Previous Article | Next Article ![]()
Journal of Bacteriology, June 2006, p. 4183-4189, Vol. 188, No. 12
0021-9193/06/$08.00+0 doi:10.1128/JB.00197-06
Copyright © 2006, American Society for Microbiology. All Rights Reserved.
Mark C. Sulavik,2,
Todd A. Black,2 and
Eric D. Brown1*
Antimicrobial Research Centre and Department of Biochemistry and Biomedical Sciences, McMaster University, Hamilton, Ontario L8N 3Z5, Canada,1 Schering-Plough Research Institute, Kenilworth, New Jersey 07033-05302
Received 6 February 2006/ Accepted 31 March 2006
|
|
|---|
|
|
|---|
An analysis of the gene clusters for the synthesis of teichoic acid in B. subtilis strains 168 and W23, along with the benefit of many years of physiological, genetic, biochemical, and analytical work on wall teichoic acids, some in S. aureus, provided a rational basis for proposing functional roles for most of the gene products (7, 27, 28, 34). The major wall teichoic acids of the model gram-positive B. subtilis strains 168 and W23 are linear 1,3- and 1,5-linked poly(glycerol phosphate) and poly(ribitol phosphate), respectively. The poly(ribitol phosphate) polymer of B. subtilis W23 is also common to S. aureus. Figure 1 summarizes our understanding with a model for the biogenesis of poly(ribitol phosphate) wall teichoic acid in S. aureus. Teichoic acid biosynthesis begins with the formation of an undecaprenyl-pyrophosphoryl disaccharide on the cytoplasmic face of the cell membrane through the successive action of proteins TarO (N-acetylglucosamine-1-phosphate transferase) and TarA (N-acetylmannosamine transferase). Subsequently a primase (TarB) and oligomerase (TarF) are believed to add a trimer of 1,3-linked glycerol-3-phosphate units to the 4-hydroxyl of N-acetylmannosamine. Glycerol-3-phosphate is provided by the action of TarD in an activated form, CDP-glycerol. Analogously, TarK and TarL have been proposed to prime and polymerize, respectively, a 1,5-linked polymer (
30 units) of ribitol-5-phosphate on the terminal hydroxyl of the trimer of glycerol phosphate. TarIJ provides activated ribitol-5-phosphate in the form of CDP-ribitol. Intracellular synthesis of the complete polymer is thought to be followed by extrusion by TarGH, an ABC transporter, before transfer to the 6-hydroxyl of N-acetylmuramic acid moiety of peptidoglycan by an unknown transferase.
![]() View larger version (17K): [in a new window] |
FIG. 1. Proposed scheme for teichoic acid synthesis in S. aureus. (A) The chemical structure for the completed polymer covalently bound to N-acetylmuramic acid is depicted. The repeating ribitol-5-phosphate polymer is often replaced by D-alanine or glucose (R2 and R3). (B) S. aureus teichoic acid comprises a polymer composed of a disaccharide containing N-acetylglucosamine-1-phosphate (filled oval) and N-acetylmannosamine (open oval), 3 units of glycerol-3-phosphate (square), and 30 repeating ribitol-5-phosphate (octagon) units. These polymers are synthesized in a stepwise manner on the cytoplasmic face of the cell membrane onto undecaprenyl-phosphate (wavy line). Following synthesis, the entire polymer is exported out of the cell and attached to N-acetylmuramic acid of peptidoglycan.
|
Here, we report a comprehensive investigation of the dispensability of teichoic acid biosynthetic genes in S. aureus using a novel allelic replacement methodology. Our findings challenge the emerging doctrine of teichoic acid essentiality in gram-positive bacteria. We have confirmed that the gene encoding the first step of the pathway, tarO, is readily dispensable in S. aureus and that its deletion results in a strain lacking wall teichoic acid. Surprisingly, genes coding for subsequent biosynthetic steps in the pathway, tarB, tarD, tarF, tarIJ and tarH, resisted deletion and thus show an essential phenotype. This paradox of apparent indispensability of late-acting genes in an otherwise nonessential pathway was resolved with a systematic construction of double mutants. All of the late-acting genes became dispensable in a strain of S. aureus that lacked tarO. These surprising findings point to a mechanism for indispensability in late-acting teichoic acid biosynthetic genes, where a lethal gain of function results from a lesion in late-acting steps of the teichoic acid biogenesis pathway. The work has broad implications for our understanding of essential gene sets, gleaned through single-gene dispensability studies, of bacteria and higher organisms. These findings likewise point to a novel and exploitable drug development strategy targeting later steps in teichoic synthesis in S. aureus, an infectious pathogen of menacing renown in the clinic and in the community (14, 32).
|
|
|---|
(Promega) or Novablue (Novagen) strains grown in Luria-Bertani broth at 37°C. All S. aureus strains, described in Table 1, were grown in Mueller-Hinton broth (MHB) at 37°C. For selection in E. coli, ampicillin (50 µg/ml) and kanamycin (50 µg/ml) were used. In S. aureus, kanamycin (Kan; 20 µg/ml), erythromycin (Erm; 10 µg/ml), spectinomycin (Spec; 300 µg/ml), chloramphenicol (Chl; 60 µg/ml), sucrose (5%, wt/vol), and IPTG (isopropyl-ß-D-thiogalactopyranoside; 0.4 mM) were used. |
View this table: [in a new window] |
TABLE 1. S. aureus strains and plasmids used in this study
|
Chromosomal manipulation of S. aureus.
DNA manipulations were performed using both transformation and transduction. Transformation was accomplished through standard electroporation procedures (25). Transductions were performed using bacteriophage 80
and standard protocols (29).
Generation of S. aureus SA178RI.
The S. aureus expression strain SA178RI was constructed via integrative transformation into the strain CYL316, a derivative of RN4220. The T7 polymerase gene from
DE3 was placed under the control of the gram-positive promoter Pspac and cloned upstream of the lacI repressor driven by the constitutive promoter Ppen to generate the expression cassette. Two lac operator sequences were introduced into the Pspac promoter upstream of the ribosome binding site as well as a trpA terminator upstream of the promoter region. The trpA term-Pspac/T7-Ppen/lacI cassette was cloned into the integration vector pCL84 and electroporated into CYL316. Tetracycline-resistant and lipase-negative colonies were the result of successful integration of the cassette into the geh locus.
Construction of pSAKO, an S. aureus gene deletion plasmid. pSAKO is an S. aureus suicide vector utilized to disrupt chromosomal copies of S. aureus genes. pSAKO has a gram-negative p15A origin of replication subcloned from pACYC184, making it nonreplicative in S. aureus. It has a multiple cloning site (MCS) and a trpA transcriptional terminator cloned from pQF50. It also has the gene encoding the bifunctional enzyme AAC(6')-APH(2"), conferring aminoglycoside resistance for selection in both E. coli and S. aureus, which was cloned as a PCR product from S. aureus genomic DNA (16). pSAKO also has a copy of the mutated levansucrase gene, sacB[BamP]W29 (8), which confers sucrose-induced lethality in S. aureus, allowing for counterselection.
Construction of pG164, an S. aureus complementation vector. pG164 is an E. coli and S. aureus shuttle vector constructed by fusing pUC19 and pSK265. The vector has both a pUC and a pC194 origin for replication in gram-negative and -positive bacteria, respectively. The expression cassette in pG164 is comprised of a T7 promoter into which a lac operator has been introduced to enhance regulation in the absence of inducer, as well as a gram-positive optimal ribosome binding site, an MCS, and a C-terminal six-histidine tag. pG164 also has a copy of the lacI repressor regulated by the constitutive promoter Ppen to reduce background expression in the absence of induction.
Creation of gene-specific deletion plasmids. Primer sequences are found in Table S1 in the supplemental material. All PCRs were performed using Vent DNA polymerase (New England Biolabs) or a Roche High-Fidelity PCR System. The spectinomycin and erythromycin cassettes were PCR amplified using SpecF-SpecR and ErmF-ErmR, respectively. For each gene, the left and right flanks were independently amplified from the SA178RI chromosome using gene-specific primers sets A-B and C-D, respectively. Primers B and C contain regions complementary to the resistance cassette to allow binding. A final PCR using gene-specific primers A-D was performed using the resistance cassette and both left and right flanks as a template. The resulting product was purified and ligated into the XhoI site of pSAKO.
Creation of integrants in tarO, tarB, tarD, tarF, tarIJ, and tarH. SA178RI was independently transformed with gene-specific pSAKO integration plasmids (Table 1). Integrants were selected on MH agar (MHA) supplemented with kanamycin and spectinomycin or erythromycin. Strains generated were confirmed by PCR.
Testing for gene essentiality.
Integrants (EBII1, EBII2, EBII3, EBII4, EBII29, and EBII43) were plated on MHA containing sucrose. A total of 100 colonies from each strain were selected and passaged twice more onto MHA with sucrose. Each colony was then patched onto MHA containing kanamycin, MHA containing erythromycin or spectinomycin, and MHA alone to determine phenotype. For strains in which mutants could not be generated, the same procedure was performed on complemented integrants (EBII9, EBII10, EBII15, EBII27, and EBII50). In addition to the above antibiotics, this medium was supplemented with chloramphenicol and IPTG. Finally, the dispensability of tarB, tarD, tarF, tarIJ, and tarH in a
tarO background was determined using integrants EBII35, EBII36, EBII37, EBII46, and EBII38 as described above. The growth medium contained spectinomycin through all steps in the procedure. The phenotype of each colony was determined, and the data are summarized in Table 2.
|
View this table: [in a new window] |
TABLE 2. Allelic replacement for testing gene dispensability
|
tarO and
tarO pG164-tarO.
EBII29 was passaged three times on MHA containing sucrose and spectinomycin to generate a tarO deletion (EBII44). EBII44 was transformed with pG164-tarO to generate a complemented
tarO strain (EBII53).
Creation of tarB, tarD, tarF, tarIJ, and tarH integrants in a
tarO background.
For the generation of the tarIJ integrant in the
tarO background, pSAKO-
tarIJ was transformed into EBII44 and selected for on MHA containing erythromycin and kanamycin to generate EBII46. For all other clones, EBII53 was used to generate bacteriophage 80
lysate. This lysate was used to transduce each integrant (EBII1, EBII2, EBII3, EBII4, and EBII29) and selected on MHA containing spectinomycin and kanamycin. This allowed the movement of the tarO deletion, marked with spectinomycin, into each single integrant.
Creation of double-gene deletions. Strains EBII35, EBII36, EBII37, EBII38, and EBII46 were plated for three successive rounds on MHA containing spectinomycin, erythromycin, and sucrose to generate double mutants.
PCR verification of single integrant and deletion strains. All single integrant and deletion strains were verified by PCR analysis (data not shown). For deletion strains, analysis was performed using a drug cassette-specific primer and primers designed to anneal to sequences of the flanking regions. For single integrant strains, analysis was performed using a drug cassette-specific primer and primers designed to anneal either to the flanking regions or to sequences in pSAKO. In all cases, PCR analysis was performed for both the upstream and downstream sequences flanking the insertion.
Cell wall phosphate content determination. Strains were grown overnight in 5 ml of MHB and used to inoculate 100 ml of fresh MHB and grown at 37°C overnight to saturation. Cell wall isolation and phosphate content determination were carried out as described previously (6). Briefly, cell wall was extracted by boiling in sodium dodecyl sulfate (26), DNase, and RNase and trypsin treated (22) and mineralized (2). Wall phosphate content was assayed by absorbance using KH2PO4 as a standard (12).
|
|
|---|
1,000 bp) surrounding the gene targeted for deletion are cloned into the polylinker of pSAKO along with an intervening drug marker (Erm). Transformation and selection result in single recombinants containing a tandem duplication of the targeted locus consisting of wild-type and mutant copies. Subsequent plating on sucrose selects for loss of the plasmid sequences through two possible excision events. If the gene is dispensable, both mutant (Erm resistant and Kan sensitive) and wild-type (Erm sensitive and Kan sensitive) clones will be generated. In the case of an essential gene, only the wild-type allele will be isolated among the resulting clones. The strength of this methodology is in a passive approach to the isolation of excisants and subsequent evaluation of resistance profiles of the resulting clones to reveal frequencies at which the organism can dispense with the targeted gene.
![]() View larger version (17K): [in a new window] |
FIG. 2. A novel genetic strategy for testing dispensability in S. aureus. (A) pSAKO contains a gram-negative p15A replication origin that allows replication in E. coli but not in S. aureus. Selection in both E. coli and S. aureus is accomplished using the kanamycin resistance cassette, AAC(2')-APH(6"), while a mutant form of SacB (sacB[BamP]W29) permits counterselection. Unique restriction sites found within the MCS are highlighted on the outside of the plasmid. (B) Integration of pSAKO encoding kanamycin resistance and containing an erythromycin resistance cassette, the latter flanked by 1,000 bp of chromosomal sequences upstream and downstream of the targeted gene (tarX), occurs through single recombination. Selection for excision of the plasmid sequence is accomplished using sacB[BamP]W29 (sacB) (8) on medium containing sucrose. Excision results in restoration of the wild-type (WT) locus or generation of a mutant locus. (C) The expression cassette located on pG164 was used to express the complementing copy of the gene of interest (tarX) cloned into the MCS. Protein expression was driven by a T7 promoter controlled by a chromosomally integrated T7 polymerase induced by IPTG.
|
![]() View larger version (88K): [in a new window] |
FIG. 3. Dispensability analysis of S. aureus tarD. Integrants targeting tarD (EBII3 and EBII15) were subjected to selection for excisants on MHA containing sucrose (EBII3) (A) and MHA containing chloramphenicol, IPTG, and sucrose (EBII15) (B). The phenotypic outcome of selection was revealed in the resistance profile of three test plates containing (i) kanamycin, (ii) erythromycin, and (iii) no antibiotic.
|
The requirement for TarO cannot be bypassed.
One explanation for this paradox is that cells may be making teichoic acid in the absence of tarO, perhaps through the use of a redundant enzyme to transfer N-acetylglucosamine-1-phosphate to undecaprenyl-phosphate or by remodeling the teichoic acid polymer to exclude the need for the N-acetylglucosamine-1-phosphate moiety. This would be consistent with the conventional understanding in B. subtilis that teichoic acid polymers are an essential component of the cell wall in S. aureus. To address this we endeavored to test the dispensability of the late-acting genes (tarB, tarD, tarF, tarIJ, and tarH) in the
tarO genetic background. Again, 100 integrants targeting the late-acting genes in the
tarO strain were characterized following counterselection (Table 2). In all cases, excision generated both wild-type and mutant alleles with approximately equal propensity. Thus, the late-acting genes (tarB, tarD, tarF, tarIJ, and tarH) became nonessential in the absence of tarO, a finding inconsistent with the possibility that TarO function could be bypassed in any fashion. Indeed, we confirmed that the cell wall phosphate content was vastly reduced in the
tarO mutant relative to the parent strain (0.0069 ± 0.0003 and 0.48 ± 0.05 µmol phosphate/mg of cell wall, respectively) and that provision of plasmid-encoded tarO in trans could correct the defect in this mutant (0.37 ± 0.02 µmol phosphate/mg of cell wall). Accordingly, our characterization of the teichoic acid content of the tarO mutant was in accord with the previous study indicating that the viable tarO deletion mutant lacked teichoic acid (38).
|
|
|---|
Our observations regarding suppression of lethality within the teichoic acid biosynthetic pathway suggest a mechanism where a single mutation in late-acting steps leads to a lethal gain of function for the abbreviated pathway. The most parsimonious interpretation of our findings is that once teichoic acid production has commenced, it must be completed or else lethal intermediates accumulate. For example, the incomplete production of teichoic acid might cause an accumulation of toxic precursors, such as activated sugars or partially complete polymer, leading to cell death. Alternatively, a lesion in teichoic acid synthesis may interfere with the synthesis of some truly essential component of the cell, for example, by sequestering a shared building block. Apart from UDP-N-acetylglucosamine and undecaprenyl-phosphate, which are shared with peptidoglycan biosynthesis, teichoic acid synthesis uses building blocks that are exclusive to its own synthesis. Interestingly, work using isolated B. subtilis membranes demonstrated that inhibition of peptidoglycan synthesis could occur by providing a soluble teichoic acid precursor, CDP-glycerol (3), suggesting a functional link between the assembly of these two major cell wall components. Along these lines, a failure to complete teichoic acid production could conceivably sequester the otherwise recycled undecaprenyl-phosphate molecule (36) upon which peptidoglycan is also built (19). Such a mechanism for lethality could surely be corrected by preventing the initiation of teichoic acid production with the loss of tarO. This explanation is further supported circumstantially by the phenotypes of conditional mutants in these metabolic pathways. Lesions in teichoic acid synthesis (5), peptidoglycan biogenesis (37), and isoprenoid biosynthesis (11), the latter pathway being responsible for undecaprenol production, all result in remarkably similar and profoundly altered cell morphology, as shown by electron microscopy examination.
The essential phenotypes of the five late-acting loci studied in this work (tarB, tarD, tarF, tarIJ, and tarH) suggest that all late-acting genes, at least from tarB onward, will be essential. The prediction, therefore, is that four additional genes (tarK, tarL, tarG, and the unknown transferase), and possibly tarA, will show an essential phenotype in S. aureus. The possibility of 10 apparently indispensable genes coding for the 11-step synthesis of a nonessential polymer in S. aureus challenges the conventional understanding of essential gene sets garnered through single-gene deletion experiments, at least in the laboratory setting.
The discovery of a lethal gain of function associated with lesions in the late steps of teichoic acid biosynthetic genes points to a novel therapeutic route to target the pathogen S. aureus. S. aureus is a major cause of hospital-acquired infection and has become increasingly difficult to treat due to resistance to multiple antibiotics including methicillin (33) and vancomycin (39). The work outlined here suggests that inhibition of late-acting enzymes in teichoic acid biosynthesis leads to cell death, possibly through a corrupting impact on cell wall peptidoglycan biosynthesis. Indeed, while a mutation of the first-acting gene, tarO, would be capable of suppressing the lethal inhibition of late-acting steps, Weidenmaier et al. have shown wall teichoic acid in S. aureus to be a key virulence determinant for infection (38). Thus, wall teichoic acid biosynthesis appears to be critical for growth in vivo and represents a pathway that is vulnerable to an extraordinary mechanism for lethality upon inhibition.
. This work was supported, in part, by a Canadian Institutes of Health Research operating grant (MOP-15496). M.A.D. and M.P.P. were funded by the Ontario Ministry of Training, Colleges, and Universities. E.D.B. holds a Canada Research Chair in Microbial Biochemistry.
Supplemental material for this article may be found at http://jb.asm.org/. ![]()
Present address: Department of Biology, Bowdoin College, Brunswick, ME 04011. ![]()
Present address: Pfizer Global Research and Development, Ann Arbor, MI 48105. ![]()
|
|
|---|
This article has been cited by other articles:
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Copyright © 2009 by the American Society for Microbiology. For an alternate route to Journals.ASM.org, visit: http://intl-journals.asm.org | More Info»