Previous Article | Next Article ![]()
Journal of Bacteriology, October 2004, p. 6492-6500, Vol. 186, No. 19
0021-9193/04/$08.00+0 DOI: 10.1128/JB.186.19.6492-6500.2004
Copyright © 2004, American Society for Microbiology. All Rights Reserved.
Unité de Microbiologie et Génétique, CNRS UMR 5122, Université Lyon 1, Villeurbanne,1 Useful Bacterial Surface Proteins, URLGA, INRA, Jouy-en-Josas, France2
Received 21 April 2004/ Accepted 5 July 2004
|
|
|---|
|
|
|---|
In gram-positive bacteria, uptake of peptides by ABC transport systems is involved in nitrogen nutrition of the organism, as has been well established for lactic acid bacteria, for instance (11, 22), or in the regulation of several cellular processes, as has been shown for Bacillus subtilis, Enterococcus faecalis, and several pathogenic bacteria (23, 24). In Lactococcus lactis, by far the most studied lactic acid bacterium, oligopeptide transport is reported to be accomplished by only one ABC transporter, the OppLl system, despite the presence of several copies of such transporters on the chromosome (4, 22). OppLl presents several unique qualities, compared to other oligopeptide transport systems. For instance, it possesses only one binding protein (OppA), whereas the transport systems of Streptococcus thermophilus (Ami) and Lactobacillus bulgaricus are composed of three and two oligopeptide-binding proteins (OBPs), respectively (11, 27). OppA is able to bind peptides with up to 35 amino acid (aa) residues, which up to now was considered a unique feature of OBPs (8). Due to the length of liganded peptides, only the six N-terminal residues of the peptides are entrapped in the binding pocket of OppA, whereas the remainder of the peptide interacts with the surface of the binding protein in a nonopportunistic manner. Nevertheless, a recent study has demonstrated that the binding protein OppA is not the sole determinant of the specificity of peptide transport in L. lactis. Part of the specificity of peptide transport by OppLl is presumably imposed by the translocon itself (5). As a result, OppALl is capable to bind peptides that are not subsequently transported by the translocon (5, 18). Moreover, replacement of the binding protein OppA of L. lactis MG1363 by other lactococcal OppA proteins did not affect the pattern of peptide transport by the strain, suggesting quite a good conservation of OppLl specificity within the lactococcal genus, despite the variability of the amino acid sequences of OppALl binding protein (5).
In the present work, we demonstrate that in all L. lactis strains under study (except in MG1363), a second oligopeptide transport system is expressed and functional. This so-called Opt system differs from the well-known OppLl system in its genetic organization and in the number of OBPs synthesized. Analyses of peptide utilization and transport by Opp-deficient strains allowed us also to provide evidence for differences in peptide transport specificities between the Opp and Opt systems. Differences in specificities between both transporters and differences in expression of peptide transport systems between strains are very likely responsible for the previously observed variability in peptide uptake within the genus Lactococcus (5).
|
|
|---|
|
View this table: [in a new window] |
TABLE 1. Strains and plasmids used in the present study
|
Peptide transport. Peptide transport assays were performed at 22°C as previously described (5). Briefly, cells were grown in CDM (OD650 = 0.8), collected by centrifugation and washed twice in 50 mM KH2PO4-K2HPO4 (pH 7.5), and the intracellular pool of amino acids was exhausted by incubating cells in the presence of 1 mM 2-deoxyglucose (37). Prior to transport experiment, cells were energized with 25 mM glucose. Energized cells (OD650 = 1.0) were incubated at 22°C in the presence of 50 µmol of peptide/liter, unless otherwise stated. Peptide transport was determined by measuring the internal accumulation of the constitutive amino acids of the peptide under study. Amino acids were detected by reversed-phase high-performance liquid chromatography after precolumn derivatization with o-phthalaldehyde, as previously described (5).
Preparation of IL-1403 electrocompetent cells and electroporation conditions.
L. lactis IL-1403 was grown overnight in M17Lac supplemented with 0.5% (wt/vol) glucose, 0.17 mol of saccharose/liter, and 1% (wt/vol) glycine. Cells were collected (6,000 x g; 10 min at 4°C), washed twice, and finally resuspended in 0.5 M saccharose supplemented with 10% (vol/vol) glycerol. Cells were immediately used for electroporation as previously described (40), except that the electric conditions were 2.0 kV, 200
, and 25 µF.
Cell surface proteinase activity and ß-casein hydrolysis. M17Lac-grown bacterial cells (OD600 = 1.0) were collected, washed, and resuspended in 100 mM HEPES (pH 6.5) and 10 mM CaCl2 to a final OD600 of approximately 7.0. A 5.5 µµ solution of dephosphorylated ß-casein (Sigma) was hydrolyzed by cellular suspension as previously described (13). Hydrolysis products were separated by sodium dodecyl sulfate-polyacrylamide gel electrophoresis on 15% polyacrylamide gels and stained with Coomassie brillant blue R250 (Prolabo, Fontenay-sous-Bois, France) as previously described (14).
RNA purification and RT-PCR. RNA was purified from 1.25 ml cultures in CDM. Bacterial cells were harvested (OD600 = 0.8) and treated with the RNeasy Mini kit (QIAGEN) and DNase I (QIAGEN) as previously described (3). cDNAs were obtained with 0.1 µg of purified RNA with the QIAGEN OneStep RT-PCR kit according to the manufacturer's procedure. The cDNA amplification of the optA-optB region (2.5 kb) was obtained with the primers optAsens2 (5'-CGCGGATCCAGCGGTTCTAGCTCATCGTCA-3') and optBrev1 (5'-GGCTGCAGCTAGAGACGAACTCGTGG-3'). The optS amplicon (1.6 kb) was generated with the primers optSS1 (5'-GTGGCATGCGGCACAAAAACAAGTGAGCAC-3') and optSrev1 (5'-AACTGCAGTTATTTAACATAAGCCGATTTTAGG-3'). Before reverse transcriptase PCR (RT-PCR) assays, all primers were controlled by direct PCR with a ready-to-use PCR mixture (Fermentas) and the genomic DNAs from the different lactococcal strains. In RT-PCR assays, the DNA contaminations were assessed by adding the enzyme mixture at the second step of the protocol (95°C for 15 min), which corresponds to inactivation of the RT and activation of the hot-start polymerase.
Genomic DNA extraction and Southern blotting. Genomic DNA was purified according to a rapid procedure as described previously (5). Then, the purified DNA was digested with HaeII, HindIII, AccI, or ClaI. The resulting DNA fragments were separated by electrophoresis on 0.8% (wt/vol) agarose gels and transferred onto a nylon membrane (Positive membrane; Q-BIOgene) as described by Southern (33). The 555-bp HaeII-BlgII fragment obtained from the plasmid pAML1 harboring the oppA gene from L. lactis Wg2 was used as a probe. The ECL direct nucleic acid labeling system (Amersham Biosciences Europe) was used to label the probe with horseradish peroxidase. Specific hybridizations were detected by chemiluminescence with the ECL detection system.
Construction of mutants disrupted in optA or optS. The genes optA and optS were inactivated in strain IL-1403 by single-crossover homologous integration with plasmid pRV300 (25). Internal fragments of optS and optA genes were amplified by PCR with the DyNazyme polymerase (Finnzymes) and primer pairs optSmut1 (5'-GAATTCCAGTCACATTGGCACAAC-3') and optSmut2 (5'-AAGCTTGTCGCAACGGTCGAAC-3') and optAmut1 (5'-GAATTCCAGCTAACTCTGTTTATTACCCAC-3') and optAmut2 (5'-AAGCTTGGTTGTGCTGCATACTTAGC-3'), respectively. Internal optS and optA PCR products were restricted with EcoRI and HindIII and cloned into the plasmid pRV300 treated with the same restriction enzymes. The resulting plasmids (pRMS and pRMA, respectively) were transferred into E. coli NM522, and the structure was confirmed by restriction digestion. Then, the two recombinant plasmids were independently transferred into L. lactis IL-1403 by electroporation. Transformants were selected on M17Lac agar medium supplemented with 0.5% (wt/vol) glucose and 1 mg of erythromycin/liter and controlled by Southern blotting for the single-crossover homologous integration of pRMS or pRMA in the optS or optA gene, respectively. In addition, the absence of OptA biosynthesis was checked by Western blotting.
Purification of L. lactis Wg2 OptA-His6 recombinant protein and preparation of rabbit anti-OptA polyclonal serum. The optA open reading frame was amplified by PCR with the primers optAsens2 (5'-CGCGGATCCAGCGGTTCTAGCTCATCGTCA-3') and optArev1 (5'-CCCAAGCTTGAGGTAAGCTGTTTTGAAGTCAT-3'). The PCR product was restricted with BamHI and HindIII and cloned into the Qiaexpress pQE30 vector (QIAGEN). The resulting plasmid, pQWTA, was introduced into E. coli NM522, leading to strain ML8166. Expression of the OptA-His6 recombinant protein in E. coli and the purification procedure were similar to the methods described previously for the OppA-His6 recombinant protein (5). This OptA-His6 purified protein was used to raise anti-OptA polyclonal antibodies in rabbit (Valbex-University Lyon I, Villeurbanne, France).
Western blot analysis of OppA and OptA. Lactococcal cultures were carried out with CDM supplemented with 0.5% (wt/vol) glucose at an OD600 value of up to 0.8. Bacterial proteins were extracted by boiling and separated by electrophoresis with an sodium dodecyl sulfate-10% polyacrylamide gel electrophoresis gel. Then, proteins were electrotransferred overnight (0.2 mA/cm2) onto reinforced cellulose nitrate membranes (Schleicher & Schuell). Immunodetection of the OptA protein was performed by the method of Harlow and Lane (17) with anti-OptA (or anti-OppA) polyclonal antibodies (1:4,000) and anti-rabbit immunoglobulin G-peroxidase conjugate (1:4,000; Sigma-Aldrich). Revelation was done with the BM chemiluminescence Western blotting substrate of Roche Molecular Biochemicals.
Nucleotide sequence accession number. The nucleotide sequence reported in this paper has been submitted to GenBank with accession number AY445663.
|
|
|---|
The sixteen peptides under study were able to support the growth of the strain SK11 in CDM (Fig. 1). Surprisingly, the Opp variant SKM6 still used twelve peptides (YPFPGPI, VAPG, LPQY, VRYL, TGGFM, KGGFM, YGGFL, DMPIQA, AMKPWIQPK, EQIVIR, VGDE, and ISQRYQK) as a source of essential amino acid. Actually, only four peptides (DRVYIHPFHL, RPPGFSPFR, IARRHPYFL, and TYVQHK) were unable to sustain the growth of SKM6. It therefore suggests that 12 of these 16 peptides are (at least partly) taken in charge by an oligopeptide transport system other than the Opp system. This suggestion is reinforced by peptide transport experiments. The lack of growth of SKM6 in CDM containing DRVYIHPFHL, RPPGFSPFR, IARRHPYFL, or TYVQHK was due to the inability of the mutant to transport these peptides, as was exemplified with DRVYIHPFHL (Table 2). These four peptides are therefore specifically internalized via the Opp transporter. On the other hand, the 12 other peptides were effectively transported by the Opp variant SKM6. It is worth mentioning that SKM6 exhibited a PrtP phenotype, and no hydrolysis of the peptides prior to transport by SKM6 could be detected. This again supports the hypothesis of the involvement of a second functional oligopeptide transporter. Nevertheless, the transport rates of several peptides (VAPG, TGGFM, DMPIQA, and VGDE) in SKM6 were significantly reduced (Table 2), suggesting an overlapping specificity between this unknown, but functional, oligopeptide transport system and the well-known Opp system.
![]() View larger version (29K): [in a new window] |
FIG. 1. Growth of L. lactis SK11 and its Opp derivative SKM6 in the presence of peptide as a source of essential amino acids. Growth rate was compared to that obtained in CDM containing all the amino acids in free form.
|
|
View this table: [in a new window] |
TABLE 2. Initial rate of peptide transport by L. lactis SK11 and its Opp derivative SKM6a
|
![]() View larger version (41K): [in a new window] |
FIG. 2. Variability of oligopeptide transport system expression by L. lactis. Immunodetection of OBP proteins OppA (A) or OptA (B) or cDNA amplification of the region optA-optB (C) or optS (D) in L. lactis MG1363 (lane 1), IL-1403 (lane 2), SK11 (lane 3), SKM6 (lane 4), WG2 (lane 5), MLS (lane 6), and MLA (lane 7). The molecular mass marker used in cDNA fragment electrophoresis was the 1-kb DNA ladder (Invitrogen).
|
(iii) In silico analysis of the Opt transport system. The opt gene order (optABCDF) is quite different from that of the opp operon (oppDFBCA). The genes optA, optB, optC, and optD are separated by short regions (78 nucleotides between optA and optB, 15 nucleotides between optB and optC, and 2 nucleotides between optC and optD). The genes optD and optF overlap by one nucleotide. Immediately upstream of the opt operon, the optS gene is transcribed in the same direction as the opt operon and encodes a second binding protein exhibiting 52.5% identity with OptA. The genes optS and optA are separated by 309 nucleotides. Both genes are preceded by potential promoter regions characterized by well-conserved 35 (TTGACA or TTGAAT, respectively) and 10 (TATAAT) boxes. These data suggest a possible independent transcription of optS and optABCDF.
OptA and OptS are characterized by an N-terminus signal sequence typical of lipoproteins with a LXXC cleavage site. They also exhibit the extracellular peptide and nickel-binding protein family signature sequence (A X7 D X4 T X3 R X3 K) at position 83 of the OptA sequence (Fig. 3) (34). OptD and OptF display the Walker A motif, a glycine-rich loop involved in phosphoryl transfer, and the Walker B motif, exhibited by many nucleotide-binding proteins, especially ATP-binding proteins (39).
![]() View larger version (125K): [in a new window] |
FIG.3. Sequence comparison of OBPs from gram-positive bacteria. OptA, OptS, and OppA sequences of L. lactis IL-1403 were obtained from the corresponding sequenced genome (4). The sequences of OppA2 from S. uberis 0140J, OppA of B. subtilis 168, OppA of L. lactis Wg2, OppA1 of L. delbrueckii subsp. bulgaricus B14, AmiA1 of S. thermophilus, and AmiA of S. pneumoniae R800 were obtained from databases by their respective accession numbers (GenBank accession no. AY256913, P24141, AY189901, AAK72116, AAL68705.1, and AE007579, respectively). Identity of 75% and similarity of 85% of the amino acids are indicated by boxes and by the grey background, respectively.
|
|
View this table: [in a new window] |
TABLE 3. Homology between Opt of L. lactis IL-1403 and other ABC transport systems of oligopeptides from gram-positive bacteriaa
|
(iv) Characterization of the peptide uptake via the Opt transporter. To unravel the respective roles of the two binding proteins of the Opt system, mutants of IL-1403 deficient for OptA or OptS protein expression were constructed. First, internal fragments of optA and optS genes were cloned in plasmid pRV300 with E. coli NM522 as a host. Second, the resulting plasmids (pRMA and pRMS, respectively) were transferred into L. lactis IL-1403. The integration of pRMA into the gene optA by homologous recombination resulted in the mutant MLA, and that of pRMS into optS yielded the mutant MLS. The integration loci were controlled by Southern hybridizations. The absence of expression of the optA gene in the mutant MLA and optS in the mutant MLS was checked by RT-PCR (data not shown).
Fifteen peptides were able to sustain the growth of the strain IL-1403 in CDM (5). The mutant MLA was unable to use any of these 15 peptides, which were not at all internalized, as shown by peptide transport analyses (Table 4). This results show that Opt is the unique transporter involved in the uptake of these oligopeptides by IL-1403. Moreover, Opt is unable to take up the peptide DRVYIHPFHL (Table 4), which confirms that this peptide is specifically internalized via the Opp system (Table 2).
|
View this table: [in a new window] |
TABLE 4. Initial rate of peptide transport by L. lactis IL-1403 and its Opt mutants MLA and MLSa
|
![]() View larger version (19K): [in a new window] |
FIG. 4. Growth of L. lactis ILM521 synthesizing the cell surface proteinase PrtP in milk ( ) and its opt derivatives MLA521 (OptA; ) and MLS521 (OptS; ). Milk was supplemented with 0.5% (wt/vol) glucose. The assay was repeated twice.
|
|
|
|---|
The presence of multiple OBPs is a general feature of oligopeptide transporters from streptococci. For instance, S. uberis synthesizes two binding proteins, and three OBPs are recruited by the Ami transporters of S. pneumoniae or S. thermophilus and by the Hpp system of S. gordonii (2, 11, 19, 35). Moreover, a high level of identity was found between the Opt proteins from L. lactis and the corresponding oligopeptide ABC components of streptococci, suggesting a streptococcal origin of Opt. In the case of L. lactis, the benefit of the OBP-encoding gene duplication is not established. Inactivation of the OptS protein does not impair the peptide transport function of the Opt system. It therefore suggests that both binding proteins OptA and OptS act independently, instead of interacting to form a functional peptide-binding complex, as was previously suggested occurs with streptococci (2, 19). Since the OptS-defective mutant grows in milk, as does its parental strain, there may be a role other than a nutritional one (if any) for this binding protein. Moreover, the spectrum of oligopeptides that could be taken up by the Opt system is apparently not enlarged in the presence of a functional OptS protein, which calls the role of this second binding protein even more into question. Interestingly, OptS is highly identical to DppA (95% identity at the amino acid level) and is a lactococcal OBP which binds di-, tri- and tetrapeptides exclusively (31). The Dpp system transport is involved in transcriptional regulation of several components of the proteolytic system (16, 32). An exciting hypothesis would be that the Opt system is able to manage different functions via two peptide-binding proteins, i.e., a nutritional role played by OptA and a regulatory function exerted by OptS.
OptA and OptS exhibit the extracellular peptide and nickel-binding protein signature sequence (A X7 D X4 T X3 R X3 K), but are very different from OBPs of other lactic acid bacteria. Firstly, on the basis of their sequence length, OptA (545 aa) and OptS (549 aa) differ from OppA of L. lactis and AmiA1 of S. thermophilus St18 by 55 to 51 and 110 to 106 residues, respectively. Secondly, the phylogenetic tree revealed that OptA and OptS are more distant from OppA proteins of L. lactis and Lactobacillus delbrueckii subsp. bulgaricus than from OppA proteins of B. subtilis and E. coli (Fig. 5). Actually, OptA and OptS form a group closely related to OppA proteins from S. uberis and S. mutans.
![]() View larger version (19K): [in a new window] |
FIG. 5. Neighbor-joining phylogenetic tree of OBP sequences. The tree was inferred by using an expansion of CLUSTALW by Infobiogen (http://www.infobiogen.fr). Reading from top to bottom of the tree, the following sequences were obtained from databases by their respective GenBank accession numbers (in parentheses): AmiA1, AmiA2, and AmiA3 of S. thermophilus ST18 (AAL68705, AAL68706, and AAL68707), AmiA1 of S. pneumoniae R800 (AE007579), HppA of S. gordonii DL1 (AAB46614.1), AliB of S. pneumoniae R800 (Q51933), OppA of S. mutans UA159 (AAN58024.1), OppA2 from S. uberis 0140J (AY256913), OptS and OptA from the sequenced genome of L. lactis IL-1403 (4), OppA of E. coli K-12 (P23843), OppA of B. subtilis 168 (P24141), AppA of B. subtilis JH12795 (P42061), OppA2 and OppA1 of L. delbrueckii subsp. bulgaricus B14 (AAK72116), OppA of L. lactis Wg2 (AY189901), and OppA of L. lactis IL-1403 (4).
|
The presence of two oligopeptide uptake systems is expected to confer a significant advantage to a lactococcal strain by broadening its substrate specificity and probably enhancing transport efficiency (38). Nevertheless, the presence of a unique transporter is sufficient to support the bacterial nutrition with extracellular oligopeptides. The transporter Opt can completely substitute Opp for the nutrition function and vice versa, as indicated by the growth capabilities of strains MG1363 and IL-1403. Once again, it calls the physiological meaning of the coexistence of the two oligopeptide transport systems in wild-type strains into question. In gram-positive bacteria, extracellular peptides are known to control many cellular processes such as the development of competence, sporulation, entry into stationary phase, conjugation, bacteriocin production, and virulence (15, 20, 23, 24). So, Opt and Opp transporters may differ in these nonnutritional functions.
This work was supported by grants from C.N.R.S., I.N.R.A., and the Université Claude Bernard-Lyon I. M.L. and P.C. were the recipients of fellowships from the Ministère Français de la Recherche et de la Technologie.
|
|
|---|
- and ß-subunits of ATP synthase, myosin, kinases and other ATP requiring enzymes and a common nucleotide binding fold. EMBO J. 1:945-951.[Medline]
This article has been cited by other articles:
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Copyright © 2009 by the American Society for Microbiology. For an alternate route to Journals.ASM.org, visit: http://intl-journals.asm.org | More Info»