Previous Article | Next Article ![]()
Journal of Bacteriology, November 2003, p. 6448-6455, Vol. 185, No. 21
0021-9193/03/$08.00+0 DOI: 10.1128/JB.185.21.6448-6455.2003
Copyright © 2003, American Society for Microbiology. All Rights Reserved.
Department of Biochemistry, School of Pharmacy, University of Barcelona, E-08028 Barcelona, Spain
Received 4 June 2003/ Accepted 29 July 2003
|
|
|---|
|
|
|---|
The 2-hydroxymonocarboxylic acids L-lactate, D-lactate, and glycolate share the transporters encoded by two genes, lldP of the lactate operon and glcA of the glycolate operon (21). Both transporters accumulate their substrates against a concentration gradient driven by a proton motive force. Due to the functional similarity between these permeases, GlcA has been included in the LldP family of membrane carriers (24). The amino acid sequences of LldP and GlcA exhibit 65% identity and 80% similarity. Nonetheless, LldP is more effective in accumulating L-lactate, whereas GlcA is more effective in accumulating glycolate (20). Acetate, a two-carbon monocarboxylate, is not recognized by either of these permeases. Thus, during evolution the basic mechanisms of recognition seem to have been retained for the hydroxyl and carboxyl groups, even though L-lactate and D-lactate are three-carbon compounds and glycolate is a two-carbon compound.
The overlapping specificity of LldP and GlcA explains why a glycolate or L-lactate entry-negative phenotype requires inactivation of both transporters (21). In this study we analyzed the appearance in an lldP glcA double mutant of another transport system for the two-carbon carboxylate glycolate, which is also able to transport acetate. This transporter was identified as an acetate carrier encoded by a gene cotranscribed with the acs gene involved in acetate metabolism.
|
|
|---|
|
View this table: [in a new window] |
TABLE 1. Bacterial strains and plasmids used in this study
|
Transport and enzyme assays. For transport assays, the cells were collected at the end of the exponential phase, washed twice, suspended in minimal medium (3) to a final density of 0.5 mg (dry weight)/ml, and placed at 25°C (20). The rate of uptake was assayed by diluting a radioactive substrate 10-fold with the cell suspension to a final concentration of 20 µM. The radioactive substrates assayed were [1,2-14C]glycolate (50 mCi/mmol) purchased from ICN and [1,2-14C]acetate (57 mCi/mmol) purchased from Amersham. Samples (100 µl) were taken at different intervals and filtered through 0.45-µm-pore-size cellulose nitrate filters. The filters were washed with 5 ml of minimal medium, placed in plastic vials, and counted with a scintillator in the presence of Emulsifier-safe (Packard, Meriden, Conn.). To identify competitors, the assays were performed in the presence of 50-fold excesses of unlabeled candidate compounds.
To analyze the effect of sodium on acetate transport, cells were collected, washed up to three times with potassium phosphate buffer (pH 7.0) containing 10 mM MgCl2, and suspended in the same buffer at a final cell density of 0.5 mg (dry weight)/ml. In this case, the cold acetate salt used to prepare the substrate mixture was the potassium salt. Transport of 20 µM [1,2-14C]acetate was measured under standard conditions either in the absence or in the presence of 50 mM NaCl.
Specific ß-galactosidase activity was assayed at 28°C in cells permeabilized with chloroform and sodium dodecyl sulfate by using o-nitrophenyl-ß-D-galactopyranoside as the substrate and was expressed in Miller units (16). The protein concentration was determined by the method of Lowry et al. (15) by using bovine serum albumin as the standard.
The enzyme activities and transport rates reported below are the means of at least three separate experiments.
DNA manipulation. Bacterial genomic DNA was obtained by the method of Silhavy et al. (26). Plasmid DNA was routinely prepared by the boiling method (9). For large-scale preparation, a crude DNA sample was subjected to purification on a column (Qiagen Gmbh, Düsseldorf, Germany). DNA manipulations were performed essentially as described by Sambrook and Russell (25). DNA fragments were amplified by PCR by using E. coli chromosomal DNA as the template. When necessary, specific restriction sites were incorporated at the 5' ends of the primers to facilitate cloning of the fragments in the appropriate vector. PCRs were performed with Pfu DNA polymerase under standard conditions.
DNA was sequenced by using an automated ABI 377 DNA sequencer and fluorescent dye termination methods.
Mutagenesis and genetic techniques.
Tn10 insertion mutagenesis was performed by infection with phage
NK1098 as described by Way et al. (30). Genetic crossing was performed by P1 vir-mediated transduction (16).
Analysis of expression by Northern blotting. Total RNA was prepared by using the SV total isolation system of Promega (Madison, Wis.) and was quantified by absorbance at 260 nm. Northern blot hybridization was performed with each RNA sample (10 µg) as described by Moralejo et al. (17).
Construction of lacZ fusions to analyze promoter function.
Transcriptional fusions to lacZ were constructed by inserting DNA fragments into plasmid pRS550 (27). This plasmid carried a promoterless lac operon and genes that confer resistance to kanamycin and ampicillin. To construct the transcriptional acs-yjcH-yjcG-lacZ fusion, primers Acs3 and YjcG7 (Table 2) were used to amplify a 2,810-bp fragment of the 5' upstream region of the yjcG gene. This fragment contained the acsP1 and acsP2 promoters (13) and the coding regions of the yjcH and acs genes. Using PCR, we also prepared two additional constructs in which acsP1 and acsP2 were deleted. Fusion 
1(acs-yjcH-yjcG-lacZ) was obtained with primers Acsdel-1 and YjcG7, and fusion 
2(acs-yjcH-yjcG-lacZ) was obtained with primers Acsdel-2 and YjcG7. Fragments were digested with SmaI and BamHI and cloned into the EcoRI (blunt ended with the Klenow fragment) and BamHI restriction sites of plasmid pRS550. After transformation of strain XL1Blue, recombinant plasmids were selected as blue colonies on LB plates containing X-Gal, ampicillin, and kanamycin. Plasmid DNA was sequenced by using an M13 primer to ensure that the desired fragment was inserted in the correct orientation and that no mutations had been introduced by the PCR amplification. Merodiploids were obtained by transferring the fusions as single copies into the trp operon of E. coli strain TE2680 as described by Elliot (7). The transformants were selected on the basis of kanamycin resistance and were screened for sensitivity to ampicillin and chloramphenicol. P1 vir lysates were prepared to transduce the fusions into various genetic backgrounds.
|
View this table: [in a new window] |
TABLE 2. Oligonucleotides used in this study
|
|
|
|---|
To locate the gene responsible for the suppressor phenotype, we obtained random Tn10 insertion mutants from strain JA212 as described in Materials and Methods and selected them on tetracycline plates. Replica plating of the colonies on glycolate allowed us to search for clones that had lost the ability to grow on this carbon source. To avoid multiple transposon insertions, we transduced the mutations into strain JA212 and again selected transductants by using resistance to tetracycline and the glycolate-negative phenotype. In order to discard insertion mutations in other genes of the glycolate pathway, only mutants complemented by plasmid pFN12 (Table 1), which expresses the glycolate permease encoded by glcA, were selected. In this way, we isolated strain JA213 and used it to locate the gene encoding the new transporter. In this strain, the persistence of glcA::cat and lldP::Tn5 mutations was shown by PCR.
To map the Tn10 insertion in strain JA213, we digested the genomic DNA of this strain with HpaII and ligated the resulting fragments, which were subjected to inverse PCR with oligonucleotides miniTn10-A and miniTn10-C (19). Sequencing of the amplified fragment and in silico analysis of the sequence allowed us to locate the insertion in gene yjcG. This gene, whose function is unknown, is located between positions 3356 and 5005 of the E. coli sequence deposited under accession number AE000480, which corresponds to centisome 92.28 of the bacterial chromosome (2).
yjcG gene encodes a transporter belonging to the sodium:solute symporter family responsible for glycolate transport in strain JA212. The yjcG gene encodes a highly hydrophobic 549-amino-acid protein with 14 putative transmembrane segments and a molecular mass of 59,197 Da. Computational analysis of the YjcG amino acid sequence (P32705) revealed high levels of similarity to the proline permeases of several bacteria, especially PutP (proline permease) of E. coli (39% similarity over the entire length). On the basis of these characteristics the yjcG gene product was classified as a member of the sodium:solute symporter family.
To show that the yjcG gene product accounted for the transport of glycolate in strain JA212, we grew on 0.5% casein acid hydrolysate cells of this strain and strain JA213, in which yjcG was disrupted by insertion of transposon Tn10. The cells were collected at the end of the exponential phase and were processed to measure glycolate transport as described above. The time courses of label incorporation in the two strains showed that only strain JA212 accumulated glycolate (Fig. 1), thus indicating that yjcG is needed for expression of the new transporter activated in this strain. Since induction of the glc operon requires glycolate, we grew these cultures in the absence of glycolate to ensure that the cells could not metabolize it.
![]() View larger version (14K): [in a new window] |
FIG. 1. Glycolate transport dependence on the YjcG function: time course of [1,2-14C]glycolate uptake by whole cells of strain JA212 ( ) and its derivative JA213 ( ) grown on casein acid hydrolysate.
|
yjcG gene belongs to an operon involved in acetate metabolism. Searching for the suppressing mutation, we studied the expression of yjcG by comparing the patterns of transcription of this gene in wild-type and mutant strains by Northern blotting. Total RNAs were prepared from mid-exponential-phase cultures (optical density at 600 nm [OD600], 0.5) of strains MC4100 and JA212 grown in LB or casein acid hydrolysate in the absence or presence of 30 mM glycolate. The probe used was a 575-bp internal fragment of the yjcG gene amplified by PCR with oligonucleotides YjcG3 and YjcG4 (Table 2). The results (Fig. 2) showed that the yjcG-specific transcript was not present in strain MC4100 grown in any of the conditions tested. In all these conditions, the RNA preparations of strain JA212 contained transcripts that ranged from 4.2 to 1.7 kb long; the latter size corresponds to the size of the yjcG gene. These results indicate that this gene is cotranscribed with flanking genes in strain JA212.
![]() View larger version (44K): [in a new window] |
FIG. 2. Analysis of expression of yjcG and acs by Northern blotting. Total RNA was obtained from cultures of wild-type strain MC4100 and strain JA212 grown aerobically to an OD600 of 0.5 in LB (lanes 1 and 4), casein acid hydrolysate (lanes 2 and 5), or casein acid hydrolysate in the presence of glycolate (lanes 3 and 6). Hybridization was performed with a 575-bp yjcG probe or with a 575-bp acs probe. The position of the full-length polycistronic mRNA is indicated by an arrow.
|
![]() View larger version (20K): [in a new window] |
FIG. 3. Restriction map and gene organization of the yjcG genomic region. The open bar represents the genomic region (accession no. AE000480) encompassing yjcG, and relevant restriction sites are indicated as follows: E, EcoRI; and V, EcoRV. The large arrows indicate the positions and directions of the genes, and the genes belonging to the acs-yjcH-actP operon are indicated by grey arrows. The approximate locations of the acs promoters acsP1 and acsP2 are also indicated. The lines above the yjcF, yjcG, and acs genes indicate the fragments used as probes in the Northern experiments. The arrows at the bottom indicate the DNA fragments fused to lacZ for testing promoter function, and the numbers indicate the positions of their 5' ends in relation to the ATG codon of the acs gene.
|
In the acs-yjcH-yjcG transcriptional fusion the fragment obtained by PCR from strain MC4100 was 1 kb longer than the fragment amplified from strain JA212 (Fig. 4A), which matched the size expected from analysis of this region of the E. coli genome. This result suggested that there was an insertion mutation in strain MC4100. Subsequent sequencing of this region revealed an IS2 element at position 898 of the acs gene in this strain (Fig. 4B). This inserted element had the same orientation with respect to the direction of transcription of the acs gene, hence causing polar effects on expression of downstream genes (28). This explained the lack of the yjcG transcript in the Northern experiments with strain MC4100 and is consistent with the operon structure proposed above. In addition, no yjcG transcript was seen with RNA preparations of
acs::Km mutant strains AJW803 and JA215 (data not shown). In strain JA212, the IS2 element was precisely excised, which restored the wild-type sequence of the acs gene and expression of the downstream genes. Consistent with these results, strain MC4100 displayed an acetate utilization phenotype similar to that of an acs-deficient mutant, which grew poorly on acetate at concentrations below 5 mM (14), whereas strain JA212 grew well on acetate even at concentrations as low as 2.5 mM.
![]() View larger version (27K): [in a new window] |
FIG. 4. Physical mapping of the IS2 insertion in acs of strain MC4100. (A) Electrophoretic analysis of fragments obtained by PCR from chromosomal DNA of strains MC4100 and JA212 with primers Acs3 and YjcG7. The positions of the primers and of the IS2 element in the acs-yjcH-yjcG operon are indicated in the diagram. (B) DNA sequence of the junction sites of the IS2 insertion. The sequence corresponding to the IS2 element is indicated by uppercase letters, while the sequence of acs is indicated by lowercase letters. The insertion-generated repeats are enclosed in boxes. The arrows at the bottom indicate the direction of transcription of the truncated acs gene and the IS2 element.
|
![]() View larger version (11K): [in a new window] |
FIG. 5. Acetate transport dependence on the YjcG (ActP) function in various genetic backgrounds. (A) Time course of 20 µM [1,2-14C]acetate uptake at 15°C by whole cells of strain JA212 ( ) and its actP::Tn10 derivative JA213 ( ) grown on casein acid hydrolysate. (B) Time course of 20 µM [1,2-14C]acetate uptake at 25°C by whole cells of the isocitrate lyase-deficient strain JA165 ( ) and its actP::Tn10 derivative JA214 ( ) grown on casein acid hydrolysate. The dotted line indicates the theoretical acetate transport mediated by ActP calculated by subtracting the rates obtained for the two strains.
|
To examine the possibility that the residual transport was due to passive diffusion, we measured acetate transport in strains JA165 and JA214 in the presence of the uncoupler carbonyl cyanide m-chlorophenylhydrazone (CCCP) at a concentration of 5 µM, which blocks proton motive force-dependent uptake. It has also been reported that this protonophore can indirectly dissipate the sodium concentration gradient depending on the activity of Na+/H+ antiporters. This may result in the inhibition of Na+-dependent transport systems, as has been reported for proline transport (31) or sodium-dependent GltS glutamate transport, both in E. coli (10). Our results showed that the two entry processes are sensitive to CCCP (Fig. 6), thus proving that they are both mediated by transporters driven by transmembrane electrochemical potential. In the absence of ActP function (strain JA214) and with the second transport activity inhibited by CCCP, the observed residual entry process, which was directly proportional to the acetate concentration in the medium, was compatible with a passive diffusion component for this solute.
![]() View larger version (21K): [in a new window] |
FIG. 6. Effect of CCCP on the concentration kinetics of acetate uptake. Transport of [1,2-14C]acetate was measured in the absence (circles) or in the presence (triangles) of 5 µM CCCP in strain JA165 (solid symbols) and in its derivative, ActP-deficient mutant strain JA214 (open symbols). The effect of CCCP was analyzed in cells that were preincubated with the uncoupler for 30 s before the radioactive substrate was added.
|
-hydroxy acids up to four carbons long, and the amino acid proline due to the similarity of the ActP carrier to PutP. Figure 7 shows that in strain JA165 propionate caused significant inhibition (more than 70%), whereas butyrate caused only weak inhibition (<20%). Among the
-hydroxy acids, those containing two or three carbon atoms caused weak inhibition (around 25%). Malate, with four carbon atoms, had no effect. In contrast, in strain JA214, which has no ActP function and transports acetate through the secondary unidentified carrier, none of the compounds tested caused inhibition (data not shown).
![]() View larger version (23K): [in a new window] |
FIG. 7. Inhibition of acetate transport by other solutes. Uptake of 20 µM [1,2-14C]acetate by cells of strain JA165 grown on casein acid hydrolysate was assayed in the presence of competing solutes, which were added to the assay mixture at a final concentration of 1 mM.
|
![]() View larger version (21K): [in a new window] |
FIG. 8. Concentration kinetics of [1,2-14C]acetate transport mediated by ActP: plot of the values calculated by subtracting the rates determined for strain JA214 from the values determined for strain JA165 against acetate concentrations. The inset shows a double-reciprocal plot of the data.
|
|
|
|---|
The mapping of actP in a cluster with acs involved in acetate dissimilation and the cotranscription of the two genes strongly suggested that actP is located in an operon for acetate dissimilation and that its product participates in acetate transport. Cotranscription was first shown by detection of a full-length transcript in strain JA212. The low concentration of this transcript observed when a Northern blot was hybridized with an acs probe may have been due to the presence of two repetitive extragenic palindromic sequences in the 199-bp acs-yjcH intercistronic region (accession number AE000480). It has been reported that these sequences can stabilize upstream RNA by protecting it from 3'-to-5' nuclease degradation (18, 29), which in our case resulted in accumulation of the transcript fragment corresponding to the acs gene (Fig. 2).
The hypothesis that there is an operon that includes acs, yjcH, and actP is supported by (i) the absence of promoter activity downstream of the acs gene promoters acsP1 and acsP2 and (ii) the polar effects of an IS2 insertion in acs on actP expression, as shown by the lack of transcripts in strain MC4100. Thus, in the proposed operon the acs gene, encoding the acetyl-CoA synthetase, is cotranscribed with the yjcH gene, whose function is unknown, and the actP gene, which is responsible for acetate transport. The yjcH gene codes for a small putative membrane protein consisting of 104 amino acid residues, which is highly conserved in many bacterial species but still has with no defined function.
The specificity of ActP is rather narrow, a common feature of most bacterial carboxylate permeases, such as GlcA and LldP; an exception is the monocarboxylate permease of Rhizobium leguminosarum, which displays wider specificity (10). In this context, it is of interest that although ActP, like the GlcA and LldP permeases, transports small carboxylates, there is no sequence similarity between these transporters and ActP. This is probably reflected in the structure of the substrate recognition site. Indeed, ActP is highly specific for short-chain aliphatic monocarboxylates, whereas GlcA and LldP recognize two- and three-carbon monocarboxylates with a hydroxyl group in position 2. The presence of this hydroxyl group in short-chain monocarboxylates (e.g., glycolate) reduces the ability of these compounds to compete with acetate transport mediated by ActP and indicates a low affinity for ActP (Fig. 7). The ActP substrate specificity may have evolved from selective pressure created by the need to recover the carbons of acetate excreted during fermentation, perhaps an essential process in certain conditions.
Although ActP appears to be a transport system belonging to the sodium:solute symporter family, our experiments did not allow us to show dependence on sodium of acetate transport by ActP. It is known that it is difficult to completely deplete sodium in the reaction mixtures and buffers used in transport assays, especially under our conditions, under which sodium was present in the labeled source of acetate. The residual sodium levels might be sufficient to allow transport by systems with a high affinity for this cation (10). In this context, the inhibition of acetate transport by the uncoupler CCCP indicates that the driving force used by ActP is a transmembrane electrochemical potential. However, as reported by other authors (31), these experiments do not discriminate between H+- and Na+-coupled symporters.
The residual acetate uptake in the ActP-deficient mutants suggests that there is another so-far-undetermined transporter for this compound, which is partially inhibited by the uncoupler CCCP. Passive diffusion accounts for the acetate entry that is insensitive to CCCP, which represents, at an acetate concentration of 20 µM, less than 8% of the total uptake in cells of strain JA165 expressing both ActP and the undetermined transporter.
The test for acetate utilization at a wide range of concentrations (2.5 to 50 mM) showed that strain JA212 grew well at all acetate concentrations, while the acs-deficient parental strain MC4100 grew poorly at low concentrations. In contrast, no differences were detected between the growth at these low concentrations of an ActP-deficient mutant and the growth of cells with a functional ActP. This observation may be explained by the presence of the second acetate carrier and the passive diffusion component for acetate entry, which can substitute for ActP function. Even the lowest concentration used, 2.5 mM, is far greater than the saturating concentrations for these carriers. These findings do not invalidate the hypothesis that ActP plays a role as an efficient carrier able to recapture acetate at very low concentrations (in the micromolar range). In these conditions, the ActP function provides increasing intracellular concentrations of acetate to be activated by acetyl-CoA synthetase, which has a Km of 0.2 mM for this substrate (4). Taken together, these facts may indicate that the combined action of ActP and Acs facilitates scavenging of the traces of excreted acetate during mixed-acid fermentation or in aerobic conditions when the carbon flux exceeds the capacity of the central metabolic pathways.
This work was supported by grant BMC2001-3003 from the Dirección General de Investigación, Ministerio de Ciencia y Tecnología, Madrid, Spain, and by the Comissionat per Universitats i Recerca de la Generalitat de Catalunya. M.F.N. was a recipient of a predoctoral fellowship from the Generalitat de Catalunya.
|
|
|---|
70 is the principal sigma factor responsible for transcription of acs, which encodes acetyl coenzyme A synthetase in Escherichia coli. J. Bacteriol. 182:551-554.
This article has been cited by other articles:
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Copyright © 2009 by the American Society for Microbiology. For an alternate route to Journals.ASM.org, visit: http://intl-journals.asm.org | More Info»