Previous Article | Next Article ![]()
Journal of Bacteriology, June 2004, p. 3525-3530, Vol. 186, No. 11
0021-9193/04/$08.00+0 DOI: 10.1128/JB.186.11.3525-3530.2004
Copyright © 2004, American Society for Microbiology. All Rights Reserved.
Peter Setlow,5 Abraham Minsky,1 and Sharon Grayer Wolf2*
Organic Chemistry,1 Chemical Research Support, The Weizmann Institute of Science, Rehovot 76100, Israel,2 Department of Physiology & Biophysics, Boston University School of Medicine, Boston, Massachusetts 02118,3 Department of Biology, University of Massachusetts, Amherst, Massachusetts 01003,4 Department of Biochemistry, University of Connecticut Health Center, Farmington, Connecticut 060325
Received 21 December 2003/ Accepted 20 February 2004
|
|
|---|
/ß-type small, acid-soluble spore proteins (SASP), plays a major role in mediating spore resistance. The mechanism by which these proteins exert their protective activity remains poorly understood, in part due to the lack of structural data on the DNA-SASP complex. By using cryoelectron microscopy, we have determined the structure of the helical complex formed between DNA and SspC, a characteristic member of the
/ß-type SASP family. The protein is found to fully coat the DNA, forming distinct protruding domains, and to modify DNA structure such that it adopts a 3.2-nm pitch. The protruding SspC motifs allow for interdigitation of adjacent DNA-SspC filaments into a tightly packed assembly of nucleoprotein helices. By effectively sequestering DNA molecules, this dense assembly of filaments is proposed to enhance and complement DNA protection obtained by DNA saturation with the
/ß-type SASP. |
|
|---|
Spore DNA protection from damaging effects of desiccation, heat, oxidizing agents, and UV irradiation has been shown to derive primarily from a group of
/ß-type small acid-soluble proteins (SASPs) (60 to 75 residues), termed
/ß-type SASP, which bind DNA in a nonspecific manner (5, 20, 29, 32). These
/ß-type SASPs accumulate during sporulation of Bacillus and Clostridium species to levels that are high enough to saturate spore DNA, and in all Bacillus species yet examined two proteins make up
80% of the
/ß-type SASP pool (32). The critical role of
/ß-type SASP in mediating spore DNA protection has been indicated by in vitro studies, as well as by the finding that spores lacking these proteins (termed
ß spores) are much more sensitive to DNA damage than are wild-type spores (16, 32). The attenuated resistance of
ß spores can be restored if these spores are provided with sufficient levels of any major or minor
/ß-type SASP, thus indicating that these proteins can complement each other. Indeed, amino acid sequences of all
/ß-type SASPs are highly conserved both within and between species (32, 33).
Although
/ß-type SASPs and their DNA-binding properties have been extensively studied, the actual mechanism by which these proteins confer DNA resistance remains poorly understood, mainly due to the lack of detailed structural data on DNA-SASP complexes. Circular dichroism spectroscopy of
/ß-type SASPs indicated that although these proteins adopt a random coil configuration in the absence of DNA, their secondary structure is dominated by
-helices upon binding to double-stranded DNA (10). High-resolution structural studies of the resulting complexes have heretofore been hampered by the large cooperative nature of the binding, as well as by the tendency of the nucleoprotein complexes to form massive aggregates (8).
Previous electron microscopy studies have shown a helical complex formed between DNA and SspC, a well-characterized representative member of the highly conserved
/ß-type SASP family (32), in which SspC binds cooperatively along the DNA (8). Such helical filaments are amenable to structural analysis by cryoelectron microscopy (cryoEM) techniques. Here we present the three-dimensional (3D) structure of the DNA-SspC complex determined by a modified version of the iterative helical real-space reconstruction (IHRSR) method that combines single-particle and helical-reconstruction techniques (3). A novel mode of nucleoprotein organization is identified, in which tight packaging of DNA-SspC filaments is mediated by interdigitation of protein domains from adjacent helices. By promoting DNA dehydration and enabling efficient DNA sequestration, this tight toroid-like assembly is proposed to extend protection of spore DNA beyond the level achieved by DNA saturation with SspC, as well as to facilitate DNA repair.
|
|
|---|
/ß-type SASP from Bacillus subtilis (32), was purified as described previously (9) from Escherichia coli BL21(DE3) containing plasmid pET11d that carries the sspC gene under control of the T7 promoter. DNA-SspC complexes were formed at a 10:1 (wt/wt) ratio (protein/DNA) in 10 mM Tris-maleate (pH 7.0), using pBluescript plasmid DNA (0.5 mg/ml) linearized with EcoRI. The protein/DNA ratio used in these experiments was approximately twofold higher than that needed for theoretical saturation of DNA with SASP, in order to ensure that DNA was saturated with the protein. Samples were incubated for 5 to 10 min at room temperature and deposited on glow-discharged Quantifoil grids. Specimens were embedded in 16% ammonium molybdate for cryonegative staining (1) and vitrified by plunging into liquid ethane. Images were recorded using low-dose cryo-conditions on Kodak SO163 plates either on a CM12 microscope operating at 100 kV and a magnification of x60,000 or on an FEI Tecnai 12 (T12) microscope operating at 120 kV and a magnification of x67,000. Image reconstruction. Electron micrographs were digitized with an Imacon FlexTightII scanner, at 16-bit dynamic range and 1,800 dpi (corresponding to 0.235 or 0.221 nm/pixel for images recorded on the CM12 or T12 microscope, respectively). Images from the T12 microscope were interpolated to 0.235 nm/pixel to allow data merging with images taken on the CM12 microscope. Electron micrographs were acquired at a defocus range of 500 nm to 3 µm, and prior to reconstruction, their phases were CTF (contrast transfer function) corrected. Image processing was conducted using the Spider software package (version 7.01) (6), except for the real-space helical search and reconstruction (IHRSR) method (3) that was performed with Fortran routines provided by E. Egelman and revised for application to DNA-SspC helical filaments. Helical segments (i.e., "particles") 16 nm in length were picked from 22 electron micrographs with 70% overlap, while preserving information on filament polarity and membership within filament groups. Particles were subsequently aligned to an initial smooth bipolar model with uniform densities that was constructed by assuming a 3.4-nm helical pitch and 5.5-nm filament width. No additional structural features were introduced.
Multireference alignment to this model was performed without restriction of rotational search. Subsequently, a search for helical symmetry was performed on the reconstruction, and an improved symmetrized 3D model served as reference for the next iteration. A stable solution converged after
60 iterations. At this point, a polarity was observed to have evolved in the model, so this solution was used as a reference for 10 further iterations, which established the explicit polarity of the filaments. This was performed by a "voting" procedure: after multireference alignment to the reference model projections, particles from each filament were grouped according to their polarity, compared to the model. The majority vote was checked for divergence from a binomial distribution, and only those groups with 90% confidence of divergence were added to the reconstruction. The final reconstruction included 2,224 particles, corresponding to
13,500 protein subunits and the length (25 µm) of the helical fiber. The resolution, as determined by Fourier shell correlation with a cutoff of 0.5 (27, 34), reached 1.1 nm. The computed transform of a projection from the final reconstruction exhibited layerline reflections up to 0.94 nm. The errors in the pitch and subunit/turn (= 211.75° ± 0.04° and z = 1.872 ± 0.03 nm, respectively) were calculated from the baseline noise in the refinement plots of helical parameters versus refinement cycle. The isosurface level of the reconstruction in all figures was chosen to be 0.5 standard deviation (SD) above the average background intensity.
The significance of the polarity observed in the final model was assessed in the following way. Two independent reconstructions (each using half of the data) were made after the last cycle of refinement. The reconstructions were helically symmetrized, and projections were calculated. The program HLXFIT from the Brandeis Helical Package (22) was used to compare the best phase matching obtained when the two reconstructions were oriented one to the other either in parallel or antiparallel orientations. Comparison of the four possible permutations (front and back sides of one reconstruction compared to those of the other) showed a highly significant preference for polar orientations (phase residual = 20.4° ± 2.6°) versus nonpolar orientations (62.9° ± 3.4°).
Docking of adjacent filaments. The program MolFit (4, 11) was used for docking analysis. An atomic representation of the electron microscopy-reconstructed electron density map was obtained by packing spheres into a 21.85-nm-long fragment of the DNA-SspC filament at the isosurface level described above. The electron density map for this fragment was calculated on a cubic grid with a 0.235-nm interval and converted to a list of "virtual atoms" whose centers were at the positions of the grid points.
Two search procedures were performed, starting with identical filaments either parallel or antiparallel to each other. During the search, one fiber was kept fixed while the other was allowed to rotate and translate about three perpendicular axes (the z axis coincided with the long axis of the filament) in steps of 10°. The translation interval was 0.1 nm in all search procedures. A full range of rotations was allowed for the z axis, but for the x and y axes only rotations of ±30° were allowed, producing 1,764 relative orientations. For each relative orientation, five docking solutions with the highest geometric complementarity score were saved. A high complementarity score indicates that surfaces align with minimal gaps and clashes. The mean score and SD were derived by fitting the observed distribution of scores to an extreme value distribution function (14). Local searches, at 1° intervals, were performed around the best parallel and antiparallel solutions. A third filament was then docked to the best two-filament antiparallel solution, employing identical translation and rotation intervals. This procedure resulted in the formation of 3D assemblies of filaments with both parallel and antiparallel contacts.
Thin-section transmission electron microscopy of bacterial spores. B. subtilis cultures were grown in Luria-Bertani medium at 30°C for 72 h. The resulting spores were harvested and transferred to cellulose capillaries (inner diameter, 200 µm). The samples were frozen in liquid nitrogen in a Balzers HPM 010 apparatus under a pressure of 2.1 x 108 Pa for 500 ms (estimated freezing time, 20 ms). Following cryofixation samples were cryo-substituted with anhydrous acetone containing1% OsO4. Samples were then embedded in Epon; thin sections were stained with 1% uranyl acetate and examined on a Philips CM12 electron microscope operating at 100 kV. Intracellular localization of DNA was performed with the DNA-specific stain osmium ammine-SO2 (36). Grid-mounted thin sections of Epon-embedded bacteria were floated on 5 N HCl for 30 min at room temperature, washed with distilled water, and treated with osmium ammine-B (Polysciences) in 8 N acetic acid and 40 mM sodium metabisulfite for 1 h at 37°C. Sections were then thoroughly rinsed with distilled water, dried, and studied without additional staining. Three independent experiments were conducted for each set of staining conditions, and in each experiment more than 1,000 cell slices were screened.
|
|
|---|
5.5 nm) and curved morphology of the ice-embedded DNA-SspC filaments imaged under low-dose conditions lead to particularly noisy images. In order to improve the signal-to-noise ratio, DNA-SspC filaments were imaged using the cryonegative staining technique (1). Filaments tended to aggregate into massive bundles and swirls (Fig. 1), as previously reported (8). Although the DNA-SspC complex is substantially stiffer than naked DNA, the filaments exhibited a highly curved morphology, thus preventing helical processing of segments longer than
95 nm. Collectively, these characteristics hampered the use of a classical helical-reconstruction approach. Therefore, we employed the IHRSR method (3). This method involves iterative cycles of a two-step process: multireference-based 3D reconstruction of helical segments (such as in Fig. 2A) using single-particle image-processing methods (with no symmetry imposed) followed by a search for helical symmetry in the resulting 3D model (see Materials and Methods).
![]() View larger version (100K): [in a new window] |
FIG. 1. Transmission electron microscopy of DNA-SspC complex. (A) Image of a typical toroidal aggregate formed by DNA-SspC filaments. Arrowheads point toward single filaments spreading out of the circle. (B) High magnification of a region from panel A, highlighting the tight packing of adjacent filaments. Scale bars are 50 nm (A) and 10 nm (B).
|
![]() View larger version (41K): [in a new window] |
FIG. 2. DNA-SspC 3D reconstruction. (A) Gallery of raw "particles" (helix sections) that have been aligned by rotation and translation. The last frame shows the average of all aligned particles belonging to one representative class from the reconstruction. (B and C) Surface representations of the initial model (B) and final reconstruction (C). (D) Slices through the reconstruction (perpendicular to the helical axis). Consecutive slices are separated by 0.235 nm and range over one helical subunit. Density values are contoured every 0.5 SD, where the outermost contour is 0.5 SD above the average background intensity.
|
Geometric docking of DNA-SASP filaments. DNA-SspC helical filaments were previously shown to form bundles and swirls in solution (8) (Fig. 1). In vivo, bundles must consist of both parallel and antiparallel orientations, because of the circular nature of the bacterial chromatin. We therefore investigated packaging of adjacent DNA-SspC filaments by geometrical docking (11) in both parallel and antiparallel orientations. The maximal score for parallel fitting was at 56° rotation about the filament (z) axis, 1° rotation about the perpendicular x axis, and no rotation around the y axis (Fig. 3C). The score of the best antiparallel solution was at 56° rotation about the filament (z) axis, and no rotation about the perpendicular (x and y) axes (Fig. 3D).
![]() View larger version (59K): [in a new window] |
FIG. 3. Geometrical docking of DNA-SspC filaments: 3D packaging of four adjacent DNA-SspC filaments. (A) Top view of the filaments. The purple filament forms antiparallel contacts with the other three. (B) Schematic top view showing how multiple filaments form a hexagon-like packing arrangement, with both antiparallel and parallel contacts between neighbors. (C) Shown are the same four filaments from panel A, where the orange, yellow, and green filaments make parallel contacts. (D) The purple filament makes antiparallel contacts with the green and orange filaments. (E) Contour plots of parallel (left) and antiparallel (right) geometrical docking score results. The color bar represents the complementarity score (arbitrary scale) in the range of the parallel and antiparallel solutions, where contour levels of 1 SD from the best solution are plotted every 0.25 SD.
|
DNA packaging in bacterial spores.
Previous studies indicated that chromatin in developing forespores, as well as in germinating spores of B. subtilis, adopts a tightly packed ring-shaped morphology (24, 25). Although the nucleoid structure in dormant spores was not determined due to the impermeability of the spore core to fixative and stains, it has been suggested that this tight toroidal organization is also present in dormant spores. We used cryofixation techniques and specific DNA staining methods in order to assess DNA structure in mature spores. Cryofixed B. subtilis spores exhibit layers consisting of thick lamellar coat, cortex, and inner membrane that engulf the inner core. Within this core, ribosomes that appear as darkly stained particles, as well as chromatin demarcated as ribosome-free regions, are detected (Fig. 4A and B). As indicated by a specific DNA staining method that was previously shown to be particularly effective for labeling condensed DNA regions (36), spore chromatin is localized in the periphery of the core, forming a tightly packed toroidal structure. Notably, a complete DNA toroid was observed in
15% of the spores. The other specimens revealed incomplete toroidal structures, as a portion of the toroid was sliced out in the thin sections probed in transmission electron microscopy.
![]() View larger version (103K): [in a new window] |
FIG. 4. Electron microscopy of dormant B. subtilis spores. (A) B. subtilis spore stained with uranyl acetate. The densely stained particles are ribosomes; ribosome-free spaces in the periphery of the spore core are indicated by arrows and contain chromatin. (B) Specific DNA staining of a dormant spore, which results in darkly stained DNA, highlights the toroid morphology of the chromatin. Since the sections probed are 70 nm thick, only a segment of the toroid can be detected. Scale bars, 200 nm. Dormant spores were prepared for transmission electron microscopy as described in Materials and Methods.
|
|
|
|---|
/ß-type SASP that are expressed in large amounts during spore formation (30). Due to the lack of structural data on the resulting DNA-SASP complex, many aspects of the mechanisms by which these conserved DNA-binding proteins promote DNA protection remain enigmatic.
Previous circular dichroism and Fourier transform infrared studies implied that binding of DNA to SspC, a characteristic member of the
/ß-type SASP family, promotes a conformational transition of DNA molecules from a B form to an A-like structure (19, 31). It was proposed that this major conformational modification underlies the ability of
/ß-type SASP to protect spore DNA, by substantially modulating DNA photochemistry (19, 31). It was also suggested that the change in DNA supercoiling detected following the interaction with SspC in vitro (20), as well as by DNA in spores (21), derives from the large alteration in the number of base pairs per helical turn that accompanies B-to-A DNA transition (31). Subsequent electron microscopy studies of DNA-SspC filaments indicated, however, that the length of DNA molecules, and hence the rise per base pair, are not significantly altered upon SspC binding, thus implying that DNA conformational state within the DNA-SspC complex remains similar to the canonical B form (8). Moreover, it has been shown that the altered photochemical properties of DNA molecules within DNA-SspC filaments cannot be straightforwardly ascribed to an A-like DNA conformation, but, at least partially, to DNA dehydration (23).
The structural analysis presented here indicates that DNA helical parameters sustain only minor conformational changes upon binding to SspC. The final structure reveals that the pitch (3.18 nm) remains close to that of canonical B-form DNA. These results raise the following question: what are the mechanisms responsible for DNA protection and the alteration of DNA supercoiling (20, 21)?
On the basis of our structural analysis, we propose that the quaternary organization of the DNA-SspC filaments plays an important role in mediating both DNA protection and the increased DNA supercoiling. Within this tight packaging, which derives from a near-to-perfect interdigitation of adjacent filaments, water content is substantially reduced. The attenuated water activity is likely to result in a decreased probability of formation of reactive oxidizing radicals as well as in altered DNA photochemical properties (23), whereby UV-induced production of thymine dimers is restricted. DNA molecules saturated with SspC appear to preferentially adopt a tightly packed toroidal conformation both in vitro (8) (Fig. 1) and in dormant spores (Fig. 4). This particular conformation is significant in light of the recent proposal according to which the exceptional resistance of the bacterium Deinococcus radiodurans towards irradiation and desiccation is promoted by the tight toroidal packaging of its genome (12). Within this rigid matrix, free DNA ends generated by double-stranded breaks are kept firmly together as a result of restricted diffusion, thus allowing for error-free repair through template-independent joining of DNA fragments through nonhomologous end joining (NHEJ). Notably, DNA repair through homologous recombination cannot occur in germinating spores because they regularly carry only one copy of their genome (2). As the ring-shaped organization of chromatin has been shown to persist upon spore germination for several hours (25), it is tempting to suggest that this tight morphology contributes to spore resistance by facilitating repair of double-stranded DNA breaks. Indeed, it has recently been proposed that NHEJ represents an important repair pathway of double-stranded DNA breaks in B. subtilis (36).
Within the 3D toroidal structure, both antiparallel and parallel contacts between adjacent DNA-SspC filaments are necessarily present because of the circularly closed conformation of bacterial chromosomes. Our geometric docking analysis indicates that the filaments pack in a particularly tight conformation when juxtaposed in an antiparallel geometry, whereas in the parallel configuration, lower spatial complementarity between adjacent filaments is observed (Fig. 3). The tight antiparallel contacts stabilize the assembly, thus compensating for the weaker parallel contacts. Due to the nonoptimal complementarity between adjacent DNA-SspC filaments that is imposed by the contribution of parallel contacts, it could be expected that DNA protection against small DNA-modifying agents would be less effective than that achieved against relatively bulky species such as nucleases. Indeed, the DNA-SspC complex has been shown to be as susceptible to small alkylating reagents as naked DNA (29, 30). The mechanism by which SspC protects DNA against formaldehyde (15) remains, however, enigmatic.
Our structural analysis further demonstrates that parallel interfilament contacts are less specific than antiparallel contacts, allowing for flexibility and a relatively large angular distribution (±4°) of packed DNA-SspC filaments. This larger conformational freedom may result in rearrangements of the filaments such that a higher spatial complementarity and hence a tighter, near-to-hexagonal packaging are obtained. These rearrangements, which are likely to entail winding of filaments around each other, would lead to DNA superhelical density within the complex by generating an overall twist. Notably, it has been previously shown that the supercoiling handedness exhibited by aggregates of closely packed chiral filaments is dictated by the chirality of these filaments (26). The unidirectional winding of DNA-SspC filaments, which is required to explain the SspC-induced effects on DNA supercoiling, is thus proposed to represent a direct outcome of the chiral nature of the filaments, combined with the drive to achieve the highest possible chromatin compactness.
We have previously shown that starved nonsporulating bacteria, as well as bacteria exposed to severe and prolonged DNA-damaging agents, protect their DNA complement through physical sequestration within tightly packed structures (7, 13, 37). In this study we demonstrate that the structure of sporal DNA-SspC filaments, in conjunction with their tight spatial organization, provides an effective means for a continuous protection of the spore chromosome. This protection is promoted by DNA saturation with SspC and the tight packaging of the resulting DNA-SspC filaments, as well as by the toroidal conformation of the spore genome. The toroidal structure may facilitate and promote DNA repair through NHEJ (36), by creating a relatively rigid matrix in which DNA fragments are kept together (12). The results support the notion that a protection and survival strategy that depends upon structural features is widespread among prokaryotes when exposed to prolonged periods of starvation and stress (17, 18).
We thank Ed Egelman for the IHRSR source code and David Morgan for his help in implementing the helical-reconstruction techniques.
Present address: Department of Biology, Massachusetts Institute of Technology, Cambridge, MA 02139. ![]()
|
|
|---|
/ß-type small, acid-soluble spore protein with DNA: protein binding is cooperative, stiffens the DNA, and induces negative supercoiling. Proc. Natl. Acad. Sci. USA 91:8224-8228.
/ß-type small, acid-soluble spore proteins from Bacillus species. J. Biol. Chem. 276:2267-2275.
/ß-type protect spores against this DNA damage. J. Appl. Microbiol. 87:8-14.[CrossRef][Medline]
/ß-type small, acid-soluble spore proteins: a new class of DNA-binding protein. J. Bacteriol. 174:2312-2322.
/ß type do not protect the DNA in Bacillus subtilis spores against base alkylation. Appl. Environ. Microbiol. 64:1958-1962.
This article has been cited by other articles:
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Copyright © 2009 by the American Society for Microbiology. For an alternate route to Journals.ASM.org, visit: http://intl-journals.asm.org | More Info»