plating efficiencies of these strains with the plating efficiency of an isogenic relA+ strain, VC6132, on nutrient agar as a function of incubation temperature. All of the relA mutants had nearly normal plating efficiencies at temperatures as high as 39 to 40°C, but they progressively lost colony-forming capabilities at higher temperatures. Temperature sensitivity was especially notable in strain VC6129 (
relA251::kan) and in a derivative of VC6129, strain VC6130, carrying the
spoT207::cat allele (Fig. 1, strains b and c, respectively). Both strains exhibited temperature-sensitive growth at 40°C and higher temperatures. In comparison, strains VC6133 and VC6141, which carry the relA1 and relA2 alleles, respectively, showed normal colony formation at 40°C but were sensitive to higher temperatures (Fig. 1, strains d and e, respectively). Additional comparative studies indicated that the plating efficiencies of strains carrying the relA1 and relA2 alleles, such as VC61333 and VC6141 (Fig. 1, strains d and e, respectively), were consistently more than 10-fold higher than those of strains carrying the
relA251::kan allele. Although the plating efficiencies of strains VC6129 and VC6130 were roughly similar in these experiments, data presented below indicate that VC6130 was less thermotolerant than VC6129. This suggests that the
spoT207::cat allele exacerbated the temperature-sensitive phenotype associated with
relA251::kan. Temperature sensitivity was also demonstrated in nutrient broth. As shown in Fig. 2A, all of the strains grew at 30°C, with doubling times ranging from 110 to 114 min. On the other hand, only the wild-type strain, VC6132, grew at 42°C (Fig. 2B). Cultures of the relA mutants, VC6129, VC6133, and VC6141, stopped growing after less than two doublings at the restrictive temperature.
![]() View larger version (18K): [in a new window] |
FIG. 2. Growth in nutrient broth at 30°C (A) and at 42°C (B). Symbols: , strain VC6132 (wild type); , strain VC6129 ( relA251::kan); , strain VC6133 (relA2); , strain VC6141 (relA1). In panel B, cultures growing at 30°C were shifted to 42°C at 1.5 h (arrow). For comparison, the growth of a culture of strain VC6132 (wild type) at 30°C ( ) is also shown.
|
Osmoremediation of relA-mediated temperature-sensitive growth. As noted above, the relA-associated temperature sensitivity was dependent on the growth medium. We have routinely used nutrient agar or broth for most of our experiments. However, the temperature-sensitive phenotype of relA mutants could also be demonstrated on minimal media such as M9 and Davis minimal media (supplemented with a mixture of amino acids in the case of strain VC6130). All relA mutant strains were heat resistant on most common complex media, such as tryptic soy medium. Moreover, it is noteworthy that Luria broth or agar and the various formulations of Luria-Bertani medium supported colony formation of relA mutants at 42°C.
The observed medium dependence probably reflected the osmolarity of the growth medium because the relA-associated temperature-sensitive phenotype was osmoremedial. The ability of relA mutants to form colonies on nutrient agar or on Davis minimal agar at temperatures as high as 43°C was restored by the addition of NaCl (0.3 M), KCl (0.1 M), or sucrose (0.35 M) to the medium. Figure 3 shows the effects of adding different concentrations of NaCl to nutrient agar on the plating efficiency of strain VC6129. A final concentration of 0.3 to 0.8 M NaCl completely abolished temperature sensitivity at 42°C. A similar experiment with KCl showed that it was an effective suppressor of temperature sensitivity at 0.1 to 0.3 M (data not shown).
![]() View larger version (17K): [in a new window] |
FIG. 3. Effect of medium osmolarity on colony formation by strain VC6129 ( relA251::kan). Nutrient agar plates containing the indicated amounts of NaCl were inoculated with a series of dilutions of an exponential-phase culture of strain VC6129. Duplicate sets of plates were prepared for each salt concentration, with one set incubated at 30°C and the other incubated at 42°C. Colonies were counted after 36 h of incubation, and plating efficiencies (colony count at 42°C divided by colony count at 30°C) were calculated for each salt concentration.
|
relA251::kan
spoT207::cat), possess pleiotropic phenotypes. For example, they are multiauxotrophic on minimal medium (30). This multiauxotrophic phenotype is suppressed by certain mutant alleles of rpoB (1). A representative collection of rpoB alleles were transduced into VC6129 to determine whether they also suppress the relA-associated temperature sensitivity. As shown in Table 2, four of the seven rpoB alleles tested restored heat resistance. Identical results were obtained with derivatives of VC6130 carrying these rpoB alleles (data not shown). Interestingly, these same four alleles were the only ones in the collection capable of suppressing the (p)ppGpp0-associated multiauxotrophic phenotype (M. Cashel, personal communication), suggesting that this phenomenon is mechanistically related to relA-associated temperature sensitivity. |
View this table: [in a new window] |
TABLE 2. Suppression of thermosensitive phenotype of strain VC6129 ( relA251::kan) mutants by mutations in rpoB gene
|
|
View this table: [in a new window] |
TABLE 3. Suppression of relA1-mediated temperature sensitivity by spoT mutant alleles
|
![]() View larger version (14K): [in a new window] |
FIG. 4. Killing of strain VC6129 ( relA251::kan) at 42°C. Identical sets of plates inoculated with serial dilutions of strain VC6129 were incubated at 42°C beginning at 0 h. At the indicated times, sets of plates were removed and incubated further at 30°C to determine the number of survivors of the 42°C treatment.
|
relA251::kan allele were compared for survival at 55°C. Figure 5 shows that relA251::kan mutant strain VC6129 was significantly less thermotolerant than relA+ strain VC6132. Thermotolerance was restored to nearly wild-type levels by the introduction of plasmid pALS10 (relA+) into strain VC6129. Moreover, strain VC6130 was killed at a faster rate at 55°C than strain VC6129, indicating that the presence of the spoT207::cat mutation further reduced the thermotolerance associated with the relA251::kan allele. Derivatives of strain VC6129 carrying rpoB suppressor mutations, e.g., strain VC6158 with rpoB3449, were significantly more thermoresistant, although their levels of thermoresistance were still not restored to the wild-type level. Collectively, the results described here suggest that the relA-associated temperature-sensitive growth phenotype was associated with decreased thermotolerance. The results shown in Fig. 5 were obtained with exponential-phase cells. Virtually identical results were obtained when stationary-phase bacteria were used. Moreover, the thermotolerance of strain VC6129 (
relA251::kan) was not improved by cell growth at 37°C or by a brief (30-min) preexposure of the cells to 42°C prior to testing (data not shown).
![]() View larger version (19K): [in a new window] |
FIG. 5. Decreased thermotolerance conferred by relA mutation. Suspensions of bacteria in saline were incubated at 55°C. At the indicated times, samples were removed and the numbers of survivors were determined. Symbols: , strain VC6132 (wild type); , strain VC6129 ( relA251::kan); , strain VC6129 carrying plasmid pALS10 (relA+); , strain VC6130 ( relA251::kan spoT207::cat); , strain VC6158 ( relA251::kan rpoB3449).
|
|
|
|---|
relA251::kan strain was significantly more temperature sensitive than strains carrying the relA1 and relA2 alleles, and this may reflect the leakiness of the latter mutant alleles. Furthermore, the temperature sensitivity of the
relA251::kan strain was exacerbated by the introduction of the
spoT207::cat mutation. Collectively, these results indicate that the observed temperature sensitivity was directly attributable to decreased intracellular levels of (p)ppGpp.
The temperature-sensitive phenotypes of the relA mutant strains were osmoremedial and were only evident in media of low osmotic strength. The osmolarities of most common media, e.g., the various formulations of LB, were adequate to support growth at high temperature. The relA-mediated temperature sensitivity was suppressed by increasing the osmolarity of nonpermissive growth media with a variety of solutes, e.g., NaCl, KCl, or sucrose. Osmoremedial temperature-sensitive mutations are apparently quite common, but how the increase in external osmolarity suppresses the mutant phenotypes is far from understood (3). In some instances, it has been proposed that the resulting increase in the intracellular concentration of a compatible solute could lead to the stabilization of a temperature-sensitive mutant protein (3). This is an unlikely explanation for the relA-mediated temperature sensitivity. For example, strains carrying the
relA251::kan mutation did not produce RelA but still exhibited an osmoremedial temperature-sensitive phenotype. Therefore, as an alternative, we are investigating the possibility that the osmoremedial characteristic may instead be related to some aspect of osmoregulated gene expression.
The relA-mediated temperature sensitivity was suppressed by four of the seven rpoB mutant alleles tested. The alleles used in this study have been systematically characterized and shown to possess altered transcriptional termination activities (11, 12). The connection between mutations in rpoB and ppGpp-dependent phenomena is well documented. The four rpoB alleles that suppress relA-mediated temperature sensitivity were previously shown to suppress the multiauxotrophic phenotypes of ppGpp-deficient mutants (1; M. Cashel, personal communication). These same alleles also enhanced the survival of ppGpp-deficient strains during prolonged stationary phase (1). Mutations in rpoB have also been reported to suppress the sensitivity of relA mutants to serine, methionine, and glycine (25, 26) and have been shown relieve the growth-inhibitory effects of high levels of ppGpp (24). The multiauxotrophic phenotype of ppGpp-deficient mutants is corrected not only by the aforementioned rpoB alleles but also by certain mutations in rpoC and rpoD, the genes encoding the ß' and
70 subunits of RNA polymerase, respectively (1, 9). It is intriguing that seemingly distinct phenomena, e.g., multiauxotrophy and temperature sensitivity, are suppressed by common mechanisms, i.e., mutations in RNA polymerase. These findings suggest that these ppGpp-dependent phenomena may have a transcriptional basis, and it would be interesting to consider the possibility that they have the same underlying basis.
Evidence for the direct and specific binding of ppGpp to the ß subunit of RNA polymerase has been presented (2, 19). The in vitro activities of RNA polymerase, to which azido-ppGpp had been cross-linked, were compared on stringent and nonstringent promoters (2). The transcription of ribosomal genes was inhibited by azido-ppGpp, whereas transcription from the lacUV5 promoter was unaffected. It will therefore be of interest to determine whether there is a relationship between these findings and ppGpp-dependent phenomena such as multiauxotrophy and thermotolerance.
We have considered the possibility that ppGpp is required for the expression of genes that are necessary for thermotolerance, and an obvious possibility was the involvement of those encoding heat shock proteins. The heat shock response is dependent on the concentration of
32, and heat shock protein synthesis can even be induced in the absence of heat shock when
32 is overproduced (5). We have shown that the overproduction of
32 from plasmid pDS1 did not relieve the relA-mediated temperature sensitivity (data not shown). However, in retrospect, this is perhaps not surprising since VanBogelen et al. (27) have shown that induction of the heat shock regulon by induction of
32 overproduction at 28°C is, for unknown reasons, insufficient to confer thermotolerance. More importantly, we did not detect any differences in gene expression patterns by DNA microarray technology in relA+ and relA mutant bacteria during heat shock induction, suggesting that the heat shock response is functional in relA mutant strains (X. Yang and E. E. Ishiguro, unpublished data). This confirms the unpublished data of A. D. Grossman (cited in reference 6). Moreover, VanBogelen and Neidhardt (29) have demonstrated that strain CF1946, a W3110 derivative carrying
relA251::kan
spoT207::cat, exhibited a heat shock response, albeit an altered one. They observed that strain CF1946 normally had a higher basal level of several heat shock proteins when it was grown at 30°C. The heat shock regulon was induced when CF1946 was subjected to a temperature upshift to 42°C, but this induction occurred 10 min later than that observed in wild-type strain W3110. It is interesting that VanBogelen and Neidhardt (29) also observed in this experiment that CF1946 was temperature sensitive and failed to grow at 42°C, but no attempt was made to correlate the temperature sensitivity to the
relA251::kan and
spoT207::cat mutations. It has been previously noted that temperature upshifts result in the accumulation of ppGpp (18, 28), but VanBogelen and Neidhardt (29) concluded from their results that ppGpp was neither sufficient nor necessary for induction of the heat shock regulon. In an earlier study, Grossman et al. (6) demonstrated that the expression of heat shock proteins was induced during the stringent response. In their experiments, a temperature-sensitive valyl-tRNA synthetase mutant was shifted from 28 to 33.5°C, a semipermissive temperature at which protein synthesis was inhibited by about 50% with the concomitant increase in ppGpp levels. The induction of heat shock protein synthesis under these conditions was relA+ dependent and did not occur in an isogenic relA mutant strain. Curiously, heat shock protein synthesis during the stringent response also occurred in an rpoH mutant strain. In contrast, subsequent studies by VanBogelen et al. (28) indicated that the heat shock response was not induced when the stringent response was invoked by isoleucine deprivation. Therefore, it is not clear what role, if any, ppGpp plays in induction of the heat shock response. Nevertheless, we conclude from our studies that the expression of heat shock proteins is not sufficient to relieve the temperature sensitivity exhibited by relA mutant strains.
The rpoS gene encodes the
s transcription factor that is required for the expression of stationary phase-induced and osmoregulated genes in E. coli (7, 15). Gentry et al. (4) have shown that ppGpp is required for expression of the rpoS gene. Moreover, Kvint et al. (13, 14) have demonstrated that ppGpp is required for expression of RpoS-dependent genes in addition to
s. Because of the connection to ppGpp and, possibly, to osmoregulated gene expression, it was possible that the temperature sensitivity of the relA mutants could be attributable to their inability to express a key RpoS-dependent gene required for thermotolerance. However, strain UM122, which carries an insertion-inactivated rpoS gene (17), is not temperature sensitive (E. E. Ishiguro, unpublished data). Therefore, it seems unlikely that RpoS is involved in the relA-mediated temperature-sensitive phenotype.
In summary, the basis for relA-dependent thermotolerance appears to be complex. The suppression of temperature sensitivity in relA mutants by certain rpoB alleles suggests the involvement of an unknown aspect of gene expression. This characteristic is common to other relA-dependent phenotypes, and the relationship between relA and RNA polymerase must be elucidated in order to gain a better understanding of relA-dependent thermotolerance.
This work was supported by a grant from the Natural Sciences and Engineering Research Council of Canada.
Present address: Department of Genetics, Yale University, New Haven, CT 6510-3206. ![]()
|
|
|---|
S is positively regulated by ppGpp. J. Bacteriol. 175:7982-7989.
s. J. Biol. Chem. 275:14795-14798.
This article has been cited by other articles:
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Copyright © 2009 by the American Society for Microbiology. For an alternate route to Journals.ASM.org, visit: http://intl-journals.asm.org | More Info»