Previous Article | Next Article ![]()
Journal of Bacteriology, December 2003, p. 7129-7139, Vol. 185, No. 24
0021-9193/03/$08.00+0 DOI: 10.1128/JB.185.24.7129-7139.2003
Copyright © 2003, American Society for Microbiology. All Rights Reserved.
University of Rochester, Rochester, New York 14642
Received 12 May 2003/ Accepted 15 September 2003
|
|
|---|
|
|
|---|
Quorum-sensing transcriptional regulators have been identified in various species throughout the class Proteobacteria (9). LuxR, the transcriptional regulator of Vibrio fischeri, is the prototype member of this family; and genetic analyses have defined the functional regions of this protein. The N-terminal two-thirds of LuxR binds its autoinducer (10), and the C-terminal one-third of LuxR contains a helix-turn-helix motif that binds DNA and activates target gene expression (3). It was postulated that LuxR functions as a multimer as overexpression of the N-terminal domain inhibits the activity of the wild-type protein (2).
Molecular genetic and biochemical studies have demonstrated that P. aeruginosa LasR, RhlR, and QscR; Agrobacterium tumefaciens TraR; and Erwinia carotovora CarR form multimers. However, the mechanism of multimerization varies among the transcriptional regulator homologs. LasR requires its autoinducer for multimerization, and this multimerization correlates with its capacity to activate target gene expression (15). In addition, an N-terminal domain fragment of LasR inhibits the activity of wild-type LasR in vivo (15). TraR was recently crystallized as a complex with its cognate autoinducer and its DNA-binding site (30, 34). The crystal structures are the first obtained for a quorum-sensing transcriptional regulator, and they display TraR as a dimer with the N-terminal domain of each monomer binding to its autoinducer and the C-terminal domain of each monomer binding to DNA. The N- and C-terminal domains are connected by a linker (12 to 13 amino acid residues), and both domains participate in protein dimerization (30, 34). Previous work by Zhu and Winans demonstrated that apo-TraR is unstable and that TraR's cognate autoinducer, N-(3-oxo-octanoyl)-L-homoserine lactone, stabilizes nascent TraR for folding into its mature tertiary structure (35). In contrast, a recent genetic analysis of TraR demonstrated that the binding of TraR to its cognate autoinducer drives protein dimerization (19). While CarR also binds its autoinducer, like other members of this protein family, CarR exists as a preformed dimer and autoinducer binding causes the dimers to form higher-order multimers (33). Through fluorescence anisotropy and in vivo chemical cross-linking, two recent reports suggested that RhlR and QscR function similarly to CarR. The reports showed that RhlR forms a homodimer in the absence of C4-HSL and that QscR forms a multimer in the absence of either C4-HSL or 3O-C12-HSL (17, 31). They further demonstrated that while C4-HSL has no effect on the RhlR homodimers, 3O-C12-HSL could dissociate the homodimers into monomers (31). To gain a better understanding of the functional mechanism of the RhlR transcriptional regulator, this study analyzed RhlR with regard to protein multimerization, target gene activation, and C4-HSL binding. Through a series of deletions and site-specific mutations of conserved amino acid residues, critical functional regions of the protein were defined.
|
|
|---|
B21P1
lasB::lacZ lysogen
(27) was used for the
transcriptional activation studies. Wild-type P.
aeruginosa PAO220
(13) carrying an
rhlA::lacZ transcriptional fusion
(a generous gift of Herbert Schweizer) was used to determine if RhlR
functions as a multimer in P.
aeruginosa.
DNA
techniques.
Plasmid DNA was
purified by the Spin Mini Kit or Plasmid Mini Kit protocol (QIAGEN,
Valencia, Calif.). E. coli DH5
was used as
the host strain for molecular cloning. E. coli was
transformed (25), and
P. aeruginosa was electroporated
(28), as previously
described. Restriction endonucleases and DNA-modifying enzymes were
obtained from Invitrogen Life Technologies (Carlsbad, Calif.) and New
England Biolabs (Beverly, Mass.). Oligonucleotide synthesis and DNA
sequencing were performed by the Core Nucleic Acid Facility of the
Functional Genomics Center at the University of Rochester. PCR was
performed with Vent DNA polymerase (New England Biolabs) or an Expand
Long Template PCR system (Boehringer Mannheim, Mannheim, Germany) in
accordance with the manufacturer's
specifications.
Generation of LexA(DBD)-RhlR fusion plasmids. The rhlR gene of P. aeruginosa was PCR amplified from plasmid pJPP12 (pBS SK- containing rhlABRI' from PAO1, a generous gift of Jim Pearson) and fused in frame with the DNA-binding domain (DBD) of LexA, which is expressed from the lacUV5 promoter of plasmid pSR658 (5). The sense primer contained a unique XhoI restriction site to facilitate the generation of the translational fusion, and the antisense primer contained a unique PstI site.
Plasmids with 5'
and 3' DNA deletions of rhlR were generated by PCR
with plasmid pJPP12 as the template. For generation of the N-terminal
rhlR deletions, the sense primers contained a unique
XhoI restriction site, the DNA sequence corresponding to the
first three amino acids of the rhlR gene, and an 18- to 21-bp
annealing region homologous to the internal coding region of
rhlR. For generation of the C-terminal rhlR deletion,
the antisense primer contained a unique PstI site, the DNA
sequence of the last three amino acids of the rhlR gene, and a
15-bp annealing region homologous to the internal coding region of
rhlR. The antisense primer used in the generation of the
N-terminal deletions and the sense primer used in the generation of the
C-terminal deletion were the same as those used in the generation of
the original LexA(DBD)-RhlR fusion. All PCR products were digested with
XhoI and PstI, fused in frame with the LexA DBD of
plasmid pSR658, and verified by sequencing. The five N-terminal
deletions of RhlR coding for truncated proteins were
4-25,
4-66,
4-82,
4-117, and
4-161, and
the C-terminal deletion of RhlR coding for a truncated protein was
179-239.
Nine site-specific mutations of the rhlR gene were generated with a recombination PCR-based protocol (14). The rhlR gene was first cloned from plasmid pSR658 into XhoI/PstI-digested pBS SK- (Stratagene, La Jolla, Calif.). Briefly, the mutagenic primers consisted of 4 to 6 bp of homologous sequence at the 5' end, followed by one mutagenic nucleotide and 18 to 20 bp of homologous sequence at the 3' end. The nonmutagenic primers were homologous to the pBS SK- coding sequence. Complementary PCR fragments were purified and used to transform E. coli XL1-Blue cells. The entire rhlR gene of the transformants was sequenced to verify that only the intended mutation, and no secondary mutations, was generated. The mutated rhlR genes were then cloned into XhoI/PstI-digested pSR658 to generate translational fusions with the LexA DBD. The mutations introduced into RhlR were Asp-12-Glu, Ala-44-Gly, Asp-81-Glu, Ser-135-Thr, Leu-162-Val, Leu-181-Val, Lys-196-Arg, Th-211-Ser, and Lys-222-Arg.
Generation of antibodies to
RhlR.
For production of
RhlR protein for immunization, E. coli
DH5
(pJPP8) (pEX1.8 containing
Ptac-rhlR)(22) was grown overnight
at 37°C in LB medium containing AMP at 100 µg/ml and
subcultured to a starting optical density at 600 nm (OD600)
of 0.05 in 2 liters of the same medium. The culture was incubated with
shaking at 37°C for 3.5 h.
Isopropyl-ß-D-thiogalactopyranoside (IPTG) was added
to a final concentration of 1 mM, and the culture was incubated for an
additional hour. Following centrifugation of the culture at 14,000
x g for 10 min at 4°C,
the supernatant was decanted and the resulting pellet was resuspended
in 30 ml of TES buffer (50 mM Tris HCl, 1 mM EDTA, 100 mM NaCl)
(12) with
phenylmethylsulfonyl fluoride (PMSF) at 1 µg/ml. This solution
was French pressed at 18,000 lb/in2 and centrifuged at
17,000 x g for 20 min, and the
resulting pellet was resuspended in TES-PMSF buffer
(12). The French pressing
and centrifugation were repeated, and the resulting cell pellet was
frozen at -70°C. The procedure was repeated on a
smaller scale (500 ml) with a culture of E. coli
DH5
(pEX1.8) (pEX1 containing a P. aeruginosa
origin of replication)
(22) for use as a
negative control. Cell pellets were resuspended in 4 ml of 1x
sample buffer (25).
Equivalent samples of pressed E. coli
DH5
(pJPP8) and E. coli DH5
(pEX1.8)
were separated by sodium dodecyl sulfate (SDS)-polyacrylamide gel
electrophoresis (PAGE), and proteins were visualized with rapid
Coomassie stain (25).
Protein with the approximate molecular mass of RhlR (28 kDa) was
excised from the gel and frozen at -70°C. Gel fragments
were resuspended in incomplete Freund's adjuvant (Sigma, St.
Louis, Mo.) and injected into four female BALB/c mice 6 to 8 weeks old.
Injections of antigen were given every 2 weeks. Generation of specific
antibodies to RhlR was tested by Western analysis. Serum samples from a
preinoculation bleeding of BALB/c mice were used as controls. Briefly,
whole-cell lysates of E. coli DH5
(pEX1.8)
and DH5
(pJPP8) prepared as described above were separated by
SDS-PAGE and transferred to PROTRAN nitrocellulose (Schleicher &
Schuell, Inc., Keene, N.H.). Membranes were blocked in Immuno Buffer
(IB; 50 mM Tris, 150 mM NaCl, 5 mM EDTA, 0.05% Tween 20,
0.01% SDS) containing 5% nonfat dry milk. All washes were
done with IB. Primary antibody was diluted 1/2,000 in IB, and
peroxidase-conjugated goat anti-mouse secondary antibody (Kirkegaard
& Perry Laboratories, Gaithersburg, Md.) was diluted 1/10,000 in
IB. Specific binding was visualized with the LumiGLO chemiluminescent
substrate system (Kirkegaard & Perry Laboratories). The membranes
were exposed to X-ray film (X-Omat; Eastman Kodak Company, Rochester,
N.Y.). No reactivity was seen with the preimmune serum. For the
anti-RhlR antibodies, a band of the expected size (28 kDa) was present
only in the pJPP8 sample and not in the pEX1.8 negative
control.
Stability of RhlR in the
presence and absence of C4-HSL.
E. coli
DH5
(pJPP8) and E. coli
DH5
(pSR658-lexA[DBD]-rhlR) were
grown overnight in LB medium at 37°C with the appropriate
antibiotic (either AMP at 100 µg/ml or TET at 12 µg/ml)
and subcultured to a starting OD600 of 0.05 in the same
medium. When an OD600 of 0.5 was reached, IPTG was added to
a final concentration of 1 mM in the presence and absence of 50
µM C4-HSL. Growth was continued at 37°C for
an additional 2 h. Pellets were resuspended in 1x
sample buffer (25).
Protein separation by SDS-PAGE, Western analysis, and specific binding
were performed as described above. The primary antibody for the blots
containing the LexA(DBD)-RhlR protein samples was rabbit polyclonal
anti-LexA (Invitrogen), and the secondary antibody was
peroxidase-conjugated donkey anti-rabbit (Amersham, Piscataway,
N.J.).
RhlR multimerization
assays.
Multimerization of
wild-type LexA(DBD)-RhlR and the LexA(DBD)-RhlR mutant forms was
assayed with a LexA-based protein interaction system
(7). The
pSR658-lexA(DBD)-rhlR plasmid constructs were
electroporated into E. coli SU101 carrying a
sulA::lacZ fusion. The
transformants were grown overnight in LB medium containing TET at 12
µg/ml and subcultured to a starting OD600 of 0.05 in
LB medium containing TET at 12 µg/ml and 1 mM IPTG in the
presence and absence of 50 µM C4-HSL. The cultures
were grown to an OD600 of
0.8, and
ß-galactosidase activity was assayed as previously described
(20).
RhlR
transcriptional activation assays.
To determine if the
pSR658-lexA(DBD)-rhlR plasmid constructs
were able to activate target gene expression, they were transformed
into E. coli MG4 carrying a
lasB::lacZ fusion. The
transformants were grown overnight in LB medium containing TET at 12
µg/ml and subcultured to a starting OD600 of 0.05 in
LB medium containing TET at 12 µg/ml and 1 mM IPTG in the
presence and absence of 50 µM C4-HSL. The cultures
were grown to an OD600 of
1.0, and
ß-galactosidase activity was assayed as previously described
(20).
Statistical
analysis.
For the
multimerization and transcriptional activation studies, two to four
independent assays were performed with triplicate samples. Data were
analyzed by one-way analysis of variance with a post-hoc Tukey test to
determine statistical significance (P
0.05).
Inhibition of wild-type RhlR in
P. aeruginosa.
pSR658-lexA(DBD)-rhlR
179-239 and pSR658-lexA(DBD)-rhlR
Thr-211-Ser were digested with XhoI and KpnI, the
ends were made flush with Klenow, and then both were redigested with
PstI. Purified fragments were ligated to
SmaI/PstI-digested pEX1.8
(22), placing the
rhlR constructs under the control of the tac
promoter. pEX1.8, pEX1.8 RhlR
179-239, and pEX1.8 RhlR
Thr-211-Ser were electroporated into PAO220
(13). PAO220 carrying the
plasmid constructs was grown overnight in PTSB medium containing CARB
at 200 µg/ml and subcultured to a starting OD660 of
0.05 in PTSB medium containing CARB at 200 µg/ml in the
presence of 1 mM IPTG. When appropriate, 2 or 10 µM
C4-HSL was added to the cultures. The cultures were grown to
an OD660 of
1.0, and ß-galactosidase
activity was assayed as previously described
(20).
[3H]C4-HSL-binding
assays.
E.
coli DH5
carrying the
pSR658-lexA(DBD)-rhlR plasmid constructs was grown
overnight at 37°C in LB medium containing TET at 12
µg/ml and subcultured to a starting OD600 of 0.05 in
the same medium. When an OD600 of 0.5 was reached, IPTG was
added to a final concentration of 1 mM and growth was continued at
37°C for an additional 2 h. Approximately 0.2
µM [3H]C4-HSL (purified as
described in reference
22) was added to 1 ml of
culture, and [3H]C4-HSL binding was
assayed as previously described
(22).
|
|
|---|
Zhu and Winans have previously demonstrated that
apo-TraR is unstable in the absence of its cognate autoinducer
(35). Therefore, we first
determined if RhlR is stable in E. coli in the
absence of C4-HSL (Fig.
1A). Western analysis with anti-RhlR antibodies was performed on whole-cell
lysates of E. coli DH5
(pJPP8)
(22) grown in the absence
and presence of C4-HSL. A band of the expected size (28 kDa)
was present to roughly the same level in both the absence (lane 1) and
presence (lane 2) samples, indicating that C4-HSL is not
necessary for the stabilization of RhlR in E. coli.
We also determined if the LexA(DBD)-RhlR fusion is stable in the
presence and absence of C4-HSL (Fig.
1B). Western analysis with
anti-LexA antibodies was performed on whole-cell lysates of E.
coli
DH5
(pSR658-lexA[DBD]-rhlR)
grown in the absence and presence of C4-HSL. Again, a band
of the expected size (36 kDa) was present to roughly the same level in
both the uninduced (lane 1) and induced (lane 2) samples, indicating
that C4-HSL is not necessary for stabilization of the
LexA(DBD)-RhlR fusion in E. coli. These results
indicated that, unlike TraR
(35), apo-RhlR is stable
in the absence of its cognate autoinducer,
C4-HSL.
![]() View larger version (53K): [in a new window] |
FIG. 1. Stability
of RhlR in the absence and presence of C4-HSL. Equivalent
samples of whole-cell lysates of E. coli
DH5 (pJPP8) (A) and E. coli
DH5 (pSR658-lexA[DBD]-rhlR)
(B) grown in the absence (lane 1) and presence (lane 2) of 50
µM C4-HSL were separated by SDS-PAGE and analyzed by
immunoblotting with either anti-RhlR (A) or anti-LexA
(B)
antibodies.
|
![]() View larger version (16K): [in a new window] |
FIG. 2. Multimerization
and activation of LexA(DBD)-RhlR are dependent on C4-HSL.
E. coli SU101 ( ) and an E.
coli MG4 lasB::lacZ
lysogen ( ) expressing the full-length LexA(DBD)-RhlR fusion
protein were grown in the presence of 0 to 50 µM
C4-HSL. For E. coli SU101, multimerization
is indicated by a decrease in the number of Miller units (right
y axis), and for the E. coli MG4
lasB::lacZ lysogen, activity is
indicated by an increase in the number of Miller units (left y
axis). Representative results from one independent assay are presented
as the average of triplicates plus and minus the standard error of the
mean.
|
It was next determined if RhlR multimerization is necessary for it to transcriptionally activate gene expression. For the activation studies, the pSR658-lexA(DBD)-rhlR plasmid was introduced into E. coli MG4 carrying a lasB::lacZ lysogen. It has previously been demonstrated that RhlR is an activator of lasB in P. aeruginosa and E. coli (1, 22). The transcriptional activation of lasB can be seen as an increase in ß-galactosidase activity. The E. coli MG4 lasB::lacZ lysogen (27) carrying the pSR658-lexA(DBD)-rhlR plasmid was grown in the presence of C4-HSL concentrations ranging from 0 to 50 µM, and ß-galactosidase activity was quantified (Fig. 2). In the absence of C4-HSL, the LexA(DBD)-RhlR fusion protein generated ß-galactosidase activity similar to that obtained with the pSR658 vector control (data not shown), and the LexA(DBD)-RhlR fusion protein showed increasing activity (an increase in the number of Miller units) with increasing concentrations of C4-HSL. These results indicated that the protein transcriptional activity of lasB by LexA(DBD)-RhlR was also dependent on the C4-HSL concentration. The RhlR multimerization and transcriptional activation results are consistent with previously reported data that show a requirement for C4-HSL and a positive correlation between the concentration of C4-HSL and the ability of RhlR to act as a transcriptional activator (22). These results are different from those of the earlier study by Ventre et al.; however, they did not perform any RhlR transcriptional activation studies (31). The C4-HSL concentration necessary for both half-maximal multimerization and half-maximal activity was approximately 3 µM, and no significant difference in multimerization or transcriptional activity was observed at concentrations above 40 µM. Throughout the remainder of the study, all of the multimerization and transcriptional activation assays were performed in the absence or presence of 50 µM C4-HSL, which provided an autoinducer excess.
The P. aeruginosa LasR transcriptional regulator multimerizes in the presence of 3O-C12-HSL (15), and Pesci et al. have shown that 3O-C12-HSL inhibits C4-HSL from binding to RhlR (24). To determine if full-length RhlR would multimerize in the presence of 3O-C12-HSL or only in the presence of its cognate autoinducer, C4-HSL, the LexA(DBD)-RhlR multimerization assay was also performed in the absence and presence of 50 µM 3O-C12-HSL. Inclusion of 50 µM 3O-C12-HSL did not result in multimerization, indicating that RhlR multimerization was specific for C4-HSL (data not shown).
Domains of RhlR necessary for
multimerization and transcriptional activity.
To determine the regions of RhlR
necessary for it to multimerize and transcriptionally activate
lasB, six truncated forms of RhlR were generated (Fig.
3) and assessed for their multimerization and transcriptional activation
abilities (Fig. 4A and
B). Five of the deletions were at the N-terminal end of the protein
[LexA(DBD)-RhlR
4-25,
4-66,
4-81,
4-117, and
4-161], and one of the deletions was
at the C-terminal end of the protein [LexA(DBD)-RhlR
179-239]. Western analysis with polyclonal anti-LexA
antibodies indicated that all of the truncated forms of RhlR were
stable in E. coli in the presence of 50 µM
C4-HSL to roughly the same level (data not shown). As
previously demonstrated (Fig.
2), the LexA(DBD)-RhlR
fusion protein multimerized and possessed transcriptional activity in
the presence of 50 µM C4-HSL. The LexA(DBD)-RhlR
deletion results indicated that RhlR
4-117 multimerized
independently of C4-HSL and that RhlR
179-239
demonstrated impaired multimerization in a C4-HSL-dependent
manner. The P value for the difference between the uninduced
and induced samples of the
179-239 deletion form of RhlR was
0.1. Taking into account all of the data that will be
presented on this C-terminal truncated form of RhlR, including the
finding that it is multimerization and activity of native RhlR,
this partial multimerization is most likely significant.
The remaining truncated forms of RhlR were unable to multimerize
regardless of the presence of C4-HSL, and none of the six
deletion-carrying forms of RhlR was able to transcriptionally activate
lasB (Fig. 4A and
B).
![]() View larger version (40K): [in a new window] |
FIG. 3. Schematic
representation of the RhlR protein. The full-length RhlR protein is
displayed with the proposed autoinducer (AI)-binding domain, linker,
and DBD indicated. The amino acids that underwent site-specific
mutagenesis are shown above the drawing. The truncated RhlR
polypeptides are displayed
below.
|
![]() View larger version (37K): [in a new window] |
FIG. 4. Multimerization
and transcriptional activity of the LexA(DBD)-RhlR deletion forms.
E. coli SU101 (A) and the E.
coli MG4 lasB::lacZ
lysogen (B) carrying the pSR658 vector control, the
full-length LexA(DBD)-RhlR fusion protein, and the LexA(DBD)-RhlR
truncated proteins were grown with no autoinducer ( ) or with
50 µM C4-HSL
( 0.05) between the samples grown in the absence or
presence of autoinducer is indicated by an asterisk. The P
value for the RhlR 179-239 construct was 0.1
(**).
|
4-25 demonstrated that the
extreme N-terminal end of RhlR is essential for autoinducer-dependent
multimerization. Similar results have been reported for the N-terminal
end of LasR (15), and the
crystal structure of TraR has also shown a dimerization domain present
at residues 4 to 11 at the extreme N terminus of this protein
(30,
34). The RhlR
4-117 deletion form was able to multimerize in an
autoinducer-independent fashion, indicating a second multimerization
site. Interestingly, the
4-117 deletion form of RhlR was
unable to transcriptionally activate the
lasB::lacZ lysogen. The inability
of the LexA(DBD)-RhlR
4-161 protein to multimerize
demonstrated that deletion of a larger portion of the N terminus may
have interrupted this second multimerization domain. Indeed, the
crystal structure of TraR showed a major dimerization domain present at
the C-terminal end of the N-terminal globular domain
(34). Interestingly, two
very similar N-terminal truncated forms of LasR (
4-160 and
4-172) both multimerized in an autoinducer-independent fashion
and both possessed transcriptional activity
(15). These results
implied that LasR and RhlR possess differences in their protein
structures. RhlR
179-239 demonstrated partial multimerization
ability in the presence of C4-HSL but was unable to activate
transcription of the lasB::lacZ
lysogen. These results implied that the autoinducer-binding portion of
RhlR is at the NH2-terminal end, whereas the C-terminal end
of RhlR possesses the transcriptional activation domain, similar to
other LuxR transcriptional regulator
homologs.
Domains of RhlR necessary for
C4-HSL binding.
The tritiated-autoinducer retention of
E. coli overexpressing LuxR, LasR, or RhlR has been
used to analyze autoinducer binding to the cognate transcriptional
regulator proteins (10,
16,
22,
24). To determine what
regions of RhlR participate in autoinducer binding, the six
LexA(DBD)-RhlR truncated forms were assessed for the ability to bind
[3H]C4-HSL (Fig.
5). As expected, the results indicated that the pSR658 vector control did
not bind [3H]C4-HSL and that the
full-length LexA(DBD)-RhlR fusion protein exhibited
[3H]C4-HSL binding. None of the
N-terminal truncated forms of RhlR bound
[3H]C4-HSL, and RhlR with a C-terminal
deletion of
179-239 demonstrated partial
[3H]C4-HSL binding. These data
confirmed that the autoinducer-binding domain of RhlR is present at the
N-terminal end of the protein. Interestingly, the
4-25
truncated form of RhlR was unable to bind
[3H]C4-HSL, whereas a
2-39
N-terminal truncated form of TraR retains its ability to bind its
cognate autoinducer,
N-(3-oxo-octanoyl)-L-homoserine lactone
(19), demonstrating
differences in autoinducer binding between the two proteins. As the
179-239 RhlR C-terminal truncated form was the only truncated
RhlR protein to demonstrate C4-HSL-dependent multimerization
(Fig. 4A) and also bind
[3H]C4-HSL, these data further support
our conclusion that C4-HSL binding is necessary for RhlR
multimerization.
![]() View larger version (15K): [in a new window] |
FIG. 5. [3H]C4-HSL
binding by the LexA(DBD)-RhlR truncated proteins. Shown is the
radioactivity remaining with E. coli DH5
expressing the pSR658 vector control, the full-length LexA(DBD)-RhlR
fusion protein, and the LexA(DBD)-RhlR truncated proteins following
incubation with [3H]C4-HSL.
Representative results from one independent assay are presented as the
average of triplicates plus the standard error of the
mean.
|
The Ala-44-Gly and Ser-135-Thr amino acid substitutions altered amino acids that might participate in autoinducer binding. The data indicated that the Ser-135-Thr mutant protein did not form multimers or transcriptionally activate the lasB::lacZ lysogen and that the Ala-44-Gly mutant protein did not form multimers or activate transcription as well as the wild-type LexA(DBD)-RhlR fusion (Fig. 6A and B). Luo et al. have also recently shown that an alanine-to-valine mutation of the corresponding amino acid of TraR demonstrated decreased autoinducer retention and also a reduction in the ability of TraR to dimerize or activate reporter expression (19). Of the amino acid substitutions that may participate in protein multimerization (Asp-12-Glu, Leu-162-Val, and Lys-196-Arg), only the Lys-196-Arg mutant protein demonstrated partial impairment of RhlR multimerization, suggesting that RhlR differs from TraR. Interestingly, the Lys-196-Arg mutant protein was unable to transcriptionally activate the lasB::lacZ lysogen. Since this site-specific mutation was generated at the C-terminal end of the protein near the hypothetical transcriptional activation domain of RhlR (residues 209 to 223 on the basis of homology to TraR), it may have disrupted the DNA-binding helix, leading to the loss of transcriptional activation abilities. The amino acid substitution in the interdomain linker (Leu-181-Val) demonstrated complete impairment in multimerization and activation abilities, and the two amino acid substitutions in the hypothetical transcriptional activation domain (Thr-211-Ser and Lys-222-Arg) demonstrated partial impairment of multimerization and complete impairment of the ability of RhlR to transcriptionally activate the lasB::lacZ lysogen.
![]() View larger version (44K): [in a new window] |
FIG. 6. Multimerization
and transcriptional activity of the LexA(DBD)-RhlR
site-specific mutant proteins. E. coli SU101
(A) and the E. coli MG4
lasB::lacZ lysogen (B)
carrying the pSR658 vector control, the full-length LexA(DBD)-RhlR
fusion protein, and the LexA(DBD)-RhlR site-specific mutant proteins
were grown in the presence of 0 ( ) or 50
(
0.05) between the samples grown in the absence or presence of
autoinducer is indicated by an
asterisk.
|
![]() View larger version (21K): [in a new window] |
FIG. 7. [3H]C4-HSL
binding by LexA(DBD)-RhlR mutant proteins. Shown is the radioactivity
remaining with E. coli DH5 expressing the
pSR658 vector control, the full-length LexA(DBD)-RhlR fusion protein,
and the indicated LexA(DBD)-RhlR site-specific mutant proteins
following incubation with [3H]C4-HSL.
Representative results combined from two independent assays are
presented as the average of six replicates plus the standard error of
the
mean.
|
Inhibition of wild-type RhlR in
P. aeruginosa.
It has previously been demonstrated
that the mutated LuxR, TraR, and LasR proteins interfere with the
function of their wild-type counterparts
(2,
15,
18). To determine if RhlR
functions as a multimer in vivo, the RhlR C-terminal deletion of amino
acids 179 to 239 and the Thr-211-Ser site-specific mutation, which
demonstrated multimerization but not transcriptional activation
capabilities, were expressed in wild-type P.
aeruginosa carrying an
rhlA::lacZ fusion
(13). If these proteins
multimerize with wild-type RhlR and inhibit its ability to
transcriptionally activate rhlA, then they will act as
dominant negative forms. Consequently, a decrease in
ß-galactosidase activity from the pEX1.8 control will be
observed. Figure
8 shows that the RhlR
179-239 C-terminal deletion and the RhlR
Thr-211-Ser site-specific mutation were able to inactivate wild-type
RhlR. Addition of 2 or 10 µM C4-HSL increased the
ß-galactosidase activity of the
rhlA::lacZ lysogen in both the
pEX1.8 control and experimental samples; however, in no case did the
activity from the experimental samples reach that of the pEX1.8
control. These results indicate that RhlR functions as a multimer in
P.
aeruginosa.
![]() View larger version (26K): [in a new window] |
FIG. 8. Inhibition
of wild-type RhlR in P. aeruginosa. Shown is the
PAO220 rhlA::lacZ fusion
expressing the pEX1.8 vector control ( ), pEX1.8 RhlR
179-239
(
|
4-117 deletion form of RhlR
multimerized in an autoinducer-independent fashion and was unable to
activate transcription, while similar deletion forms of LasR
(15) possessed both
multimerization and transcriptional activation abilities. These data
support previous suggestions that the P. aeruginosa
lasR and rhlR genes were not the result of a gene
duplication event and were acquired independently of each other
(9). With DNA microarrays, it was recently discovered that the las and rhl quorum-sensing systems can function as negative regulators (26, 32). It is still unknown if RhlR can directly down-regulate transcription or if the negative regulation is a downstream effect of RhlR-activated genes. If RhlR does directly function as a negative regulator, it will be interesting to determine if the multimer form of RhlR is necessary for it to down-regulate target gene expression, as is required to activate gene expression.
This work was supported by the National Science Foundation under a postdoctoral grant awarded in 2000 to J.R.L. (DBI-0074374) and by a National Institutes of Health research grant (AI133713) to B.H.I.
|
|
|---|
E). Proc. Natl. Acad. Sci.
USA92:7941-7945.
This article has been cited by other articles:
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Copyright © 2009 by the American Society for Microbiology. For an alternate route to Journals.ASM.org, visit: http://intl-journals.asm.org | More Info»