Previous Article | Next Article ![]()
Journal of Bacteriology, March 2004, p. 1629-1637, Vol. 186, No. 6
0021-9193/04/$08.00+0 DOI: 10.1128/JB.186.6.1629-1637.2004
Copyright © 2004, American Society for Microbiology. All Rights Reserved.
Brian E. Schwem, and Jorge C. Escalante-Semerena*
Department of Bacteriology, University of WisconsinMadison, Madison, Wisconsin
Received 14 October 2003/ Accepted 10 December 2003
|
|
|---|
|
|
|---|
![]() View larger version (25K): [in a new window] |
FIG. 1. Structure of tricarballylate and related analogs.
|
![]() View larger version (13K): [in a new window] |
FIG. 2. Reduction of trans-aconitate to tricarballylate. 2e-, reducing equivalent carried by an unidentified electron carrier.
|
Of particular interest to us was the report by Gutnik et al. that Salmonella enterica can grow on tricarballylate as a sole source of carbon and energy (14). To date, neither the biochemistry nor the genetics of tricarballylate catabolism has been studied for this bacterium. Interestingly, E. coli (a close relative of S. enterica) cannot grow on tricarballylate or related compounds such as citrate, cis-aconitate, or isocitrate (Fig. 1) (20, 27, 35), a fact that correlates with the absence in the E. coli genome of the set of genes identified by the work reported here as the ones needed to catabolize tricarballylate (4).
The work reported here identifies a set of three open reading frames (ORFs) of previously unknown function and the gene previously known as citA, which are all required for the utilization of tricarballylate as a carbon and energy source by S. enterica. These genes are hereafter referred to as the tricarballylate utilization (tcu) genes, of which two are proposed to encode tricarballylate catabolic enzymes, namely tcuA (formerly ORF STM0691) and tcuB (formerly citB, ORF STM0690). The tcuC gene (formerly citA, STM0689) encodes a protein likely to transport tricarballylate across the inner membrane, and the tcuR gene (formerly ORF STM0692) is likely to encode a regulatory protein that modulates the expression of the tcuABC genes. As noted above, the tcuB gene was formerly known as citB and had an undetermined role in citrate catabolism, and the tcuC gene was previously identified as citA (a citrate transporter) (35, 36). On the basis of the work reported here, the names of these genes have been changed to tcuB and tcuC, respectively, to reflect their true role in S. enterica physiology and to distinguish them from other cit genes in the literature (32). The inability of E. coli to use tricarballylate was used to identify the full complement of S. enterica genes required for the catabolism of this tricarboxylic acid. A model for tricarballylate catabolism in S. enterica is proposed.
|
|
|---|
|
View this table: [in a new window] |
TABLE 1. Strains and plasmids used in this study
|
Isolation of tcu mutants carrying insertions of the Tn10
16
17 element.
A pool of mutant strains (ca. 100,000), each containing the transposition-defective Tn10
16
17 element (hereafter referred to as Tn10d(tet+) (40), was prepared as described elsewhere (12). Strain TR6583 was transduced to tetracycline resistance with P22 lysate grown on the pool of strains carrying Tn10d(tet+) elements. Tetracycline-resistant (Tcr) transductants were replica printed onto NCE medium supplemented with either succinate or tricarballylate as a carbon and energy source. Tcr transductants able to grow on succinate but not tricarballylate were freed of phage and analyzed further.
Isolation of a MudI1734 (MudJ) element near tcuC.
A pool of mutant strains (ca. 50,000), each containing a MudI1734 (lacZYA kan+) element (hereafter referred to as MudJ) was prepared as described (8, 18). Strain JE5174 [tcuC35::Tn10d(tet+)] was transduced to kanamycin resistance by using a P22 lysate grown on a pool of
50,000 strains, each carrying one MudJ element inserted in the chromosome. Kanamycin-resistant (Kmr) transductants were replica printed onto NCE medium supplemented with tricarballylate and kanamycin. Kmr transductants able to grow on tricarballylate were freed of phage and analyzed further. The physical location of the MudJ element near the tcu genes was determined by sequencing the region of DNA flanking the element by using PCR amplification protocols described elsewhere (7, 17, 23).
Isolation of MudJ elements in tcuR and tcuA.
Strain JE5174 [tcuC35::Tn10d(tet+)] was transduced to kanamycin resistance by using a phage P22 lysate grown on a pool of
50,000 strains, each of which carried one MudJ element in the chromosome. Kmr transductants were replica printed to LB-Tc plates to identify clones that were Kmr and Tcs, i.e., strains with a MudJ element near the tcuRABC operon. Kmr Tcs colonies were freed of phage, and their ability to grow on tricarballylate as a carbon and energy source was assessed. Kmr strains unable to grow on tricarballylate were studied further. The precise location of the insertion was determined by arbitrary PCR mapping. Strain JE7212 contains a tcuA33::MudJ insertion, and JE7213 contains a tcuR34::MudJ insertion.
Localized chemical mutagenesis of the tcuRABC genes. Random mutagenesis of the region containing the tcuRABC genes was achieved by the method of Hong and Ames (16), as described (11). For this purpose, we first isolated a MudJ element in the ybfM (ORF STM0687) gene, which is one gene away from tcuC and was shown to be 94% cotransducible with tcuC by phage P22. A bacteriophage P22 lysate grown on strain JE5188 (ybfM106::MudJ) was mutagenized with hydroxylamine, and the mutagenized phage lysate was used as the donor to transduce strain TR6583 (tcuRABC+) to kanamycin resistance on LB medium containing kanamycin. Thirty Kmr transductants unable to grow on tricarballylate were isolated after the selection plates were replica printed onto minimal medium containing kanamycin and citrate or tricarballylate as the carbon and energy source.
Construction of recombination-deficient tcu mutants. Phage P22 lysate grown on strain JE2397 [srl-203::Tn10d(cat+) recA1] was used to transduce strains to chloramphenicol resistance. Chloramphenicol resistant (Cmr) transductants that coinherited the recA1 allele were identified by their sensitivity to UV irradiation.
Recombinant DNA techniques.
Restriction and modification enzymes were purchased from Promega unless stated otherwise and were used according to the manufacturer's instructions. All DNA manipulations were performed in E. coli DH5
. Plasmids were transformed into cells by CaCl2 heat shock as described elsewhere (19). Plasmids transferred from E. coli into S. enterica were first introduced into the restriction-deficient, modification-proficient S. enterica strain JR501 by transformation (38). Plasmid DNA was isolated by using the Wizard Plus SV Plasmid Miniprep kit from Promega as per the manufacturer's instructions. DNA fragments were isolated from 1% (wt/vol) agarose gels and purified by using the Qiaquick Gel Extraction kit (QIAGEN). PCRs were purified by using the Qiaquick PCR purification kit from QIAGEN as suggested by the manufacturer. Nonradioactive sequencing was performed at the Biotechnology Center at the University of WisconsinMadison.
Plasmid constructions.
Plasmids were propagated in E. coli strain DH5
except where noted. Genomic DNA for PCR was prepared from S. enterica strain JE6583 by using the MasterPure Genomic DNA Purification kit from Epicentre Technologies. All primers used for PCR amplifications were purchased from Integrated DNA Technologies.
Plasmid pTCU5. The tcuC gene of S. enterica was PCR amplified from TR6583 by using conditions previously described (17). For the PCR, the primers contained Gateway (GIBCO BRL) recombination sites and the sequences (without att sites) were as follows: for the 5'-tcuC primer, 5'-CCGCAACATCTTACCTATA-3', and for the 3'-tcuC primer, 5'-GGGTAACGATCAGGCGGTCAAG-3'. The 1.4-kb PCR product was purified by using the QIAquick PCR purification kit (QIAGEN) and cloned into the pDONR201 vector by using the Gateway BP reaction according to the manufacturer's instructions. The resulting plasmid was 4-kb long, provided resistance to kanamycin, and was referred to as plasmid pTCU3. The tcuC gene was moved from plasmid pTCU3 into a Gateway-compatible pBAD30 plasmid (15) by using the Gateway LR reaction. The resulting plasmid was 6.4 kb, encoded ampicillin resistance, and was named pTCU5.
Plasmid pTCU8. The tcuA gene was cloned into pBAD30 by using a Gateway LR reaction. The Gateway-compatible region was in the SmaI site of plasmid pBAD30. Plasmid pTCU8 was 6.4 kb and encoded ampicillin resistance.
Plasmid pTCU18. The tcuR gene was cloned into pBAD30 by using a Gateway LR reaction. This plasmid is a minimal gene clone of tcuR. The Gateway-compatible region was in the SmaI site on pBAD30. This plasmid was 6.4 kb and encoded ampicillin resistance.
Plasmid pTCU19. The tcuB gene of S. enterica was PCR amplified by using primers with built-in restriction sites (the restriction sites are underlined in the sequences). The 5' primer contained a KpnI site, 5'-AATTATAGGTACCAATGTTCTGGGCAAGGGGTAT-3', and the 3' primer contained a XbaI site, 5'-AATTATATCTAGAGTTCAAGGAAATTGCCGCTT-3'. The 1,381-bp PCR product was cut with KpnI and XbaI restriction enzymes and cloned into pBAD30 cut with the same enzymes. Plasmid pTCU19 was 6.1 kb and encoded ampicillin resistance.
Plasmid pTCU21. The tcuABC genes of S. enterica were PCR amplified by using primers with built-in restriction sites (the restriction sites are underlined in the sequences). The 5' primer contained a KpnI site (5'-AATTATAGGTACCGGTACGGGAGTATAAGATGGT-3'), and the 3' primer contained an XbaI site (5'-AATTATATCTAGATAACGATCAGGCGGTCAA-3'). The 4,022-bp PCR product was cut with KpnI and XbaI restriction enzymes and cloned into pBAD30 cut with the same enzymes. pTCU21 was 9.1 kb and encoded ampicillin resistance.
Complementation analysis. Strains unable to grow on tricarballylate were transformed with plasmids containing wild-type alleles of tcuR (plasmid pTCU18), tcuA (plasmid pTCU8), tcuB (plasmid pTCU19), or tcuC (plasmid pTCU5). Drug-resistant transformants were patched onto LB agar supplemented with the appropriate antibiotic and replica printed to NCE medium containing tricarballylate and antibiotic. NCE medium containing glucose and antibiotic was used as the control for growth. Representative mutant alleles of each gene were sequenced to verify the location of the mutation. Growth curves were performed in liquid culture by using NCE-tricarballylate with antibiotic, with or without arabinose (250 µM or 500 µM, as noted) as the inducer of the tcu gene carried by the plasmid.
|
|
|---|
tcuC function is not sufficient for growth on tricarballylate. E. coli K-12, a bacterium known to be unable to grow on citrate or tricarballylate, was used to assess whether tcuC function was sufficient to allow growth on tricarballylate. For this purpose, plasmid pTCU5 (tcuC+) was introduced into E. coli K-12 and growth on citrate or tricarballylate was assessed in liquid medium. Consistent with previous studies (35), introduction of tcuC+ into E. coli allowed growth of this bacterium on citrate (Fig. 3A). This result was consistent with the hypothesis that the inability of E. coli to grow on citrate is exclusively due to the lack of transport of this compound across the cell membrane of this bacterium. However, the presence of plasmid pTCU5 (tcuC+) did not allow E. coli K-12 to grow on tricarballylate (data not shown), suggesting that additional functions present in S. enterica were needed for tricarballylate catabolism.
![]() View larger version (24K): [in a new window] |
FIG. 3. tcuABC functions allow growth of E. coli K-12 on citrate (A) or tricarballylate (B). In all graphs, pBAD30 is the empty cloning vector. (A) Cells were grown aerobically in NCE medium containing citrate (20 mM). Open triangles, growth response of E. coli strain K-12 on citrate medium containing 500 µM L-(+)-arabinose; closed circles, growth response of E. coli strain K-12 with tcuC+ provided in trans (plasmid pTCU5) in medium lacking L-(+)-arabinose; open diamonds, growth response of the same strain in medium containing 500 µM L-(+)-arabinose. (B) Cells were grown aerobically in NCE medium containing tricarballylate (20 mM). Solid triangles, growth response of a S. enterica strain with a wild-type tcuRABC+ set of genes (strain JE2397); open triangles, growth response of E. coli strain K-12 carrying empty cloning vector pBAD30 in medium supplemented with 500 µM L-(+)-arabinose; solid circles, growth response of E. coli strain K-12 carrying plasmid pTCU21 (tcuABC+) in medium lacking L-(+)-arabinose; open diamonds, growth response of the same strain in medium containing 250 µM L-(+)-arabinose.
|
![]() View larger version (14K): [in a new window] |
FIG. 4. Location and nature of the mutations affecting S. enterica tcu functions. Insertion mutations are represented by solid (MudJ elements) or open [Tn10d(tet+) elements] inverted triangles, while the solid circles represent point mutations. Arrows above MudJ insertions indicate the direction of transcription of the lacZ gene in the MudJ element. Arrows at the ends of the tcuR and tcuA genes represent the promoters for each gene.
|
The tcuB gene (ORF STM0690; 1,140 bp). The tcuB gene was previously identified as citB during the sequencing of citA, but a function for the CitB protein was not established (35). The predicted amino acid sequence of the TcuB protein (379 aa, 42 kDa) has some interesting features. The N-terminal region of the protein displayed two distinct cysteine motifs that matched the consensus C-X2-C-X2-C-X3-C-X sequence found in proteins with iron-sulfur centers (21). These motifs are located at residues 28 to 38 and 62 to 72 in the TcuB sequence (Fig. 5). Unlike the N terminus, the C-terminal region of TcuB appears to be very hydrophobic from about residue 112 to the end of the polypeptide, suggesting that TcuB may be membrane associated (data not shown).
![]() View larger version (20K): [in a new window] |
FIG. 5. TcuB contains two conserved Cys-X2-Cys-X2-Cys-X3-Cys-X motifs characteristic of proteins containing 4Fe-4S centers. The conserved Cys residues are shown in boxes. DmsB, dimethyl sulfoxide reductase subunit B; FrdB, fumarate reductase Fe-S subunit; NarH, nitrate reductase Fe-S subunit.
|
The tcuR gene (ORF STM0692; 927 bp). The TcuR protein (308 aa, 33 kDa) is 31% identical and 53% similar to the nitrogen assimilation control (Nac) protein from E. coli and Klebsiella aerogenes. The Nac protein activates the transcription of the hutUH and ureDABCEFG operons, which are required for converting histidine and urea into useable nitrogen sources (13, 22). The Nac protein is a member of the LysR family of transcriptional regulators (24), which have DNA-binding domains at the N terminus of the protein and coeffector-binding sites at the C terminus (28). Consistent with other LysR family members, TcuR was homologous to other family members at the DNA-binding domain but shared little similarity at the C terminus (data not shown).
Defining tcu functions by mutation and complementation analysis. To obtain evidence that the tcuA, tcuB, and tcuR genes were involved in tricarballylate catabolism, point mutations in each one of these genes were isolated and the nature of several mutations was determined by DNA sequencing. The schematic of the tcuRABC genes shown in Fig. 4 indicates the location of lesions identified in tricarballylate-deficient strains by DNA sequencing. The growth response of recombination-deficient (recA) derivatives of representative tcu mutants carrying plasmids containing the wild-type allele of a tcu gene under the control of the arabinose-inducible ParaBAD promoter is shown in Fig. 6.
![]() View larger version (37K): [in a new window] |
FIG. 6. tcuRABC functions are all required for tricarballylate catabolism. In all cases, pBAD30 refers to the empty cloning vector, and recA refers to allele recA1. Cells were grown aerobically in NCE medium containing tricarballylate (20 mM) with the exception of those for panel C, where 1 mM glycerol was also added to the medium. (A) Complementation of a tcuR mutant. Open diamonds, growth response of a tcuR+ strain (JE4271); open triangles, growth response of a tcuR strain (JE6329); solid circles, growth response of a tcuR strain (JE6329) with tcuR+ provided in trans (pTCU18) in medium lacking L-(+)-arabinose; solid triangles, growth response of the same strain in medium containing 500 µM L-(+)-arabinose. (B) Complementation of a tcuA strain. Open diamonds, growth response of a tcuA+ recA strain (JE2397); open triangles, growth response of a tcuA recA strain (JE7586); solid circles, growth response of a tcuA recA strain (JE7586) with tcuA+ provided in trans (plasmid pTCU8) in medium lacking L-(+)-arabinose; solid triangles, growth response of the same strain in medium containing 500 µM L-(+)-arabinose. (C) Marker rescue of a tcuB strain. Open diamonds, growth response of a tcuB+ strain (JE4271); open triangles, growth response of a tcuB strain (JE6335); solid triangles, growth response of a tcuB strain (JE6335) with tcuB+ provided in trans (plasmid pTCU19). (D) Complementation of a tcuC strain. Open diamonds, growth response of a tcuC+ recA strain (JE2397); open triangles, growth response of a tcuC recA strain (JE7585); solid circles, growth response of a tcuC recA strain (JE7585) with tcuC+ provided in trans (plasmid pTCU5) in medium lacking L-(+)-arabinose; solid triangles, growth response of the same strain in medium containing 500 µM L-(+)-arabinose.
|
In vivo evidence that tcuR and tcuABC are two transcriptional units. In vivo evidence in support of the conclusion that tcuR and tcuABC are two independent transcriptional units is presented in Fig. 7. The rationale of this experiment is that a MudJ (lacZYA kan+) insertion will have polar effects on cotranscribed downstream genes. To study the organization of the tcuRABC genes, recombination-deficient derivatives of strains carrying MudJ insertion mutations in the tcuR (JE7213) and tcuA (JE7212) genes were constructed and their growth on tricarballylate was assessed. When plasmid pTCU18 (tcuR+) was provided in trans in strain JE7286 (tcuR34::MudJ recA), the strain grew on tricarballylate (Fig. 7A). This result suggested that the tcuR34::MudJ mutation was not polar on tcuABC expression. In contrast, when plasmid pTCU8 (tcuA+) was provided in trans in strain JE7287 (tcuA33::MudJ recA1), complementation was not observed (Fig. 7B). Strain JE7287 did grow on tricarballylate when plasmid pTCU21 (tcuABC+) was provided in trans (Fig. 7B, open diamonds). Growth of strain JE7287 in the absence of inducer (Fig. 7B, solid circles) was explained by residual transcription of the tcuABC genes from the ParaBAD promoter. These results suggested that the tcuA::MudJ insertion had a negative effect on tcuBC expression.
![]() View larger version (26K): [in a new window] |
FIG. 7. Genetic evidence that tcuR and tcuABC are two distinct transcriptional units. In the graphs shown, pBAD30 refers to empty cloning vector, tcuR::MudJ refers to allele tcuR34::MudJ, tcuA::MudJ refers to allele tcuA33::MudJ, and recA refers to allele recA1. Cells were grown aerobically in NCE medium containing tricarballylate (20 mM). (A) Complementation of a tcuR strain. Open diamonds, growth response of a tcuR+ recA1 strain (JE2397); open triangles, growth response of a tcuR34::MudJ recA1 strain (JE7286); solid circles, growth response of a tcuR34::MudJ recA1 strain with tcuR+ provided in trans (plasmid pTCU18) in medium lacking L-(+)-arabinose; solid triangles, growth of the same strain in medium containing 500 µM L-(+)-arabinose. (B) Complementation of a tcuA strain. Open diamonds, growth response of a tcuRABC+ recA1 strain (JE2397); solid squares, growth response of a tcuA33::MudJ recA1 strain (JE7287); open triangles, growth of a tcuA33::MudJ recA1 strain (JE7287) with tcuA+ provided in trans (plasmid pTCU8) in medium containing 500 µM L-(+)-arabinose; solid circles, growth response of a tcuA33::MudJ recA1 strain (JE7287) with tcuABC+ provided in trans (plasmid pTCU21) in medium lacking L-(+)-arabinose; open diamonds, growth of the same strain in medium containing 250 µM L-(+)-arabinose.
|
Tricarballylate catabolism does not proceed via the glyoxylate shunt. The aceA gene encodes for isocitrate lyase, a key enzyme of the glyoxylate shunt. To investigate whether the glyoxylate shunt played a role in tricarballylate catabolism, growth of aceA mutant strain JE4172 on tricarballylate was assessed (Fig. 8). Acetate utilization was used as a negative control. In contrast, strain JE4561, lacking isocitrate dehydrogenase (icd) function, a key function of the Krebs cycle, failed to grow on tricarballylate when it was supplemented with glutamate (data not shown). Taken together, these results indicated that tricarballylate catabolism proceeded via the Krebs cycle and that the glyoxylate shunt is not required for growth of S. enterica on tricarballylate.
![]() View larger version (24K): [in a new window] |
FIG. 8. Tricarballylate catabolism does not proceed via the glyoxylate bypass. In the graphs described below, aceA refers to allele aceA112::MudJ. Cells were grown aerobically in NCE medium containing either tricarballylate (20 mM) or acetate (30 mM). Solid triangles, growth response of an aceA+ strain (TR6583) on tricarballylate; open diamonds, growth response of the same strain on acetate; solid circles, growth response of an aceA strain (JE4172) on tricarballylate; open triangles, growth of the same strain on acetate.
|
![]() View larger version (84K): [in a new window] |
FIG. 9. Model for tricarballylate catabolism in S. enterica. ets, electron transport system; TCA, tricarboxylic acid; 2e-, reducing equivalent.
|
We thank Tenzin Paldon for technical assistance.
Present address: Department of Chemistry, The Pennsylvania State University, University Park, PA 16802. ![]()
|
|
|---|
-Methyl-cis-aconitate and threo-Ds-
-methylisocitrate as substrates. Biochemistry 23:4572-4580.[CrossRef][Medline]
This article has been cited by other articles:
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Copyright © 2009 by the American Society for Microbiology. For an alternate route to Journals.ASM.org, visit: http://intl-journals.asm.org | More Info»