Previous Article | Next Article ![]()
Journal of Bacteriology, December 2006, p. 8452-8459, Vol. 188, No. 24
0021-9193/06/$08.00+0 doi:10.1128/JB.01321-06
Copyright © 2006, American Society for Microbiology. All Rights Reserved.
Department of Environmental Microbiology, HZI-Helmholtz Centre for Infection Research, Braunschweig, Germany,1 Institute of Microbiology, Technical University of Braunschweig, Germany,2 CSIC, Institute of Catalysis, Cantoblanco, Madrid, Spain,3 Institut für Molekulare Mikrobiologie und Biotechnologie, Westfälische Wilhelms Universität, Münster, Germany4
Received 20 August 2006/ Accepted 11 September 2006
|
|
|---|
|
|
|---|
In this study, we identify and describe a new "tesB-like" gene of A. borkumensis that encodes a novel hydroxyacyl-coenzyme A (CoA)-specific thioesterase. Acyl-CoA thioesterases that hydrolyze acyl-CoA molecules have thus far been studied mainly in Escherichia coli, which possesses two of such enzymes: (i) thioesterase I, encoded by the tesA gene, cleaves C12 to C18 acyl-CoA molecules (4), and (ii) thioesterase II, encoded by the tesB gene, acts on C6-C18 acyl-CoA thioesters as well as on C12-C18 3-hydroxyacyl-CoA thioesters (3). Little is known about the exact physiological role of the TesB protein in bacterial metabolism except that it releases free fatty acids and also, at least in one case, hydroxylated fatty acids from the corresponding CoA-activated forms, thus producing free 3-hydroxyalkanoic acids (3-HAA) (27). CoA-activated hydroxylated fatty acids in turn are cellular precursor intermediates for the synthesis of polyhydroxyalkanoates (PHA), well-known bacterial storage compounds, which usually are produced as insoluble intracellular granules by many microorganisms during times of carbon surfeit (24), and they have long been explored as a renewable resource for biodegradable thermoplastics and biopolymers (2, 18, 24). We describe here that a disruption of the tesB-like gene of A. borkumensis by a mini-Tn5 transposon causes hyperproduction and extracellular deposition of medium-chain-length PHA when grown on alkanes. Since commercial exploitation of the biological production of PHA has thus far been hampered by the need for the costly recovery of intracellularly stored granules from whole cells (13), the present mutant allows this costly recovery step to be circumvented, as large amounts of PHA can easily be obtained from culture medium.
|
|
|---|
(Invitrogen, Carlsbad, CA) and RosettaBlue DE3 (Novagen, Madison, Wisconsin), which were used for cloning and expression studies, were grown at 37°C in Luria-Bertani medium supplemented with kanamycin (50 µg/ml) or streptomycin (50 µg/ml) and/or chloramphenicol (34 µg/ml) where appropriate.
Construction of an A. borkumensis SK2 mini-Tn5 transposon library.
Transposon mutagenesis was based on the mini-Tn5 Str/Sp element constructed as described previously by de Lorenzo et al. (7). A. borkumensis SK2 was grown at 30°C on ONR7a medium until the stationary phase of growth, and cells were centrifuged at 3,200 x g at 4°C. Donor strain E. coli (CC118
pir) cultures and helper (HB101
pir) cultures of E. coli were grown overnight at 37°C on LB medium with either streptomycin or chloramphenicol, respectively, washed with fresh LB, and centrifuged at 3,200 x g at 4°C. The pellets of A. borkumensis and E. coli donor and helper strains were mixed in proportion (4:1:1 [by volume]) and placed onto a membrane filter on a plate with LB agar and salts (0.45 g/liter Na2HPO4 · 2H2O, 2.5 g/liter NaNO3, 11.5 g/liter NaCl, 0.38 g/liter KCl, 0.7 g/liter CaCl2 · 2H2O) and 2% (wt/vol) pyruvate as a carbon and energy source. The plate was incubated for 24 h at 30°C. The cells were then washed with 10 mM MgSO4, and transconjugants were selected on ONR7a medium with 0.5% (wt/vol) pyruvate and 0.5% (wt/vol) acetate as carbon sources and nalidixic acid (10 µg/ml) and streptomycin as antibiotics as required.
Inverse PCR. The mini-Tn5 insertion sites of the selected mini-Tn5 mutants were determined by inverse PCR as described previously (15). Briefly, total DNA of the mutant was isolated and digested with ClaI, which does not cut within the mini-Tn5 element. The resulting DNA fragments were circularized with DNA T4 ligase, and the flanking regions of the inserted mini-Tn5 were amplified with two primers corresponding to the O and I ends of the Tn5 transposon (GGC CGC ACT TGT GTA TAA GAG TCA G and GCG GCC AGA TCT GAT CAA GAG ACA G, respectively). The conditions for the PCR were as follows: 94°C for 1.5 min, 48°C for 1 min, and 70°C for 4 min for 30 cycles. The PCR products were gel purified and used for automatic DNA sequencing with BigDye terminators on an ABI Prism 377 sequencer (AP Biosystems). To determine the precise site of transposon insertion, additional primers have been designed to read the flanking regions of the disrupted gene, i.e., primers 1086 (TTA CTG GCT TCG CAG GAA TGG) and intSM160 (CTT GGC ACC CAG CAT GCG CGA GCA GG).
RT-PCR. To determine whether the two genes ABO_1111 and ABO_1112 constitute an operon, reverse transcription (RT)-PCR was performed on DNase I-treated total RNA extracted with a Fast Blue RNA isolation kit (Qbiogene, Heidelberg, Germany) from a 10-ml culture of SK2 grown to early stationary phase (optical density at 600 nm of 1.0) on either 2% (wt/vol) pyruvate or 1.5% (wt/vol) octadecane. Primers used were Oligo I (TAT GGT CAA AGT CAG GCG GTG) and Oligo II (CAC ATC CAA GCG CAA AGA CTG), which are specific for a 311-bp region spanning the 3' end of ABO_1111 and the 5' end of ABO_1112 (21). The same primers were also used for RT-PCR with RNA isolated from the C9 tesB-like::Tn5 mutant in order to determine whether the mini-Tn5 mutation had a polar effect on the transcription of the downstream gene(s). RT-PCR was performed using the SuperScript first-strand synthesis system for RT-PCR (Invitrogen) according to the instructions of the supplier. Briefly, the reaction mixture, consisting of 2 µl of template RNA, 1 µl of a 10 mM deoxynucleoside triphosphate mix, 1 µl of 2 µM primer Oligo II, and 6 µl of diethylpyrocarbonate-treated water, was incubated at 65°C for 5 min; placed on ice; mixed with a solution consisting of 2 µl 10x RT buffer, 4 µl of 25 mM MgCl2, 2 µl of 0.1 M dithiothreitol, and 1 µl of RNaseOUT recombinant RNase inhibitor; and incubated further at 42°C for 2 min, and 1 µl (50 units) of SuperScript II RT was then added to each tube (except the RT control tubes), and incubation continued at 42°C for 50 min. The RT reaction was then stopped by raising the temperature to 70°C for 15 min. One µl of RNase H was then added, and the mixture was incubated for 20 min at 37°C. Subsequent PCR amplification was performed under standard conditions, and the RT-PCR products were separated by electrophoresis on a 1.8% (wt/vol) agarose gel.
PHA isolation and analysis of its monomer composition. Bacteria were cultured in ONR7a medium with either 2% (wt/vol) pyruvate or 1.5% (wt/vol) octadecane as a carbon source on a rotary shaker (100 rpm) at 30°C until the late stationary phase of growth. Cell pellets and supernatant fluids of the wild type were separated by centrifugation (60 min at 12,000 x g). As C9 mutant cells could not be entirely separated from the culture media by centrifugation, total cell cultures of both the wild type and the C9 mutant were also included in the chemical analysis. The cell pellets, supernatants, or total cell cultures were lyophilized, rinsed with ice-cold water, dried again overnight at 80°C, and stored at room temperature until use. To quantify PHA, the polyesters were extracted from accurately weighed freeze-dried samples by Soxhlet extraction with hot chloroform (95°C) as described previously by Cromwick et al. (6). Briefly, chloroform extracts were filtered through Whatman paper to remove cell debris and then concentrated and added to cold methanol to precipitate PHA. The precipitated PHA was washed with methanol, dried, and subjected to gel filtration to select only those cell polymers with molecular masses higher than 100,000 Da, thus eliminating any contamination of the samples by glucolipids or free 3-HAA, which are also potentially produced under these conditions. To determine the polyester content and composition, 2 mg of purified PHA was incubated with a mixture of chloroform-methanol-sulfuric acid (1:0.85:0.15 [by volume]) for 2 h at 100°C to degrade PHA to its constituent, 3-hydroxycarboxylic acid methyl esters (FAMEs), by methanolysis. Distilled water (0.5 ml) was then added, tubes were shaken for 1 min, and the phases were then allowed to separate. The organic phase was transferred into a vial, and the FAMEs were analyzed using a gas chromatograph-mass spectrometer (gas chromatograph model Varian 3400CX [Varian Chromatography Systems, Sugar Land, TX] and a VG Autospec spectrometer) equipped with a 30-m by 0.25-mm HP-5 (5% diphenyl and 95% dimethylpolysiloxane)-fused silica capillary column with a flow rate of 1 ml/min (with helium as the carrier gas), a sample input temperature to 230°C at a rate of 8°C/min, an interface temperature of 250°C, an ion source temperature of 175°C, the electron impact mode at 70 eV, and scanning from 45 to 450 atomic mass units at 0.5 s/scan. The degree of purity of the PHA samples used for analysis was about 99.5%, as no additional peaks on gas chromatograms were observed (Fig. 1). Molecular weights were determined by gel permeation chromatography using a Spectra Physics gel permeation chromatograph under the following conditions: 50°C column temperature; isocratic gradient; tetrahydrofuran mobile phase, 1.0-ml/min flow rate, and light-scattering detector.
![]() View larger version (17K): [in a new window] |
FIG. 1. Gas chromatograms of polyesters produced by Alcanivorax borkumensis SK2 and mutant strain C9 under different culture conditions. MHC4, monohydroxybutyric acid; MHC5, monohydroxypentanoic acid; MHC8, monohydroxyoctanoic acid; MHC10, monohydroxydecanoic acid; MHC12, monohydroxydodecanoic acid.
|
cells (Invitrogen), selecting for transformants on LB medium containing streptomycin (50 µg/ml). The clones obtained were checked for the correct orientation of the cloned gene, positive plasmid constructs were then transformed into RosettaBlue DE3 competent cell, and transformants were selected on streptomycin (50 µg/ml) and chloramphenicol (34 µg/ml). For expression and purification of the enzyme, cultures of E. coli RosettaBlue DE3, harboring the tesB-like gene in the expression vector, were diluted 1:10 and grown overnight at 37°C in LB liquid medium containing appropriate antibiotics until an absorbance at 600 nm of 1.0 was reached. At that point, overexpression was induced by the addition of 1.0 mM isopropyl thio-ß-D-galactoside (IPTG), and after 6 h of growth, cells were harvested, washed with buffer A (50 mM potassium phosphate buffer, pH 8.0, 10 mM EDTA), and stored at 4°C until use. Approximately 0.5 g (wet weight) of E. coli cells expressing or not expressing the tesB-like gene was suspended in 1 ml of buffer A supplemented with 200 µg of phenylmethylsulfonyl fluoride, 5 µg DNase I grade II, and 1 µg lysozyme per ml, and cells were then disrupted by sonification for a total of 4 min (30-s pulses and 1-min pauses) at 4°C in a W250 sonifier (Branson Schallkraft GmbH, Germany). Soluble cell fractions were obtained as supernatants after 30 min of centrifugation at 15,000 x g at 4°C. The resulting supernatants were tested for thioesterase activity (see below). The total protein concentration was determined by the Bradford method using bovine serum albumin as a standard (5). Thioesterase assay. The hydrolysis of acyl-CoAs and hydroxyacyl-CoAs by E. coli cell extracts containing or not containing the TesB-like enzyme was determined using a 5,5-dithio-bis(2-nitrobenzoic acid) (DTNB)-based assay, as described elsewhere previously (28). Briefly, reactions for DTNB-based test were carried out in buffer A, and 5-thio-2-nitrobenzoate, produced from DTNB reacting with CoA released by hydrolysis from the acyl-CoA substrate, was monitored through its absorbance at 412 nm (molar extinction coefficient of 13,600 M1). A 1-ml reaction mixture contained 4 µM acyl-CoAs or hydroxyacyl-CoA (chain length in each case ranging from acetyl to decanoyl), 1 mM DTNB, and 100 µl of crude cell extract containing 25 µg of total protein (obtained as described above) in a quartz cuvette with a 1-cm light path length. One unit of enzymatic activity was defined as the amount of protein releasing 1 µmol of CoA per min. (R,S)-3-Hydroxyacyl-CoAs (from 3-hydroxyhexadecyl-CoA to 3-hydroxydecanoyl-CoA) were synthesized as described previously by Rehm et al. (19). (R,S)-3-Acyl-CoAs were obtained from Sigma Chemical Co. (St. Louis, Missouri). Quantification of the hydrolysis of hydroxyacyl-CoAs by extracts from A. borkumensis wild-type strain SK2 and the C9 mutant was performed essentially as described above by using protein extracts of A. borkumensis cells cultured in ONR7a medium with either 2% (wt/vol) pyruvate or 1.5% (wt/vol) octadecane as a carbon source on a rotary shaker (100 rpm) at 30°C until the late stationary phase of growth (conditions for disruption were the same as those for E. coli cells).
Electron microscopy. For scanning electron microscopy, cells were grown on Permanox slides (Nalge Nunc) in ONR7a medium containing 1.5% (wt/vol) octadecane (slides covered with octadecane), or 2% (wt/vol) pyruvate, and 0.27 g/liter NH4Cl in liquid culture, and cells were harvested in their stationary phase of growth. Scanning electron microscopy was prepared and carried out as described previously (14).
|
|
|---|
Chemical analysis of cell contents from wild-type A. borkumensis SK2 grown under conditions of C excess by gas chromatography-mass spectrometry revealed that A. borkumensis produces either medium-chain-length PHA, consisting of 3-hydroxyacyl monomers of 6 to 12 carbon units, or polyhydroxybutyrate (PHB) (four carbon units), depending on the carbon source used for growth (Fig. 1 and Table 1). The composition of the polymer produced on alkanes corresponds well to the respective PHA monomer composition typical for Pseudomonas species (25). The mean molecular mass of the polymer as determined by gel permeation chromatography was found to be around 280 kDa under both growth conditions tested (Table 1). However, although the amount of PHA produced from alkane (i.e., under conditions of a high C/N ratio) was three times higher (18 mg/liter) than the amount of PHB produced during growth on pyruvate (6.5 mg/liter), such rather low concentrations in absolute terms are far below the amounts typically found for intracellular storage polymers in PHA- or PHB-storing bacteria (up to 1.6 g/liter). The chemical analysis was also confirmed by nuclear magnetic resonance (data not shown). We conclude that while A. borkumensis clearly has the genetic equipment to synthesize PHA and PHB polyesters, the wild type does so by producing only small amounts, suggesting that neither PHB nor PHA is likely to be a major storage compound in this bacterium, which instead probably employs other types of storage compounds to serve as carbon/energy source storage during periods of carbon/energy limitation.
|
View this table: [in a new window] |
TABLE 1. PHA production in SK2 wild-type and C9 mutant strains grown on different carbon sources
|
![]() View larger version (191K): [in a new window] |
FIG. 2. Scanning electron micrograph images of A. borkumensis SK2 wild-type and C9 mutant cells. Shown are SK2 wild-type (a and c) and C9 mutant (b and d) cells grown on Permanox slides covered with octadecane in ONR7a medium containing 1.5% (wt/vol) octadecane and 0.27 g/liter of NH4Cl featuring either the external, medium-exposed side of the biofilm (a and b) or the internal side of it, adjacent to the slide (c and d).
|
![]() View larger version (17K): [in a new window] |
FIG. 3. RT-PCR analysis of DNase I-treated RNA extracted from A. borkumensis SK2 and a tesB-like acyl-CoA thioesterase mutant from a 10-ml culture of SK2 grown to stationary phase (optical density at 600 nm of 1.0) on either 2% (wt/vol) pyruvate or 1.5% (wt/vol) octadecane. Primers used were Oligo I and Oligo II, specific for a 311-bp region spanning the 3' end of ABO_1111 and the 5' end of ABO_1112. (A) Organization of the operon and adjacent genes, location of the primers used, and predicted size of the RT-PCR product. WT, wild type. (B) RT-PCR products were obtained from total RNA extracted from SK2 and mutant C9 using primers Oligo I and Oligo II. Lanes: 1, 1-kb marker, 2, SK2 on pyruvate; 4, SK2 on octadecane; 6, C9 on pyruvate; 8, C9 on octadecane. Lanes 3, 5, 7, 9 are corresponding negative controls (without reverse transcriptase).
|
![]() View larger version (7K): [in a new window] |
FIG. 4. Enzymatical hydrolysis of (R,S)-3-hydroxyacyl-CoAs (a) and acyl-CoAs (b) by crude extracts of E. coli harboring only vector pCDF as the control ( ) or the recombinant insertion construct pCDF::tesB-like (). Data given are means with standard deviations of three independent culture samples and three independent assays. The specific activity of the crude extract of E. coli harboring only vector pCDF was lower than 0.025 U/mg for all substrates tested, which is in the range of previously published data.
|
![]() View larger version (6K): [in a new window] |
FIG. 5. Enzyme hydrolysis of (R,S)-3-hydroxyacyl-CoAs by wild-type A. borkumensis (WT) and its C9 mutant. 3-Hydroxy-dodecanoyl-CoA was the substrate for enzyme determinations. The assay was performed as described in Materials and Methods, using 100 µl of crude cell extracts containing 25 µg of total protein. Activity is shown as the amount of protein releasing 1 nmol of CoA per min. Values represent the averages of three determinations ± standard deviations.
|
![]() View larger version (15K): [in a new window] |
FIG. 6. Suggested pathway of PHA biosynthesis in A. borkumensis SK2 and mutant strain C9 grown on hydrocarbons. Hydrocarbons are degraded via terminal oxidation to produce free fatty acids, which are then activated by an acyl-CoA synthase and subjected to ß-oxidation. The (S)-3-OH-acyl-CoAs produced by ß-oxidation are isomerized into (R)-3-OH-acyl-CoAs by the action of an isomerase. (R)-3-OH-Acyl-CoAs produced during ß-oxidation are converted to either 3-HAA through the action of TesB-like acyl-CoA thioesterase or PHA through the action of PhaC synthase. The mutation in the TesB-like acyl-CoA thioesterase abolishes the production of free 3-HAA and channels (R)-3-OH-acyl-CoAs exclusively into PHA synthesis.
|
To conclude, we report here a new enzyme found in the marine oil-degrading bacterium A. borkumensis that specifically hydrolyzes hydroxylated acyl-CoA and that a mini-Tn5 mutation abolishing this 3-hydroxyacyl-CoA-specific thioesterase activity leads to the hyperproduction of extracellularly deposited PHA. This mutant's ability to deposit overproduced PHA extracellularly provides an interesting starting point for studying the biological mechanisms by which PHA is translocated into the culture medium, particularly with regard to contrasting reports on mutants of other organisms that store overproduced PHA exclusively intracellularly (16). Apart from gaining insights into biological mechanisms, our findings present a novel system to potentially generate high yields of biotechnologically important PHA, which can easily be recovered from the culture medium and thus which circumvents the need for costly procedures for the extraction of PHA granules from producer cells.
J.S.S. is grateful to S. Lang (Technical University of Braunschweig), who was the first to give us a hint that the extracellular polymer might be PHA. J.S.S. also thanks Angelika Arnscheidt for technical assistance.
Published ahead of print on 22 September 2006. ![]()
|
|
|---|
This article has been cited by other articles:
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Copyright © 2009 by the American Society for Microbiology. For an alternate route to Journals.ASM.org, visit: http://intl-journals.asm.org | More Info»