Previous Article | Next Article ![]()
Journal of Bacteriology, November 2004, p. 7196-7204, Vol. 186, No. 21
0021-9193/04/$08.00+0 DOI: 10.1128/JB.186.21.7196-7204.2004
Copyright © 2004, American Society for Microbiology. All Rights Reserved.
DuPont Company, Central Research and Development Department, Wilmington, Delaware
Received 16 June 2004/ Accepted 5 August 2004
|
|
|---|
|
|
|---|
Efflux systems range from the broad substrate specificity of multidrug efflux pumps with complex regulation to those with very narrow substrate specificity and specific regulation. Examples of the latter class are found in metal ion efflux systems. For instance, the CusCFBA complex exports copper and silver ions from E. coli cells (13). Expression of the CusCFBA efflux system is regulated by a two-component regulatory system in response to the presence of its substrates, copper or silver ions (12, 25). Thus, in general, treatment with a chemical may trigger upregulation of efflux pumps for which that chemical is a substrate. Accordingly, as data from genome-wide analyses are increasingly being generated, clues to undefined efflux gene function may be found from transcriptional or translational responses to chemicals.
Both the AcrAB-TolC and the CusCFBA transporters are examples of multicomponent efflux systems in gram-negative bacteria. The inner membrane components, such as AcrB or CusA, are the energy-dependent transport proteins. Both AcrB and CusA are members of the resistance/nodulation/cell division (RND) superfamily of proteins (46), which catalyze substrate efflux by an H+ antiport mechanism. However, the efflux pump proteins in other multicomponent efflux systems may come from several protein families (38). The periplasmic proteins in the multicomponent efflux systems, such as AcrA or CusB, are members of the membrane fusion protein (MFP) family that are essential for efflux activities of the corresponding transporters (10). Proteins from the outer membrane factor (OMF) family (28), such as TolC or CusC, span the outer membrane and periplasmic space connecting with the inner membrane efflux pumps and provide a channel for efflux of substrate molecules from the cytoplasm to the outside of the cell (18). The AcrAB-TolC transporter is a tripartite system, as are numerous other efflux transporters in gram-negative bacteria. Interestingly, CusCFBA is an example of a rare four-component transport system. CusF is a small periplasmic copper binding protein that increases the efficiency of copper efflux (13).
An informatics analysis conducted by Harley and Saier identified a family of putative efflux transport (PET) proteins in bacteria, yeast, and plants (15). The proteins of the PET family in gram-negative bacteria have 12 predicted transmembrane segments, indicating membrane localization. In many cases, genes for PET family proteins are found adjacent to genes encoding MFP family proteins that function in efflux transport. However, experimental evidence of PET function has not been published, nor have any predictions for substrates been made. During genome-wide analysis of transcriptional responses of E. coli treated with p-hydroxybenzoic acid (pHBA), a compound for which microbial bioproduction is being developed (2, 23, 31), we noted dramatically elevated expression of a gene encoding a PET family protein and two adjacent genes. Thus, the role of these proteins in pHBA efflux as a defense mechanism triggered by excess pHBA was investigated.
|
|
|---|
E contains EZ::TN
Kan-1
insertions in yhcS and yhcP. The locations of these insertions were verified by PCRs with gene-specific and transposon-specific primers. P1clr100Cm-mediated transduction (24) was used to construct derivatives of E. coli strain MG1655 with yhcS::TN
Kan
, yhcP::TN
Kan
, or tolC::mini-Tn10. |
View this table: [in a new window] |
TABLE 1. E. coli strains and plasmids
|
Plasmid pDEW659 carries the yhcP gene in a moderate-copy-number vector. PCR amplification used primers 5'GTTAGCAAGCTTTTAACTATCGGTCAACGCAT3' and 5'AGCAGTGAATTCATGGGTATTTTCTCCATTGC3' with HindIII or EcoRI sites for directional cloning. The PCR product and plasmid pKK223-3 at an approximate molar ratio of 2:1 were digested with EcoRI and HindIII, purified, and ligated. Following ligation, digestion with PstI and SmaI was used to linearize vector without insert DNA. The DNA from this selection digestion was used for transformation of E. coli strain JM105. One plasmid with an insert of the correct size was retained.
Plasmids pDEW668, pDEW673, and pDEW675 carry all or part of the yhcRQP operon expressed from the trc promoter in a high-copy-number plasmid. The PCR primers were designed such that when the amplified DNA was cloned into the pTrcHis2TOPO vector (Invitrogen), N-terminal fusion proteins or C-terminal fusion proteins would not be formed and thus the native proteins would be expressed. Also, an EcoRI site incorporated into one of each set of primers was used to determine orientation of the inserted DNA. The primers to amplify the entire yhcRQP operon were 5'GAAGTTAGCAAGCTTTTAACTATCGGTCAACGCATG3' and 5'ACAGGAGAATGAATTCATGCCCTTCTCTGCGGCGAC3'. Those used to amplify yhcQP genes were 5'TTAACTATCGGTCAACGCATGTT 3' and 5'ACAGGAGAATGAATTCGTGAAAACACTAATAAGAAA 3'. The yhcRQ genes were obtained by using the primers 5'TTAACCAAACTCACGCAGGC3' and 5'ACAGGAGAATGAATTCATGCCCTTCTCTGCGGCGAC3'. The purified PCR products were cloned into pTrcHis2TOPO according to the protocol supplied by the vendor. After transformation of E. coli strain TOP10 (Invitrogen), plasmid DNA from individual transformants was digested with EcoRI. Plasmids with the proper size and orientation of inserted DNA were retained and verified by DNA sequence analysis.
Media and chemicals. All reagents and materials used for the growth and maintenance of bacterial cells were obtained from Aldrich Chemicals (Milwaukee, Wis.), Difco Laboratories (Detroit, Mich.), Gibco/BRL (Gaithersburg, Md.), or Sigma Chemical Company (St. Louis, Mo.). Either rich Luria-Bertani (LB) medium (24) or defined Vogel-Bonner medium (9) with 0.4% glucose as a carbon source was used. When necessary, ampicillin was added for plasmid maintenance at 25 µg/ml in defined medium or at 100 µg/ml in rich medium.
DNA microarray. DNA microarray analysis (29) was used to assess transcriptional alterations of essentially all E. coli genes following treatment with pHBA. E. coli strain DE112 was grown in Vogel-Bonner minimal medium to an optical density at 600 nm of 0.2. At this point the culture was split in two flasks, and pHBA in the acid form was added to one flask from a stock solution in ethanol to achieve a final pHBA concentration of 25 mM. An equivalent volume of ethanol without pHBA was added to the other flask. Approximately 58% growth inhibition resulted from the pHBA treatment under these conditions. Cells were harvested from the control and treated flasks at 30 and 60 min after pHBA addition and were used for RNA isolation. RNA isolation, labeling, and hybridization and data acquisition were done as previously described (42, 52).
Luminometry. E. coli strain DPD1675, MG1655, or DPD2433 carrying plasmid pDEW655 was used to measure the bioluminescent response to various chemicals. Aliquots (50 µl) of actively growing cultures at 37°C in LB medium were added to 50 µl of LB medium (pH 7) containing either pHBA, 1-naphthoate, benzoate, or salicylate in the wells of a white microplate. The sodium salt form of the chemicals was used so that the initial pH of the medium remained neutral. Twofold dilutions of each chemical were tested at seven final concentrations in duplicate. Bioluminescence was measured as relative light units with a Luminoskan microplate luminometer (LabSystems) at 37°C in the kinetic mode immediately after the cell cultures were added.
To test responses to weak acids, E. coli strain DPD1675 carrying either pDEW215, pDEW558, or pDEW655 was grown overnight in Vogel-Bonner medium supplemented with L-proline, L-lysine, uracil, and 25 µg of ampicillin per ml. The overnight cultures were diluted into the same medium except without ampicillin and incubated at 37°C until they were in mid-exponential growth. Aliquots (50 µl) of these actively growing cultures were added to 50 µl of the same medium (pH 7) containing various concentrations of sodium acetate or sodium salicylate in duplicate in the wells of a white microplate. Immediately after addition of the cell culture, the bioluminescence was quantitated in a Luminoskan microplate luminometer at 37°C in the kinetic mode.
MIC determination and zones of growth inhibition. For tests without tetrazolium violet, MICs were determined by visually assessing turbidity. Dilution series, 3:4 or 1:2, were used in duplicate to test a range of chemical concentrations in a 100-µl final volume in microplates. The inoculum was 50 µl of a 1:500 dilution in Vogel-Bonner medium of overnight cultures of each of the strains grown in the same medium, except with addition of 25 µg of ampicillin per ml for plasmid-containing strains. For this test, the MIC was defined as the lowest concentration that resulted in complete lack of turbidity after incubation for 21 h at 37°C.
For screening large numbers of chemicals, 0.01% tetrazolium violet was added as an indicator of viability of E. coli MG1655 (yhcP+) and DPD2444 (yhcP) in Vogel-Bonner medium. Twofold dilution series of each chemical were tested in a 100-µl final volume. The inoculum was 50 µl of an overnight culture in Vogel-Bonner medium that had been previously diluted 500-fold into fresh medium. Following incubation at 37°C without shaking for 16 to 18 h, the purple color was visually scored. A score of 4+ indicated full purple color equivalent to that of a no-chemical control. A score of 3+, 2+, or 1+ indicated decreasing color, while a score of 0 indicated the complete absence of color. The MIC was defined as the lowest tested concentration that gave complete absence of color. The rank of difference between strains was defined as the score of pigment color for E. coli MG1655 in wells containing the concentration of a given chemical at the MIC for DPD2444. When MG1655 had no color, the rank was 0. When MG1655 was scored 1+, the rank was 1; when it was scored 2+, the rank was 2; etc.
Tests of the zone of growth inhibition on Vogel-Bonner plates were done with 0.1 ml of overnight cultures plated with 2.5 ml of Vogel-Bonner soft agar. The zone of growth inhibition surrounding a disk containing 80 µmol of the pHBA sodium salt was measured after 24 h of incubation at 37°C.
|
|
|---|
The E. coli yhcP gene, encoding a PET family protein, is predicted (45) to be cotranscribed with two nearby genes, yhcQ and yhcR. The order of genes in this putative operon is yhcRQP. The product of yhcQ likely functions in cellular efflux because it is an MFP family protein (15). The third gene of the putative operon, yhcR, encodes a protein for which no prediction of function has been made. The observed coregulation in response to pHBA treatment is consistent with the predicted operon structure, and thus these three genes will be referred to as the yhcRQP operon.
Regulation of yhcRQP expression by YhcS.
The yhcS gene of E. coli encodes a member of the LysR family of positive-acting regulatory molecules (37). This gene is located immediately adjacent to and is divergently transcribed from the yhcRQP operon. The possibility that YhcS controls expression of yhcRQP was tested by using a yhcS null mutation and a plasmid carrying a yhcRQP-luxCDABE gene fusion. Table 2 shows the bioluminescent response a yhcS::TN
Kan
mutant and an otherwise isogenic yhcS+ strain after 30 min of pHBA exposure. Relatively high concentrations of pHBA were used because the uncharged acid form, which is the moiety that diffuses into the cell, is a minor component at neutral pH.
|
View this table: [in a new window] |
TABLE 2. Bioluminescence response of the yhcRQP-luxCDABE gene fusion to pHBAa
|
Kan
mutation almost completely eliminated the increased expression induced by pHBA treatment. Accordingly, functional YhcS is required for upregulation of yhcRQP expression in response to pHBA addition. These results compellingly imply that YhcS functions, in analogy to other LysR family members, as a positive transcription factor for the yhcRQP operon. Structure-activity relationships for YhcS activation. Further characterization of the signals that trigger activation of YhcS was done by using E. coli yhcS+ strains, DPD1675 and MG1655, carrying the yhcRQP-luxCDABE gene fusion. In addition to pHBA, several aromatic weak acid molecules also activated expression. In the DPD1675 (tolC) host strain, 25 mM pHBA resulted in 300-fold-elevated bioluminescence. In this strain, 1-naphthoate elevated yhcRQP expression by 130-fold. In the MG1655 host strain (tolC+), 12.5 mM sodium benzoate and 6.2 mM sodium salicylate resulted in 12- and 77-fold increases in bioluminescence, respectively. Thus, the inducing molecules include pHBA, salicylate, benzoate, and 1-naphthoate.
Compounds tested that did not induce expression were operationally defined as those for which there resulted less than a threefold increase in light production from E. coli strains carrying the yhcRQP-luxCDABE gene fusion. Compounds unrelated in structure to the known inducing molecules did not induce expression. Those tested were ethanol, limonene, NaCl, polymyxin sulfate, benzalkonium chloride, gramicidin S, and sodium dodecyl sulfate (data not shown). In addition, several compounds related in structure to the inducing molecules were not inducers, including acetate, propionate, methyl paraben, 2-biphenylcarboxylate, and L-tyrosine (see Fig. 2A; other data not shown). Accordingly, the requirement for the carboxylate moiety was demonstrated by the lack of response to methylparaben, the methyl ester of pHBA. Furthermore, the requirement for an aromatic ring was demonstrated by the lack of response to nonaromatic carboxylic acids, acetate and propionate. Thus, the response of this regulatory system is specific for certain aromatic carboxylic acids.
![]() View larger version (18K): [in a new window] |
FIG. 2. Bioluminescent response of three gene fusions to acetate. A. E. coli strain DPD1675 carrying plasmid pDEW655 with a yhcRQP-luxCDABE gene fusion. B. E. coli strain DPD1675 carrying plasmid pDEW215 with a yciG-luxCDABE gene fusion. C. E. coli strain DPD1675 carrying plasmid pDEW558 with a lysU-luxCDABE gene fusion. Diamonds, no addition. Squares, 80 mM sodium acetate added at zero time. Circles, 160 mM sodium acetate added at zero time. RLU, relative light units.
|
![]() View larger version (17K): [in a new window] |
FIG. 1. Bioluminescent response of three gene fusions to salicylate. A. E. coli strain DPD1675 carrying plasmid pDEW655 with a yhcRQP-luxCDABE gene fusion. B. E. coli strain DPD1675 carrying plasmid pDEW215 with a yciG-luxCDABE gene fusion. C. E. coli strain DPD1675 carrying plasmid pDEW558 with a lysU-luxCDABE gene fusion. Diamonds, no addition. Squares, 0.6 mM sodium salicylate added at zero time. Circles, 5 mM sodium salicylate added at zero time. RLU, relative light units.
|
|
View this table: [in a new window] |
TABLE 3. Chemical sensitivities of E. coli strains with and without the YhcP efflux pumpa
|
Growth inhibition of DPD2444 (yhcP) and E. coli MG1655 (yhcP+) by additional compounds was tested (Table 3). Reliable differences between the two strains were defined as the condition with both a twofold or greater difference in MIC between the two strains and a rank (see Materials and Methods) at least 2. A slight difference in growth inhibition of the two strains by cinnamic acid was observed in this test, confirming the results from the Phenotype MicroArrays, but this difference was far less than that obtained by pHBA treatment. Accordingly, the only compounds defined as substrates of the YhcP efflux pump by this genetic test are pHBA, 6-hydroxy-2-naphthoic acid, and 2-hydroxycinnamate. Thus, this efflux system has a very high degree of specificity to certain hydroxylated, aromatic carboxylic acids.
Required components of the yhcRQP operon for efflux function. The nearly complete lack of induction of yhcRQP operon in the yhcS regulatory mutant (Table 2) suggests that such a mutant may be less effective at pHBA efflux. Indeed, duplicate experiments with Vogel-Bonner agar medium showed that the filter paper disks each containing 80 µmol of pHBA produced a zone of inhibition of 20.2 mm in diameter in a yhcS mutant (DPD2433), in comparison with 9.5 mm in the wild-type strain MG1655.
Assays of zone of growth inhibition were carried out under the same conditions with DPD2433 carrying derivatives of pTrcHis2TOPO in which various genes of the yhcRQP operon were expressed from the trc promoter. We found that the expression of the entire yhcRQP operon (pDEW668) or yhcQP genes (pDEW673) produced pHBA resistance, with inhibition zones of 9.8 and 9.5 mm, whereas expression of yhcRQ alone (pDEW675) produced only marginal resistance (17.0 mm) in comparison with cells containing the control plasmid, pTrcHis2TOPO/lacZ (23.5 mm). Similarly, expression of yhcP alone in the vector pKK223-3 did not produce any resistance (18.8 mm) in comparison with DPD2433 containing the vector alone (19.2 mm). Accordingly, expression of yhcP and yhcQ was both necessary and sufficient to fully reverse the pHBA sensitivity conferred by the yhcS mutation. Thus, we conclude that the products of both yhcP and yhcQ are required for function of this aromatic carboxylic acid efflux system. These results do not indicate a requirement for yhcR in this efflux system. However, since low-level yhcR expression in the yhcS strain is possible, such a role cannot be ruled out entirely. Several attempts to construct a nonpolar deletion of yhcR to further address its function were unsuccessful for unknown reasons.
Genetic evidence that that the tolC-encoded outer membrane factor is not required for efflux function of yhcQP. Numerous efflux systems in E. coli and other gram-negative bacteria are comprised of an inner membrane pump protein, a periplasmic MFP, and an outer membrane OMF protein (35). In analogy, with consideration that YhcQ is an MFP, it may be expected that the YhcQP efflux system for aromatic carboxylic acids would function with an OMF protein. In E. coli, tolC, encoding a OMF protein that works with several different efflux systems (30), is such a candidate. To address the role of TolC, genetic experiments using otherwise isogenic E. coli strains MG1655, DPD1818 (tolC), DPD4233 (yhcS), and DPD2435 (tolC yhcS) were conducted. These four strains were each transformed with control plasmid pTrcHis2TOPO/lacZ or with pDEW668, which expresses the yhcRQP operon. Examination of the strains carrying the control plasmid showed that the mutant strains had increased pHBA sensitivity compared with MG1655 (MIC, 100 mM); the pHBA MIC for yhcS mutant was 18 mM, that for the tolC mutant was 56 mM, and that for the strain carrying both the tolC and yhcS mutations was 13 mM. The slight pHBA hypersensitivity conferred by the tolC mutation suggests the presence of one or more pHBA efflux pumps in E. coli that utilize the TolC channel. However, if the YhcQP efflux system required TolC for function, it is expected that the pHBA MIC for the tolC mutant strain would have been at least as low as that for the yhcS mutant strain. Furthermore, the observation that the MIC for the tolC yhcS double mutant was lower than those for strains carrying either the tolC or yhcS mutation is consistent with independent function of TolC and the YhcQP efflux system. Moreover, the plasmid expressing yhcRQP conferred full pHBA resistance (MIC, 100 mM) in all host strains, including the tolC mutant hosts. Thus, these results indicate that the YhcP efflux pump does not require exclusive use of TolC. Overall, these results can be interpreted as being consistent with the presence of at least two pHBA efflux systems in E. coli, one that uses TolC and the YhcQP system, which does not.
|
|
|---|
In light of the demonstrated function in aromatic carboxylic acid efflux or regulation of expression of the efflux genes, we propose renaming these genes with a mnemonic for aromatic carboxylic acid efflux as follows: aaeB (ychP), aaeA (yhcQ), aaeX (yhcR), and aaeR (yhcS). Other researchers have suggested an alternative designation for yhcS (b3243) of qseA in light of twofold upregulation in response to quorum sensing (44). However, the role in regulation of the aeeXAB efflux operon is clearly biologically relevant, while there are complications in interpretation of cell-to-cell signaling in E. coli (1), and thus the designation aaeR is appropriate. Nevertheless, a role of AaeR in quorum sensing cannot be ruled out from our data.
The AaeAB efflux system is distinct from many efflux pumps in E. coli that use the TolC channel-tunnel, as we found no evidence that TolC was required for AaeAB function. At present, it is not known whether one of the other OMF family members present in the E. coli genome, i.e., CusC, YohG, or YjcP, works with the AaeAB efflux system. Alternatively, this efflux system may use another type of outer membrane protein for efflux or may not require an outer membrane component. Interestingly, AaeA is predicted to have an alpha-helical barrel similar to that present in TolC; however, the significance of the predicted structure is not known (38).
Likewise, the significance of aaeX is not known. However, it is interesting to consider that in the CusCFBA copper and silver efflux system, the 10-kDa CusF protein is a periplasmic copper binding protein that is required for maximal efficiency of copper efflux (13). Thus, it is possible that AaeX may play a similar role in the efflux mediated by AaeAB but was not detected in our experiments.
The substrate specificity of the AaeAB efflux system is very narrow, being limited to hydroxylated aromatic carboxylic acids. This is in distinct contrast to multidrug efflux systems, such as AcrAB-TolC. The substrate specificity for inducers of aeeXAB expression and thus presumably for binding to the AeeR regulator is somewhat broader in that both nonhydroxylated and hydroxylated aromatic carboxylic acids are active. Nonetheless, pHBA is the best inducer and the best substrate among the compounds studied. Of course, pHBA is an intermediate of ubiquinone biosynthesis and thus would normally be expected to be present at very low concentrations in E. coli cells. It is also notable that the basal, "off," level of aaeXAB expression is very low. The bioluminescence of the aaeXAB-luxCDABE reporter in the absence of inducing molecules is very low. Also, the steady-state level of aaeXAB mRNA in minimal or rich medium, estimated from hybridization assays normalized with cellular DNA, is at or slightly above detection limits (52). In contrast, the steady-state expression level of the aaeR regulatory gene as quantitated by an aaeR-luxCDABE gene fusion (Van Dyk, unpublished data) or as measured in the normalized hybridization assay (R. A. LaRossa, personal communication) is substantial. Considering all these observations, we suggest a role of the AaeAB efflux system as a "metabolic relief valve." Accordingly, these proteins are not normally expressed to any significant level, but if a metabolic upset occurs such that pHBA accumulates to high levels in the cell, the expression of the efflux system is activated (Fig. 3). Thus, this highly regulated efflux system may normally function as a response to an intracellular stress condition rather than to an externally imposed stress.
![]() View larger version (17K): [in a new window] |
FIG. 3. Metabolic relief valve model for AaeAB efflux pump expression. A. In normal E. coli cellular metabolism, pHBA is an intermediate in ubiquinone biosynthesis, and its intracellular concentration is likely very low. In this situation, the regulatory gene aaeR is expressed, but the positive regulator is in an inactive form as depicted by the circle. Accordingly, expression of the genes encoding the efflux pump, aaeA and aaeB, which requires the active form of the regulatory protein for expression, is very low. B. In a situation of a metabolic upset when the intracellular concentration of pHBA is abnormally high, the AaeR regulator binds pHBA and is converted to the active form as depicted by the square, thus activating transcription of the efflux pump genes. Expression of the efflux pump proteins thus results in removal of excess pHBA and hence in restoration of cellular homeostasis.
|
We thank Dana Smulski for construction of E. coli strain DPD1818, Mary Jane Reeve for data generated with the LuxArray, Jean Francois Tomb and Sean Huang for the E. coli integrated functional genomics database, Robert LaRossa for communication of mRNA expression data, the DuPont Central Research and Development DNA microarray facility, and our colleagues at DuPont Biochemical Sciences and Engineering for fruitful discussions. We also thank Jeff Carlson at Biolog Inc. for the detailed analyses of Phenotype MicroArray data.
|
|
|---|
This article has been cited by other articles:
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Copyright © 2009 by the American Society for Microbiology. For an alternate route to Journals.ASM.org, visit: http://intl-journals.asm.org | More Info»