Previous Article | Next Article ![]()
Journal of Bacteriology, April 2004, p. 2156-2163, Vol. 186, No. 7
0021-9193/04/$08.00+0 DOI: 10.1128/JB.186.7.2156-2163.2004
Copyright © 2004, American Society for Microbiology. All Rights Reserved.
and Matthias Boll1*
Institut für Biologie II, Albert-Ludwigs-Universität, Freiburg,1 Mikrobiologie, Department für Biologie I, Ludwig-Maximilians-Universität, Munich, Germany2
Received 29 July 2003/ Accepted 11 December 2003
|
|
|---|
100, 30, and 27 kDa were detected by sodium dodecyl sulfate-polyacrylamide gel electrophoresis analysis. The 100- and 30-kDa selenoproteins were 5- to 10-fold induced in cells grown on benzoate compared to cells grown on lactate. These results suggest that the dearomatization process in D. multivorans is not catalyzed by the ATP-dependent Fe-S enzyme benzoyl-CoA reductase as in facultative anaerobes but rather involves unknown molybdenum- and selenocysteine-containing proteins. |
|
|---|
So far, benzoyl-CoA reductase activity has been detected in cell extracts of the denitrifying bacterium T. aromatica (30), the closely related Azoarcus evansii (15) (both members of the ß subdivison of Proteobacteria), and the phototrophic Rhodopseudomonas palustris (
subdivision of Proteobacteria) (30), all facultative anaerobic organisms. The primary sequences of benzoyl-CoA reductases from several facultative anaerobes show a high level of similarity to each other (14, 16). This extremely oxygen-sensitive enzyme has been purified from extracts of T. aromatica (6). The enzyme contains three [4Fe-4S] clusters (8) and couples the two-electron reduction of the aromatic moiety of benzoyl-CoA to a stoichiometric hydrolysis of two ATP (10). The product of the two-electron reduction is cyclohexa-1,5-diene-1-carbonyl-CoA (5).
Widdel (44) was the first to isolate strictly anaerobic bacteria capable of utilizing aromatic compounds and sulfate as their sole energy and carbon sources. He found that some sulfate-reducing bacteria, including Desulfococcus multivorans, require the trace elements molybdenum and selenium for growth on benzoate. To date, utilization of aromatic compounds has been demonstrated for several sulfate-reducing bacteria from different phylogenetic groups, such as D. multivorans, Desulfosarcina variabilis, Desulfonema magnum, and Desulfobacula toluolica, as well as several Desulfobacterium and Desulfotomaculum strains (34). However, little is known about the metabolism of aromatic compounds in strictly anaerobic bacteria. The free-energy change of complete benzoate oxidation with sulfate (-203 kJ mol-1) is 1 order of magnitude lower than with nitrate (
-3,000 kJ mol-1). Complete oxidation of benzoic acid by sulfate-reducing bacteria proceeds via the following equation: C7H6O2 + 4 H2O + 3.75 SO42-
7 HCO3- + 3.75 HS- + 3.25 H+ (
G° = -203 kJ mol-1) (42).
In strictly anaerobic syntrophic consortia utilizing aromatic compounds, the energy situation is even less favorable (42). Considering these energy limitations, it was surprising that an AMP-forming benzoate CoA ligase activity was found in syntrophic consortia (1, 18, 39) and in a sulfate-reducing bacterium (37). It is unknown whether the energy-consuming activations represent a general feature of aromatic acid metabolism in obligate anaerobic bacteria. Even if aromatic metabolism could proceed close to the thermodynamic equilibrium (23), the presence of an additional ATP-consuming benzoyl-CoA reductase, as in T. aromatica (consuming two ATP/benzoyl-CoA reduced) is questionable for strictly anaerobic bacteria.
Schöcke and Schink (39) provided evidence that in the syntrophic Syntrophus gentiana a two-electron reduction of benzoyl-CoA, as reported for T. aromatica, is thermodynamically impossible; they suggested that at least a four-electron reduction of the aromatic ring to a cyclohexene-1-carbonyl-CoA derivative would be required. Further evidence for this notion was obtained from experiments with Syntrophus aciditrophicus strain SB. This fermenting bacterium formed [13C]cyclohexanecarboxylate from [13C]benzoate, indicating a six-electron reduction of the benzene ring (17). Very recently, it has been demonstrated that this Syntrophus strain was even able to use benzoate as a sole carbon and energy source in the absence of an H2-consuming coculture (18).
In this work, the initial enzymatic step of benzoate metabolism was studied in the strictly anaerobic model organism D. multivorans (
group of Proteobacteria). Because no molybdenum or selenium enzymes are known to be involved in the anaerobic aromatic metabolism in denitrifying bacteria, the dependence of D. multivorans on these trace elements during growth on benzoate was reinvestigated. The results provide evidence that the initial step in benzoate metabolism is catalyzed by an AMP-forming benzoate CoA ligase and is thus identical to those in facultative anaerobes. In contrast, the strict dependence on the trace elements selenium and molybdenum and the induction of selenocysteine-containing proteins suggest that the subsequent step of benzoyl-CoA dearomatization in D. multivorans differs from that in facultative anaerobic bacteria.
|
|
|---|
Assay of benzoate CoA ligase.
Benzoate CoA ligase activity, as well as the stoichiometry of AMP formation, substrate specificity, and Km values for benzoate, ATP, and CoA, were determined at 37°C using a coupled continuous spectrophotometric assay, as described previously (47). Briefly, the formation of AMP (reaction 1) was coupled enzymatically to myokinase (reaction 2), pyruvate kinase (reaction 3), and lactate dehydrogenase (reaction 4); oxidation of NADH was monitored spectrophotometrically at a
of 365 nm (
NADH = 3.4 x 103 M-1 cm-1):
![]() | (1) |
![]() | (2) |
![]() | (3) |
![]() | (4) |
For determination of the substrate preference of purified benzoate CoA ligase, the reaction was started by the addition of various carboxylic acids (2 to 4 mM [see Table 3]). For the determination of the apparent Km values of benzoate, MgATP, and CoA, the reaction was started with various concentrations of the respective substrates (0.2 to 10 times the Km value). The other components of the assay were present at the following concentrations: 0.5 mM benzoate, 0.5 mM CoA, 2 mM ATP, and 10 mM MgCl2. The Km values were determined by fitting the data to Michaelis-Menten curves using the Prism GraphPad software package (Graphpad Software Inc., San Diego, Calif.). Km values were derived from three different measurements, with a minimum of four different substrate concentrations. The stoichiometry between benzoate consumption and NADH oxidation was determined by adding benzoate at limiting concentrations; the amount of NADH consumed was estimated from
A365. The protein concentration was determined by the method of Bradford (13) using bovine serum albumin as a standard. Purity control was by sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) (31).
|
View this table: [in a new window] |
TABLE 3. Substrate preference of benzoate CoA ligase from D. multivorans
|
Ammonium sulfate precipitation and dialysis. The soluble protein fraction obtained after ultracentrifugation was precipitated with a saturated ammonium sulfate solution, pH 7.8, containing 1 mM Na2EDTA to 33% saturation. After centrifugation (12,000 x g for 15 min), the ammonium sulfate in the supernatant was increased to 55% saturation. The resulting precipitate was dissolved in 7.6 ml of basal buffer (10 mM Tris-HCl, pH 7.8, 2 mM MgCl2, 2 mM DTE) and dialyzed twice for 12 h each time against basal buffer (exclusion mass, 12 to 14 kDa; Medicell International Ltd., London, England).
DEAE-Sepharose chromatography. The dialyzed protein solution was applied at a flow rate of 1 ml min-1 to a DEAE-Sepharose column (Fast Flow; diameter, 10 mm; volume, 10 ml; Amersham Biosciences), which had been equilibrated with basal buffer. The column was washed with 30 ml of basal buffer and then with 20 ml of 50 mM KCl in basal buffer. The ligase was eluted with a linear gradient of 50 to 200 mM KCl in basal buffer (100 ml). Fractions (5 ml) were collected and tested for benzoate CoA ligase activity.
Q-Sepharose chromatography.
Pooled fractions with benzoate CoA ligase activity were diluted with an equal volume of basal buffer and applied to a fast protein liquid chromatography Hi Load Q-Sepharose column (diameter, 16 mm; volume, 14 ml; Amersham Biosciences) at a flow rate of 2 ml min-1. The column was equilibrated with basal buffer containing 150 mM KCl and was subsequently washed with 20 ml of the same buffer. The ligase was eluted in a linear gradient from 150 to 400 mM KCl in basal buffer (120 ml); the CoA ligase activity eluted at
170 mM KCl.
Affinity chromatography.
The protein fraction containing benzoate CoA ligase activity obtained by Q-Sepharose chromatography was diluted with an equal volume of basal buffer and applied at a flow rate of 1 ml min-1 to a Reactive Green cross-linked agarose column (Reactive Green 19-agarose; diameter, 15 mm; volume, 10 ml; Sigma-Aldrich), which had been equilibrated with 50 ml of basal buffer (1 ml min-1). After being washed with 40 ml of basal buffer, the ligase was eluted in a linear gradient of 0.1 to 1 M KCl in basal buffer (120 ml); the benzoate CoA ligase activity eluted at
650 mM KCl.
Mono Q chromatography.
The benzoate CoA ligase activity-containing pool obtained from affinity chromatography was concentrated to
2 ml by ultrafiltration (exclusion mass, 30 kDa; Amicon, Beverly, Mass.) and dialyzed twice against 1 liter of basal buffer (see above). The enzyme was then applied to a Mono Q anion-exchange column (volume, 1 ml; diameter, 0.5 cm; Amersham Biosciences), which had been equilibrated with basal buffer (flow rate, 1 ml min-1). The column was washed with 5 ml of 150 mM KCl in basal buffer; benzoate CoA ligase was eluted in a 30-ml linear gradient from 150 to 300 ml of KCl. The ligase activity eluted at
180 mM KCl. The ligase was again concentrated to 1.5 ml and frozen after addition of 20% glycerol (final volume). In this form, benzoate CoA ligase was stored at -20°C for several weeks without significant loss of activity.
75Se-labeling studies. An exponentially growing D. multivorans culture supplemented with 20 nM sodium selenite was diluted 1:10 in fresh medium supplemented with 1.2 µM sodium [75Se]selenite (6.4 kBq; addition was made from a 535-MBq mmol-1 stock solution). Benzoate, lactate, or cyclohexanecarboxylate (5 mM each) served as a growth substrate. To compensate for the increasing pH, aliquots of sodium hydrogen sulfate were added to the medium (1 to 5 mM). After growth for 6 days at 30°C (OD578, 0.5 to 0.6), cells were harvested by centrifugation. After being washed with buffer containing 50 mM HEPES, pH 7.0, 10 mM KCl, and 5 mM MgCl2, the cells were disrupted by ultrasonification in the presence of DNase I (0.5 µg ml-1). After centrifugation, the supernatant was subjected to SDS-PAGE analysis (31). In control experiments, the supernatant was incubated with 2 µg of RNase A ml-1 or 1.5 µg of proteinase K for 30 min at 37°C prior to SDS-PAGE. Proteins were stained with Coomassie brilliant blue (46). Phosphorylase b (94 kDa), bovine serum albumin (67 kDa), ovalbumin (43 kDa), carbonic acid anhydrase (30 kDa), and lysozyme (14 kDa) were used as molecular mass standards. Labeled macromolecules were visualized by phosphorimaging of dried gels.
Two-dimensional gel electrophoresis. Two-dimensional gel electrophoresis (Immobiline DryStrip gels, 18 cm; linear pH gradient from pH 3 to 10; Amersham Pharmacia Biotech) was performed using an IPGphor isoelectric focusing system (Amersham Biosciences) in the first dimension, according to the manufacturer's protocol. Before application to the first dimension, cell extracts were dialyzed against 5 mM Tris-HCl, pH 7.8 (4°C; 3 h). Protein (120 to 400 µg per separation) was applied to the IPG strips. Separation in the second dimension was by SDS-10% PAGE (31). For detection of 75Se-labeled proteins on two-dimensional gels, D. multivorans was cultivated in the presence of 1.2 µM [75Se]selenite as described above. In these experiments, a higher specific radioactivity (5.3 MBq/10-ml culture volume) was used than for one-dimensional gels.
N-terminal amino acid sequencing. Purified benzoate CoA ligase was blotted from SDS-polyacrylamide gels to a polyvinylidene difluoride membrane. N-terminal amino acid sequencing was carried out by Michael Kiess (TobLab Co., Munich, Germany), applying a modified Edman degradation protocol (27). Phenylthiohydantoin derivatives of the amino acids were detected by a Procise 492 amino acid sequenator (Applied Biosystems, Weiterstedt, Germany). Amino acid sequence comparisons were performed using the Blast search tool (http://www.ncbi.nlm.nih.gov/BLAST/) with an expected value threshold of 10,000.
|
|
|---|
|
View this table: [in a new window] |
TABLE 1. Purification of benzoate CoA ligase from D. multivoransa
|
![]() View larger version (42K): [in a new window] |
FIG. 1. SDS-polyacrylamide gel of purified benzoate CoA ligase. Lane 1, molecular mass standard; lane 2, benzoate CoA ligase (3 µg) obtained after the last purification step (Mono Q chromatography). Staining was with Coomassie blue.
|
|
View this table: [in a new window] |
TABLE 2. Similarities of the N-terminal amino acid sequences of purified benzoate-CoA ligase from D. multivorans and other characterized benzoate CoA ligases
|
|
View this table: [in a new window] |
TABLE 4. Stoichiometry of benzoate CoA ligase reaction as determined in the coupled spectrophotometric assaya
|
40 h).
![]() View larger version (28K): [in a new window] |
FIG. 2. Effects of Mo (150 nM) and Se (20 nM) on growth of D. multivorans with different energy and carbon sources. At an OD578 of >0.5, the growth rate leveled off, probably due to accumulating sulfide. (A to C) Growth on lactate (20 mM) (A), cyclohexanecarboxylate (B), and benzoate (C) (5 mM each). The media contained Mo (150 nM) and Se (20 nM) (), Mo but no Se ( ), Se but no Mo ( ), and neither Se nor Mo ( ). (D) Growth on benzoate with Mo but no Se ( ) and with Se but no Mo ( ). The arrows indicate addition of the missing trace elements.
|
10 µM selenite inhibited growth.
![]() View larger version (31K): [in a new window] |
FIG. 3. Effects of selenite concentrations on growth of D. multivorans with benzoate. Growth was determined as the OD578 reached after 8 days.
|
60 h). Moreover, only selenium in the form of selenocysteine, and not molybdenum, is known to be covalently incorporated in proteins.
Figure 4 shows SDS-polyacrylamide gels and autoradiographs of dried gels after electrophoretic separation of 75Se-labeled cell extracts. When cells were grown on benzoate, three 75Se-labeled bands with molecular masses of
100, 30, and 27 kDa were detected (Fig. 4A, lane 1). Since the radioactivity was not released from the protein during sample preparation for PAGE (80°C heating), selenium is most probably present in the form of selenocysteine. The absence of any background labeling suggests specific incorporation of 75Se into these proteins. After pretreatment of cell extracts with proteinase K, all labeled bands disappeared on SDS-polyacrylamide gels, whereas RNase treatment had no effect (Fig. 4A, lanes 2 and 3), indicating that all labeled bands are selenoproteins. To examine differential expression of selenium-containing proteins, D. multivorans was grown with [75Se]selenite on either cyclohexanecarboxylate or lactate. The amounts of the 100-kDa selenoprotein were 5- to 10-fold lower in extracts of cells grown on lactate or cyclohexanecarboxylate than for benzoate-grown cells, and the 30-kDa selenoprotein was hardly detectable in cells grown on lactate or cyclohexanecarboxylate (Fig. 4B; only the results with benzoate and lactate are shown). The 27-kDa selenoprotein from lactate- or cyclohexanecarboxylate-grown cells had approximately half the intensity observed in benzoate-grown cells. The differential expression of the 100-kDa band was also detected on Coomassie-stained SDS-polyacrylamide gels (Fig. 4C). The results indicate that production of selenoproteins is induced during growth on benzoate compared to growth on lactate or cyclohexanecarboxylate.
![]() View larger version (107K): [in a new window] |
FIG. 4. SDS-polyacrylamide gel of cell extracts from D. multivorans grown on [75Se]selenite-containing mineral medium. (A and B) Autoradiographs of an SDS-10% polyacrylamide gel (A) and an SDS-12.5% polyacrylamide gel (B). (C) 100-kDa section of the Coomassie blue-stained SDS-12.5% polyacrylamide gel. Lanes 1 to 4 and 7, crude extract of cells grown on benzoate (lane 2, as lane 1, but after treatment of cell extract with proteinase K; lane 3, crude extract after treatment with RNase A); lanes 5 and 8, crude extract of cells grown on lactate; lane 6, 97-kDa molecular mass standard. The protein migration front in panel B is marked by an arrow. The arrow in panel C points to an 100-kDa protein band which is differentially expressed in cells grown on benzoate and lactate.
|
100 kDa were identified (Fig. 5B). However, only the 100-kDa 75Se-labeled protein could be visualized by Coomassie staining on two-dimensional gels (Fig. 5A). It could not be blotted in sufficient amounts for N-terminal amino acid sequence analysis. Therefore, the N-terminal amino acid sequences of the three 75Se-labeled protein bands could not be determined.
![]() View larger version (82K): [in a new window] |
FIG. 5. Two-dimensional SDS-PAGE of proteins from cell extracts of D. multivorans. (A) Coomassie blue-stained two-dimensional SDS-polyacrylamide gel of extracts from cells grown on benzoate. The rectangles mark the positions of the radioactively labeled protein bands. (B) Autoradiograph of a two-dimensional SDS-polyacrylamide gel of extracts from cells grown on benzoate and [75Se]selenite. The vertical dimension is an SDS-10% polyacrylamide gel; the horizontal dimension is isoelectric focusing using a pH gradient as indicated.
|
|
|
|---|
Due to their low expression, the nature of the selenoproteins could not be identified by N-terminal sequencing. This finding suggests that the selenoproteins have high specific activities, as reported for several other selenocysteine-containing enzymes (2, 4). In addition, the growth rates were similar on benzoate and nonaromatic compounds (Fig. 2), indicating that the enzymatic steps involved in dearomatization of the benzene nucleus are not rate limiting for growth of D. multivorans. However, the possibility cannot be ruled out that in addition to selenocysteine-containing proteins D. multivorans contains enzymes with a noncovalently bound Se cofactor, which would escape detection by SDS-PAGE analysis. The 30-kDa selenoprotein exhibits the most significant induction during growth on benzoate. The only known bacterial selenoprotein with a similar molecular mass is selenophosphate synthetase (SelD; 35 ± 2 kDa); it catalyzes the formation of selenophosphate from ATP and selenide (45). However, SelD is involved in anabolic selenocysteine synthesis and is usually expressed only at very low levels. Thus, the 30-kDa protein might be a component of a novel type of bacterial selenoprotein with a specific function in aromatic metabolism.
The simultaneous dependence on molybdenum and selenium for growth on benzoate could be due to the presence of a protein belonging to the family of mononuclear molybdopterin enzymes, in which a selenocysteine of the polypeptide backbone is coordinated with the molybdenum atom at the active site (usually in a 90- to 100-kDa subunit). Characterized examples of such enzymes are involved in formate oxidation belonging to the dimethyl sulfoxide family of molybdenum enzymes, e.g., the formate dehydrogenases of Escherichia coli (FDH-H/N/O) (3, 11, 28) or strict anaerobes (22, 33) and the related tungsten- and selenocysteine-containing formyl-methanofuran dehydrogenases (43). However, a possible specific function of a molybdenum-selenocysteine enzyme in benzoate metabolism could be in benzene ring hydroxylation instead. Many molybdenum enzymes of the xanthine oxidase family hydroxylate heteroaromatic compounds at the carbon atom adjacent to the nitrogen atom (for recent reviews, see references 26 and 32). Among these, nicotinic acid hydroxylase (21) and some xanthine dehydrogenases (40) contain selenium, albeit not as selenocysteine but as an inorganic selenium cofactor. Notably, a putative hydroxylation of the homoaromatic ring of benzoyl-CoA can be considered the reverse of the molybdo-enzyme 4-hydroxybenzoyl-CoA reductase (dehydroxylating) reaction. This member of the xanthine oxidase family catalyzes the reductive removal of the phenolic hydroxyl group from 4-hydroxybenzoyl-CoA, yielding benzoyl-CoA and water, using reduced ferredoxin as an electron donor (9, 12). Reversibility of aromatic ring dehydroxylation could be accomplished with a high-potential electron acceptor (>-100 mV) (9). The adenosine phosphosulfate-sulfite redox couple is in this range; therefore, a putative ring hydroxylation is thermodynamically feasible in sulfate-reducing bacteria. Hydroxylation reactions could activate benzoyl-CoA for a subsequent reductive dearomatization due to the substantial weakening of the aromatic character of a dihydroxylated benzene ring, as in the case of meta-positioned hydroxyl groups. Resorcinol (29) or hydroxyhydroquinone (35), both carrying two meta-positioned hydroxyl groups, are reductively dearomatized by electron donors, such as reduced ferredoxin, without coupling to an exergonic process.
Taken together with the mechanistic and energetic considerations discussed above, the results indicate that novel molybdo- and selenoproteins are involved in benzoyl-CoA metabolism of the strictly anaerobic model organism D. multivorans. These enzymes may represent an alternative to the known ATP-dependent dearomatizing enzymes of facultative anaerobes.
This work was funded by the Deutsche Forschungsgemeinschaft (BO 1565/4-1).
Present address: Department of Microbiology, University of Illinois, Urbana-Champaign, Ill. ![]()
|
|
|---|
This article has been cited by other articles:
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Copyright © 2009 by the American Society for Microbiology. For an alternate route to Journals.ASM.org, visit: http://intl-journals.asm.org | More Info»