Previous Article | Next Article ![]()
Journal of Bacteriology, October 2006, p. 6915-6923, Vol. 188, No. 19
0021-9193/06/$08.00+0 doi:10.1128/JB.00527-06
Copyright © 2006, American Society for Microbiology. All Rights Reserved.
Lehrstuhl für Microbiology, University of Regensburg, Universitätsstraße 31, D-93053 Regensburg,1 Institute for Botany, University of Munich, Menzinger Straße 68, D-80638 München, Germany2
Received 13 April 2006/ Accepted 18 July 2006
|
|
|---|
|
|
|---|
In the case of archaea we have only limited data for the mode of motility and for structural components of the motility organelles themselves. To the best of our knowledge, rotation of archaeal flagella as a mode of force generation has been reported only for Halobacterium salinarum and the so-called "square bacterium," recently described as Haloquadratum walsbyi or the SHOW (square haloarchaeum of Walsby) archaeon (1, 2, 10, 11, 33). Even for Methanococcus voltae, one of the few archaeal species which can be manipulated genetically (see reference 3 for a recent review) and which has been analyzed by K. Jarrell's group, rotation of flagella has not been proven yet (Jarrell, personal communication). In previous work with a focus on the ultrastructure of archaeal flagella workers reported distinct differences from bacterial flagella, especially with respect to diameter and helical structure (24, 49). In some cases the diameters of archaeal flagella were determined, and they ranged from 10 to 14 nm (Sulfolobus, 13 nm [49]; Metallosphaera, 13 nm [17]; Pyrodictium, 10 nm [38]; Ignicoccus, 14 nm [22; D. Müller, R. Rachel, and R. Wirth, unpublished]; Pyrococcus, 10 nm [49]; Methanococcus, 13 nm [27]; Archaeoglobus, 10 nm [Rachel, unpublished]; Halobacterium, 10 nm [13, 49]). There are no data on the ultrastructure in most cases; the first three-dimensional model with a resolution of ca. 2 nm was published recently for H. salinarum (13).
Archaeal and bacterial flagella differ in various respects (5, 6, 13, 27, 28, 46). Bacterial flagella form a helical tube with a diameter of ca. 20 nm and in most cases are composed of a single flagellin. In contrast, archaeal flagella are often composed of several flagellins, which in most cases are glycosylated. Bacterial flagella are synthesized via growth from the tip, while it is argued (but not proven) that polymerization of archaeal flagella occurs from the base. Anchoring of bacterial flagella is via a defined basal body containing "rings," whereas anchoring of the flagellar bundle in a so-called polar cap has been described only for H. salinarum (28). In bacteria >50 highly conserved genes which are regulated in a hierarchical fashion are needed for formation of functional flagella. In archaea 12 fla genes are known to be needed for synthesis of flagella, and no genes needed for anchoring structures, switching, or Mot proteins are known at the moment. The structural proteins comprising the motility organelles show similarities to type IV pili of bacteria at the N terminus. Interestingly, only 15 proteins seem to be necessary for formation of type IV pili in the bacterium Neisseria meningitidis (12). The statements above refer to the rule, but, as usual, there are some exceptions.
Pyrococcus furiosus is a long-known euryarchaeon (16) with the potential to serve as a model organism for hyperthermophiles. Its main advantages are rapid growth at 100°C (doubling time, 37 min), high cell yield (3 x 108 cells/ml), known genome sequence (40), and good characterization with respect to physiology and molecular biology, including transcription (47). Using a high-temperature light microscope (21) especially equipped with electrically heated objectives and slide holder, swimming of P. furiosus at 95°C was observed previously (H. Huber, personal communication; unpublished results). Transmission electron microscopic (TEM) studies showed the existence of up to 50 monopolarly inserted cell surface appendages called flagella (16). Direct proof that these filaments are used for swimming motility is currently not available, but this function is very probable, because Ultraturrax treatment abolishes swimming. Also, rotation of P. furiosus flagella has not been demonstrated yet. We studied these organelles with respect to composition, and here we describe new functions for them, including establishing cell-cell connections and acting as an adhesin on various surfaces.
|
|
|---|
Biochemical characterization of flagella. Protein samples were resolved by sodium dodecyl sulfate-polyacrylamide (12.5%) gel electrophoresis (SDS-PAGE), as described previously (30); proteins were stained with Coomassie brilliant blue G250 or were silver stained as described previously (9). Periodic acid-Schiff staining (56) was used for detection of protein glycosylation. N-terminal sequencing by Edman degradation was performed by the central protein analytic facility of the Biology Department of the University of Regensburg.
Adherence studies: growth on carbon-coated gold grids for TEM. Methods to study growth of microorganisms directly on carbon-coated gold grids used for TEM have been developed in our labs (39). Gold grids were placed in small Teflon holders in serum bottles containing anaerobic medium. For TEM cells were fixed with 2.5% (final concentration) glutaraldehyde for 30 min at room temperature. In the case of cell or flagellum suspensions, a drop was placed on a carbon-coated 200-mesh copper grid (Plano, Wetzlar, Germany). The samples were either unidirectionally shadowed with Pt/C at 15° (CFE 50; Cressington Ltd., Watford, United Kingdom) or negatively stained for 1 min with 2% uranyl acetate. All TEM micrographs were recorded using a slow-scan charge-coupled device camera (TEM 1000; TVIPS-Tietz, Gauting, Germany) attached to a CM 12 transmission electron microscope (FEI, Eindhoven, The Netherlands) operated at 120 keV.
Analyzing adherence to various surfaces using light microscopy. To analyze adherence to various surfaces using light microscopy, various particulate materials (maximum size, 10 by 10 by 1 mm) were added to serum bottles used for growth of P. furiosus. The following materials were tested: gold, nickel, and copper grids for TEM; stainless steel (V4A quality used for fermentors); household aluminum foil; Plexiglas, polycarbonate, polyvinyl chloride, and nylon (various labware consumables); enamel (coating of fermentors used for growth of P. furiosus); various types of glass; mica (glass substitute for light microscopy); and Si wafers (Infineon). Another solid material tested for adhesion was a sintered quartz material used for aquarium filters (ca. 1-mm-diameter particles of Substrat pro from Eheim, Deizisau, Germany, were obtained using a mortar and pestle). After overnight growth of P. furiosus the particles were removed using tweezers, and adhering cells were stained by use of the double-stranded DNA-specific fluorescence dye 4',6'-diamidino-2-phenylindole (DAPI). Detection was performed by using an Olympus BX50 fluorescence microscope; this approach allowed detection with nontransparent materials since the UV light used for detection was provided through the objective. The particulate materials used in adhesion studies could also be analyzed by scanning electron microscopy (SEM), as outlined below.
Analyzing adherence to solids using scanning electron microscopy. To analyze adherence to solids using scanning electron microscopy, sand grains from the beach of Porto di Levante, Italy, or other particulate materials were added to serum bottles instead of the gold grids used for TEM studies. After incubation, the solids with adhering cells were collected by sedimentation and fixed for at least 30 min in 0.1 M HEPES-buffered (pH 7) SME medium with 2.5% (final concentration) glutaraldehyde. After washing in double-distilled water and dehydration with a graded series of acetone solutions, cells were critical point dried from liquid CO2, mounted on stubs with conductive tabs (Plano, Wetzlar, Germany), and sputter coated (3 to 5 nm platinum) with a magnetron sputter coater (model SCD 050; BAL-TEC, Walluf, Germany). Specimens were examined with a Hitachi S-4100 field emission scanning electron microscope. SEM images were recorded with Digiscan hardware and were processed with the Digital micrograph 3.4.4 software (Gatan Digital Micrograph, Inc., Pleasanton, CA).
Characterization of cell-cell connections using freeze-etching. The methods used for freeze-etching experiments have been described previously (37). Cells from supernatants were harvested by centrifugation, loaded onto a gold carrier, and plunged into liquid nitrogen. The samples were cut with a cold knife (temperature, less than 185°C) in a freeze-etch unit (CFE-50; Cressington, Watford, United Kingdom) and then shadowed (1 nm Pt/C at 45°, 10 nm C at 90°), and the replicas were cleaned with 70% H2SO4.
Immunological methods. Flagella prepared by CsCl gradient centrifugation as described above were used to raise antibodies in rabbits, which were purified from serum by protein G affinity chromatography. The specificity of this antibody preparation was proven by reaction with crude cell lysates before and after shearing and with purified flagella (see Fig. S1 in the supplemental material) and by reaction with whole cells (see Fig. S2 in the supplemental material). Detection in the latter case was by use of a secondary gold-labeled antibody and TEM using established methods (52). For studies aimed at determining whether flagella were responsible for the establishment and maintenance of microcolonies growing on various surfaces, the particulate materials (maximum size, 10 by 10 by 1 mm) with adhering cells were incubated (at room temperature) with 2 ml of a 1:250 dilution (in sterile medium) of the purified antibodies. After 90 min of treatment the particles were removed with tweezers, placed into 2 ml of sterile medium, and incubated for 5 min; cells were detected by DAPI staining as described above.
|
|
|---|
![]() View larger version (163K): [in a new window] |
FIG. 1. Characterization of purified flagella. (A) Flagella prepared by shearing and purified by CsCl gradient centrifugation were analyzed by SDS-PAGE. Coomassie brilliant blue G250 staining indicated that the filament consists of >95% of one protein (lane 2); periodic acid-Schiff staining revealed that this flagellin is glycosylated (lane 3). Lane 1 contained a protein size standard; molecular masses of 66, 56, 43, 34, 27, and 20 kDa are indicated on the left. (B) TEM analysis proved the identity of the flagellum preparation.
|
Flagella of P. furiosus enable the cells to adhere to carbon-coated gold grids and to form cell-cell connections. During our attempts to develop techniques to study the three-dimensional structure of P. furiosus flagella via tomography, we realized that P. furiosus cells adhered to carbon films supported by gold grids, like those used for TEM. Following incubation in liquid growth medium, microscopic studies of such grids indicated that cells grew in the form of small colonies (Fig. 2A). Nearly all cells of these preparations had tufts of flagella (Fig. 2B), compared to cells freely floating in the medium and later prepared for TEM, where only about 50% of the cells had flagella. SEM studies indicated that the cells adhered to the solid support by means of their flagella (see below).
![]() View larger version (92K): [in a new window] |
FIG. 2. Growth of P. furiosus on carbon-coated gold grids for TEM. (A) Low-magnification TEM micrograph of a single P. furiosus colony. (B) Approximately 5% of the cells were connected by aggregated flagella.
|
![]() View larger version (142K): [in a new window] |
FIG. 3. Transmission electron micrographs of freeze-etched P. furiosus cell-cell connections. (A) Two cells connected by cable-like structures composed of parallel flagella. Bar = 1 µm. (B) "Cable" connecting two cells at higher magnification. Bar = 100 nm. (C) Freeze fracturing, resulting in breakage of the cables across the long axis. The highly ordered structure of the cables is evident. Bar = 100 nm.
|
![]() View larger version (165K): [in a new window] |
FIG. 4. Growth of P. furiosus on the surface of sand grains from its natural habitat, visualized by scanning electron microscopy. (A) Low-magnification scanning electron micrograph. Bar = 5 µm. (B) Higher magnification. Flagella attach the cells of the microcolony to the sand grain and to each other. Bar = 2 µm.
|
![]() View larger version (167K): [in a new window] |
FIG. 5. Growth of P. furiosus on the surface of sintered quartz, visualized by scanning electron microscopy. (A) Low-magnification scanning electron micrograph. Bar = 5 µm. (B) Higher magnification, demonstrating that flagella are used to attach the cells of the microcolony to the quartz surface and to each other. Bar = 2 µm.
|
![]() View larger version (117K): [in a new window] |
FIG. 6. P. furiosus adheres to various surfaces via flagella. (A) P. furiosus cells adhere to gold grids (detection via DAPI staining). Bar = 10 µm. (B) After addition of antibodies against P. furiosus flagella, no adhering cells are observed on gold grids (detection via DAPI staining). Bar = 10 µm. (C) Addition of antibodies against P. furiosus RNA polymerase does not remove adhering cells from gold grids (detection via phase-contrast microscopy). Bar = 10 µm. (D) P. furiosus adheres very well to polycarbonate (detection via DAPI staining). Bar = 10 µm. (E) P. furiosus adheres to Si wafers and grows on these wafers in the form of microcolonies (detection via DAPI staining). Bar = 10 µm. (F) Microcolony of P. furiosus growing on Si wafer (detection via SEM). Bar = 2 µm.
|
|
|
|---|
Biochemical analyses of flagella. Using slight modifications of established procedures for isolating archaeal flagella (25), we obtained a preparation which according to TEM and SDS-PAGE data contained pure flagella. We have shown that this cell surface appendage consists of >95% of one flagellin, which is rather unusual for archaea (46). The apparent molecular mass, ca. 30 kDa, does agree well with a previous report (50) on the existence of two flagellins (32 and 32.5 kDa) in the P. furiosus cell surface appendages. The discrepancy with respect to the number of flagellins reported here and previously (one flagellin versus two flagellins) cannot be resolved easily; the genome data (40) indicate that there are two flagellin genes encoding proteins with molecular masses of ca. 21 kDa (PF0338) and 29 kDa (PF0337). Unfortunately, both of these genes originally were referred to as flab. To differentiate between them, we named PF0338 (genome nucleotides 352341 to 351751) flaB1 and PF0337 (genome nucleotides 351738 to 350947) flaB2. The N terminus of the ca. 30-kDa protein identified here was determined to be AVGIGTLIVFIA, demonstrating that FlaB2 constituted the long filaments in our cultures. The genome data indeed predict that the second amino acid in mature FlaB2 is isoleucine instead of valine; therefore, we resequenced this part of the genome twice and confirmed the occurrence of valine at this position. It is not known if the original genome sequence in this region is not correct or if the strain of P. furiosus that we are used differs in this respect from the strain originally sequenced (40) by 1 bp; in either case this is only a minor difference because of the conservative nature of this amino acid substitution (isoleucine to valine). We have no evidence that significant amounts of the 21-kDa protein FlaB1 are present in the filaments. It is not known if FlaB1 is a minor flagellin located at the base of the organelle, as has been reported for flagellin FlaB3 of M. voltae (5). Our data (see Fig. S1 in the supplemental material) showing that an antiserum raised against sheared flagella reacted weakly with a ca. 27-kDa protein on whole unsheared cells (but not with purified flagella) might be considered support for this possibility. In addition, it should be noted that very probably the published genome sequence for the region coding for the potential N terminus of FlaB1 is not correct. An AVGIGTLIVFIA amino acid motif is directly upstream of the predicted N terminus (MLVAAVAA). The AVGIGTLIVFIA motif is present in all other Pyrococcus flagellins, which could be taken as evidence that the original annotation is not correct. The genome sequence does not contain a start codon in front of the AVGIGTLIVFIA motif but rather contains multiple stop codons in all three reading frames. Furthermore, our preliminary data indicate that there are rather large differences between the published genome sequence and the genome sequence of our strain, which will be clarified in further experiments.
Our finding that P. furiosus FlaB2 is glycosylated is in line with other reports, because such a modification seems to be more the rule than the exception for archaeal flagellins (46), and it is corroborated by our data showing that the apparent molecular mass of the protein is somewhat larger than the predicted molecular mass. At present, we have no data concerning the chemical nature of the glycosylation; we plan to determine this in a separate project because "structural characterization of glycoproteins is a time-consuming and challenging process especially in cases where only limited amounts of protein can be recovered form biological samples" (51).
Our biochemical data for the heat stability, structural integrity, and detergent sensitivity of the flagella are in good agreement with the natural habitat of P. furiosus, marine water (without detergents) at temperatures around 100°C.
Formation of cell-cell connections. During our experiments to determine under which growth conditions maximum flagellation is observed, we realized that some cells in stationary phase had very unusual structures, namely cell-cell connections. These cell-cell connections could be visualized with a fluorescence light microscope by staining cells with fluorescence dyes (data not shown); the use of electron microscope techniques allowed detailed analyses. These experiments indicated that up to 5% of all cells in stationary phase were connected via cable-like structures. The structures were composed of flagella, as indicated by their occasional dissociation into single filaments. Formation of "cables" rarely was observed in exponential growth phase. Our antiserum raised against purified flagella reacted with dissociated single flagella but not with the cables. This can be explained by our finding that the cables are covered by some material whose chemical composition is not known.
An obvious question arises: why does P. furiosus form these cell-cell connections? At the moment we do not have a definite answer; a possible explanation is that the connections are a prerequisite for allowing gene transfer between P. furiosus cells. It can be argued that gene transfer takes place between P. furiosus cells and also with other species, although this has not been proven so far. Such potential gene transfer is supported by the fact that a 16-kb DNA region differing by only 151 point mutations has been identified in P. furiosus and Thermococcus litoralis (14). In P. furiosus this DNA region is flanked by identical IS elements with direct and inverted repeats, implying that it is a mobile DNA element. For P. furiosus no plasmids which might be naturally transferred between different strains have been described so far; this is in contrast to other species of Pyrococcus for which plasmids have been reported (e.g., pGT5 in Pyrococcus abyssi [32], pGE27 in P. abyssi [7], and pRT1 in Pyrococcus sp. strain JT1 [53]). On the other hand, it has been shown that at least two shuttle vectors are maintained stably in P. furiosus (4). Very recently, a comparative analysis of the genomes of P. furiosus and Pyrococcus woesei provided evidence that P. furiosus acquired more than 100 open reading frames from other organisms by lateral gene transfer (20).
Taken together, these data suggest that P. furiosus should have the capacity for gene transfer; the formation of cell-cell connections might be the structural prerequisite for such a transfer. It should be noted in this context that we did observe various lengths (>2 µm to <0.2 µm) of cable-like connections. An attractive hypothesis is that the first cell-cell contact is established by formation of the cables, which is followed by shortening of the cables that results in pairs of cells close enough to allow direct gene transfer.
The cell-cell connections that we observed here for P. furiosus do not resemble those reported previously for Haloferax (previously Halobacterium) volcanii (41). In the latter organism cytoplasmic bridges (up to 2 µm long and 0.1 µm in diameter) have been reported to support exchange of chromosomal DNA but not of immobile plasmids. It was argued that these bridges were made of the regular H. volcanii membrane and cellular envelope and that they maintain cytoplasmic continuity between the two connected cells. It was concluded that the cytoplasm of H. volcanii did not mix and that the cytoplasmic continuity should be restricted to the movement of certain molecules. In the case of P. furiosus it is very clear that no cytoplasmic bridges connect cells; rather, cables consisting of aggregated flagella connect cells. Clearly, the formation of cell fusions in the newly described species Thermococcus coalescens (29) also does not resemble the interactions that we observed here for P. furiosus.
Adhesion to solid surfaces. In addition to cell-cell connections which are formed by aggregation of many flagella into cable-like structures, P. furiosus cells can adhere to solid surfaces by means of single flagella. We are not aware of any report that a motility organelle of an archaeon can also function as an adhesin. In bacteria, flagella originally were not suspected to have a function other than generating force for motion of the cells; this picture has to been modified. Recently, adhesion to surfaces via flagella has been reported for a variety of bacteria, especially pathogenic bacteria. For example, it was not until 2002 that it was realized that certain strains of the model bacterium E. coli can adhere to epithelial cells via their flagella (18). Further examples of adhesion of bacteria to surfaces via flagella were reviewed by Jonson et al. (26).
The adhesion of P. furiosus to surfaces is specific, because the cells do not interact in similar ways with all surfaces. Initial experiments in which adhesion to different materials was tested revealed that P. furiosus does not form colonies on glass surfaces; only a few single cells were observed very rarely on glass surfaces (data not shown). We did test if P. furiosus could adhere to a variety of other surfaces which are not related to the natural habitat of the archaeon (e.g., sand grains) or to growth under laboratory conditions (e.g., glass for serum bottles and enamel used as a coating of our fermentors for mass cultivation). Such surfaces, including metals and plastics, were also selected based on potential biotechnological applications; the results of these studies are summarized in Table 1. A few examples are shown in Fig. 6, which also provides the final proof that adhesion was via flagella: addition of antibodies against purified flagella "dissolved" the preformed aggregates (compare Fig. 6B with Fig. 6A), while antibodies against a cytoplasmic component (RNA polymerase) of P. furiosus had no effect (Fig. 6C). From this we concluded that adhesion is not an "all or nothing" effect but rather is "dynamic"; flagella coming free from surfaces are coated by the antibodies, finally resulting in dissolution of aggregates.
|
View this table: [in a new window] |
TABLE 1. Adherence of P. furiosus to various surfaces
|
From the data presented above we concluded that flagella of P. furiosus enable this archaeon to form cell-cell connections and to adhere to solid surfaces. This raises the question whether the filaments (which have diameters of 9 to 10 nm and are up to 7 µm long) are correctly named flagella, which indicates that they are used for swimming motility. Our biochemical analyses have clearly shown that these flagella are composed mainly of one protein which is homologous to other archaeal flagellins, and therefore designation of the cell surface appendages as flagella seems reasonable. On the other hand, as discussed above, a direct correlation of archaeal flagella with motility has been obtained for very few species. Archaeal flagellins show some homology to type IV pili of bacteria in the N-terminal region (6), and the latter bacterial cell surface organelles combine two functions, namely adhesion and motility. Type IV pili bind at the tip to surfaces and are retracted rapidly, resulting in the so-called twitching motility of bacteria. In the case of P. furiosus we show here that the flagella are used for adhesion; a challenging task for future investigations will be to understand the motility mechanism of this archaeon.
We thank S. Naji and M. Thomm for the gift of anti-RNA polymerase antibodies and S. Dobner for expert technical help. The helpful comments of the anonymous referees are gratefully acknowledged.
Supplemental material for this article may be found at http://jb.asm.org/. ![]()
|
|
|---|
-helices. J. Mol. Biol. 249:88-110.[CrossRef][Medline]This article has been cited by other articles:
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Copyright © 2009 by the American Society for Microbiology. For an alternate route to Journals.ASM.org, visit: http://intl-journals.asm.org | More Info»