Previous Article | Next Article ![]()
Journal of Bacteriology, September 2004, p. 5576-5584, Vol. 186, No. 17
0021-9193/04/$08.00+0 DOI: 10.1128/JB.186.17.5576-5584.2004
Copyright © 2004, American Society for Microbiology. All Rights Reserved.
and Wim G. Meijer*
Department of Industrial Microbiology, Conway Institute of Biomolecular and Biomedical Research, University College Dublin, Dublin, Ireland
Received 12 February 2004/ Accepted 29 April 2004
|
|
|---|
|
|
|---|
The expression of vapA is controlled by environmental parameters such as temperature, pH, oxidative stress, and the concentrations of calcium, iron, and magnesium, which reflect the conditions encountered by R. equi when it enters the host environment (2, 33, 38). To date, it remains unclear how these environmental signals are transduced to the transcriptional apparatus. The pathogenicity island contains two open reading frames (ORF4 and ORF8) that display a high degree of similarity to genes encoding transcriptional regulators. ORF4 encodes a protein belonging to the family of LysR-type transcriptional regulators (LTTR) and ORF8 encodes a response regulator which is part of a two-component regulatory system. LTTRs are present in a wide range of bacterial species and represent the largest family of prokaryotic transcriptional regulators (47). These proteins are involved in regulating a diverse range of cellular processes, including CO2 fixation (43), the oxidative stress response (6), and virulence (8, 10). The first crystal structure of a full-length LTTR was recently reported (28). The N-terminal DNA binding domains of LTTRs contain a helix-turn-helix motif that is required for binding to inverted repeats containing a thymidine and an adenine separated by 11 nucleotides (T-N11-A) (13, 35). The expression of LysR-encoding genes is often autoregulated, and they are divergently transcribed from the gene(s) that they control.
Since ORF4 is located within the pathogenicity island, it is likely that it is required for the expression of one or more genes located within this region of the virulence plasmid. The aim of this study was to determine whether the LTTR encoded by ORF4 is required for the expression of vapA. The transcriptional organization of vapA and the gene cluster containing ORF4 and ORF8 was determined, followed by mapping of the transcriptional start site of vapA. It was subsequently shown that the expression of vapA is dependent on the presence of the protein encoded by ORF4 (VirR) and that this protein binds adjacent to the vapA promoter.
|
|
|---|
(Bethesda Research Laboratories) and E. coli BL21(DE3) pLysE (Novagen) were used for general cloning procedures and for expression of the protein encoded by ORF4, respectively, (Table 1). Bacterial strains were grown in Luria-Bertani (LB) broth (34). When appropriate, the following supplements were added: kanamycin, 50 µg ml1 (E. coli) or 200 µg ml1 (R. equi); ampicillin, 50 µg ml1; chloramphenicol, 30 µg ml1; 5-bromo-4-chloro-3-indolyl-ß-D-galactopyranoside (X-Gal), 20 µg ml1; isopropyl-ß-D-thiogalactopyranoside (IPTG), 0.1 mM. For solid medium, agar was added to 1.5% (wt/vol). |
View this table: [in a new window] |
TABLE 1. Bacteria and plasmids used for this study
|
Plasmid construction. vapA and its promoter region were amplified with Deep Vent DNA polymerase and oligonucleotides PR600F and Takrev (Table 2). The product was ligated into the EcoRV site of pRE7 (48), yielding pR6VT.
|
View this table: [in a new window] |
TABLE 2. Oligonucleotide primers used for this study
|
pRvip10 was constructed as follows. ORF4 and its promoter region were amplified with Deep Vent DNA polymerase and oligonucleotides LYF and LYR (Table 2). The product was ligated into the EcoRV site of pBlueScript II KS, yielding pBlyFR2. The 1,867-bp NotI-NheI fragment from pBlyFR2 was ligated into NotI-NheI-digested pR6VT (Table 1).
pEDAR1012 was constructed by amplifying the promoter region of vapA with Deep Vent DNA polymerase and the oligonucleotides PR400F and 103R (Table 2). This product was ligated into EcoRV-digested pBluescript II KS.
pET3bvirRhis was constructed by amplifying the coding region of ORF4 with Deep Vent DNA polymerase and oligonucleotides LYSR-FORW and VIR-HIS (Table 2). This product was ligated into EcoRV-digested pBluescript II KS, yielding pBluevirRhis. The 931-bp NdeI-BamHI fragment from pBluevirRhis was ligated into NdeI-BamHI-digested pET3b (Novagen) (Table 1).
Electroporation of R. equi. R. equi was made electrocompetent by use of the method described by Zheng et al. (48); the pR6VT, pRvip10, and pForlan21 constructs were introduced into R. equi ATCC 33701 (P) by electroporation as previously described (27).
Overexpression and purification of VirR-his. E. coli BL21(DE3) harboring pLysE and pET3bvirRhis was grown at 28°C and 200 rpm in 400 ml of LB medium containing ampicillin and chloramphenicol. At an optical density at 650 nm of 0.5, IPTG was added to a final concentration of 1 mM and growth was continued for another 4 h. The cells were harvested by centrifugation at 4,100 x g and were resuspended in 16 ml of binding buffer (5 mM imidazole, 0.5 M NaCl, 20 mM Tris-HCl [pH -pH pH 7.9]) supplemented with 1 mM phenylmethylsulfonyl fluoride. The cells were broken by three passages through a French press at 1,000 lb/in2 (Aminco), and the cell debris was subsequently removed by centrifugation (25 min, 20,000 x g, 4°C). His-tagged VirR (VirR-his) was purified by the use of a His-Bind purification kit as described by the manufacturer (Novagen). Purified VirR was desalted with a HiTrap desalting column (Amersham Biosciences) equilibrated with electrophoretic mobility shift assay (EMSA) binding buffer (25 mM Tris-HCl [pH 7.5], 1 mM EDTA, 0.1 mM dithiothreitol [DTT], 50 mM KCl, 10% glycerol).
Preparation and labeling of DNA fragment used for EMSAs.
To obtain a radiolabeled DNA fragment containing the vapA promoter region, we digested pEDAR1012 with BglII and HindIII and labeled the resulting 262-bp DNA fragment with [
-32P]dATP (Perkin-Elmer) in a mixture containing 50 ng of DNA, 100 µM dCTP, 100 µM dGTP, 100 µM dTTP, 5 µCi of [
-32P]dATP, 2 U of Klenow DNA polymerase (Promega), 50 mM Tris-HCl (pH 7.2), 10 mM MgSO4, and 0.1 mM DTT which was then incubated at 30°C for 30 min. The reaction was stopped by the addition of 25 mM EDTA. The labeled fragment was purified by use of a Qiaquick PCR purification kit according to the manufacturer's instructions (Qiagen).
EMSA. Radiolabeled DNA fragments (2 ng) were incubated with purified VirR-his at 30°C for 30 min in EMSA binding buffer, 20 µg of bovine serum albumin, and 1 µg of poly(dI-dC) DNA (Amersham Biosciences) in a volume of 20 µl. The samples were separated by electrophoresis in a prerun 5% nondenaturing polyacrylamide gel containing TBE (45 mM Tris base, 45 mM boric acid, 1 mM EDTA) and run at 4°C and 10 V cm1. After drying, the gel was analyzed by autoradiography.
RNA isolation. Total bacterial RNA was isolated from a 4-ml culture grown to mid-logarithmic phase (optical density at 610 nm, 0.25) and harvested by centrifugation for 45 s at 20,000 x g at 4°C. The cells were resuspended in 1 ml of RLT buffer (RNeasy mini kit; Qiagen) and added to 0.5 ml of DEPC-treated 0.1-mm-diameter zirconia-silica beads (BioSpec). The samples were lysed for 2 min with a Ribolyser (Hybaid) at a speed setting of 6.5. Total RNA was isolated by the use of an RNeasy RNA mini kit (Qiagen) according to the manufacturer's instructions, except that a 60-min on-column DNA digestion with 60 U of RNase-free DNase I (Qiagen) was performed. After elution, 4 U of DNA-free DNase was incubated with 5 µg of total RNA according to the manufacturer's instructions (Ambion).
Fluorescent primer extension and DNA sequencing. A Cy5-labeled oligonucleotide, CY5VAPA200R (Table 2), complementary to the sequence 113 to 131 bp downstream from the initiation codon of the vapA gene was used in primer extension reactions. Total RNA (5 µg) and 1 µM CY5VAPA200R (Table 2) were incubated at 70°C for 5 min, followed by reverse transcription (RT) at 42°C for 60 min with 5 U of Improm-II reverse transcriptase in a volume of 100 µl as recommended by the manufacturer (Promega). After treatment of the sample with 20 µg of RNase A at 37°C for 30 min, the cDNA was precipitated and dissolved in 12 µl of nuclease-free water. The primer extension product (0.5 ng) was combined with 0.5 µl of the DNA size standard kit-600 (Beckman Coulter) and 40 µl of CEQ sample loading solution (Beckman Coulter) and analyzed with the CEQ 8000 fragment analysis system on a CEQ 8000 DNA sequencer (Beckman Coulter). In addition, a dideoxy sequencing reaction containing VAPA200R (Table 2) and 60 ng of EcoRV-digested pRvip10 (Table 1) was performed by the use of a CEQ DCTS kit as described by the manufacturer (Beckman Coulter). The Cy5-labeled primer extension product (50 pg) was added to the sample prior to analysis of the sequence with a CEQ 8000 DNA sequencer.
RT-PCR. Total RNA (1 µg) was used for the synthesis of cDNA with 0.5 µg of random hexamers (Promega) and 1 U of ImProm-II reverse transcriptase (Promega) used according to the manufacturer's instructions. One-tenth of the reaction mixture was used as a template for PCR amplification with Taq DNA polymerase (Promega) as described by the manufacturer. The oligonucleotides utilized for PCR amplification are listed in Table 2.
Extraction of cellular proteins. Cells were harvested in late-logarithmic phase by centrifugation (10 min, 4,000 x g, 4°C) and resuspended in 10 mM Tris-HCl (pH 8.0) and 1 mM EDTA. The cells were broken by three passages through a French pressure cell (Aminco) at 1,000 lb/in2, followed by centrifugation (10 min, 14,000 x g, 4°C) to remove cell debris.
Western blot analysis. Cell extracts were boiled for 5 min in a sodium dodecyl sulfate (SDS) solution (62.5 mM Tris-HCl [pH 6.8], 10% [vol/vol] glycerol, 2% [wt/vol] SDS, 5% [vol/vol] 2-mercaptoethanol, 0.02% [wt/vol] bromophenol blue). SDS-polyacrylamide gel electrophoresis was performed on a 15% polyacrylamide gel by the method of Laemmli (26). After electrophoresis, the proteins were transferred to a polyvinylidene difluoride membrane (Immobilon-P; Millipore) according to the manufacturer's instructions. Immunoblot analysis was performed with a chemiluminescence Western blot analysis system (Lumi-Light Western blotting substrate; Roche). A monoclonal antibody against VapA (Mab103, provided by S. Takai) was used for immunoblotting procedures.
Northern hybridization. After electrophoresis in a denaturing formaldehyde gel (34), RNAs were transferred to a positively charged membrane according to the manufacturer's instructions (Roche). The vapA probe used for Northern blot analysis was synthesized with the oligonucleotides Vap1 and Vap2 (Table 2) and Taq DNA polymerase (Promega) in the presence of a 0.2 mM concentration (each) of dATP, dCTP, and dGTP; 0.13 mM dTTP; and 0.07 mM digoxigenin 11-dUTP. The reaction mixture was incubated at 94°C for 2 min and was subsequently subjected to 30 cycles of 94°C for 30 s, 50°C for 45 s, and 74°C for 1 min, followed by an incubation at 74°C for 7 min. Prehybridization, hybridization, and chemiluminescent detection of the labeled probe with DIG Easy Hyb and CDP-Star kits (Roche) were done according to the manufacturer's recommendations.
|
|
|---|
The spacing between ORF4 and ORF5 is 493 bp in the original annotation of the virulence plasmid, with the initiation codon of ORF5 being an ATG at nucleotide 6322. However, a careful inspection of ORF5 indicated that the true initiation codon of this ORF is more likely to be a GTG at position 5947. The protein encoded by the revised ORF5 displays a high degree of similarity with transport proteins belonging to the major facilitator superfamily, in particular to proteins belonging to the arabinose efflux permease family (COG2814).
Two base pairs downstream of ORF8 is a region (nucleotides 9295 to 9692) that displays similarity to genes encoding the VapA protein family. This ORF starts at position 9295 of the virulence plasmid but is interrupted by a stop codon at position 9544 and contains a 1 frame shift at position 9630. It is therefore a pseudogene, similar to vapF, which contains two frameshift mutations. Furthermore, as is the case for vapF, the vap pseudogene downstream of ORF8 lacks a signal sequence. When corrected for the presence of the stop codon and the frame shift, the hypothetical protein encoded by this pseudogene is most similar to vapE.
The ORF4-8 cluster is cotranscribed. An analysis of the nucleotide sequence of the pathogenicity island indicated that ORF4 to ORF8 may form a polycistronic operon. These five ORFs are transcribed in the same direction and are separated from each other by a maximum of 136 bp (ORF5 and ORF6) and a minimum of 57 bp (ORF6 and ORF7). To determine the transcriptional organization of this region, we performed RT-PCRs with oligonucleotide pairs (Table 2) complementary to adjacent ORFs to span each gene junction (Fig. 1A). Reverse transcriptase-dependent amplification generated products of the predicted sizes from oligonucleotide pairs complementary to the following genes: ORF4-ORF5, ORF5-ORF6, ORF6-ORF7, and ORF7-ORF8 (Fig. 1B). These results showed that ORF4 to ORF8 are transcribed as a single message, showing that this cluster is an operon which is transcribed from a promoter located between ORF3 and ORF4. As expected, RT-PCR products were not observed when we used oligonucleotide pairs complementary to ORF3 and ORF4, nor were any observed when we used oligonucleotides complementary to ORF8 and ORF9. RT-PCR products were not observed when reverse transcriptase was omitted from the reaction mixture.
![]() View larger version (45K): [in a new window] |
FIG. 1. Transcriptional organization of virR gene cluster. (A) Genetic organization of DNA region harboring ORF3 to ORF9. The arrow above the map denotes the direction of transcription of the polycistronic message. Arrows below the illustration indicate oligonucleotide primers used for RT-PCR. (B) Results of RT-PCR analyses. Each oligonucleotide pair was used in three amplification reactions, with 2 µl of the reverse transcriptase-containing reaction (cDNA), without reverse transcriptase (RT), and with R. equi ATCC 33701 genomic DNA (DNA). The oligonucleotide pairs used were 003R and 004R (i), 004F and 005R (ii), 005F and 006R (iii), 006F and 007NR (iv), 007NF and 008R (v), and 008F and 009R (vi). The size of each band is indicated.
|
hrdB promoter (10, TAGART; 35, TTGaCA) of Streptomyces coelicolor (21, 36).
![]() View larger version (27K): [in a new window] |
FIG. 2. Determination of vapA transcriptional start site in R. equi ATCC 33701. Fluorescent primer extension was performed with the Cy5-labeled primer CY5VAPA200R and 5 µg of total cellular RNA extracted from R. equi grown under vapA-inducing conditions (37°C, pH 6.5). CY5VAPA200R is complementary to a sequence 131 bp downstream from the vapA initiation codon. (A) Cy5-labeled primer extension product combined with DNA size standards and analyzed with the CEQ 8000 fragment analysis system. (B) Nucleotide sequence obtained by using VAPA200R. A dideoxy sequencing reaction mix was spiked with the Cy5-labeled primer extension product. The arrow indicates the transcriptional start site where the Cy5-labeled cDNA and the sequencing product overlapped. (C) Sequence of vapA promoter region. The transcriptional start site (+1) and putative 10 and 35 regions are boxed, and putative LysR motifs (T-N11-A) are indicated with brackets.
|
![]() View larger version (39K): [in a new window] |
FIG. 3. Effect of virR and the virR operon on expression of vapA. The expression of VapA was determined by Western blotting with VapA monoclonal antibodies. (A) Lanes 1 and 2, R. equi wild-type strain grown at 37°C and pH 6.5 (lane 1) and at 30°C and pH 8.0 (lane 2); lanes 3 and 4, R. equi (P) harboring pRvip10 (virR vapA) grown at 37°C and pH 6.5 (lane 3) and at 30°C and pH 8.0 (lane 4); lane 5, R. equi (P) grown at 37°C and pH 6.5. Each lane was loaded with 2 µg of protein. (B) Lanes 1 and 2, R. equi wild-type strain grown at 37°C and pH 6.5 (lane 1) and at 30°C and pH 8.0 (lane 2); lanes 4 and 5, R. equi (P) harboring pForlan21 (virR operon and vapA) grown at 37°C and pH 6.5 (lane 4) and at 30°C and pH 8.0 (lane 5); lane 3, R. equi (P) grown at 37°C and pH 6.5. Each lane was loaded with 2 µg of protein.
|
![]() View larger version (54K): [in a new window] |
FIG. 4. Coomassie brilliant blue-stained denaturing polyacrylamide gel showing cell extracts of E. coli BL21 harboring pET3b (lane 1) or pET3bvirRhis (lane 2). VirR-His was purified by Ni2+ affinity chromatography (lane 3). The sizes of the molecular mass standards are shown in kilodaltons (lane 4).
|
![]() View larger version (105K): [in a new window] |
FIG. 5. EMSA analysis of VirR binding to the vapA promoter region. Various concentrations of VirR were incubated with 2 ng of radiolabeled DNA (262 bp) containing the vapA promoter region. The amount of protein added to each lane was as follows: lane 1, radiolabeled DNA fragment only; lane 2, 50 ng; lane 3, 100 ng; lane 4, 200 ng; lane 5, 300 ng; and lane 6, 400 ng. Protein-DNA complexes are indicated with black arrows. Nonbound DNA is indicated with a gray arrow.
|
LTTRs generally bind to degenerate inverted repeats that have a T-N11-A motif at their core (35). An inspection of the sequence upstream of the vapA transcriptional start site revealed six T-N11-A motifs. Two of these which are on the same side of the DNA helix and are centered at 43 and 64 occur adjacent to the 35 region (Fig. 2C).
|
|
|---|
The majority of LTTR-encoding genes are monocistronic and are transcribed divergently from the genes under their control (18, 25, 30). In contrast, the virR gene is cotranscribed with four other genes located downstream from virR. Although this is an unusual configuration, it is not unprecedented. CatR, an LTTR of the actinomycete Streptomyces setonii, was shown to be translationally coupled to two downstream genes required for the metabolism of aromatic compounds (31). The Mycobacterium tuberculosis genome contains five LTTR genes; one of these, Rv3678c, is transcribed in the same direction as the downstream Rv3677c gene (7). Since the spacing between these genes is only six nucleotides, it is extremely likely that these too are cotranscribed. In both instances, the first gene of these putative operons is the LTTR gene, as is the case for virR. The significance of this, if any, remains to be established.
The transcriptional start site of vapA in R. equi ATCC 33701 was determined to be 226 bp upstream of the initiation codon of vapA. The induction of vapA transcription either by incubation at a high temperature and a low pH or by exposure to H2O2 gave rise to the same transcriptional start site, indicating that vapA is transcribed from a single identical promoter under these conditions. The long 5' untranslated region (5'-UTR) of vapA may serve several functions. 5'-UTRs are frequently involved in stabilization of the downstream mRNA, as is the case for the cryIIIA toxin gene of Bacillus thuringiensis (1) and ompA of E. coli (5). The prfA gene of Listeria monocytogenes encodes a transcriptional regulator that activates the transcription of virulence genes. Similar to the case for vapA, the expression of virulence genes in L. monocytogenes is controlled by temperature, with high expression levels at 37°C, not at 30°C. It was recently shown that this temperature-dependent expression of virulence genes is controlled by the 5'-UTR of prfA. At 37°C, the structure of the 5'-UTR of prfA unfolds, exposing the ribosome binding site of this gene and allowing translation to initiate (20). The function of the 5'-UTR of vapA remains to be established.
The fact that purified VirR binds to a DNA fragment containing the vapA promoter strongly suggests that this protein activates vapA transcription by a direct interaction with RNA polymerase bound to the vapA promoter. At lower VirR concentrations, a single band shift was observed in band shift assays, whereas a second band shift became apparent at higher VirR concentrations. This has been observed in DNA binding studies of other LTTRs. For example, CbbR, an LTTR that controls the expression of CO2 fixation genes in Xanthobacter flavus, binds as a dimer to a promoter-distal high-affinity binding site, giving rise to a band shift with a high mobility. A second CbbR dimer is subsequently recruited by cooperative binding to a promoter-proximal low-affinity binding site, leading to the formation of a second DNA-protein complex with a lower mobility (44, 45). Whether a similar scenario is true for VirR remains to be established.
Although VirR is required for vapA expression, it is not sufficient to express vapA to wild-type levels. The introduction of the complete virR operon, together with vapA, in a virulence plasmid-free strain did lead to wild-type levels of VapA protein, as judged by Western blotting. The VirR operon contains four additional genes. One of these, vapH (ORF6), is a vapA homologue. The observed increase in vapA expression was not due to a cross reaction of the VapA monoclonal antibody, which is specific for VapA, with VapH (4). The most likely explanation for the increased expression of vapA is the presence of ORF8, which encodes a two-component response regulator. The virulence plasmid does not encode a sensor kinase, suggesting that the response regulator encoded by ORF8 interacts with a chromosomally encoded sensor kinase. In recent years, there have been several reports of genes regulated by both LTTRs and response regulators. In E. coli, the LTTR NhaR and the response regulator RcsB were shown to directly but independently regulate the osmC gene (37), while LhrA, a LysR homologue, was found to be involved with the response regulator SprE in a pathway promoting the degradation of the global regulator RpoS (11).
The present study shows that the LTTR VirR is required for transcription of the vapA gene. Whether this protein is also required for the expression of other genes located in the pathogenicity island and whether the response regulator is indeed involved in controlling the expression of vapA are currently being studied in our laboratory.
We thank Shinji Takai for providing R. equi ATCC 33701 (P) and VapA monoclonal antibodies and John Prescott for making pRE7 available.
Present address: Forensic Science Laboratory, Department of Justice Equality and Law Reform, Garda Headquarters, Dublin 8, Ireland. ![]()
|
|
|---|
This article has been cited by other articles:
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Copyright © 2009 by the American Society for Microbiology. For an alternate route to Journals.ASM.org, visit: http://intl-journals.asm.org | More Info»