Previous Article | Next Article ![]()
Journal of Bacteriology, August 2005, p. 5122-5128, Vol. 187, No. 15
0021-9193/05/$08.00+0 doi:10.1128/JB.187.15.5122-5128.2005
Copyright © 2005, American Society for Microbiology. All Rights Reserved.
Unité Toxines et Pathogénie Bactériennes (URA 2172, CNRS), Institut Pasteur, Paris, France
Received 15 February 2005/ Accepted 27 April 2005
| ABSTRACT |
|---|
|
|
|---|
exsFA and
exsFA
exsFB mutant strains, respectively. Electron microscopy revealed that the exsF mutant spores have defective exosporia. The
exsFA and
exsFA
exsFB spore surfaces are partially and totally devoid of filaments, respectively. Moreover, for all mutants, the crystalline basal layer appeared unstable. This instability revealed the presence of two distinct crystalline arrays that are sloughed off from the spore surface. These results indicate that ExsF proteins are required for the proper localization of BclA on the spore surface and for the stability of the exosporium crystalline layers. | INTRODUCTION |
|---|
|
|
|---|
In the genus Bacillus, the sporulation process begins by an asymmetric septation in the vegetative cell that produces two genome-containing compartments, one large compartment called the mother cell and one small compartment called the forespore. The mother cell then engulfs the forespore, surrounding it with two cell membranes in opposite orientation. Over the course of several hours, several protective structures assemble inside and around the forespore. The forespore is surrounded with a thick layer of modified peptidoglycan, called the cortex, and a multilayered protein shell, called the coat, that covers the cortex. The cortex and the coat contribute to spore protection and to germination (9-11). After a final step of spore maturation, the surrounding mother cell lyses and liberates the mature spore.
In some bacillus species, including Bacillus subtilis, the coat is the outermost layer of the spore. In others, including B. anthracis and the closely related species Bacillus cereus and Bacillus thuringiensis, there is an additional outer structure, called the exosporium. Electron microscopy has revealed that the exosporium is composed of a paracrystalline basal layer with hexagonal periodicity and a hair-like outer layer (2, 16, 18, 20). The basal layer contains two or more crystalline sublayers (2, 12, 16, 43) and the hair-like nap differs in length between strains and between species (16, 20, 38). There is still little known about the structural components of the exosporium crystalline array, whereas the exterior components of the vegetative cell of B. anthracis have been well characterized (13). In rich medium in vitro, B. anthracis synthesizes successively one of two S-layers, one composed of SAP protein and the other composed of EA1 protein. These two S-layer proteins are organized in two-dimensional crystalline arrays (5, 26). Furthermore, during infection in vivo, a poly-
-D-glutamate capsule completely covers an S-layer, which is exclusively composed of EA1 protein (27).
The exosporium is composed of proteins, lipids, and carbohydrates (2, 19, 24, 34). It contains several proteins that are synthesized concomitantly with the cortex and the coat (2, 7, 30). Exosporium-specific glycoproteins are synthesized by B. thuringiensis and by B. cereus (4, 15, 39). Recently, we identified a B. anthracis exosporium glycoprotein (BclA), which is the structural component of the hair-like filaments (37). Spores of
bclA strains are totally devoid of filaments (37, 38). However, the structure of the exosporium crystalline basal layer is unchanged, and a crystalline organization can be observed on both the inner and the outer surface of this basal layer (37).
BclA contains a central region presenting similarity to mammalian collagen proteins. This collagen region consists of GXX collagen-like triplets, including a large proportion of GPT triplets. The number of GXX repeats varies considerably between strains, and this variation is responsible for the length variation of the filament nap covering the outer layer of the exosporium (38). More recently, two O-linked carbohydrate components attached to BclA, a 715-Da tetrasaccharide and a 324-Da disaccharide, have been identified (6). Multiple copies of the tetrasaccharide are linked to the collagen-like region of BclA, whereas the disaccharide may be attached outside of this region; each oligosaccharide may be attached to BclA via a GalNAc linker. The 715-Da tetrasaccharide is composed of three rhamnose residues and an unusual component, named anthrose [i.e., 2-O-methyl-4-(3-hydroxy-3-methylbutamido)-4,6-dideoxy-ß-D-glucose]. The complete structure of this tetrasaccharide has been determined: it is a 2-O-methyl-4-(3-hydroxy-3-methylbutamido)-4,6-dideoxy-ß-D-glucopyranosyl-(1
3)-
-L-rhamnopyranosyl-(1
3)-
-L-rhamnopyranosyl-(1
2)-L-rhamnopyranose. The 324-Da dissacharide is composed of one rhamnose residue and a component identified as 3-O-methyl-rhamnose.
Various studies have attempted to identify other individual proteins from the exosporia of B. cereus and B. anthracis (4, 22, 33, 36, 39). Several proteins have been described to be present in or tightly associated with the exosporium, but their roles in the structural and functional organization of the exosporium remain to be elucidated. Here, we describe two exosporium proteins, ExsFA and ExsFB, which are required for the localization of BclA on the spore surface and which contribute to the stability of the exosporium crystalline layers.
| MATERIALS AND METHODS |
|---|
|
|
|---|
|
B. anthracis spores were prepared as previously described (37).
Preparation of exosporium and cell extracts. The exosporium from strain PF08, used for antibody preparation, was prepared as previously described (37).
Spore extracts were prepared by treatment of spores with extraction buffer containing 50 mM Tris-HCl, pH 10, 8 M urea, and 2% 2-mercaptoethanol, as previously described (37). For analysis of BclA synthesis in sporulating cells, B. anthracis was cultivated in PA medium (20 ml) as previously described (37). Culture samples (1 ml) were taken 8 and 20 h (T+8 and T+20) after entry into sporulation, and cells were pelleted. Cell pellets were resuspended in 1/20 of their initial volume (50 µl) in extraction buffer containing 2% sodium dodecyl sulfate (SDS) and treated as previously described (37). For supernatant analysis, the proteins were precipitated with 10% (vol/vol) trichloroacetic acid and resuspended in 1/50 of their initial volume (20 µl) in Laemmli buffer (21). For immunoblot analysis, 5 µl of cell extract and of trichloroacetic acid-precipitate material were loaded.
Immunoblotting analysis.
Proteins were diluted in Laemmli buffer (21), separated by SDS-12% polyacrylamide gel electrophoresis (PAGE) or SDS-7% PAGE, and transferred onto nitrocellulose sheets (Hybond N; Amersham) with the Bio-Rad Trans-Blot system. The resulting blots were probed with the mouse anti-
bclA exosporium antiserum and with the anti-ExsFA antiserum, both of them used at a 1/2,000 dilution, or with the anti-BclA 35B8 monoclonal antibody used at 1 µg/ml (37). Blots were developed with the ECL Western blotting analysis system (Amersham), diluting the second antibody 1/20,000.
Overproduction and purification of ExsFA. The plasmid pQE30-exsFA was used to transform E. coli strain M15(pREP4) (QIAGEN) and the His6-ExsFA protein was overexpressed as described by QIAGEN by inducing an exponential-phase culture with 1 mM IPTG (isopropyl-ß-D-thiogalactopyranoside) for 4 h at 37°C. His-tagged ExsFA was purified as described by QIAGEN on a Ni-nitrilotriacetic acid agarose column. Purification was performed under denaturing conditions in buffer B (100 mM NaH2PO4, 10 mM Tris-HCl, 8 M urea, pH 8) containing 25 mM imidazole. His6-ExsFA was eluted with buffer B containing 0.3 M imidazole. The protein was dialyzed extensively against phosphate-buffered saline and used for preparation of mouse antisera and immunoblotting analysis.
Antibody preparation.
Mouse anti-
bclA exosporium and anti-ExsFA polyclonal antibodies were obtained after three injections in incomplete Freud adjuvant (purchased from Sigma), at 2-week intervals of 50 µg of exosporium preparation or 20 µg of recombinant ExsFA protein, respectively.
Plasmid constructions. The DNA fragments encoding the exsFA and exsFB genes were amplified by PCR from chromosomal DNA of B. anthracis 7702. ex1F3P and ex1R1P were used as primers for exsFA, and ex2F1P and ex2R1P were used for exsFB (Table 1).
The exsFA and exsFB amplicons were inserted into the HincII site of pUC19 to give pUC19-exsFA (pXP01) and pUC19-exsFB (pXP02).
pAT113-exsFA (pXP03), pFX113-exsFA (pXP04) and pFX113-exsFB (pXP05) containing the genes exsFA and exsFB were constructed by insertion of the exsFA and exsFB amplicons into pAT113 or into pFX113, previously digested with EcoRI and blunt-ended with Vent polymerase.
pAT113-exsFA-Spc (pXP06), pFX113-exsFA-Erm (pXP07) and pFX113-exsFB-Erm (pXP08) containing the disrupted genes exsFA and exsFB were constructed as follows: pAT113-exsFA (pXP03), pFX113-exsFA (pXP04), and pFX113-exsFB (pXP05) were digested with EcoRI, blunt ended with Vent polymerase, and then ligated to the XbaI fragment of pUC1318Spc or the SmaI fragment of pUC1318Erm containing the spectinomycin resistance and erythromycin resistance cassettes, respectively.
The exsFA and exsFB genes were also inserted into the eag gene as follows. The BamHI-HindIII fragments of pUC19-exsFA (pXP01) and pUC19-exsFB (pXP02) were blunt ended with Vent polymerase and ligated to pSAL322, itself digested with BamHI and blunt ended to give pSAL322-exsFA (pXP09) and pSAL322-exsFB (pXP10), respectively.
To overproduce and purify ExsFA, a DNA fragment corresponding to the exsFA sequence was amplified by PCR with oligonucleotides ex1F5B and ex1R5H (Table 1). These primers added BamHI and HindIII restriction sites just 3' to the start codon and just 3' to the stop codon of the exsFA gene, respectively. This amplicon was inserted into the pGEM-T-Easy plasmid to give pGEM-exsFA. The 0.5-kb BamHI-HindIII fragment from pGEM-exsFA was ligated into the overexpression vector pQE30 containing a N-terminal six-His tag, itself digested with BamHI and HindIII, to give pQE30-exsFA.
Construction of recombinant strains. Recombinant plasmids were transferred from E. coli to B. anthracis by heterogramic conjugation (40). Allelic exchange was carried out as described by Pézard and collaborators (31).
pXP06 and pXP07 were introduced into strain 7702 to obtain the recombinant strains PF50 (7702
exsFA; Err) and PF51 (7702
exsFA; Spr), respectively. pXP08 was introduced into strains 7702 and PF51 to obtain the recombinant strains PF55 (7702
exsFB; Err) and PF56 (7702
exsFA
exsFB; Spr Err).
The recombinant strains PF60 (7702
exsFA eag::exsFA) and PF65 (7702
exsFB eag::exsFB) were obtained by allelic exchange between eag::exsFA or eag::exsFB in pXP09 or pXP10 and the chromosomal eag locus in PF50 or PF55 strains.
pSP15 was introduced into strain SM17 to obtain the recombinant strain PF08 (7702
sap
eag
bclA).
Electron microscopy. Spores were analyzed after rehydration for 15 min and negative staining as previously described (37).
| RESULTS AND DISCUSSION |
|---|
|
|
|---|
We chose to use the name proposed by Todd and collaborators (39), and the gene was designated exsFA. The B. anthracis genome also contains a paralogue (BA2477) of this gene, from which it is distantly separated on the chromosome by about 1.1 Mb. By analogy, we named this second gene exsFB. The predicted ExsFB protein also contains 168 amino acids and presents 78% (131 of 168 amino acids) identity with ExsFA. The predicted molecular masses of these proteins are about 17 kDa. Most of the differences between these two proteins are in the N-terminal region. exsF genes are also found in the genome of the sequenced B. cereus and B. thuringiensis strains, and the corresponding proteins present between 96 and 100% identity with B. anthracis ExsF proteins. No similarity was found between ExsF proteins and other proteins in databases.
Spore protein profiles of exsF mutants.
exsF knockout mutants were constructed to facilitate investigations of the role of the exsF gene products in spore structure: a single exsFA mutant, a single exsFB mutant, and a mutant lacking both the exsFA and exsFB genes. Protein profiles of spore extracts of the parental and mutant strains were analyzed by SDS-12% PAGE and immunodetection. No difference was observed after Coomassie blue staining (data not shown). Western blotting with polyclonal antibodies raised against the exosporium of a
bclA strain was used to characterize exosporium components other than BclA (Fig. 1A). Several protein bands were recognized in the parental spore extract (Fig. 1A, lane 1). There was also a broad strongly immunoreactive band extending from the insoluble fraction at the top of the gel (stacking gel). This band was also present in the strain in which the exsFA gene had been inactivated. However, several protein bands (15, 16, 17, 35, and 37 kDa) were missing from the immunoblot profile of the
exsFA strain (Fig. 1A, lane 2). The same extracts were also analyzed with polyclonal antibodies raised against a recombinant ExsFA protein (Fig. 1B). Different forms of ExsFA were detected in the parental spore extract: in the insoluble fraction at the top of the gel and in the three protein bands at about 17, 16, and 15 kDa (Fig. 2B, lane 1). As expected, no reactive material was detected in the extract of the
exsFA strain (Fig. 2B, lane 2). The band at about 17 kDa corresponded to the predicted size of the exsFA gene product and ran at the same level as the ExsFA recombinant protein (Fig. 2B, lane 1 and lane 6). The two other bands, at about 15 to 16 kDa, probably corresponded to partial degradation and/or processing products of the ExsFA protein (Fig. 2B, lanes 1 and 2). In contrast, the two components around 35 to 37 kDa, which were recognized with the anti-
bclA exosporium antibodies, were not detected by the anti-ExsFA antibodies (Fig. 2A and B, lanes 1). Therefore, these may be spore components requiring the exsFA gene product for their assembly on the spore. A complementation test was performed by integration of the parental exsFA gene with its promoter region at the chromosomal eag locus encoding the S-layer protein EA1. This insertion restored the parental banding pattern to the complemented
exsFA strain (Fig. 1A and B, lanes 3). Therefore, the loss of ExsFA accounts for the modified protein profile of the
exsFA spore extract. These observations suggest that ExsFA is present in the spore as a monomer (17 kDa) and in higher-molecular-weight forms. In contrast, the strain in which the exsFB gene had been inactivated gave patterns indistinguishable from those of the parental strain patterns (Fig. 1A and B, lanes 4). In the double mutant in which both the exsFA and exsFB genes were disrupted, the patterns were similar to those observed for the
exsFA mutant (Fig. 1A and B, lanes 5). However, the intensity of the high-molecular-mass band detected with the anti-
bclA exosporium antibodies was significantly reduced (Fig. 1A, lane 5). Thus, ExsF proteins may be involved in relatively stable multimeric complexes, possibly including several exosporium components. These observations are consistent with those obtained by Redmond and collaborators (33), using peptide sequence analysis. They found that ExsY, CotY, and ExsF exosporium proteins are present in high-molecular-mass complexes, as well as in monomeric form.
|
|
exsFA spores (Fig. 2A, lane 2) than in wild-type spores (Fig. 2A, lane 1). Its abundance was not affected in the
exsFB mutant spores (Fig. 2A, lane 4), but it was totally absent from the spores of the double mutant
exsFA
exsFB (Fig. 2A, lane 5). These findings were confirmed by immunoblot analysis with anti-BclA monoclonal antibody: BclA was present in the parental and
exsFB strains (Fig. 2B, lanes 1 and 4), less abundant in spore extracts of the
exsFA (Fig. 2B, lane 2), and totally absent from those of
exsFA
exsFB mutants (Fig. 2B, lane 5). In the complemented
exsFA strain, BclA was restored to spore extracts (Fig. 2A and B, lanes 3). These results indicate that inactivation of the exsF genes affects the BclA content of spores.
To investigate whether ExsF proteins are involved in BclA biosynthesis or in the localization of BclA on the spore surface, we followed the synthesis of BclA in the parental
exsFA and
exsFA
exsFB strains during the late stages of sporulation. BclA is produced in the mother cell during sporulation (37). The growth and sporulation curves of the mutant strains were similar to those of the parental strain (data not shown), and culture samples were taken 8 and 20 h (T+8 and T+20) after entry into sporulation (T0). At T+8, >95% of the sporulating cells contained a prespore; at T+20, only mature free spores were present, as determined by microscopic examination of the culture samples. Cell fractions and culture supernatants were tested for the presence of BclA (Fig. 3). At T+8, BclA was detected in the sporulating cells of all strains (Fig. 3, lanes 4, 6, and 8) and was absent from the corresponding supernatants (Fig. 3, lanes 5, 7, and 9). At T+20, BclA in the parental strain was only found associated with the free spores, as expected (Fig. 3, lanes 10 and 11). In the
exsFA culture sample, BclA was found in the supernatant and also associated with the free spores (Fig. 3, lanes 12 and 13). In contrast, BclA was absent from the spore fraction of the mutant
exsFA
exsFB strain and was found exclusively in the culture supernatant (Fig. 3, lanes 14 and 15). Therefore, BclA is produced by the mutants. However, it was partially released into the culture supernatant after mother cell lysis of the
exsFA strain and totally released by the
exsFA
exsFB strain. Thus, ExsFs products seem to be required for the correct localization of BclA to the spore surface.
|
bclA mutants are devoid of filaments (37, 38). The surface of the exsF mutant spores was examined by electron microscopy and compared to that of the parental strain (Fig. 4A). The abundance and the length of filaments on the
exsFB mutant were similar to those on the parental strain (Fig. 4C). In contrast, the spore surface of the
exsFA mutant had considerably fewer exosporium filaments, and their length was similar to that of the parental strain (Fig. 4B); the spore surface of the
exsFA
exsFB double mutant was totally devoid of filaments (Fig. 4D). Complementation of the
exsFA mutation restored filaments to the spore surface (data not shown). These observations were consistent with the SDS-PAGE and immunodetection analyses. Thus, the abundance of filaments on the spore surface was directly related to the amount of BclA protein detected in spore extracts. In addition, electron microscopy analysis of the
exsFA,
exsFB, and
exsFA
exsFB spore preparations showed that inactivation of exsF genes generated instability in the organization of the exosporium basal layer, which contains several crystalline sublayers (2, 12, 16, 43). For all three mutants, this instability resulted in the crystalline sublayers being sloughed off from the spore surface, interestingly revealing the presence of two distinct arrays (Fig. 5). The instability phenomenon, observed with fresh spore preparations, increased with storage time. No such phenomenon was detected with the parental or the complemented
exsFA and
exsFB strains, even after prolonged storage time of the spore stocks. This direct visualization of the sublayers in the
exsF mutants spore preparations may facilitate further investigation of the exosporium sublayer structure.
|
|
| ACKNOWLEDGMENTS |
|---|
This work was supported in part by grant no. 62500 from the CHORI and by grant no. 04-34-025 from DGA.
| FOOTNOTES |
|---|
| REFERENCES |
|---|
|
|
|---|
This article has been cited by other articles:
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Appl. Environ. Microbiol. | Infect. Immun. | Eukaryot. Cell |
|---|---|---|
| Mol. Cell. Biol. | J. Virol. | Microbiol. Mol. Biol. Rev. |
| ALL ASM JOURNALS |