Previous Article | Next Article ![]()
Journal of Bacteriology, July 2006, p. 4610-4619, Vol. 188, No. 13
0021-9193/06/$08.00+0 doi:10.1128/JB.00287-06
Copyright © 2006, American Society for Microbiology. All Rights Reserved.
Institut für Mikrobiologie, Ernst-Moritz-Arndt-Universität, D-17487 Greifswald,1 Fachbereich Chemie/Biochemie, Philipps Universität, D-35032 Marburg, Germany2
Received 24 February 2006/ Accepted 12 April 2006
|
|
|---|
|
|
|---|
The Bacillus subtilis ClpP protease was shown to act centrally in global protein quality control (21). A clpP mutant shows a pleiotropic phenotype revealing the involvement of ClpP in development of competence, motility, thermotolerance, degradative enzyme synthesis, and sporulation (11, 21, 27). The ClpC ATPase is the interacting partner of ClpP in many physiologically important processes such as competence gene expression or adaptation to diverse stress parameters (9, 23). Several ClpCP substrates were described previously (22, 25, 31, 39), and ClpCP-dependent degradation was shown to be mediated by adapter proteins (8, 35). Furthermore, B. subtilis ClpXP controls competence development as well as the degradation of SsrA-tagged polypeptides (29, 42).
So far, a physiological function for the B. subtilis ClpE ATPase has not been described. ClpE was originally visualized on two-dimensional gels in 1987 and was described as unknown heat shock protein HSP1 (14). The clpE gene was discovered and annotated as a member of a novel HSP100-type ATPase subfamily and was characterized as part of the heat-inducible CtsR regulon (7). The ClpE ATPase can be assigned to the class I of the AAA+ superfamily (34).
ClpE homologues were found in several gram-positive bacteria. In Listeria monocytogenes, ClpE is required for prolonged survival at elevated temperature, virulence, and regulation of cell septation (28). ClpE of Streptococcus pneumoniae seems to be the major thermotolerance Clp ATPase and is also partly involved in virulence (5). A detailed study of Lactococcus lactis ClpE revealed specific effects on CtsR-dependent clpP expression at elevated temperature and demonstrated the essentiality of the N-terminal zinc finger domain for proper ClpE function in vivo (40). In B. subtilis, the genes coding for ClpC, ClpE, and ClpP are members of the CtsR (class three stress gene repressor) regulon (6). Regulation of CtsR activity is controlled by a fine-tuned phosphorylation mechanism including the modulators McsB and McsA and has been studied in detail (20, 25). Among the CtsR-regulated genes, clpE is most tightly repressed (7). ClpE was found to be a very short-lived protein, that is, at least in the cytoplasmic cell fraction, degraded mainly by ClpCP (12). Although the interaction of ClpE and ClpP could be proven by coimmunoprecipitation (12), substrates of ClpEP degradation have so far not been described.
This study presents first insights into the physiological role of ClpE in B. subtilis. The presence of ClpE in the cells after heat shock is shown to be important for the destabilization of CtsR and disaggregation of heat-denatured proteins. In this context, a clpE mutant displays a retardation of CtsR-dependent gene induction as well as a delayed restoration of the repressed stage. In summary, the results indicate a ClpEP-dependent pathway of CtsR degradation and the involvement of ClpEP in overall protein quality control in response to heat stress.
|
|
|---|
|
View this table: [in a new window] |
TABLE 1. Bacterial strains and plasmids
|
Construction of a clpE deletion mutant.
A clpE deletion mutant was constructed following the PCR-synthesis method using marker cassettes with long flanking homology regions (41). Regions upstream and downstream of the B. subtilis clpE gene were amplified with the following primer pairs: CLPE_UP_FOR (5'-AAACCGAACCAGCCGAACTTCAG-3') and CLPE_UP_REV (5'-CTCTTGCCAGTCACGTTACGTTATTAGGGCAAACTTAACGGCATTCAAACC-3') and CLPE_DOWN_FOR (5'-GCATAGTTAAGCCAGCCCCGAACCATCCAAGAATGGGTT GAGG-3') and CLPE_DOWN_REV (5'-GGGGTCTACTGAAATTAGCAGCTTGC-3'). The resulting PCR fragments contained complementary ends to the spectinomycin cassette of pUS19 (underlined). Using pUS19 as a template and the PCR fragments as megaprimers, a fusion construct was generated containing the spectinomycin cassette of pUS19 flanked by the up- and downstream homologous regions of clpE. The construct was 3'-adenylated using the A-addition kit (QIAGEN) and ligated into the pGEM-3'-T-overhang vector (Promega) to create pGEM
clpE. The construct was linearized and transformed into B. subtilis. Spectinomycin-resistant transformants were selected, and the deletion of the clpE gene was verified by PCR and Western analysis using ClpE-specific antibodies.
Construction of a clpE conditional mutant. A 500-bp promoterless clpE fragment starting with the Shine-Dalgarno site was amplified with primer pair CLPE_FOR_X2(BamHI) (5'-CGGGATCCCAAATTATTAAGGAGGTTTTGGC-3') and CLPE_REV_X2(BamHI) (5'-CGGGATCCTTTCATTCTCTCCTCAAATTGG-3') (restriction sites underlined) and ligated after digestion with BamHI in the appropriate treated plasmid pX2 to create pX2clpE'. The correct orientation of the insert was confirmed by PCR and restriction digestion. The vector construct was transformed into B. subtilis and integrated via Campbell-type integration into the chromosomal locus of clpE, leaving the full-length transcript under control of the Pxyl promoter. Chloramphenicol-resistant transformants were selected, and the chromosomal insertion was verified by PCR. DNA sequencing of the new generated clpE locus confirmed the expected changes in the promoter region and displayed no nucleotide changes in the clpE open reading frame. Xylose induction of clpE was confirmed by Western blotting and immunodetection using ClpE-specific antibodies.
Site-directed mutagenesis.
To mutate the N-terminal zinc finger of ClpE, the cysteine codons 29 (TGT) and 32 (TGC) of clpE were changed into serine codons (TCT and AGC, respectively). This was done by PCR with primer pair CLPE_ZNF_MUT_FOR (5'-GTTCATAAACAGATGGTTCTTTCTGAAACTAGCTATAACGAAC-3') (nucleotide changes are underlined) and CLPE_ZNF_MUT_REV (5'-AAAGAACCATCTGTTTATGAACGGAATTTATTTGC-3'). Using the GeneTailor site-directed mutagenesis system (Invitrogen), the DNA template pRSETAclpE was specifically methylated by DNA methylase. After PCR, the DNA of the reaction mixture was transformed into E. coli DH5
-T1, a strain containing endonuclease McrBC that selectively cleaved the methylated DNA template, allowing only the replication of the nonmethylated PCR product pRSETAclpEC29,32S. Ampicillin-resistant transformants were selected, the plasmids were isolated and the expected nucleotide changes were confirmed by DNA sequencing (Agowa, Berlin, Germany).
Northern analysis. For total RNA isolation, the cells were grown exponentially in BOC medium and samples were taken from 37°C (control) and 50°C (heat stress) cultures after 0, 5, 25, and 45 min. RNA isolation, gel electrophoresis, blotting, and hybridization were performed as described previously (17). Digoxigenin-labeled antisense RNA probes specific for clpC (tetracistronic transcript), clpP, and clpX (12) and for groESL were used from existing stocks. Northern blots were developed using a digoxigenin-specific antibody conjugated with alkaline phosphatase (Roche) and CDP-Star (Applied Biosystems) as a chemiluminescence substrate. Signal detection and quantitation were done with a LUMI-Imager (Roche).
Protein purification and ATPase assay. The recombinant proteins His6-ClpE and His6-ClpEC29,32S were overproduced in E. coli BL21(DE3)/pLysS for 2 h after induction with 1 mM IPTG (isopropyl-ß-D-thiogalactopyranoside) at an OD540 of 0.4 and purified by Ni-nitrilotriacetic acid affinity chromatography under native conditions according to the instructions of the manufacturer (QIAGEN). After determination of the purified protein amounts, aliquots were stored in 20% (vol/vol) glycerol at 20°C. For the determination of the in vitro ATPase activity, a colorimetric assay was used according to a described protocol (38). Reactions were carried out at 37°C in each 300-µl total volume containing 2, 3, or 4 µg of purified His6-ClpE or His6-ClpEC29,32S in ATPase buffer (20 mM Tris-HCl [pH 8.0], 100 mM KCl, 5 mM MgCl2, 0.5 mM dithiothreitol). To determine the degree of spontaneous ATP hydrolysis during the assay, a control sample without any enzyme was incubated in parallel. Each reaction was started by addition of 2 mM ATP. After 0, 5, 10, 20, and 40 min, 50-µl samples were taken from the reaction mixtures and were transferred into 800 µl ammonium molybdate-malachite green solution (containing 0.1% [vol/vol] Triton X-100). The sample mixtures were incubated for 2 min at room temperature to allow formation of inorganic phosphate complex compounds, before addition of 2% (wt/vol) citric acid. Absorption values of the samples were measured at OD660 using the control reactions as reference samples. A calibration curve was used to calculate the ATP turnover from the corresponding absorption values.
Pulse-chase radiolabeling and quantitation of protein aggregates.
Cell cultures of the wt and the clpE mutant were grown to the exponential phase in BOC medium supplemented with 0.01% yeast (Saccharomyces cerevisiae) extract at 37°C. At an OD500 of 0.4, vegetative proteins were radiolabeled by adding L-[35S]methionine (6.75 µCi/ml) to the cultures. After a pulse of 10 minutes, L-[35S]methionine was chased by adding an excess (
200,000-fold) of nonradioactive L-methionine, and the cultures were immediately thermally upshifted to 50°C. Samples were taken with the beginning of the heat shock at 0, 10, 20, 40, and 60 min. The samples were treated as previously described (21). Protein concentrations were quantified in the soluble fractions by Roti-Nanoquant assay to create a calibration curve with the corresponding count-per-minute values which was used to determine the quantities of radiolabeled protein in the pellet factions of the samples.
Radiolabeled immunoprecipitation assay.
For assaying the stability of CtsR in the wt and several clp mutant strains, the cells were grown to the exponential phase in BOC medium supplemented with 0.01% yeast extract at 37°C. At an OD500 of 0.5, cultures were thermally upshifted to 50°C and, at the same time, L-[35S]methionine (25 µCi/ml) was added to radiolabel heat shock-induced proteins. Because both CtsR and ClpE are short-living proteins in the wt cytoplasmic fraction after heat shock, the labeling time was shortened to 5 min. After 5 min of labeling, L-[35S]methionine was chased by adding an excess (
200,000-fold) of nonradioactive L-methionine, and samples of 2 ml were taken at 0, 5, 10, 30, 60, 120, and 180 min. After centrifugation (21,000 x g at 4°C for 10 min), cells were resuspended in 53.33 µl of lysis buffer (50 mM Tris-HCl [pH 7.5], 5 mM EDTA, 4 mg/ml [wt/vol] lysozyme, 1.4 mM PMSF) and incubated for 20 min at 37°C. For complete cell lysis, 8 µl of 10% [wt/vol] SDS was added and the samples were incubated for 5 min at 95°C. Then, 720 µl of KI buffer (50 mM Tris-HCl [pH 8.0], 1 mM EDTA, 150 mM NaCl, 1% [vol/vol] Triton X-100, 1.4 mM PMSF) was added and samples were incubated on ice for 15 min. After centrifugation (21,000 x g at 4°C for 45 min), the supernatants were incubated with CtsR-specific polyclonal antibodies (in 1:30 dilution) overnight under slow-tilt rotation at 4°C. A suspension of 40 µl of protein A-coated Dynabeads (Dynal) equilibrated with KI buffer was added to each sample for an additional incubation time of 2 h, ensuring quantitative capture of CtsR. The beads were washed three times in 500 µl of KI buffer and, finally, boiled in 10 µl of SDS sample buffer for 5 min at 95°C. After protein separation by 15% one-dimensional SDS-PAGE with an appropriate marker (BenchMark prestained ladder; Invitrogen), gels were vacuum dried and exposed on a phosphor screen (Molecular Dynamics) overnight. Autoradiographs were detected by scanning with a Storm 840 (Molecular Dynamics), and the marker was transferred by size comparison with the corresponding gel stencils. CtsR-specific signals were then evaluated by size comparison with the transferred marker. The experiments were conducted three times, and a stabilization of CtsR in the clpE background was observed when the radiolabeling time interval was further shortened to 2.5 min.
|
|
|---|
The Northern analysis of clpP expression (Fig. 1A) showed a very low basal level of clpP transcription under control conditions at 37°C in both the wt and the clpE mutant. After a thermal upshift, clpP was induced in both strains; however, it was stronger in the wt than in the clpE mutant. After 25 min of heat shock, clpP expression decreased to the basal level in the wt, revealing a short time window for clpP derepression during heat stress (see references 11 and 15). Contrarily, the clpE mutant showed a retarded clpP induction, indicating a reduced efficiency in CtsR-dependent derepression. Furthermore, the period of derepression was significantly increased. The same kind of Northern analysis displayed a reduced induction and a prolonged derepression of the clpC operon after heat shock in the clpE mutant as well. However, after 45 min of heat shock, the repression of both the clpP gene and the clpC operon was restored to more than 50% compared to the 5-min induction level in the
clpE background (data not shown). Because the clp transcripts have half-lives of less than 2 min at 50°C, stabilizing effects at the posttranscriptional level could be neglected (12).
![]() View larger version (14K): [in a new window] |
FIG. 1. Expression profiles of CtsR-dependent genes in wt and clpE mutant strains after heat induction at 50°C. (A) Northern analysis of clpP transcript amounts before (co, control, 37°C) and at indicated time points (5 and 25 min) after thermal upshift (50°C) of exponentially growing cells. Each lane contains 5 µg of total RNA. (B) BgaB reporter gene analyses for clpE promoter activity before (co, 37°C) and to indicated time points (15, 30, 60, and 90 min) after dividing the cell cultures in mid-exponential phase (OD540, 0.5) for further growth at 37°C and 50°C, respectively. 5', 5 min; 25', 25 min.
|
Similar results were obtained for the clpE promoter activity by clpE'-BgaB measurements (Fig. 1B). The basal expression at 37°C was low in both strains. During heat stress, however, the wt showed a high initial induction level that subsequently declined as expected. In contrast to that, a different induction pattern was observed in the clpE mutant during heat stress. After 15 min, the induction in the clpE mutant was reduced approximately by half and increased during the first 30 min of heat stress, whereas a slow decrease followed during the next hour. The growth of the clpE mutant was slightly diminished in comparison to that of the wt after heat shock.
Further Northern analyses confirmed that the expression of groESL (class I heat shock operon, HrcA regulated [36]) and clpX (class IV heat shock gene, unknown regulation [10, 12]) did not show any significant differences between the wt and the clpE mutant during heat shock (data not shown), suggesting that ClpE is a specific factor for CtsR-dependent gene expression during heat stress.
CtsR is a putative substrate of ClpEP-dependent degradation after heat shock. CtsR degradation was shown to depend on ClpCP after heat-simulating puromycin stress (25). Now, a radiolabeling approach was chosen to determine Clp-dependent effects on CtsR stability. Figure 2 illustrates the stability of radiolabeled CtsR in wt and clp mutant backgrounds during heat stress. As already known, the stability of the repressor was rather low in the wt but steadily constant in the clpP mutant, underlining the essentiality of the ClpP protease in CtsR degradation. Strikingly, there was only a partial stabilization of CtsR in both the clpC and clpE mutants. The clpC mutant displayed a decrease of pulse-labeled CtsR after stress comparable to the wt. However, the remaining amount of CtsR after 30 min was stabilized over the whole sampling time of 3 hours. Conversely, the clpE mutant showed a complete stabilization of CtsR in the first 30 min of the stress but a rapid decline at the later stage down to the wt level. These data suggest that both ClpCP and ClpEP are involved in CtsR degradation after heat shock. To elucidate whether the remaining ClpP interaction partner, ClpX, was also involved in CtsR destabilization, both the clpX mutant and the clpCE double mutant were investigated. The clpX mutant displayed the same CtsR destabilization pattern as the wt, whereas the clpCE double mutant showed a complete stabilization of CtsR 3 hours after heat shock. This indicates that CtsR degradation exclusively depends on the ClpCP and ClpEP proteolytic systems after heat shock. Furthermore, the different kinetic profiles of ClpCP- and ClpEP-dependent CtsR destabilization suggest two separate pathways for CtsR degradation.
![]() View larger version (64K): [in a new window] |
FIG. 2. Stability of radioactively labeled CtsR after heat shock in wt and several clp mutant backgrounds. The strains were grown in BOC medium up to the exponential phase. Heat stress and radioactive protein labeling by adding L-[35S]methionine ("pulse") started at the same time at an OD500 of 0.5. After 5 minutes, further incorporation of radioactivity was stopped by adding an excess of nonradioactive L-methionine ("chase"). The chase marks the beginning of the sampling at the indicated time points (0, 5, 10, 30, 60, 120, and 180 '[min]). After cell disruption and separation of the soluble fractions, CtsR was immunoprecipitated with specific antibodies. The CtsR-antibody complexes were separated ferromagnetically with protein A-conjugated beads. After washing, CtsR was released from the complexes by heat denaturation. Elution fractions were quantitatively loaded on a gel and separated by one-dimensional SDS-PAGE. Detection of the radioactive signals was done by autoradiography.
|
![]() View larger version (23K): [in a new window] |
FIG. 3. Detection of ClpE by Western blot analysis in soluble (cytoplasmic) and insoluble ("pellet") fractions of cells from the wt (A) and strain BMM11 (B) before (co, control, 37°C) and at indicated time points (', min) after heat shock (50°C). After cell disruption, the fractions were separated and the "pellet" was resolubilized in high-concentration urea buffer. In the lanes of the soluble fractions, 25 µg of total soluble protein each was separated, whereas for the lanes of the insoluble fractions, equal volumes of the "pellet" solutions were loaded onto the gel. In order to induce ClpE in strain BMM11, 0.5% xylose was added at the beginning of the exponential phase (+ xyl).
|
![]() View larger version (191K): [in a new window] |
FIG. 4. Detection of subcellular localized ClpE in wt cells 10 min after heat shock. Cryosections of the cells were incubated with ClpE-specific antibodies and, afterwards, with primary-antibody-specific gold-conjugated secondary antibodies. Signal detection of the gold particles was carried out by electron microscopy. Accumulation of signals is indicated with the arrows.
|
![]() View larger version (9K): [in a new window] |
FIG. 5. Stability of radioactively labeled protein in insoluble cell fractions after heat shock in the wt and the clpE mutant. Radioactive protein labeling took place by the addition of L-[35S]methionine to exponentially growing cell cultures at 37°C. After 10 min, labeling was stopped by adding an excess of nonradioactive L-methionine to the cultures, which were promptly shifted to 50°C. Samples were taken 0, 10, 20, 40, and 60 min after the beginning of the heat stress. Cells were washed and disrupted by sonication. Soluble and insoluble fractions were separated and, after further wash steps of the insoluble fractions followed by resolubilization, radioactivity was measured by liquid scintillation counting using the filter disk method. Determination of total protein in the corresponding soluble fractions allowed calculation of total protein in the pellet fractions referring to the counts-per-minute values.
|
Thus, the stabilization of heat-generated insoluble protein aggregates in the clpE mutant suggests for the first time a physiological role of the ClpE ATPase in protein quality control in B. subtilis.
The N-terminal zinc finger of ClpE is crucial for basal ATPase activity. The ClpE ATPase possesses an N-terminal zinc finger of the C4 type (Cys3,6,29,32) as a characteristic structural element. For a functional characterization of this domain, the clpE gene of B. subtilis was cloned into a pRSETA expression vector containing an N-terminal His6 translational fusion tag. The vector construct was subsequently used for a site-directed mutagenesis that altered two cysteine codons of the zinc finger at positions 29 and 32 to serines, leading to the destruction of the zinc finger. Both the native ClpE and the zinc-deficient N-terminal His6-tag derivative of ClpE were overexpressed and purified. The ATPase activities of both derivatives were determined in vitro by a colorimetric ATPase assay. Measurements were performed without substrates except ATP, to display the basal ATPase activity of the ClpE derivatives. Figure 6 shows the data for three measurements with different amounts of each His6-ClpE and His6-ClpEC29,32S. Mean values that were calculated from the linear ranges of the kinetics exhibited a basal ATP turnover of 45.3 molecules of ATP min1 monomer1 for His6-ClpE, but only 5.3 molecules of ATP min1 monomer1 for His6-ClpEC29,32S. Thus, the basal ATPase activity of the zinc-deficient ClpE derivative was diminished to about 10% of the native ClpE ATPase activity, indicating that the ClpE zinc finger is crucial for ATPase activity.
![]() View larger version (8K): [in a new window] |
FIG. 6. Determination of basal in vitro ATPase activity of His6-ClpE and His6-ClpEC29,32S by nonradioactive ATPase assay. Different quantities (2, 3, and 4 µg each) of both enzymes were incubated with 2 mM ATP in assay buffer at 37°C. Samples were taken 0, 5, 10, 20, and 40 min after the start of the reaction, and complex formation of released orthophosphate with malachite green was measured colorimetrically using reference samples without enzyme. A calibration curve was used to bring the net absorption values into reference to the amounts of enzymatically hydrolyzed ATP. The mean values ( ) for ATP turnover in the linear ranges of the kinetics are in molecules of ATP min1 monomer1.
|
|
|
|---|
A clpE mutant showed a characteristic phenotype concerning the expression patterns of CtsR-dependent genes after heat shock, and absence of ClpE diminished cell growth slightly during heat stress at 50°C (Fig. 1). A lag of growth at 54°C was already described for a B. subtilis clpE mutant (7), while the data for CtsR-dependent gene expression are similar to those of an L. lactis clpE mutant, showing a prolonged derepression of the CtsR-regulated clpP gene after heat shock (40). The observed phenotype might partly be explained by the new data presented in this study.
ClpE was found to be involved in CtsR destabilization in the soluble cell fraction during heat stress. The global repressor CtsR autoinduces its own synthesis by derepression of the clpC operon after heat shock. Former studies showed the involvement of ClpCP in CtsR degradation after heat-simulating puromycin stress (25). However, the partial stability of radioactively labeled CtsR in the clpC mutant observed in this study revealed that this is only one pathway of CtsR degradation after heat shock. Indeed, the data showed a significant stabilization of radioactively labeled CtsR in the clpE mutant in the first 30 min after the thermal upshift, suggesting that ClpEP dominates the CtsR degradation at the early stage of heat stress, thereby ensuring an efficient derepression of class III heat shock genes. This proposal is strongly supported by the data of Fig. 1, showing a significantly reduced heat induction for CtsR-dependent clpE and clpP expression in the clpE mutant. The diminished heat induction might result from a retarded CtsR degradation via the congested ClpCP pathway in the absence of ClpEP and might in addition be one reason for the subsequent delay of CtsR-dependent rerepression. The period of CtsR stabilization in the clpE mutant corresponds to the time window of ClpE traceability in the cytoplasmic fraction of wt cells (Fig. 3A), indicating that ClpEP mainly acts on CtsR degradation during the short period of derepression immediately after heat shock. These observations indicate an essential role for ClpEP in CtsR-dependent gene derepression by destabilizing the CtsR repressor. After degradation of ClpE in the soluble fraction of wt cells, ClpCP seems to become the main actor of CtsR degradation, because the clpC mutant still showed a stabilized lower level of labeled CtsR after 3 hours of heat stress. In accordance with that, a reduced CtsR-dependent heat induction was also observed in clpC and clpP mutants at the clpE promoter (25).
Thus, CtsR degradation after heat shock turns out to be a fine-tuned mechanism depending on the proteolytic systems ClpCP and ClpEP. The systems might represent two separate CtsR degradation pathways. As the different CtsR destabilization patterns of the corresponding mutants indicate, one pathway leads to rapid CtsR degradation at the early stage of heat induction by ClpEP, the other one to the complete removal of remaining CtsR by ClpCP. The complete stabilization of labeled CtsR in the clpCE double mutant strongly indicates that there are no further Clp ATPases involved in CtsR destabilization after heat shock. Further in vitro experiments concerning the ClpEP-dependent degradation of CtsR are planned to confirm the proposals from the presented in vivo data.
The possibility that the ClpE ATPase might be directly involved in disaggregation of heat-denatured proteins was supported by localization of ClpE in the insoluble fraction of the cells immediately after heat shock and, more precisely, at electron-dense particles known as heat-generated protein aggregates. A significant difference in protein disaggregation efficiency in the wt and the clpE mutant was confirmed subsequently by radioactive labeling and quantitation of the heat-aggregated protein fractions, showing a delay of protein disaggregation of about 1 hour in the clpE mutant during heat stress. It is likely that ClpE does not act on protein aggregates exclusively as a chaperone but together with ClpP as in the case of CtsR degradation. The accumulation of ClpC and ClpP at heat-generated protein aggregates has been shown in former studies (24). Mutations or deletions of clpC and especially clpP are known to cause severe defects in the removal of aggregated cell protein (21, 23, 27). It is now conceivable that ClpCP and ClpEP might act synergistically on protein disaggregation after heat shock. Both systems might furthermore replace each other in the disaggregation process, so that the loss of the ClpEP protease system caused by clpE deletion might be compensated for by ClpCP. However, the increasing ClpCP amounts after heat shock that have been quantified in the wt (12) are likely to be reduced in the clpE mutant due to the observed stabilization of CtsR that putatively causes the retarded CtsR-dependent heat induction. This leads to a model of stronger and prolonged ClpCP sequestration to heat-denatured proteins in the clpE mutant. That a sufficient level of free ClpC in the cell seems to be critical for the repression of CtsR-dependent genes is supported by a recent study showing that only unsequestered ClpC almost completely inhibits the McsB kinase which negatively regulates CtsR activity (20). Coincidently, in the wt, where the amount of labeled aggregated protein was decreased to the control level after 20 min of heat shock, the CtsR-dependent gene repression was shown to be completely restored after the first 25 min of heat shock, whereas the rerepression was significantly retarded in the clpE mutant (Fig. 1A). In conclusion, the involvement of ClpE in both CtsR destabilization and protein disaggregation after heat shock might provide the main reason for the observed delay of CtsR-dependent rerepression of the class III heat shock genes in the clpE mutant. As the experimental results indicate, ClpE(P) turns out to be an important backup system of B. subtilis for the development of thermotolerance.
One characteristic domain of the ClpE ATPase is the N-terminal C4-type zinc finger. A similar domain is also part of the ClpX ATPase that, in turn, bears only one instead of two domains for ATP binding and hydrolysis and therefore belongs to the AAA+ class II proteins (8, 30, 34). A structure-function analysis of the E. coli ClpX ATPase revealed that a zinc-deficient derivative was unable to bind ATP, to oligomerize, or to bind to ClpP (2). The focus here was to investigate whether this enzymatic loss of function was also true for a zinc-deficient ClpE ATPase. Indeed, the ClpE derivative with the mutated zinc finger showed an approximately tenfold loss of basal ATPase activity in vitro, showing that this structure element is crucial for the basic ClpE function. A clpE mutant-like phenotype that was observed for an L. lactis strain carrying a clpE gene with a mutated zinc finger motif already indicated a relevant function of this domain for ClpE ATPase activity in vivo (40).
Strikingly, the basal ATP turnover of ClpE reached unexpected high values. Measurements at 30°C and 37°C obtained ATP hydrolysis rates of about 300 to 400 molecules of ATP per minute and putative ClpE hexamer. By comparison, the basal ATPase activity of E. coli ClpX was recently determined with a turnover rate of 140 molecules of ATP per minute and hexamer at 30°C (4). The combination of this fact with results from further studies showing a direct connection between ATPase activity and the effectiveness of substrate denaturation and degradation by E. coli ClpXP (18) supports the suggestion that ClpE might act as an effective protein-disaggregating ATPase under conditions that urgently require such a strong physiological activity. This seems especially important for adaptation to heat and diamide stress (see reference 26) leading to the highest known levels of clpE induction. In terms of genome evolution, it might be speculated that the strong activity of the ClpE ATPase, once established, may have driven its tight epigenetic regulation that is realized at the transcriptional, posttranscriptional, and posttranslational levels (7, 12). Further biochemical characterization of ClpE function and screening for specific substrates should lead to a deeper understanding of its part in cellular protein quality control.
This work was supported by grants from the Deutsche Forschungsgemeinschaft (HE 1887/6-5, -6-6) and the EU (LSHG-CT-2004-503468) to M.H.
|
|
|---|
B levels and activity in Bacillus subtilis. J. Bacteriol. 175:2347-2356.This article has been cited by other articles:
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Copyright © 2009 by the American Society for Microbiology. For an alternate route to Journals.ASM.org, visit: http://intl-journals.asm.org | More Info»