Previous Article | Next Article ![]()
Journal of Bacteriology, May 2006, p. 3391-3401, Vol. 188, No. 9
0021-9193/06/$08.00+0 doi:10.1128/JB.188.9.3391-3401.2006
Copyright © 2006, American Society for Microbiology. All Rights Reserved.
Institute of Molecular Biology and Genetics, Mahidol University, Salaya Campus, Nakornpathom 73170, Thailand,1 School of Biological Sciences, Nanyang Technological University, 60, Nanyang Drive, Singapore 6375512
Received 2 December 2005/ Accepted 23 January 2006
|
|
|---|
-endotoxin from Bacillus thuringiensis is toxic to larvae of Culex, Anopheles, and Aedes mosquitoes, which are vectors of important human tropical diseases. With the objective of designing modified toxins with improved potency that could be used as biopesticides, we determined the structure of this toxin in its functional form at a resolution of 2.8 Å. Like other Cry
-endotoxins, the activated Cry4Aa toxin consists of three globular domains, a seven-
-helix bundle responsible for pore formation (domain I) and the following two other domains having structural similarities with carbohydrate binding proteins: a ß-prism (domain II) and a plant lectin-like ß-sandwich (domain III). We also studied the effect on toxicity of amino acid substitutions and deletions in three loops located at the surface of the putative receptor binding domain II of Cry4Aa. Our results indicate that one loop is an important determinant of toxicity, presumably through attachment of Cry4Aa to the surface of mosquito cells. The availability of the Cry4Aa structure should guide further investigations aimed at the molecular basis of the target specificity and membrane insertion of Cry endotoxins. |
|
|---|
-endotoxins occur as protein crystals in sporulating B. thuringiensis subsp. israelensis. These crystals are produced as inactive protoxin inclusions, which dissolve upon ingestion by insect larvae under the alkaline conditions present in the midgut lumen (54). The soluble Cry protoxin is activated by larval midgut proteases, which remove the C-terminal half and approximately 30 residues from the N terminus. This yields an active and proteolytically resistant fragment which specifically binds to receptors on the brush border membrane of the insect midgut epithelium. Conformational changes subsequently allow the activated toxin to insert into the host cell membrane and form pores. This in turn leads to ion leakage, cell lysis, and insect death (54).
The crystal structures of the following Cry toxins have been reported previously: Cry3Aa (42), Cry3Bb (25), Cry1Aa (29), Cry1Ac (41), Cry2Aa (46), and Cry4Ba (7). These toxins exhibit markedly different insect specificities in spite of their similar organizations into three structurally conserved domains. N-terminal domain I, an amphipathic
-helical bundle, is responsible for membrane insertion and pore formation (26, 50a, 63, 65). Domain II is composed of antiparallel ß-strands connected by loops that vary significantly in length and amino acid sequence in different toxins. These loops are therefore thought to participate in receptor binding and hence in determining the specificity of the toxin for insect larvae (5, 35, 51, 57). C-terminal domain III, a sandwich of two antiparallel ß-sheets, is believed to protect the structural integrity of active toxin molecules against further proteolytic cleavage and to promote target membrane permeabilization (45), and it could also participate in receptor recognition (11, 39). Nevertheless, the precise sequence of events that follow receptor binding by the active toxin, leading to membrane insertion and cell lysis, remains poorly defined. Extensive conformational changes of the toxin architecture are likely to be involved, possibly leading to assembly of an oligomeric toxin structure.
Among the Cry toxins, the Cry4Aa and Cry4Ba toxins are the most closely related molecules, exhibiting 35% amino acid sequence identity (13, 66) (Fig. 1). Despite their similarity, however, these toxins exhibit different levels of toxicity against various mosquito species. While Cry4Ba is highly toxic to Aedes and Anopheles larvae (vectors of dengue and yellow fever viruses and of malaria, respectively), it exhibits very little activity against Culex larvae (vector of West Nile and Japanese encephalitis viruses) (49). By contrast, Cry4Aa toxin exhibits a high level of toxicity against Culex and Aedes larvae and is slightly less toxic to Anopheles larvae (49). In addition, Cry4Aa and Cry4Ba show synergism in vivo against larvae of all three mosquito genera (2, 49). Because their interacting binding partners at the insect membrane surface are not known, the molecular basis that determines the specificity of these toxins has remained elusive. Recently, the X-ray crystal structure of the B. thuringiensis subsp. israelensis Cry4Ba toxin was published, but the 50 N-terminal residues (corresponding to helices
1 and
2) were not visible in the electron density map, presumably because of proteolysis that occurred during crystallization (7). Here we report the crystal structure of the active Cry4Aa single mutant R235Q at a resolution of 2.8 Å. Below we discuss possible mechanisms of membrane pore formation and also the structural determinants for the specificity of B. thuringiensis subsp. israelensis Cry toxin in light of site-directed mutagenesis data. Our results provide the first complete view of the three-dimensional structure of a dipteran-specific toxin and underline the importance of loop 2 of domain II for Cry4Aa toxicity.
![]() View larger version (50K): [in a new window] |
FIG. 1. (A) Schematic representation of the three domains present in the mature Cry4Aa toxin. Amino acids 68 to 679 are visible in the final electron density map. The R235Q mutation, which makes the toxin resistant to further proteolysis, is also indicated. (B) Alignment of the amino acid sequences of the homologous dipteran-specific toxins Cry4Aa and Cry4Ba. Secondary structure elements of Cry4Aa, as determined in this work (using the Pymol program [16]), are indicated above the sequence; helices are indicated by rectangles, and ß strands are indicated by arrows. 8a is a short 310 helical segment. Residue numbers of both toxins are indicated.
|
|
|
|---|
Data collection, model building, refinement, and analysis. Synchrotron data collection and molecular replacement calculations using the Cry4Ba structure as a search model (PDB code 1W99) have been reported previously (6). Model building was done using the O program (34) interspersed with cycles of electron density map improvement as described previously (6). Several cycles of molecular dynamics with a slow cooling protocol using CNS (10) were carried out. The DALI program (30) was used to search for similar three-dimensional structures in the PDB and to perform a structural comparison with Cry4Ba toxin. An alignment of the amino acid sequences of Cry4A and Cry4B was produced with the MAPS program (http://bioinfo1.mbfys.lu.se/TOP/webmaps.html). Figures 2 to 8 were produced using Pymol (16).
![]() View larger version (45K): [in a new window] |
FIG. 2. Ribbon representations of the Cry4Aa fold. (A) Overall view of the Cry4Aa toxin, which is composed of three domains. Pore-forming domain I is red, putative receptor binding domain II is yellow, and C-terminal domain III is blue. The secondary structure elements of each of the three domains are labeled in panels B to D. Each individual ß-sheet is a different color. See Fig. 1B.
|
![]() View larger version (39K): [in a new window] |
FIG. 8. Comparison of the structures adopted by the three surface-exposed loops of Cry4Aa and Cry4Ba at the extremity of domain II. Domain II of Cry4Aa is cyan, and domain II of Cry4Ba is yellow. The locations of loops 1, 2, and 3 on domain II are indicated, and close-ups highlight the structural differences in these putative receptor binding regions. With the possible exception of loop 1 of Cry4Ba, which makes several crystalline intermolecular contacts (7), the conformations of the other loops are likely to be determined by intramolecular contacts, not by crystal packing interactions.
|
competent cells. All mutations were confirmed by DNA sequencing. |
View this table: [in a new window] |
TABLE 1. Sequences of primers used in site-directed mutagenesis
|
|
|
|---|
-helices
5 and
6 and ß-strands ß9 and ß10 in domains 1 and 2, respectively. The former loop is highly susceptible to proteolysis by trypsin-like enzymes (3). Elimination of the latter cleavage site by replacement of Arg-235 with a glutamine residue yielded a single mutant of Cry4Aa (Cry4Aa-R235Q; referred to below as Cry4Aa) that retained toxicity for A. aegypti larvae (8). After trypsin digestion, a 65-kDa fragment was obtained, which was crystallized (6) (Fig. 1). Thus, the absence of electron density in loop
5-
6 was probably due to conformational flexibility, not due to a nick introduced into the polypeptide chain by proteolysis (see below). |
View this table: [in a new window] |
TABLE 2. Refinement statistics
|
Pore-forming domain I.
Cry4Aa N-terminal domain I (residues 68 to 321) is composed of seven amphipathic helices that are all clearly defined in our final electron density map. The most hydrophobic helix,
5, is located centrally and is surrounded by the six remaining helices. Helix
2 is interrupted by a short loop section and thus can be divided into
2 and
2b, as in Cry3Aa and Cry1Aa (29, 42) (Fig. 2). Overall, the organization of domain I is reminiscent of the organization of other pore-forming proteins composed of
-helices, such as colicin A (48) or hemolysin E from E. coli (64), with which Cry4Aa exhibits distant structural homology. A number of 128 residues of Cry4Aa and hemolysin E can be superimposed with a residual root mean square deviation of 4.2 Å, giving a Z score of 5.2. Although the architecture of the pore-forming state of a Cry toxin has not been determined yet, an "umbrella model" has been proposed to account for the toxicity. In this model, an intermediate state in the reaction pathway consists of insertion of helices
4 and
5 into the membrane as a helical hairpin structure, with the remaining helices lying at the membrane surface (26). This proposed mechanism is supported by the results of mutagenesis studies that demonstrated the crucial role of these two helices for the toxicity of Cry4Ba (61). It is also consistent with the recent finding that a crystallized Cry4Ba toxin that lacks helices 1 and 2 remains toxic (7). Insertion of a hairpin structure into the membrane, leading to pore formation, presumably follows large conformational changes in the toxin, possibly after receptor binding, proteolysis, and/or multimerization, as shown previously for Cry1Ab and Cry1Ac (4, 52, 59). The refolding of a hydrophobic hairpin motif, primed by a decrease in the pH or contact with the cytoplasmic membrane, could also play a key role in pore formation by other bacterial toxins, including colicins, as well as cholera, pertussis, and anthrax toxins (12, 21, 22). In Cry4Aa domain I, a larger number of electrostatic charges are found at the accessible surface of
-helices
1,
6, and
7 than at the surface contributed by helices
3 and
4 (Fig. 3). In the present water-soluble structure of Cry4Aa toxin, these electrostatic charges exposed at the surface of
-helices
1,
6, and
7 are largely neutralized by opposite charges located at the surface of the interacting domain II (Fig. 4). Conformational changes of the toxin (e.g., upon receptor binding) that would disrupt the interface between domains I and II are likely to expose these electrostatic charges to the solvent. Thus, their asymmetrical distribution should influence the orientation of the toxin molecule as it approaches the target membrane for
4-
5 hairpin insertion. It is possible that long-range electrostatic interactions result in an orientation of domain I with helices
4 and
5 approximately perpendicular to the lipid bilayer, as was proposed previously by Parker et al. for colicin A (48). Proteolytic cleavage between helices
5 and
6 of Cry4Aa or Cry4Ba was proposed to trigger the conformational changes required to facilitate membrane insertion (3). However, prevention of
5-
6 interhelical proteolysis by replacement of Arg-203 with Ala increases Cry4Ba larvicidal activity in vivo (1, 3). Likewise, deletion of a trypsin cleavage site at position 235 of the Cry4Aa sequence by replacement of Arg-235 with a Gln residue does not have an adverse effect on Cry4Aa in vivo toxicity for A. aegypti larvae (6). In the Cry4Aa crystal structure, we found no electron density accounting for the segment connecting helices
5 and
6, which is thus presumably flexible. However, we cannot completely rule out the possibility that in vivo, cleavage at this site by gut proteases primes the toxin for membrane penetration.
![]() View larger version (78K): [in a new window] |
FIG. 3. Surface representation of the electrostatic potential of pore-forming domain I of Cry4Aa (calculated using Pymol [16]). Positive electrostatic potentials are blue, and negative electrostatic potentials are red. The locations of solvent-exposed -helices are indicated. The solvent-accessible surfaces of -helices 1, 6, and 7 (A) show relatively higher potential and clear charge separations (including a "basic strip") than -helices 3 and 4 (B). Panel B is a view with domain I rotated 180° along a vertical axis; this has implications for the way that domain I approaches the target cell membrane (see text).
|
![]() View larger version (77K): [in a new window] |
FIG. 4. "Open book" representation of the interfaces between domains I and II of Cry4Aa and Cry4Ba. The views were obtained by rotating each of the interacting domains approximately 90° around a vertical axis. A hydrophobic patch is visible at the interface between domains I and II. Amino acids L326, I330, Y331, V333, L334, and F336 in Cry4Aa and amino acids F287, I291, Y292, A294, L295, and V296 in Cry4Ba, which are present in this hydrophobic patch, are labeled.
|
4-loop-
5 hairpin structure is required (27). Interestingly, the 15-residue
4-
5 loop of Cry4Aa has a unique structure compared to other Cry toxins, with several proline residues located at positions 193, 194, and 196 (Fig. 5). Moreover, cysteine residues present at positions 192 and 199 form a disulfide bridge, thus restricting the flexibility of this potentially mobile segment (Fig. 1 and 5). Both the unique disulfide bridge (Cys192-Cys199) and the proline-rich motif (Pro193-Pro-Asn-Pro196) play essential roles in Cry4Aa toxin activity, conceivably by maintaining the
4-
5 loop structural integrity, which may be required for efficient membrane insertion of the
4-
5 transmembrane hairpin (58). Further studies of the role of the
4-
5 hairpin of Cry4Aa by using mutagenesis demonstrated that the A. aegypti larvicidal activity was completely abolished when the strictly conserved aromatic residue Tyr-202 was replaced by an aliphatic amino acid, while replacement by an aromatic side chain, phenylalanine, did not affect the toxicity (50). This is consistent with the crucial role played by the corresponding residue Tyr-170 for the larvicidal activity of the Cry4Ba toxin (36). Indeed, aromatic Trp and Tyr residues tend to specifically interact with the lipid membrane outer leaflets, as was previously shown structurally for the fusion loops of class II viral envelope glycoproteins (9). A large number of hydrophobic residues exposed to solvent are also found in other pore-forming toxins, including hemolysin E from E. coli (64) and aerolysin (47). These residues were proposed to interact with hydrophobic lipid tails. A number of conserved aromatic amino acids, including Tyr-202, could interact with the phospholipid head groups, thus anchoring the toxin next to the membrane-water interface. A functional analysis of the channel activities of various Cry toxins has been described previously. Membrane perturbation revealed that the activated Cry4Aa toxin could form ion channels with a conductance of 127 pS, a value which is comparable to the values for Cry4Ba (
68 to 127 pS) (50a) and Cry1Ca (
120 pS) (56) but lower than the values for Cry1Aa (
450 pS) (29) and Cry1Ac (
457 pS) (56). Channels formed by Cry4Aa are cation selective and voltage independent, like the channels induced by other Cry toxins (50a, 55). Unlike the homologous toxin Cry4Ba, the 65-kDa activated Cry4Aa toxin was unable to induce the release of entrapped calcein from pure liposomes (W. Pornwaroon, personal communication). The different characteristics of membrane perturbation induced by Cry4Aa and Cry4Ba may be related to the striking differences in the length and conformation of their
4-
5 membrane insertion loops.
![]() View larger version (45K): [in a new window] |
FIG. 5. View of the 4- 5 loop in domain I of Cry4Aa. This segment is thought to play an important role in membrane insertion (see text). At the bottom is a close-up of the region containing the 4- 5 loop indicated by the rectangle. The final electron density map is displayed at a contour of 1 . There is a disulfide bridge between Cys-192 and Cys-199.
|
-helix
8 and a short 310 helix 8a and adopts a fold similar to that of other known Cry protein structures (Fig. 2). The interface between domains I and II is composed of a mixture of salt bridges, hydrogen bonds, and van der Waals interactions. Since insertion into the lipid bilayer presumably involves structural rearrangements in order to engage the hairpin in the target membrane, disruption of these interdomain interactions must occur prior to pore formation (55). In this respect, an interesting feature is the presence of a conserved hydrophobic patch on the molecular surfaces corresponding to the domain I-domain II interface of Cry4Aa and Cry4Ba (Fig. 4). Hydrophobic patches on protein surfaces are generally determinants of protein-protein or protein-ligand interactions (43). The biological relevance of these hydrophobic patches of the Cry4Aa and Cry4Ba toxins requires further investigation.
A search for homologous three-dimensional structures in the PDB revealed that domain II of Cry4Aa is structurally similar to the plant lectin jacalin (53) and to Maclura pomifera agglutinin (40). The architecture shared with lectins suggests that domain II probably binds to the carbohydrate moiety of a glycoprotein receptor of the target insect membrane. This notion is further reinforced by the finding that Caenorhabditis elegans resistance to Cry5B toxicity is linked to the loss of a gene encoding a galactosyltransferase (28). Indeed, loss of this carbohydrate-modifying enzyme could directly affect the binding of the toxin to its receptor(s) (28). Two proteins, aminopeptidase N and cadherin-like protein, have been characterized as candidate receptors for lepidopteran-specific Cry1 toxins (37, 44, 52, 62). By contrast, no receptor protein for dipteran-specific toxins has been identified so far. Comparison with the M. pomifera agglutinin structure (PDB code 1JOT) (40), whose interaction with a disaccharide is mediated by three aromatic amino acids, revealed that Cry4Aa also possesses a cluster of aromatic amino acids, Tyr-341, Tyr-343, Tyr-344, and Tyr-348 in the ß1-
8 loop and Tyr-513 in loop 3 (Fig. 1 and 6). These five aromatic amino acids form a potential binding site with dimensions that could accommodate a short oligosaccharide. The functional importance of this region of domain II was further established by mutating two amino acids in the ß1-
8 loop of Cry11A (23) and Tyr-455 in loop 3 of Cry4Ba (60). A significant loss of toxicity for A. aegypti was observed.
![]() View larger version (30K): [in a new window] |
FIG. 6. View of the exposed cluster of aromatic amino acids (indicated by sticks) at the surface of domain II of Cry4Aa (only a partial view of the -carbon chain of domain II is shown). This cluster is proposed to function as a carbohydrate binding site (see text). Secondary structure elements are indicated.
|
Mutations in domain III of Cry1Aa toxin had an effect on both ion channel activity and membrane permeability (56, 67). Domain III could play a role in protecting the toxin against further cleavage by gut proteases (42). Domain swapping experiments suggested that domain III is also involved in determining insect specificity (17, 18, 19, 20).
A three-dimensional structural similarity search revealed that domain III closely resembles the N-terminal cellulose binding domain of a protein from the bacterium Cellulomonas fimi (33) and a xylanase from Clostridium thermocellum (15). This suggests that like domain II, domain III could also bind carbohydrate residues. Although the level of amino acid sequence identity between domain III of Cry4Aa and the xylanase is only 11.5%, the structural similarity is quite extensive since the two polypeptide segments can be superimposed with a residual root mean square deviation of 2.2 Å, giving a Z score of 12.2 (Fig. 7). Thus, one possibility is that insect specificity is determined by protein-protein or protein-carbohydrate interactions mediated by both domains II and III of the toxin. So far, the importance of carbohydrates in dipteran-specific toxins has not been demonstrated. However, lectin-like domain III of the lepidopteran-specific Cry1Ac toxin was shown previously to bind N-acetylgalactosamine (11, 31, 32).
![]() View larger version (41K): [in a new window] |
FIG. 7. Superposition of C-terminal domain III of Cry4Aa with xylanase from C. thermocellum, highlighting the common fold. Only the -carbon traces are shown (magenta for Cry4Aa and green for xylanase).
|
Like the complementarity-determining regions of immunoglobulins, three loops that have various lengths and amino acid sequences connect a conserved framework of ß-strands. These loops, which are clustered at the extremity of domain II opposite its N and C termini (Fig. 2 and 8), connect strands ß2 and ß3 (residues 372 to 379; loop 1), strands ß6 and ß7 (residues 431 to 438; loop 2), and strands ß10 and ß11 (residues 511 to 514; loop 3) of domain II (42). Superposition of the corresponding segments of Cry4Aa and Cry4Ba revealed significant structural divergence (Fig. 8). In particular, loop 2 in Cry4Aa is six residues longer than the corresponding loop in Cry4Ba (Fig. 8). Before the experimental structures were reported, Abdullah and coworkers introduced residues from Cry4Aa into the three loops of Cry4Ba domain II. Exchanging loop 3 significantly enhanced the toxicity of Cry4Ba for Culex, while the activity against Anopheles and Aedes larvae was maintained (1). This suggested that an important determinant of the specificity of the Cry4Aa toxin for Culex was located in the loop 3 region and that important determinants of the toxicity of Cry4Ba for Anopheles and Aedes were in loops 1 and 2.
Here, we used site-directed mutagenesis based on the crystal structure to identify residues crucial for the toxicity of Cry4Aa. We selected exposed residues in the three loops and replaced them with the structurally corresponding residues of Cry4Ba toxin or performed a deletion if the corresponding segment was shorter in Cry4Ba (e.g., loop 2). The results for the larvicidal activities of the Cry4Aa toxin mutants are summarized in Table 3.
|
View this table: [in a new window] |
TABLE 3. Toxicity assays for variant Cry4Aa toxins with three species of mosquitoes
|
KYLN, 4AL2
YLN, and 4AL2
LN), were expressed very poorly and could not be studied further. The seven other mutants of Cry4Aa could be expressed in E. coli at levels comparable to the level of the wild-type toxin. Replacement of residues of Cry4Aa in loop 1 with the corresponding residues of Cry4Ba did not dramatically alter the toxicity for larvae of members of the three genera of insects. As many as four residues (with the amino acid sequence TTPN) of loop 1 could be replaced (mutant 4AL1YQDL), leading to only a marginal decrease (approximately twofold) in the toxicity of the corresponding mutant for A. dirus and C. quinquefasciatus, while full toxicity for A. aegypti larvae was retained (Table 3).
This suggests that there are no strong structural constraints imposed on loop 1 for the binding of Cry4Aa to its receptors or that this loop does not participate in binding. By contrast, introduction of three residues of loop 1 of Cry4Aa into Cry4Ba (mutant 4BL1QTT) led to a severely impaired Cry4Ba toxin (1).
In Cry4Aa mutant 4AL2
KY two residues of the long loop2 were deleted to mimic the shorter loop present in Cry4Ba. Large amounts of this protein could be expressed in E. coli, and digestion of it by trypsin yielded a pattern similar to the pattern for the wild-type toxin (data not shown). However, the toxicity for the three insect genera was dramatically reduced (Table 3); for example, the toxicity for A. dirus was reduced about 300-fold. This suggests that there is direct participation of this loop in receptor binding, although we cannot formally rule out the possibility that there are some conformational change effects, which would alter the integrity of the protein structure. Interestingly, a single substitution within loop 2, replacement of Asn-435 by a tyrosine residue, preserved most of the toxicity, indicating that the length of the loop rather than its precise sequence is an important determinant of specificity. Likewise, replacement of Lys-514 in loop 3 by an Asn residue, as found in Cry4Ba, resulted in an active toxin.
Interestingly, loops 2 and 3 are clustered in the vicinity of the ß1-
8 loop, close to the interface between domain II and domain I, whereas loop 1 is some 25 Å away (Fig. 2). This region appears to be crucial for receptor binding by Cry4Aa, an event which could trigger conformational changes that lead to disruption of the interface between domains I and II and prime domain I for insertion into the host membrane.
Thus, taken together, our data suggest that different regions of Cry4Aa and Cry4Ba are important for toxicity, possibly by using distinct binding sites for interaction with the host receptors. While these results are consistent with the synergistic effects of the two toxins that have been observed (49), they do not support approaches in which fragments of one toxin could be easily grafted onto the other toxin to produce an engineered Cry toxin having a broadened spectrum.
However, we hope that the availability of an experimental structure for a complete active fragment of Cry4Aa will accelerate the development of engineered Cry toxins that have increased potency and prolonged stability. This structure should be useful if insect resistance to the existing Cry toxins emerges, which seems likely. It should also stimulate further mechanistic studies aimed at dissecting the molecular steps leading to pore formation.
The laboratory of J.L. is supported by grants from N.T.U. (grant RG 29/05), the Singapore Biomedical Research Council (grants 03/1/21/20/291 and 02/1/22/17/043), and the Singapore National Medical Research Council (grant NMRC/SRG/001/2003). P.B. acknowledges support from the Thailand Research Fund and the National Science and Technology Development Agency, Thailand.
|
|
|---|
This article has been cited by other articles:
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Copyright © 2009 by the American Society for Microbiology. For an alternate route to Journals.ASM.org, visit: http://intl-journals.asm.org | More Info»