Previous Article | Next Article ![]()
Journal of Bacteriology, September 2004, p. 5782-5789, Vol. 186, No. 17
0021-9193/04/$08.00+0 DOI: 10.1128/JB.186.17.5782-5789.2004
Copyright © 2004, American Society for Microbiology. All Rights Reserved.
Department of Molecular Microbiology and Biotechnology, Tel-Aviv University, Ramat Aviv,1 Department of Biological Chemistry, The Weizmann Institute of Science, Rehovot,2 Department of Biotechnology and Food Engineering and Institute of Catalysis Science and Technology, Technion-Israel Institute of Technology, Haifa, Israel3
Received 21 April 2004/ Accepted 2 June 2004
|
|
|---|
30-residue linkers separate cohesin 2 from 3 and cohesin 3 from the SLH module. The presence of an SLH module in ScaD indicates its role as an anchoring protein. The first two ScaD cohesins can be classified as type II, similar to the four cohesins of ScaB. Surprisingly, the third ScaD cohesin belongs to the type I cohesins, like the seven ScaA cohesins. ScaD is the first scaffoldin to be described that contains divergent types of cohesins as integral parts of the polypeptide chain. The recognition properties among selected recombinant cohesins and dockerins from the different scaffoldins of the gene cluster were investigated by affinity blotting. The results indicated that the divergent types of ScaD cohesins also differ in their preference of dockerins. ScaD thus plays a dual role, both as a primary scaffoldin, capable of direct incorporation of a single dockerin-borne enzyme, and as a secondary scaffoldin that anchors the major primary scaffoldin, ScaA and its complement of enzymes to the cell surface. |
|
|---|
In Clostridium thermocellum, the first cellulosome to have been described, the scaffoldin gene product (CipA) is located in a gene cluster (24) which also includes a series of genes that encode cohesin-containing anchoring proteins downstream of CipA. These anchoring proteins contain one or more cohesins and a C-terminal S-layer homology (SLH) module that mediates attachment to the cell surface (21). In contrast to the arrangement of the gene cluster in C. thermocellum, for other cellulosome-producing species, such as Clostridium cellulolyticum and Clostridium cellulovorans, gene clusters that comprise a series of genes coding for cellulosomal (dockerin-containing) enzymes instead of anchoring proteins have been described (2, 11, 19, 53). The difference between the scaffoldins of the latter bacteria and those of C. thermocellum is the presence of a distinctive dockerin on CipA, which is lacking on the other scaffoldin species. The CipA dockerin is known to interact with the cohesins of the anchoring proteins, and the complex is thus bound to the cell surface (36, 49, 50).
We have recently described the upstream portion of a gene cluster in the cellulosome-producing, anaerobic mesophile Acetivibrio cellulolyticus. The cluster included a gene coding for a novel scaffoldin, CipV (15), which was subsequently renamed scaA, followed downstream by two tandem genes, scaB and scaC (57). Like CipA of C. thermocellum (25), the A. cellulolyticus scaA scaffoldin contained a C-terminal dockerin domain. This suggested that the gene cluster would resemble the multiple-scaffoldin model observed for C. thermocellum. Indeed, ScaA binds to ScaB, which in turn binds to ScaC via successive cohesin-dockerin interactions, and the multiple cohesins on each of the latter scaffoldins indicates an amplification of the number of enzymes that can be incorporated into the A. cellulolyticus cellulosome (57). Since ScaC contains a resident SLH module, the entire complex would be anchored to the cell surface.
In the present study, we succeeded in completing the sequence of the final gene of the A. cellulolyticus cluster, scaD. The three scaD cohesins are of two different structural types and exhibit divergent specificities. Like scaC, scaD was also found to contain C-terminal segments encoding an SLH module, and hence the respective gene product would presumably act as anchoring protein. The data indicate that the A. cellulolyticus cell surface cellulosome system is characterized by at least two alternative suprastructural arrangements.
|
|
|---|
Scanning electron microscopy. Cells were treated with cationized ferritin prior to examination by electron microscopy as described previously (30, 31).
Isolation of genomic DNA and construction of genomic libraries. A. cellulolyticus genomic libraries were constructed by using the Lambda ZAP II undigested vector kit for an XbaI library and the Uni-ZAP XR vector kit for an EcoRI-XhoI library, according to the manufacturer's instructions (Stratagene Cloning Systems, La Jolla, Calif.).
PCR and subcloning. PCRs were performed by using a Master Personal device (Eppendorf, Hamburg, Germany) at various annealing temperatures (50 to 60°C). DNA samples were purified by using either a QIAquick PCR purification kit (Qiagen Inc., Valencia, Calif.), or an agarose gel DNA extraction kit (Roche Diagnostics Corp., Indianapolis, Ind.). Plasmids were purified by using the High Puri plasmid isolation kit (Boehringer, Mannheim, Germany). PCR fragments were cloned by using the pGEM-T vector system 1 (Promega Corp., Madison, Wis.). Escherichia coli TG1 or XL-1 strains were used as host cells for transformation.
Library screening.
Two A. cellulolyticus genomic libraries were screened according to the protocol described in the DIG Application Manual for Filter Hybridization (Roche Molecular Biochemicals). For EcoRI-XhoI library screening, a PCR fragment of 450 bp from primers ACAnF15 and ACAnR13 (Table 1) was labeled and used as a probe. A positive plaque was identified and transferred to the phagemid, and the resulting 6-kb insert was sequenced. This insert contained the terminal portion of scaB, the entire scaC reading frame, and the beginning of a new reading frame (57). Another XbaI library was screened in order to sequence additional portions downstream of scaC. For screening of the XbaI library, a 260-bp PCR product was prepared from primers F-AC-ScaD-1 and R-AC-ScaD-1 (see Table 1 for details). The
10-kb insert was obtained from positive plaques, and the 4-kb C-terminal portion was sequenced. The residual 6-kb N-terminal segment was already known from a previous report (57).
|
View this table: [in a new window] |
TABLE 1. Primers used in this study
|
Cloning and overexpression of recombinant proteins. Desired genes were subcloned into appropriate expression vectors via PCR (see Fig. 1 for details). Either pET28a or pET9d vectors were used for cloning the PCR products, and their intact sequences were verified by DNA sequencing. Cohesin constructs and xylanase fused with the GH9B dockerin were expressed in E. coli BL21(DE3), and xylanase fused to the ScaA or ScaB dockerin were expressed in E. coli BL21(DE3)(pLyS) (Stratagene) (Table 2). The host cells were grown in the presence of 0.1 mM isopropyl-ß-D-thiogalactopyranoside (IPTG) at either 37 or 16°C. Following growth, the cultures were lysed by sonication as described by Ding et al. (17). The expressed proteins were identified by sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) (10 or 12% polyacrylamide) and stained with Coomassie brilliant blue.
![]() View larger version (8K): [in a new window] |
FIG. 1. Organization of the A. cellulolyticus cellulosome-integrating cluster. (A) Arrangement of the four scaffoldin genes, bordered upstream by a putative cellobiose phosphorylase gene (cep) and downstream by a putative nucleotide methylase gene (nme). Immediately downstream of scaA, scaC, and scaD are located putative transcription terminators (hairpin loops), designated by lollipop-like symbols. (B) The scaD gene was sequenced in this work. The scaD gene encodes a protein containing a signal peptide (crosshatched), three cohesins (numbered), and a C-terminal SLH module. The modules of ScaD are all separated by well-defined Pro/Thr-rich linker segments (black boxes).
|
|
View this table: [in a new window] |
TABLE 2. Expressed proteins prepared in this study
|
Protein sequence analysis.
Potential signal sequences were determined with the SignalP version 2.0 program (44). The parameters for molecular weight, theoretical pI, amino acid composition, and extinction coefficient were computed by using the ProtParam Tool (http://www.expasy.org/tools/protparam.html), available via the SWISS-PROT website (3). Identification of protein sequences was performed with the Basic Local Alignment Search Tool (BLAST) (1), available on the website of the National Center for Biotechnology Information (protein-protein BLAST [blastp: http://www.ncbi.nlm.nih.gov/BLAST/]). Multiple-sequence alignments and phylogenetic trees were generated by using the ClustalW program (http://www2.ebi.ac.uk/clustalw/) (26). Sequences for cohesin and SLH modules were obtained from the GenBank website (http://www.ncbi.nlm.nih.gov/) or via the Carbohydrate-Active Enzymes server (CAZy website, http://afmb.cnrs-mrs.fr/
pedro/CAZY/db.html), designed by Coutinho and Henrissat (12, 14). The ScaD cohesins were mapped on a background of cohesin modules, as previously described (15, 16, 57). The sequences used to generate the tree for the SLH modules are given in Table 3. Secondary structures of the Thr-rich linker sequences were predicted by using the PredictProtein server at Columbia University (http://cubic.bioc.columbia.edu/predictprotein/).
|
View this table: [in a new window] |
TABLE 3. SLH-containing proteins cited in this work.
|
|
|
|---|
A new reading frame was detected downstream of the scaD stop codon; the gene was sequenced in its entirety, and the product was identified as a putative nucleic acid methylase on the basis of a BLAST search. Most (1.6 kb) of the 2.7-kb intergenic segment was sequenced in straightforward fashion without detection of additional reading frames (the residual 1.1-kb segment was considered inconsequential for the purposes of the present report).
At a distance of 3 kb, upstream of the scaA gene, a 600-bp fragment was sequenced and found by a BLAST search to unambiguously (
85% identity) represent a gene encoding a cellobiose phosphorylase (cep). A segment of only about 150 bp remained unaccountable, on the basis of the size of the highly conserved cep genes, together with the position of its 600-bp fragment and the previously sequenced 780-bp portion immediately upstream of scaA (15). Thus, no new open reading frames would exist between cep and scaA.
Sequence analysis of the scaffoldin gene cluster from A. cellulolyticus.
Sequence analyses of the scaffoldin gene cluster reveal that the genes are organized in three putative transcriptional units. The scaA gene (cipV) is the first transcriptional unit, with a potential 35 region (TTGTTT) and a 10 region (TATTAA) upstream of the gene. Downstream of the scaA gene, two other genes (scaB and scaC) are oriented in the same direction without any obvious transcriptional initiation signals or transcriptional terminators separating them. A potential promoter upstream of the scaB gene includes a 35 region (TTGGAG), separated by 17 bp from a 10 region (CATAAA), with four out of six bases matching the
A consensus sequence. Downstream of the scaC gene there is a palindromic sequence, corresponding to an mRNA hairpin loop, followed by a clear stretch of T nucleotides, typical of a Rho-independent terminator. Thus, it is likely that scaB and scaC together constitute a second transcriptional unit. The third transcriptional unit is probably monocistronic and encodes the scaD gene. Upstream of the gene is a potential promoter region (5'-TTGTCA...16 bp...CTTAAT-3'), and downstream of the scaD stop codon is a potential Rho-independent transcriptional terminator.
Description of ScaD. The modular architecture of scaD is shown in Fig. 1B. The scaD gene encodes an 852-residue protein that includes a signal peptide, three cohesins, and a C-terminal SLH module. The predicted scaD signal peptide cleavage site is located between residues 27 and 28 (VNA-SD). The predicted molecular weight of the mature ScaD is 88,960, and the calculated pI of the unfolded polypeptide is 6.59. The three cohesins and SLH module are separated by Pro/Thr-rich linker sequences of 67, 30, and 32 residues, respectively. Like ScaC, ScaD likely serves as an anchoring protein, owing to its SLH module. The nature of the ScaD cohesins is of particular interest. As illustrated in Fig. 2, the first two are similar to the type II cohesins of ScaB (57) and to those of the C. thermocellum anchoring proteins (33, 34, 36, 48) and the Bacteroides cellulosolvens CipBc scaffoldin (16). In contrast, the third ScaD cohesin maps within the type I cohesins, in a position close to those of ScaA (15). ScaD is the first case of a single scaffoldin that carries different types of cohesins.
![]() View larger version (36K): [in a new window] |
FIG. 2. Phylogenetic analysis of the A. cellulolyticus ScaD cohesins. The first two ScaD cohesins map together with the ScaB cohesins on a separate branch of the type II cohesins, radiating from approximately the same bifurcation point. In contrast, the third ScaD cohesin is clearly a member of the type I cohesins, closely aligned to the seven type I cohesins of ScaA. The scale bar indicates the percentage (0.1) of amino acid substitutions. Sources for sequences used in this figure are provided in references 15, 16, 46, and 56.
|
Affinity blotting experiments indicated that the ScaD cohesin 1 probe (CohD1) recognized selectively the high-molecular-mass ScaA band in the supernatant fraction (Fig. 3). The observed labeling appeared to be identical to that determined earlier with ScaB cohesin 1 as a probe (57). The evidence thus suggests that the four ScaB cohesins and the first two ScaD cohesins all recognize the ScaA dockerin. The results were corroborated by using a xylanase-dockerin fusion protein system (A. Mechaly, Y. Barak, T. Handelsman, et al., unpublished results), whereby the CohD1 probe labeled the xylanase hybrid construct containing the dockerin of ScaA but not those of ScaB or the enzyme-borne dockerin (Fig. 4).
![]() View larger version (49K): [in a new window] |
FIG. 3. Affinity blotting of cell-derived proteins, using representative recombinant ScaD cohesins as probes. A. cellulolyticus cells were grown on cellobiose and pelleted, and the supernatant fraction was adsorbed onto phosphoric acid-treated cellulose. Samples were subjected to SDS-PAGE (Gel), and blotted onto nitrocellulose membranes (Blots). Gels were stained with Coomassie brilliant blue. The blots were probed with the designated recombinant protein sample, and labeled bands were detected by chemiluminescence with peroxidase-conjugated, anti-His tag antibody. Probes: CohD1, the first cohesin of ScaD; CohD3, the third cohesin of ScaD. Std, prestained molecular weight markers (in thousands). Sup, original sample of extracellular protein, adsorbed onto cellulose.
|
![]() View larger version (53K): [in a new window] |
FIG. 4. Affinity blotting of selected dockerin-containing fusion proteins with the two types of recombinant ScaD cohesins. Recombinant fusion proteins, comprising Geobacillus stearothermophilus xylanase T6 and C-terminal dockerins from ScaA (DocA), ScaB (DocB), or the cellulosomal GH9B enzyme (DocGH9), were expressed in an appropriate E. coli host cell system. The 50-kDa Xyn-Doc fusion proteins were subjected to SDS-PAGE (Gel), transferred to nitrocellulose membranes (Blots), and probed with the ScaD cohesins (CohD1 and CohD3, respectively) as described in the legend to Fig. 3.
|
Description of the SLH module of ScaD. The SLH module of A. cellulolyticus ScaD is closely related in sequence to that of ScaC from the same species and to those of other anchoring scaffoldins from C. thermocellum and B. cellulosolvens (Fig. 5). The C. thermocellum anchoring protein, SdbA, represents an exception that maps on the opposite side of the phylogenetic tree among those of the SLH-bearing surface enzymes derived from different gram-positive species. Nevertheless, the similarity in sequence and the resemblance in the number and arrangement of their domains (Table 3) may allude to common structural and/or functional features that are shared by the designated group of anchoring scaffoldins in attaching the respective cellulosome complexes to the cell surface.
![]() View larger version (26K): [in a new window] |
FIG. 5. Comparative phylogenetic analysis of the ScaD-borne SLH module. The A. cellulolyticus SLH modules (filled symbols) map on a separate branch of the phylogenetic tree, together with those of the anchoring proteins of C. thermocellum (OlpA, OlpB, and Orf2p) and B. cellulosolvens ScaB. See Table 3 for sources of sequences used to prepare this figure. Symbols: squares, anchoring proteins; circles, surface-bound enzymes; triangles, surface layer proteins.
|
|
|
|---|
![]() View larger version (28K): [in a new window] |
FIG. 6. Schematic model of the proposed interactions among the A. cellulolyticus cellulosomal components and the two modes of attachment to the cell surface. (A) Dockerin-containing enzymes are incorporated into the ScaA scaffoldin via interaction with the ScaA cohesins. The ScaA dockerin binds to the ScaB type II cohesins, and the ScaB dockerin binds to the ScaC cohesins. The latter complex is anchored to the cell surface by the ScaC SLH module. This arrangement was described by Xu et al. (57). (B) In the additional mechanism of attachment, the enzyme-laden ScaA is bound to the type II cohesins of ScaD, which can also accept a single enzyme via its third type I cohesin. The SLH module of ScaD serves to anchor the alternative complex to the cell surface.
|
Like ScaC, the ScaD scaffoldin, described in the present report, contains a C-terminal SLH module, which implies that both proteins act as anchoring scaffoldins. However, unlike any other scaffoldin yet described, ScaD contains, in the same polypeptide chain, two different types of cohesin, type I and type II, which exhibit two divergent dockerin-binding specificities. The consequence of this molecular arrangement is that ScaD can integrate two primary scaffoldins via its resident type II cohesins and, additionally, a single dockerin-containing enzyme via the type I cohesin (Fig. 6B). Since each primary scaffoldin represents eight enzymes, the ScaD-anchored cellulosome system of A. cellulolyticus would carry up to 17 enzymes, compared to 96 for the ScaC-anchored system. The particularly elaborate surface topography of A. cellulolyticus (Fig. 7) would appear to reflect the architectural diversity of its cellulosome systems.
![]() View larger version (111K): [in a new window] |
FIG. 7. Scanning electron micrograph of cationized ferritin-treated cells of A. cellulolyticus.
|
The physiological basis for two alternative modes of anchoring cellulases to the cell surface is currently unknown. The presence of the three putative transcriptional units (scaA, scaB-scaC, and scaD) (Fig. 1) would presumably be in line with the two alternative modes of cellulosome architecture as illustrated in Fig. 6. According to this model, there should be three molecules of ScaB per molecule of ScaC, which could correspond with the upstream position of scaB relative to scaC, taking into account possible polarity effects in translation of dicistronic transcriptional units. In fact, the model illustrated in Fig. 6 is but tentative and can be modified in the event of the discovery of additional scaffoldins. In this context, we have previously noted an unidentified 170-kDa scaffoldin that interacted specifically with a ScaC cohesin probe (see Fig. 4 of reference 57). Matrix-assisted laser desorption ionization-time-of-flight analysis of peptides derived from this band (Q. Xu, unpublished data) indicated a close (but nonidentical) sequence similarity to known cohesin sequences from this bacterium, thus implying the presence of at least one additional dockerin-bearing scaffoldin that would bind to ScaC. This unidentified scaffoldin would necessarily be located at an alternative site in the genome, unrelated to the scaffoldin gene cluster described here, and would thus constitute yet another transcriptional unit. The stoichiometry of ScaB versus ScaC would be altered accordingly, and the A. cellulolyticus cellulosome system may well be more intricate than hitherto demonstrated. Future studies will include efforts to clone and characterize further the putative 170-kDa scaffoldin.
|
|
|---|
This article has been cited by other articles:
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Copyright © 2009 by the American Society for Microbiology. For an alternate route to Journals.ASM.org, visit: http://intl-journals.asm.org | More Info»