Previous Article | Next Article ![]()
Journal of Bacteriology, July 2006, p. 4812-4821, Vol. 188, No. 13
0021-9193/06/$08.00+0 doi:10.1128/JB.00176-06
Copyright © 2006, American Society for Microbiology. All Rights Reserved.
Department of Biochemistry and Molecular Biology, I, Facultad de Ciencias Biológicas, Universidad Complutense, 28040 Madrid, Spain,1 Department of Molecular Microbiology, Centro de Investigaciones Biológicas, CSIC, 28040 Madrid, Spain,2 The Burnham Institute for Medical Research, La Jolla, California 92037,3 Department of Molecular Biology, Umeå University, S-901 87 Umeå, Sweden4
Received 2 February 2006/ Accepted 6 April 2006
|
|
|---|
|
|
|---|
![]() View larger version (19K): [in a new window] |
FIG. 1. Styrene catabolic genes and enzymatic pathway of Pseudomonas sp. strain Y2. (A) Genetic map of the sty and paa1 gene clusters of Pseudomonas sp. strain Y2. The PstyA promoter controlled by the StySR proteins regulates expression of the sty catabolic genes (styABCD) that encode the enzymes responsible for the transformation of styrene to phenylacetate; styE encodes a putative porin (38). The paaF2N2ABCDEFGHIJKPLN genes encode the enzymes that transform phenylacetate into metabolites of the Krebs cycle; paaXY genes encode regulatory proteins. The consensus nomenclature for the paa genes proposed by Luengo et al. (23) has been used. Arrows indicate the direction of transcription (1). (B) Styrene upper and lower catabolic pathways. Compounds are as follows: 1, styrene; 2, styrene oxide; 3, phenylacetaldehyde; 4, phenylacetate; 5, phenylacetyl-CoA; 6, hydroxy derivative of phenylacetyl-CoA; 7, aliphatic derivative of phenylacetyl-CoA; 8, intermediate metabolites of tricarboxylic acids cycle. Enzymes and proteins are as follows: StyAB, styrene monooxygenase; StyC, epoxystyrene isomerase; StyD, phenylacetaldehyde dehydrogenase; PaaL, permease; PaaP, membrane protein; PaaF and PaaF2, phenylacetyl-CoA ligases; PaaGHIJK, putative multicomponent phenylacetyl-CoA oxygenase; PaaN, PaaN2 and PaaABCDE, putative enzymes involved in ring-cleavage- and ß-oxidation-like reactions of the aliphatic-CoA intermediate. "Out" and "in" refer to the periplasmic and cytoplasmic spaces, respectively (1, 4).
|
Pseudomonas sp. strain Y2, a strain able to degrade styrene via the sty pathway (styABCD) (38), contains two functional copies of the paa gene cluster, named paa1 and paa2 (1, 4), that serve as the styrene lower catabolic pathways. Therefore, this strain also contains two copies of the PaaX regulator, designated PaaX1 and PaaX2, which share 86% identity (1, 4). In this work, we present in vivo and in vitro evidence that the regulation of the PstyA promoter in Pseudomonas sp. strain Y2 is more complex than previously envisioned, since the PaaX regulator also binds to this promoter to repress transcription in the absence of PA-CoA. This finding expands our current view of the PaaX regulon to include the catabolism of toxic aromatic compounds, such as styrene, and places the PaaX protein at the center of an interesting case of an integrated regulatory strategy for the catabolism of aromatic compounds (reviewed by Shingler [34]), namely, a mechanism in which transcriptional control of the expression of the catabolic genes integrates responses to both a substrate (styrene through StyR/StyS) and a pathway intermediate (PA-CoA through PaaX). Conceptually, this regulatory scheme is reminiscent of that reported for the substrate benzoate and intermediate cis-muconate in control of benzoate catabolism through the ß-ketoadipate pathway (7, 8).
|
|
|---|
|
View this table: [in a new window] |
TABLE 1. Bacterial strains and plasmids
|
|
View this table: [in a new window] |
TABLE 2. Primer sequences
|
pir strain. Finally, the mobilizable pKXKm suicide plasmid was conjugated to Pseudomonas sp. strain Y2T2 as previously described (1). Plating on kanamycin, tetracycline, and sucrose-containing medium was used as the method of selection for double recombinants, which were verified by screening for loss of the suicide plasmid by testing sensitivity to streptomycin and by PCR (data not shown) using BluntX5 and X3 primers (Table 2). The in vitro transcription plasmid pTE-E1B1 was generated using primers E1 and B1 that amplify the 148-to-+67 PstyA region (Fig. 2) as an EcoRI-to-BamHI fragment that was cloned between these sites of pTE103. Supercoiled DNA was prepared by CsCl gradient, extensively dialyzed, and clarified through Micro Bio-Spin P30 columns (Bio-Rad) equilibrated with 20 mM Tris-HCl, pH 7.5, to remove trace CsCl prior to use in vitro transcription assays.
![]() View larger version (26K): [in a new window] |
FIG. 2. Sequence of the PstyA region of Pseudomonas sp. strain Y2. The 3' end of styR and the 5'-end region of styA are in boldface letters. The StyR binding site proposed for Pseudomonas sp. strain Y2 (38) is underlined. The high- (STY2), medium- (STY1), and very-low-affinity (STY3) StyR binding sites of P. fluorescens ST proposed by Leoni et al. (22) are overlined. The IHF binding site, the extended 10 box of PstyA promoter, the transcription start site (+1) for styA, and the PaaX binding site (PaaX box) are underlined. The locations and sequences of styAXR and styAXL oligonucleotides used to amplify the STY probe and the E1 and B1 oligonucleotides used to amplify the styR-styA intergenic region are indicated in lowercase letters.
|
The MBP-PaaX1 fusion protein expressed by E. coli UT5600 harboring pM-X1 was purified through amilose chromatography columns as described in the pMAL protein fusion and purification system protocol (New England Biolabs) and conserved in the elution buffer (20 mM Tris-HCl, pH 7.5, 250 mM KCl, 15 mM maltose). Expression of the His-StyR fusion protein in E. coli MV1184 cells carrying plasmid pQ-R was induced by culturing in the presence of 1 mM IPTG (isopropyl-ß-D-thiogalactoside) for 6 h. The fusion protein was purified from crude extracts prepared in lysis buffer (20 mM potassium phosphate, pH 7.5, 500 mM NaCl) by affinity chromatography using a Chelating Sepharose Fast Flow matrix (Amersham Biosciences) previously charged with NiCl2 and equilibrated with lysis buffer. After washing with lysis buffer containing 75 mM imidazole, the His-StyR protein was eluted with lysis buffer containing 500 mM imidazole and buffer exchanged to 20 mM Tris-HCl, pH 7.5, 250 mM KCl, 5% glycerol using the Micrococon YM-10 centrifugal filter unit system (Millipore). Purified proteins were stored at 80°C.
Electromobility shift and DNA footprinting assays.
The STY DNA probe was generated by PCR amplification using plasmid pISm7.0R and primers styAXL and styAXR (Fig. 2; Tables 1 and 2). Radioactivity was incorporated via the styAXL primer that was prelabeled by using [
-32P]ATP (>3,000 Ci/mmol) and T4 polynucleotide kinase. The resulting radioactive PCR product was purified using the High Pure PCR product purification kit (Roche). Electromobility shift reaction mixtures (9 µl final volume) containing 0.1 nM STY probe, 50 µg/ml salmon sperm DNA, the indicated amount of crude extract or purified MBP-PaaX1, and 50 µg/ml bovine serum albumin in T buffer (20 mM Tris-HCl, pH 7.5, 10% glycerol, 2 mM ß-mercaptoethanol, 50 mM KCl) were incubated for 20 min at 20°C. The resulting complexes were analyzed by electrophoresis in 5% polyacrylamide gels buffered with 0.5x TBE (45 mM Tris-borate, 1 mM EDTA). The gels were dried onto Whatman 3MM filter paper and exposed to Hyperfilm MP (Amersham Biosciences).
DNase I footprinting reaction mixtures (15 µl final volume) were prepared and incubated with the indicated amount of MBP-PaaX1 as described above. Three microliters of DNase I (0.05 units DNase I from Amersham Biosciences prepared in 10 mM Tris-HCl, pH 7.5, 10 mM MgCl2, 10 mM CaCl2, 125 mM KCl) was added and reaction mixtures further incubated at 37°C for 20 to 25 s. The reactions were terminated by the addition of 180 µl of a solution containing 0.4 M sodium acetate, 2.5 mM EDTA, 50 µg/ml calf thymus DNA, and 0.3 µl/ml glycogen. After phenol-chloroform extraction, the samples were precipitated and washed with 70% ethanol, dried, and resuspended in 4 µl of 90% (vol/vol) formamide loading buffer (10 mM Tris-HCl, pH 8.0, 20 mM EDTA, 0.05% [wt/vol] bromophenol blue, 0.05% [wt/vol] xylene cyanol). Samples were denatured at 95°C for 5 min and analyzed on a 7% denaturing polyacrylamide-urea gel. A+G Maxam and Gilbert sequencing reactions (24) with the same DNA fragment were loaded along the footprinting samples, and the gels were treated as described above.
In vitro transcription assays.
Reactions (20 µl final volume) were performed at 30°C in transcriptional buffer containing 50 mM Tris-HCl, pH 7.5, 50 mM KCl, 20 mM MgCl2, 1 mM dithiothreitol, 0.1 mM EDTA, and 0.2 mg/ml bovine serum albumin. Purified His-StyR was phosphorylated just prior to in vitro-transcription assays by incubation at 28°C for 45 min in the same buffer supplemented to 20 mM MgCl2 and 20 mM acetylphosphate. E. coli
70-RNA polymerase (Epicenter) (10 nM), the pTE-E1B1 template (5 nM), purified E. coli IHF (20 nM), phosphorylated His-StyR (2 µM), and the indicated amounts of purified MBP-PaaX1 and PA-CoA were mixed and incubated for 15 min to allow open complex formation. Multiple-round transcription was initiated by adding a mixture of 500 µM ATP, 200 µM GTP, 200 µM CTP, 80 µM UTP, and 5 µCi of [
-32P]UTP (>3,000 Ci/mmol; Amersham Biosciences). After 5 min of incubation, reinitiation was prevented by the addition of heparin (0.1 mg/ml), and 5 min later, the reactions were terminated by adding 5 µl of stop/loading buffer (150 mM EDTA, 1.05 M NaCl, 14 M urea, 10% glycerol, 0.037% xylene cyanol, 0.037% bromophenol blue). Samples were analyzed on a 7 M urea-5% polyacrylamide sequencing gel and quantified using an Amersham Biosciences phosphorimager. Transcript production was normalized to the production of the RNA-1 transcript from the pTE plasmid vector.
Quantitative RT-PCR. For RNA isolation, Pseudomonas strains were grown in M9 minimal medium (25) with 0.8% (wt/vol) glycerol as the sole carbon and energy source until the culture OD600 reached 0.6. E. coli cells were grown in M63 medium (25) with 0.4% (wt/vol) glycerol as the sole carbon and energy source until the culture OD600 reached 0.4, and then IPTG (1 mM) was added to induce PaaX1 expression from the resident plasmid until cultures reached an OD600 of 0.6. At that point, each culture was divided into two flasks. One flask of every pair was induced with styrene supplied in gas phase via saturated atmosphere (Pseudomonas cultures for 5 min; E. coli cultures for 30 min), whereas the other was left uninduced. TRI reagent (Ambion) and RNAqueous kit (Ambion) were used to extract the total RNA from 12-ml culture samples according to the manufacturer's instructions. Agarose gel electrophoresis confirmed the integrity of the RNA. For cDNA synthesis, 2.5 µg of total RNA as determined spectrophotometrically was incubated for 3 h at 42°C with 200 U of SuperScript II reverse transcriptase (Invitrogen) in the presence of random hexamer primers. Control reactions to assess the level of DNA contamination in the RNA samples were carried out without reverse transcriptase. Once the reactions were completed, RNase A (Roche) and RNase H (USB) were added to the reaction mixtures to remove the remaining RNA. The synthesized cDNA was purified using a QIAquick PCR purification kit (QIAGEN), and its concentration was determined spectrophotometrically. Real-time PCR (RT-PCR) was performed using an ABI PRISM 7700 sequence detection system (Applied Biosystems) with SYBR green PCR master mix (Applied Biosystems). Master mixtures were prepared as recommended by the manufacturer, with primer concentrations optimized for each primer pair. The QstyA (F) and QstyA (R) primers (Table 2) amplify a 73-bp fragment of styA. Internal standards for normalization were provided by the QTcR2 (F) and QTcR2 (R) primers and the ApL2 and ApR2 primers (Table 2) that amplify a 74-bp fragment and an 82-bp fragment from the tetA (tetracycline resistance) and bla (ampicillin resistance) genes, respectively. For quantification, standard curves of cDNA dilutions (1:10 to 1:10,000) were made in duplicate for each primer pair. PCR efficiencies were similar, allowing direct comparison of results.
|
|
|---|
![]() View larger version (43K): [in a new window] |
FIG. 3. PaaX binding sites. Comparison of PaaX binding sites of several promoters of E. coli W (GenBank accession number X97452) and Kluyvera citrophila (M15418) with putative PaaX binding sites found in the paa promoters of P. putida KT2440 (AE015451), P. putida U (AF029714), P. fluorescens Pf-5 (NC004129), and Pseudomonas sp. strain Y2 (AJ000330 and AJ579894) and with the PaaX binding site identified in PstyA. PG (formerly Pa), PN (formerly Pz), and PX refer to the promoters that control transcription of the three paa operons of E. coli. Ppac is the promoter that drives the transcription of the penicillin G acylase gene. PpaaA, PpaaG, PpaaA2, PpaaG2, and PpaaB are promoters of the corresponding paa genes of Pseudomonas species. PstyA is the promoter that controls the transcription of the styABCD styrene catabolic operon of Pseudomonas sp. strain Y2. The location of the region encompassing both 6-bp inverted repeats relative to the putative transcription start point is given in parentheses at right. Consensus sequences of putative PaaX binding sites are also displayed. Nucleotides identical to the consensus are shown in uppercase bold letters. Conserved nucleotides between the E. coli and Pseudomonas consensus sequences are underlined. The region of PstyA protected by PaaX1 of Pseudomonas sp. strain Y2 against DNase I is displayed as a box (see the text).
|
paa1) and T2 (
paa2), that lack either paaX1 or paaX2, were able to bind and retard the migration of the STY probe. However, crude extracts from Pseudomonas sp. strain Y2K1T2, a double paa deletion mutant (
paa1
paa2), did not retard migration of the STY probe (Fig. 4, lane 4). Interestingly, retardation of the STY probe increased significantly when using a crude extract from Pseudomonas sp. strain Y2 harboring pVLTX1 (Fig. 4, lane 7), which overexpresses PaaX1 from the Ptac promoter of the plasmid. P. putida KT2442 and P. putida U lack the specific StyR regulator; therefore, these results suggest that the paaX gene products of different Pseudomonas strains might bind the PstyA promoter and that both the paaX1 and paaX2 gene products of Pseudomonas sp. strain Y2 are capable of binding to the PstyA proximal PaaX binding site (Fig. 2).
![]() View larger version (56K): [in a new window] |
FIG. 4. Electrophoretic mobility shift assays of the STY probe with cell extracts from different Pseudomonas species. Lane 1, free STY probe; lane 2, cell extracts of Pseudomonas sp. strain Y2K1 ( paa1) (4.4 µg/µl); lane 3, cell extracts of Pseudomonas sp. strain Y2T2 ( paa2) (4.2 µg/µl); lane 4, cell extracts of Pseudomonas sp. strain Y2K1T2 ( paa1 paa2) (3.5 µg/µl); lane 5, cell extracts of P. putida KT2442 (2.3 µg/µl); lane 6, cell extracts of P. putida U (5.5 µg/µl); lane 7, cell extracts of Pseudomonas sp. strain Y2 (pVLTX1) (3.3 µg/µl).
|
![]() View larger version (26K): [in a new window] |
FIG. 5. Electrophoretic mobility shift assays of the STY probe with purified MBP-PaaX1 protein. (A). Lanes 1 to 7, retardation assays of the STY probe with 0, 5, 10, 25, 50, 100, and 150 nM MBP-PaaX1, respectively. (B). Lane 1, free STY probe. Lanes 2 to 7, retardation assays produced by 150 nM purified MBP-PaaX1 in the presence of 0, 25, 50, 100, 500, and 1,000 µM PA-CoA, respectively. Lane 8, retardation assay produced in the presence of 150 nM MBP-PaaX1 and 1 mM PA. Lane 9, retardation produced by 150 nM MBP-PaaX1 in the presence of 10 nM unlabeled STY probe.
|
![]() View larger version (34K): [in a new window] |
FIG. 6. DNase I footprinting analysis of the interaction of purified MBP-PaaX1 with the STY probe. Lanes 1 to 5 show footprints with 0, 25, 50, 150, and 300 nM purified MBP-PaaX1, respectively. Lane 6, A+G Maxam and Gilbert sequencing reaction. The nucleotide sequence of the protected region, complementary to that shown in Fig. 2 and 3, is shown within brackets.
|
![]() View larger version (22K): [in a new window] |
FIG. 7. Repression of in vitro transcription from PstyA promoter by MBP-PaaX1 and effect of the presence of PA-CoA. (A). Transcripts from pTE-E1B1 in the presence of phosphorylated StyR and different amounts of MBP-PaaX1. Lane 1 to lane 6, 0, 25, 75, 150, 300, and 600 nM MBP-PaaX1, respectively. Arrows point to the styA transcript (styA) and to the internal control transcript (RNA-1). (B). styA transcript levels (in arbitrary units) produced from pTE-E1B1 template in the presence of 0 to 600 nM purified MBP-PaaX1. The results are the normalized averages of six independent experiments. Error bars, standard errors. The inset shows the autoradiography of styA transcripts produced in the absence of MBP-PaaX1 (lane 1), in the presence of 600 nM MBP-PaaX1 (lane 2), and in the presence of 600 nM MBP-PaaX1 challenged with 1 mM PA-CoA (lane 3).
|
![]() View larger version (20K): [in a new window] |
FIG. 8. RT-PCR quantification of styA mRNA levels in different Pseudomonas and E. coli strains. The styA transcript level was determined in cultures of the indicated strains grown under either noninduced (gray bars) or styrene-induced (black bars) conditions as described in Materials and Methods. Bars represent the means of styA transcript levels from three independent experiments, each performed in duplicate. Error bars, standard errors.
|
PaaX2 is highly similar (86% identity) to PaaX1 and extracts expressing just PaaX2 can retard the STY DNA probe (Fig. 4, lane 2). Thus, it is probable that PaaX2 can act like PaaX1 to play a similar regulatory role at the PstyA promoter. Notably, as mentioned above, the lack of both PaaX1 and PaaX2 also results in comparatively high noninduced basal levels of transcription from PstyA (Fig. 8B). These results suggest that, in addition to modulating styrene-induced levels of transcription, PaaX1 and, by inference, PaaX2 may play an important regulatory role in maintaining tight regulation of PstyA in the absence of substrate for the pathway it regulates.
Concluding remarks. This work reveals a previously unsuspected role for a PaaX protein in regulating expression of sty genes involved in styrene catabolism. The existence of a PaaX-binding site at the PstyA promoter provides an additional level of transcriptional control that integrates transcription from the PstyA promoter, making it responsive to both initial styrene pathway substrate, through StySR, and the central intermediate PA-CoA produced by the paa genes, through the action of PaaX. Thus, this regulatory mechanism is likely to facilitate balanced and coordinated expression of the styrene upper (sty operon) and lower (paa genes) pathways and central metabolism. In this respect, it is interesting that inactivation of the paaX homologue of P. putida U (phaN) relieves the repression of the paa genes when this strain grows in the presence of glucose (30). The PstyA proximal PaaX-binding site identified here overlaps the very-low-affinity StyR-binding site (STY3) recently described in the sty operon of P. fluorescens ST (22). In the P. fluorescens ST system, StyR has been postulated to behave as a transcriptional repressor when it binds to STY3, and this binding is involved in the glucose-mediated repression of PstyA. In agreement with this, mutations in the STY3 operator region in P. fluorescens ST, which corresponds to the PaaX-binding site in Pseudomonas sp. strain Y2, partially alleviates the glucose-mediated repression of the PstyA promoter (22). While we cannot exclude the possibility that control of the sty genes in strains ST and Y2 might differ, our work offers an attractive alternative interpretation, namely, that PaaX binding, rather than StyR binding, to this region controls glucose-mediated catabolite repression of the PstyA promoter. Direct analysis of this putative role for the PaaX regulator is the subject of further research.
The work described here expands the known PaaX regulon to include the styABCD operon and supports the notion that PaaX, by sensing the PA-CoA, is a master regulatory protein in the PA-CoA catabolon that adjusts the expression of different operons to that of the paa-encoded central pathway (17). PaaX-mediated repression of the PstyA promoter acts in concert with the specific StyS-StyR regulatory system to provide a dual signal-responsive system that is functionally analogous to other genetic systems involved in the degradation of toxic compounds, such as the synergist effect of a pathway substrate and intermediate in benzoate catabolism (7, 8). In the case of styrene catabolism, the PaaX repressor would modulate StySR-induced transcription of the sty genes until the level of PA-CoA signals that the pathway can proceed. Conversely, as styrene is degraded and the StySR-mediated induction decreases, the PA-CoA signal would be anticipated to allow sufficient transcriptional activity to complete degradation of intermediates. In addition, this dual signal-responsive system is likely to ensure a quick transcriptional downshift of the sty catabolic genes under a number of conditions. These conditions include (i) whether styrene is not efficiently oxidized to PA and some toxic upper pathway intermediates, such as styrene oxide and/or phenylacetaldehyde, could accumulate within the cell and (ii) when other aromatic compounds, such as toluene and ethylbenzene, induce the StySR activator system (2) but are not enzymatically converted to PA.
|
|
|---|
This article has been cited by other articles:
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Copyright © 2009 by the American Society for Microbiology. For an alternate route to Journals.ASM.org, visit: http://intl-journals.asm.org | More Info»