Previous Article | Next Article ![]()
Journal of Bacteriology, February 2005, p. 1324-1333, Vol. 187, No. 4
0021-9193/05/$08.00+0 doi:10.1128/JB.187.4.1324-1333.2005
Copyright © 2005, American Society for Microbiology. All Rights Reserved.
Slade Loutet,1
Arlene D. Vinion-Dubiel,2
Anup Datta,3
Biswa Choudhury,3
Joanna B. Goldberg,2
Russell Carlson,3,4 and
Miguel A. Valvano1*
Department of Microbiology and Immunology, University of Western Ontario, London, Ontario, Canada,1 Department of Microbiology, University of Virginia Health System, Charlottesville, Virginia,2 Department of Biochemistry and Molecular Biology,3 Complex Carbohydrate Research Center, University of Georgia, Athens, Georgia4
Received 9 August 2004/ Accepted 17 November 2004
|
|
|---|
|
|
|---|
Genotyping analyses have demonstrated the existence of clonal lineages of B. cenocepacia transmissible strains that infect multiple CF patients. For instance, the ET12 clone predominates among CF patients in Canada and the United Kingdom (23, 33), and infections with these strains have been associated with high rates of mortality (31, 55). In addition, the PHDC strain has been described as the dominant isolate among infected CF patients in the mid-Atlantic region of the United States (6), while the "Midwest" clone was found in multiple CF patients in Ohio and Michigan (9, 36).
B. cepacia complex isolates are resistant to most clinically useful antimicrobial agents (1, 47). They also overcome the bactericidal effects of components of the innate immune system such as antimicrobial peptides (18), lysozyme, lactoferrin, and phospholipase A2, all of which are secreted by airway epithelial cells (3). In addition, some isolates have the ability to survive intracellularly within macrophages (45, 51), respiratory epithelial cells (4, 34), and amoebae (37, 43). A plethora of potential virulence factors in B. cepacia complex isolates have been described. They include cable pili (52), flagella (57), a type III secretion system (56), surface exopolysaccharide (7), production of melanin (61), catalase (38), up to four types of iron-chelating siderophores (15), proteases and other secreted enzymes (12, 30, 59), quorum sensing systems (27, 40), and the ability to form biofilms (28).
The clinical isolates K56-2, J2315, C5424, and BC7 belong to the ET12 clone, as previously demonstrated by macrorestriction and randomly amplified polymorphic DNA analyses (42). Using a modified signature-tagged mutagenesis technique, we have recently identified over 100 transposon mutants of B. cenocepacia K56-2 that were attenuated for survival in a rat model of chronic lung infection (29). The available genomic sequence of strain J2315 (http://www.sanger.ac.uk/Projects/B_cenocepacia/) was used to annotate the regions in strain K56-2 flanking the transposon insertions in the survival-defective mutants (29). Among the K56-2 survival-defective mutants, four had insertions in genes of an O antigen synthesis cluster. However, when the DNA sequence of the O antigen lipopolysaccharide (LPS) synthesis cluster in strain J2315 was analyzed, we found an IS402 element inserted within a putative glycosyltransferase gene. We hypothesized that this insertion was responsible for the lack of O antigen production by strain J2315 (19). In this study, we demonstrate that strain K56-2 lacks this insertion sequence (IS) element in the O antigen biosynthesis gene cluster and that the cloned glycosyltransferase gene can restore O antigen synthesis in strains J2315, BC7, and C5424. We also show that strain K56-2 produces an O antigen with a structure identical to that of a minor O antigen found in B. cepacia serotype 4 and report for the first time the transcriptional organization of the O antigen synthesis cluster in ET12 strains. Unlike J2315 and some of the K56-2 transposon mutants defective in O antigen synthesis, we also demonstrate that strain K56-2 is resistant to the bactericidal effect of serum complement.
|
|
|---|
[F
80lacZ M15 endA recA hsdR(rKmK) supE thi gyrA relA
(lacZYA-argF)U169]. Bacteria were grown at 37°C in Luria-Bertani (LB) medium supplemented, as required, with 100 µg of trimethoprim (Tp) ml1 and 50 µg of gentamicin (Gm) ml1 for B. cenocepacia and 50 µg of Tp ml1 or 40 µg of kanamycin ml1 for E. coli. Serum sensitivity assay. Bacteria were grown 18 h on LB or Trypticase soy agar with 100 µg of Tp ml1 as required. Cultures were diluted in phosphate-buffered saline (pH 7.0) supplemented with 1% proteose peptone to a final concentration of 107 CFU/ml. Equal volumes of culture and pooled human serum from healthy volunteers (40% final concentration diluted in phosphate-buffered saline with 1% proteose peptone) were mixed and incubated with shaking at 37°C for 2 h. Cultures with no serum and with 40% serum inactivated by incubation at 56°C for 1 h were used as controls. Aliquots were serially diluted, plated on Trypticase soy agar, and incubated at 37°C for 24 to 48 h.
PCR for detection of the presence of an IS element interrupting the wbxE gene. The primers used to amplify the region spanning IS402 in the O antigen biosynthesis gene cluster were P1123 (5'-TCGCGACCTCGAGAATGCCG-3') and P1124 (5'-GTGAAACACCGCAGGCTTGATCG-3'), which annealed to regions immediately flanking the insertion element. PCR amplifications were carried out with Taq polymerase (Roche Diagnostics, Laval, Quebec) and GC resolution buffer (GC-rich PCR system; Roche Diagnostics) in a PTC-0200 DNA engine (MJ Research, Incline Village, Nev.). The conditions for the amplification were 2 min at 95°C, 24 cycles of 95°C for 1 min, 55°C for 35 s, and 72°C for 2 min, and a final extension of 7 min at 72°C. The PCR product was visualized in a 0.7% (wt/vol) agarose gel.
Molecular cloning. The wbxD and wbxE genes were amplified from B. cenocepacia K56-2 chromosomal DNA by PCR using Pwo polymerase (Roche Diagnostics) and Q solution (Taq DNA polymerase; QIAGEN Inc., Valencia, Calif.). The primers used, P1163 (5'-GCTCTAGATACGCTGTCAGCCGTGCC-3') and P1164 (5'-GGAATTCCATATGCCGCGATACCAAAAATTTTTGTTCTTTGC-3'), were made on the basis of the published sequence of B. cenocepacia J2315. The amplification conditions were 4 min at 95°C (the enzyme was added at 2.5 min), 28 cycles of 95°C for 40 s, 65.8°C for 40 s, and 72°C for 3 min, and a final extension of 7 min at 72°C. The resulting 3.3-kb product was digested with NdeI and XbaI and ligated to the vector pSCRhaB3. The construction of this expression vector will be reported elsewhere (S. T. Cardona and M. A. Valvano, unpublished data). Transformants carrying recombinant plasmids with the DNA insert were screened by colony PCR using either primers 816 (5'-CGGCATGGGGTCAGGTGGGACCACC-3') and 824 (5'-GCCCATTTTCCTGTCAGTAACGAGA-3'), which anneal to vector sequences flanking the cloning sites, or primers 824 and 1124. One of these isolated plasmids, designated pXO3, was further examined by digestion with EcoRI to confirm the presence of the DNA insert encoding the wbxE and wbxD genes under the control of the PRHA promoter. The plasmid pXO4, carrying only wbxE, was obtained by digestion of pXO3 with StuI and Asp700 followed by ligation, which resulted in the deletion of the wbxD gene. The plasmid pXO7, carrying only the wbxD gene, was obtained by digestion of pXO3 with NdeI and XhoI followed by treatment with mung bean nuclease and ligation, which resulted in the deletion of the wbxE gene.
Plasmid conjugation into B. cenocepacia.
Plasmids pXO3, pXO4, pXO7, and pSCRhaB3 were conjugated into B. cenocepacia strains J2315, C5424, K56-2, and BC7 by triparental matings (14) using E. coli DH5
(pRK2013) as a helper strain (21). Exconjugants were selected on LB agar plates supplemented with 100 µg of Tp ml1 and 50 µg of Gm ml1. In the case of BC7, selection required 500 µg of Tp ml1 and 50 µg of Gm ml1.
Construction of additional mutations in the O antigen biosynthesis cluster of B. cenocepacia K56-2.
We constructed polar mutations in wecA and wxz genes by a single-crossover recombination strategy. Briefly, an internal fragment of 300 bp from the coding region of each gene was cloned into the suicide plasmid pGp
Tp to provide homology region for recombination. The construction of this vector will be reported elsewhere (R. S. Flannagan and M. A. Valvano, unpublished data). The resulting plasmid was conjugated into strain K56-2 by triparental mating as described above, and exconjugants containing the integrated mutagenic plasmid were selected on LB agar plates supplemented with 100 µg of Tp ml1 and 50 µg of Gm ml1. The presence of the correct insertion was verified by PCR analysis.
Total RNA isolation and RT-PCR analysis. Total RNA was isolated from the B. cenocepacia strain K56-2 by the method described by Glisin et al. (22). Briefly, B. cenocepacia K56-2 was grown in 25 ml of LB medium to an optical density at 600 nm of 0.6. Bacterial cells were collected and resuspended in 3.5 ml of RNase-free TESS buffer (20 mM Tris [pH 7.6], 10 mM EDTA, 100 mM NaCl, 1% sodium dodecyl sulfate-polyacrylamide gel electrophoresis[SDS]) and lysed by heating at 95°C for 3 min. Cesium chloride powder was added to achieve a final concentration of 1 g ml1, and the lysate was deposited on top of a CsCl cushion prepared in SW50.1 tubes (Beckman Coulter, Fullerton, Calif.). The cell lysate was centrifuged at 39,000 rpm for 16 h at 20°C in a SW50.1 rotor, and the RNA was recovered as a clear pellet at the bottom of the tube. The RNA pellet was dissolved in 20 mM sodium acetate and 1 mM EDTA, ethanol precipitated, and kept frozen at 20°C. An aliquot of the precipitated RNA was centrifuged, and the pellet was ethanol washed, dried, resuspended in RNase-free water, and treated with DNase I. The DNase I was eliminated by the cleanup protocol of an RNeasy mini kit (QIAGEN), and this RNA was used for the reverse transcription-PCR (RT-PCR) analysis.
Reverse transcription was performed using a Transcriptor reverse transcriptase kit (Roche Diagnostics) with the primers listed in Table 1. The resulting cDNA was subjected to PCR using Taq DNA polymerase (Roche Diagnostics). The conditions for the amplification were 10 cycles of 2 min at 94°C, 10 s at 94°C, 30 s at 54°C, and 2 min at 72°C followed by 30 cycles of 10 s at 94°C, 30 s at 59°C, and 2 min at 72°C and a final extension of 7 min at 72°C.
|
View this table: [in a new window] |
TABLE 1. Primers used for RT-PCR analysis
|
Small-scale LPS preparation and SDS-polyacrylamide gel electrophoresis analysis. LPS was extracted as described previously (44). Briefly, cells from overnight plate cultures were suspended in a lysis buffer containing proteinase K and incubated for 16 h at 60°C followed by a hot phenol extraction and a subsequent extraction of the aqueous phase with ether. LPS was resolved by electrophoresis in 14% polyacrylamide gels with a Tricine-SDS system (39, 53) and visualized by silver staining (44). For Western blotting, electrophoresed LPS samples were transferred to nitrocellulose membranes. The membranes were incubated with a 1:1,000 dilution of a rabbit polyclonal anti-B. cepacia O4 serum, kindly provided by H. Monteil (26), followed with an anti-rabbit monoclonal antibody conjugated to alkaline phosphatase (Sigma, St. Louis, Mo.) and detection with 5-bromo,4-chloro,3-indolylphosphate-nitroblue tetrazolium substrate for alkaline phosphatase-based detection systems (Sigma).
LPS purification and structural analysis. B. cenocepacia strains K56-2 and J2315 were grown in 1 liter of LB medium at 37°C for 24 h, and LPS was purified by the Darveau-Hancock method as described previously (16). The quality of the purified LPS was confirmed by Tricine-SDS-polyacrylamide gel electrophoresis as described above. To elucidate the chemical structure of the B. cenocepacia O antigen polysaccharides, 20 mg of the purified LPS was hydrolyzed in 2% (vol/vol) acetic acid at 100°C for 2 h. The water-soluble products were fractionated on a BioGel P-2 column (Bio-Rad, Hercules, Calif.), yielding a polymeric material with a broad elution profile. This material was refractionated on a long BioGel P-10 column to reduce core constituents from the O antigen.
The compositions of the LPS and isolated O antigen polysaccharide were determined by the preparation and analysis of trimethylsilyl (TMS) methyl glycosides (60). Briefly, the samples were methanolysed by 1 M methanolic-HCl at 80°C for 18 h followed by re-N-acetylation of methyl glycosides by use of pyridine-acetic anhydride in the presence of methanol at 100°C for 1 h. The free hydroxyl groups of re-N-acetylated methylglycosides were trimethyl sialylated using Tri-Sil reagent (Pierce Biotechnology, Rockford, Ill.) at 80°C for 20 min. The volatile TMS methylglycosides were then analyzed by combined gas chromatography-mass spectrometry (GC-MS) using a DB-1 capillary column (J&W Scientific; Agilent Technologies, Palo Alto, Calif.) (30 m long by 0.25 mm inside diameter by 0.25 µm film thickness), and detection was done with a mass-selective detector (Hewlett-Packard HP 5890 GC interfaced to a 5970 MSD). The fatty acids and hydroxy fatty acids were detected as methyl esters and TMS methyl esters, respectively, by GC-MS using the same column. Glycosyl linkages were determined by the preparation and GC-MS analysis of partially methylated alditol acetates. Methylation analysis was performed as described previously (8).
Nuclear magnetic resonance spectroscopy (NMR) spectra were collected using a Varian Inova600 spectrometer. Data were converted to NMRpipe format and viewed and compared using NMRdraw software. The samples were exchanged several times with D2O (Sigma-Aldrich) (99.8%), and final measurements were made in 0.5 ml of D2O solutions (100% D; Cambridge Isotope Laboratories, Andover, Mass.) at 30°C. Proton NMR spectra were measured at 600 MHz with a spectral width of 8 kHz. The gradient correlated spectroscopy (gCOSY) spectra were measured over a spectral width of 2.5 kHz with a data set (t1 x t2) of 256 x 2,048 points with 16 scans. The total correlated spectroscopy and nuclear Overhauser effect spectroscopy spectra were collected using the same data size with 32 scans and mixing times of 80 and 200 ms, respectively. The gradient-sensitive heteronuclear single-quantum coherence (HSQC) experiment was done with spectral widths of 2.5 and 13.9 kHz in the proton and carbon dimensions, respectively, and 64 scans were acquired. The gradient multiple-bond correlation (HMBC) experiment was performed with 128 scans, and the spectral widths were set at 2.5 and 25.0 kHz in the proton and carbon dimensions, respectively.
DNA sequence. The sequence of the wbxE gene of B. cenocepacia K56-2 was deposited in GenBank under accession number AY633623.
|
|
|---|
![]() View larger version (19K): [in a new window] |
FIG. 1. (A) Genetic organization of a ca. 29-kb region of the ET12 genome in B. cenocepacia strains K56-2 and J2315 containing genes for core-lipid A and O antigen biosynthesis. The flanking genes ureG and apaH are indicated in black. The four genes represented with gray shading encode proteins putatively involved in lipid A-core biosynthesis. waaA, 3-deoxy-D-manno-octulosonic acid transferase; wbxY, conserved hypothetical protein; waaC, heptosyltransferase I; manB, phosphomannomutase; wzx, O antigen exporter; wbxA, glycosyltransferase; wbxB, glycosyltransferase; galE, UDP-glucose epimerase; wecA, UDP-N-acetylglucosamine 1-P transferase; wbiI, nucleotide sugar epimerase-dehydratase; wbiH, UDP-UDP-N-acetylglucosamine 1-P transferase; wbiG, nucleotide sugar epimerase-dehydratase; wbiF, glycosyltransferase; wbxC, acetyltransferase; wbxD, glycosyltransferase; wbxE, glycosyltransferase; vioA, nucleotide sugar aminotransferase; wzt, ATPase; wzm, permease; rmlDCAB, dTDP-rhamnose biosynthesis. The locations of the transposon insertions in the K56-2 mutants 33H3, 32D2, 38C2, and 34D8, as well as the location of the IS402 element in strain J2315, are indicated. The boundaries of the DNA inserts from plasmids pXO3, pXO4, and pXO7 are depicted. (B) Transcriptional organization of the LPS cluster of B. cenocepacia K56-2. Dotted lines with arrowheads indicate the transcriptional regions (regions A through F) deduced from the expected PCR products for the RT-PCR analysis (indicated by numbers 1 to 8). Asterisks indicate that no PCR product was obtained.
|
![]() View larger version (109K): [in a new window] |
FIG. 2. Electrophoretic profiles of LPS extracted from K56-2 mutants 33H3, 32D2, 38C2, and 34D8 in comparison to the profile of the parental K56-2 strain. The loading of the LPS was standardized on the basis of the number of cells used to prepare the samples. Samples were run in 14% polyacrylamide gels in a Tricine-SDS system and developed by silver staining as described in Materials and Methods. Asterisks indicate novel bands probably corresponding to core-lipid A replaced with partial O antigen subunits.
|
![]() View larger version (47K): [in a new window] |
FIG. 3. The serum sensitivity of wild-type K56-2 and mutants 33H3 and 32D2 and mutants J2315 and J2315(pXO4) was determined by incubating bacterial cultures in 40% fresh and heat-inactivated pooled human serum. The percentages of survival were calculated by comparing the growth (measured in CFU per milliliter) of each strain in heat-inactivated serum (100% survival). Bars represent the means of at least three experiments; standard errors are also indicated.
|
![]() View larger version (66K): [in a new window] |
FIG. 4. Association of O antigen production with the absence of an insertion element in the O antigen biosynthesis gene cluster of strain K56-2. (A) LPS electrophoretic profiles for B. cenocepacia ET12 strains. Samples were run in 14% polyacrylamide gels in a Tricine-SDS system and developed by silver staining. (B) PCR amplification experiment to investigate the presence of IS402 interrupting the wbxE gene on B. cenocepacia in ET12 strains. Amplified products were run in a 0.7% agarose gel. M, 1-kb DNA ladder.
|
The plasmid pXO3 was mobilized by triparental mating into strains J2315, BC7, and C5424. Figure 5 shows that these strains formed O antigen in the presence of pXO3 but not in the presence of the pSCRhaB3 vector control. Thus, we conclude from these results that the lack of O antigen production in the ET12 strains J2315, BC7, and C5424 is due to a mutation in the wbxE gene caused by the insertion of the IS402 element. However, the O antigen in the complemented strains displayed a larger amount of high-molecular-weight polymers than the O antigen of the parental strain K56-2. This upshift in the O antigen banding profile was also observed with strain K56-2 conjugated with pXO3, but it was absent from strain K56-2 containing the vector alone. These differences in the O antigen migration patterns could be due to an increased gene dosage of the recombinant wbxD and wbxE genes in the strains that carry pXO3. To determine which gene was involved in this phenomenon we constructed pXO4 and pXO7, both derivatives of pXO3 lacking wbxD and wbxE, respectively. Figure 6 shows that pXO4 also complemented O antigen expression in strain J2315, but in this case the migration profile of the O antigen bands was identical to the profile of the parental K56-2 strain. Similar results were obtained with pXO4 in strain C5424 (data not shown). pXO7 did not complement the O antigen expression in J2315 or affect the migration profile of the O antigen bands in strain K56-2 (Fig. 6). Taken together, these results demonstrate that the IS402 in wbxE is nonpolar with respect to the expression of wbxD and also suggest that the bands of higher polymerization found in the strains carrying the pXO3 plasmid are due to an unbalanced stoichiometry of both wbxD and wbxE.
![]() View larger version (104K): [in a new window] |
FIG. 5. LPS electrophoretic profiles for B. cenocepacia ET12 strains in the presence of the complementing plasmid pXO3 or vector control pSCRhaB3.
|
![]() View larger version (116K): [in a new window] |
FIG. 6. LPS electrophoretic profiles for B. cenocepacia ET12 strains K56-2 and J2315 in the presence of the vector control pSCRhaB3 and complementing plasmids pXO3, pXO4, and pXO7.
|
The transcriptional organization of the O antigen biosynthesis gene cluster in strain K56-2 was experimentally determined by nested RT-PCR amplifications. We prepared cDNA from RNA isolated from B. cenocepacia K56-2 and amplified it by PCR using primer pairs that would allow detection of cotranscription (Fig. 1B). We particularly investigated the regions where the open reading frames have more than 20 bp of noncoding intergenic regions. Lack of amplification of the expected fragment in regions 1, 5, and 6 (Fig. 1B) indicated the absence of cotranscription and suggested that the contiguous genes in these regions are part of distinct transcriptional units. By contrast, cotranscription was detected in regions 2, 3, 4, 7, and 8 (Fig. 1B). Region 8 spans a 67-bp intergenic region between rmlD and wzm. This intergenic sequence has the potential to form a stem-loop structure (data not shown), which may play a regulatory role in gene expression. Alternatively, this region may contain a weak promoter that the RT-PCR cannot detect since there may be readthrough from the upstream transcript. Additional bands were observed in some of the PCRs, which may have been due to nonspecific annealing due to the high G+C content of some of the primers. These experiments suggest that there is a large transcriptional unit that spans rmlBACD-wzm-wzt-vioA-wbxFED (Fig. 1B, region A). The gene wbxC is singly transcribed in the opposite direction (Fig. 1B, region B), while the genes wbiFGHI form another transcriptional unit (Fig. 1B, region C). The remaining genes of the cluster are organized in three additional transcriptional units. They include the genes wzx-wbxAB-galE-wecA, manB-waaC-wbxY, and waaA, corresponding to regions D, E, and F, respectively, in Fig. 1B. The analysis of the predicted homologies of the gene products permitted us to establish functional assignments for the majority of the polypeptides (Fig. 1 legend; also see Table S1 in the supplemental material).
The presence of wzm and wzt genes, which encode a predicted two-component ABC transporter, suggests that the O antigen produced by ET12 strains is exported across the plasma membrane by the ABC transport pathway. In this pathway, the O antigen subunit is polymerized in the cytosol and exported across the membrane by a two-component ABC transporter (for a review, see reference 48). This conclusion is consistent with the absence of a wzy gene encoding a polymerase and is also consistent with the presence of wbxF encoding a large protein with two glycosyltransferase domains. These large glycosyltransferases are usually present in strains producing O antigens that are exported by the ABC pathway and are generally involved in the extension of the O antigen (48). In addition, the wbiH gene encodes a predicted transmembrane protein with the features of members of the WecA family. These proteins are involved in the transfer of N-acetylhexosamines to an undecaprenol-phosphate intermediate to initiate the assembly of the O antigen subunits (58). The WbiH polypeptide has strong similarities with gene products from the B. mallei and B. pseudomallei exopolysaccharide clusters (5, 17) and also with WbpL from Pseudomonas aeruginosa (49). Remarkably, there is also a WecA homolog in the transcriptional region D that is closely related to UDP-N-acetylglucosamine 1-phosphate transferases. In addition, this region contains a gene whose predicted product is similar to proteins of the Wzx family, which are involved in the translocation of the O antigen subunit across the plasma membrane prior to their polymerization by the Wzy polymerase. We investigated the role of wecA and wzx genes in the biosynthesis and assembly of the O polysaccharide in strain K56-2 by constructing derivative strains with polar mutations in both genes. O antigen synthesis was not affected in the mutants (data not shown), suggesting that the O antigen in K56-2 is produced by an ABC transport pathway.
The genes present in the transcriptional units E and F (Fig. 1) are likely involved in the formation of part of the inner-core oligosaccharide. This is particularly the case for waaA and waaC; the gene products of both have strong amino acid sequence identity with 3-deoxy-D-manno-octulosonic acid and heptose transferases, respectively. The role of manB in relation with core synthesis cannot be assessed until the structure of the core is completely determined, but it is likely that this gene encodes a function also required for core oligosaccharide assembly. The gene wbxY is the only gene of this region that encodes a protein conserved in other bacteria but without a known function. It is likely that the product of wbxY is involved in lipid A-core biosynthesis or modification, as the gene order manB-waaC-wbxY-waaA is conserved in other Burkholderia species whose genomes are presently being sequenced (http://genome.jgi-psf.org/microbial/).
The O antigen in B. cenocepacia ET12 strains is made of a trisaccharide repeating unit. To understand the functions of the gene products encoded by the O antigen biosynthesis gene cluster in ET12 strains we elucidated the chemical structure of the O antigenic polysaccharide repeat produced by strain K56-2. The compositions of the LPS of strains K56-2 and J2315 were determined, and the GC-MS profiles are shown in Fig. 7. The LPS from strain K56-2 contains rhamnose (Rha) and N-acetylgalactosamine (GalNAc) that are not observed in the LPS from strain J2315, indicating that these glycosyl residues are part of the O antigen polysaccharide that is present in strain K56-2 and is not present in the O antigen-defective strain J2315 (Fig. 7). The LPS from J2315 does contain a small amount of Rha and galactose (Gal), which are likely part of the core oligosaccharide region, as has been previously reported for B. cepacia (32). Alternatively, since IS402 is inserted in a predicted glycosyltransferase gene it is also possible that the Rha and Gal in the J2315 core correspond to an incomplete O unit added to core-lipid A. This is consistent with the higher molecular mass of the lipid A-core band in J2315 (Fig. 4A).
![]() View larger version (25K): [in a new window] |
FIG. 7. The GC-MS profiles of the glycosyl residues present in strain K56-2 (top panel) and strain J2315 (bottom panel). The various TMS methyl glycoside peaks are as labeled. Inositol was added to each sample as an internal control. The y axis denotes ion intensity.
|
|
View this table: [in a new window] |
TABLE 2. The glycosyl linkages of the O-chain polysaccharide isolated from B. cenocepacia strain K56-2
|
The 1H NMR spectrum (Fig. 8) of the K56-2 O-specific polysaccharide revealed the presence of three anomeric signals at 5.09, 4.86, and 4.80 ppm, together with N-acetyl methyl singlets at 2.02 and 2.07 ppm and a C6 Rha methyl doublet at 1.35 ppm. These results are consistent with the presence in the O unit of two residues of GalNAc and one residue of Rha, respectively, and with data obtained from methylation analysis indicating that the polysaccharide consists of a Rha1GalNAc2 trisaccharide repeating unit. This conclusion was also supported by the 1H-13C correlations obtained from the HSQC spectrum (data not shown), which contained three signals in the anomeric regions at 103.0/4.86, 94.24/5.09, and 102.4/4.81 ppm together with signals from N-acetyl methyl groups at 22.7/2.07 and 22.7/2.02 ppm and a C6 Rha methyl signal at 17.4/1.35 ppm. The proton and carbon NMR assignments of the three glycosyl residues present in the repeating unit were made through COSY and total correlated spectroscopy analyses (data not shown), together with the HSQC spectral spectra described above. The results are given in Table 3. The chemical shifts of H-4 and C-4 of the Rha residue and H-3 and C-3 of the GalNAc residues were downfield, in agreement with the methylation data which showed that Rha was substituted at O-4 and GalNAc was substituted at O-3. With these assignments the sequence of the glycosyl residues was determined using HMBC and nuclear Overhauser effect spectroscopy analyses (data not shown). The HMBC spectrum shows a correlation between H-1 (4.86 ppm) of
-L-Rhap and C-3 (71.1 ppm) of
-D-GalpNAc, H-1 (5.09 ppm) and C-3 of ß-D-GalpNAc (75.2 ppm), and H-1 of ß-D-GalpNAc (4.81 ppm) and C-4 of
-L-Rhap (80.8). The NOESY spectrum confirmed these same interglycosyl correlations between the residues (data not shown). Therefore, we concluded that the sequence of the O antigen repeat is as follows:
4)-
-L-Rhap-(1
3)-
-D-GalpNAc-(1
3)-ß-D-GalpNAc-(1
). This structure has been previously reported as a minor O polysaccharide in B. cepacia serotype O4 (13). A Western blot experiment with O4-specific polyclonal rabbit antiserum confirmed a positive reaction with purified K56-2 LPS (data not shown).
![]() View larger version (22K): [in a new window] |
FIG. 8. The proton spectrum of the O-chain polysaccharide isolated from strain K56-2. The anomeric, N-acetyl methyl, and Rha methyl protons are indicated. The remaining glycosyl residue ring protons resonate between 3.5 and 4.7 ppm. A complete proton assignment was determined as described in the text and as given in Table 3.
|
|
View this table: [in a new window] |
TABLE 3. The proton and carbon NMR assignments of the O-chain polysaccharide isolated from B. cenocepacia strain K56-2
|
To our knowledge this is the first report on the organization of the O antigen LPS cluster in B. cenocepacia. The O antigen-defective strain J2315 is considered to be one of the first isolates obtained that belongs to this clone. However, due to the chronic nature of B. cenocepacia infections in CF patients, it is not possible to ascertain whether the strain lost its O antigen prior to or after colonization in the airways. An analogous situation has been documented for infections of CF patients with P. aeruginosa, where the pathogen exhibits large chromosomal inversions and adapts to a complex phenotype that among other features includes O antigen deficiency (35). Therefore, as it is possible that O antigen expression in B. cenocepacia isolates, as in the case of P. aeruginosa, may only be needed for the initial stages after the establishment of the infection. The role of O antigen in the initial steps of colonization is presently being studied in our laboratories.
Tp, respectively, C. Bhatt for technical assistance, and E. Vinés and R. Flannagan for useful discussions and technical advice. This work was supported by the Special Program Grant Initiative "In Memory of Michael O'Reilly" funded by the Canadian Cystic Fibrosis Foundation and the Cardiovascular and Respiratory Health Institute of the Canadian Institutes of Health Research (M.A.V.), grant MOP64356from the Canadian Institutes of Health Research (M.A.V.), grant AI050230 from the National Institutes of Health (J.B.G.), grant GOLDBE03P0 from the Cystic Fibrosis Foundation (J.B.G.), and a grant from the U.S. Department of Energy (DE-FG02-93ER20097) to the Complex Carbohydrate Research Center. T.A.H. and S.L. were recipients of a Graduate Studentship Award from the Canadian Cystic Fibrosis Foundation and a Postgraduate Award (PGSA) from the Natural Sciences and Engineering Research Council of Canada, respectively. A.D.V-D. was supported by the National Institutes of Health through a University of Virginia Infectious Diseases Training grant (AI07046). M.A.V. holds a Canada Research Chair in Infectious Diseases and Microbial Pathogenesis.
Supplemental material for this article may be found at http://jb.asm.org/. ![]()
Present address: Department of Cell Biology, University of Alberta, Edmonton, Alberta, T6G 2H7, Canada. ![]()
|
|
|---|
-D-talo-oct-2-ulosylonate-(2
4)-3-deoxy-D-manno-oct-2-ulo sonate [
-Ko-(2
4)-Kdo] disaccharide in the lipopolysaccharide from Burkholderia cepacia. Carbohydr. Res. 338:2659-2666.[CrossRef][Medline]
This article has been cited by other articles:
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Copyright © 2009 by the American Society for Microbiology. For an alternate route to Journals.ASM.org, visit: http://intl-journals.asm.org | More Info»