Previous Article | Next Article ![]()
Journal of Bacteriology, January 2007, p. 422-429, Vol. 189, No. 2
0021-9193/07/$08.00+0 doi:10.1128/JB.01270-06
Copyright © 2007, American Society for Microbiology. All Rights Reserved.
,
Unité de Pathogénie Bactérienne des Muqueuses, Institut Pasteur, Paris, France
Received 11 August 2006/ Accepted 19 October 2006
|
|
|---|
|
|
|---|
Hence, new therapeutic strategies are required to overcome resistance to known antibiotics. PG is an essential macromolecule that surrounds bacteria and is responsible for their shape and resistance to turgor pressure. Its central role in cell viability has made the biosynthesis of PG one of the most successful antibiotic targets in bacteria. However, little is known about PG metabolism in H. pylori. Detailed knowledge about the PG metabolism of H. pylori could lead to the development of new antibiotics. Based on genome sequences, H. pylori appears to have little redundancy of genes involved in PG metabolism (1, 4, 20). H. pylori has all of the genetic complement required for the synthesis of PG precursors. Assembly of these precursors in the periplasm requires synthetases and PG hydrolases. H. pylori has three synthetases, PBP1, PBP2, and PBP3, and three PG hydrolases, including two lytic transglycosylases, Slt (HP0645) and MltD (HP1572), and an N-acetylmuramoyl-L-alanyl amidase, AmiA (HP0772).
The aim of this work was to characterize the two lytic transglycosylases, Slt and MltD. We constructed single and double mutants and studied their growth and morphological phenotypes. Using reverse-phase HPLC, we analyzed the PG muropeptide composition and glycan strand distribution in the mutants. Our results indicate that Slt and MltD are nonredundant lytic transglycosylases with exo and endo types of activity, respectively.
|
|
|---|
-D-Glu-meso-diaminopimelic acid; G-anhM-tetrapeptide, N-acetyl-D-glucosaminyl-N-acetyl-anhydromuramyl-L-Ala-
-D-Glu-meso-diaminopimelic acid-D-Ala; G-anhM-tetrapeptide-glycine, N-acetyl-D-glucosaminyl-N-acetyl-anhydromuramyl-L-Ala-
-D-Glu-meso-diaminopimelic acid-D-Ala-Gly; G-M-pentapeptide, N-acetyl-D-glucosaminyl-ß(1,4)-N-acetylmuramyl-L-Ala-
-D-Glu-meso-diaminopimelic acid-D-Ala-D-Ala.
Bacteria, cells, and growth conditions.
Escherichia coli MC1061 (8) and DH5
were used as hosts for construction and preparation of plasmids. These strains were cultivated in Luria-Bertani solid and liquid media supplemented as appropriate with spectinomycin (100 µg/ml), kanamycin (40 µg/ml), or both of these antibiotics. H. pylori strains 26695 (20) and N6 (11) were used to construct mutants. PG was extracted from strain 26695 and isogenic mutants of this strain. These bacteria were grown microaerobically at 37°C on blood agar plates or in liquid medium consisting of brain heart infusion (Oxoid) containing 0.2% ß-cyclodextrin (Sigma) supplemented with an antibiotic-antifungal agent mixture (7). H. pylori mutants were selected with 20 µg/ml kanamycin or 10 µg/ml gentamicin.
Construction of mutants. Genes were disrupted as previously described (18). H. pylori mutants were constructed by allelic exchange after transformation with a suicide plasmid carrying the gene of interest interrupted by a nonpolar aphA-3 cassette (18) or the mini-Tn3-Km transposon (14). A double mutant was constructed by disrupting the slt gene with the nonpolar gentamicin aacC4 (6) cassette as described below for the nonpolar kanamycin cassette. PCR was used to confirm that correct allelic exchange occurred. Gene replacements were confirmed by sequencing to ensure sequence fidelity. All reagents, enzymes, and kits were used according to manufacturers' recommendations. Midiprep (HiSpeed plasmid midi kit) and DNA extraction kits (QIAamp DNA extraction kit) were purchased from QIAGEN.
Plasmids pILL2001 and pILL2002 were used to construct the slt and mltD mutants, respectively. pILL570
Not carrying the hp0645 (slt) and hp1572 (mltD) genes was used as the template for an Expand High Fidelity PCR (Amersham) with oligonucleotides 645-1 (5'-GAUGAUGAUGGTACCGTGTCTGTTGTTTCTAGCATC-3' (the underlined sequence is a KpnI site) and 645-2 (5'-AUCAUCAUCGGATCCCTAAACGACATGTTTAACCCCAACATC-3' (the underlined sequence is a BamHI site) for the slt gene and with oligonucleotides 1572-1 (5'-GAUGAUGAUGGTACCTTTTCCTGCTATAAGCCCTTGATG-3' (the underlined sequence is a KpnI site) and 1572-2 (5'-AUCAUCAUCGGATCCCTTGGAAACCTTAAAATCCTACAACCAC-3' (the underlined sequence is a BamHI site) for the mltD gene. PCR products were digested with BamHI (Amersham) and KpnI (Amersham) and ligated (T4 DNA ligase; Amersham) with the aphA-3 or aacC4 nonpolar cassette digested with the same endonucleases.
Extraction and analysis of lipopolysaccharide. H. pylori LPS was extracted from plate cultures by the proteinase K method (10). LPS samples were separated by Tricine-sodium dodecyl sulfate (SDS)-polyacrylamide gel electrophoresis as described by Lesse and colleagues (16). The LPS was visualized by silver staining (21).
Peptidoglycan extraction and analysis. The growth of liquid cultures of the H. pylori parental strain and isogenic mutant strains was stopped after various times, and the cultures were chilled in an ice-ethanol bath. The crude murein sacculus was immediately extracted in boiling sodium dodecyl sulfate (final concentration, 4%). Purification procedures and HPLC analyses were performed as previously described (12). Mutanolysin (Sigma)-digested samples were analyzed by HPLC using a Hypersil ODS18 reverse-phase column (250 by 4.6 mm; particle size, 3 µm) with a 0 to 15% methanol (HPLC grade; Fischer) gradient in sodium phosphate buffer (pH 4.3 to 5.0). Chromatograms were obtained by monitoring at 206 nm. Each peak was collected, desalted, and identified by matrix-assisted laser desorption ionization mass spectrometry as described previously (2).
A glycan chain analysis was performed as previously described (5, 13). Briefly, H. pylori PG was digested with purified human serum amidase kindly provided by Waldemar Vollmer. The digestion was done in 50 mM Tris-HCl (pH 7.9), 5 mM MgCl2, 0.02% NaN3. Soluble material was first purified on a MonoS (HR5/5) column (Amersham Pharmacia) using 10 mM sodium phosphate buffer (pH 2). Glycans eluted with the flowthrough and were collected. Free peptides were eluted in one step using 1 M NaCl-10 mM sodium phosphate buffer (pH 2). The experiments were performed at room temperature using a flow rate of 1 ml/min. An amino acid and amino sugar analysis was performed with the purified glycan fraction and the free peptide fraction to ensure the purity of each fraction, which confirmed that complete digestion had occurred. Purified glycans were analyzed by reverse-phase HPLC using a 5-µm Nucleosil 300 C18 column (250 by 4.6 mm) at 50°C. A convex gradient ranging from 0 to 10.5% acetonitrile (4 curve of the Shimadzu CLASS-VP software) in 100 mM sodium phosphate buffer (pH 2) was used for 90 min at a flow rate of 0.5 ml/min. Unresolved glycan material was eluted after the convex gradient in a single step with 30% acetonitrile in 100 mM sodium phosphate buffer (pH 2). Glycan material was detected at 202 nm.
Slt70 digestion of H. pylori PG. PG from strain 26695 slt mltD was incubated in 300 mM sodium acetate buffer (pH 4.5) with His6-tagged Slt70 (1 ng/ml) for different times (1 and 5 min and 48 h) at 37°C. The reaction was stopped by boiling a sample for 5 min. Muropeptides were separated as indicated above and were identified by matrix-assisted laser desorption ionization mass spectrometry as described previously (2).
Electron microscopy. For transmission electron microscopy, samples were washed in PBS and prefixed in 2.5% glutaraldehyde in PBS for 30 min. After postfixation in 2% molybdate (in PBS), bacteria were examined with a JEOL Jem 1010 electron microscope.
|
|
|---|
![]() View larger version (13K): [in a new window] |
FIG. 1. Schematic diagram of the genomic regions surrounding the slt and mltD genes in strain 26695. By PCR analysis, we confirmed the conservation of the two regions in different H. pylori strains.
|
![]() View larger version (51K): [in a new window] |
FIG. 2. Silver staining of LPS extracted from different H. pylori strains and slt mutants. While the mini-Tn3-Km transposon insertion into the slt gene had a polar effect on the galU gene resulting in a rough LPS phenotype, the nonpolar K2 cassette did not affect the smooth LPS genotype of the N6 strain. Inactivation of the mltD gene had no effect on the LPS phenotype (data not shown).
|
![]() View larger version (55K): [in a new window] |
FIG. 3. Impact of the polar effect on the mini-Tn3-Km transposon on the morphology of the H. pylori mltD mutant. Insertion of the transposon into the mltD gene resulted in a chaining phenotype, probably due to a polar effect on hp1567 encoding a putative GTPase. Inactivation of mltD with the nonpolar K2 cassette had no effect on the mutant morphology, reinforcing the nonpolar nature of the K2 cassette. An slt K2 mutant had normal morphology (data not shown).
|
![]() View larger version (24K): [in a new window] |
FIG. 4. (A) Growth curves for H. pylori 26695 and slt and mltD mutants of this strain. Growth in liquid cultures was monitored by determining the optical density at 600 nm, and bacterial viability was monitored by counting the number of CFU. Growth experiments were done six times (the results of a representative experiment are shown). The three strains had identical growth rates. (B) Survival of the mltD strain in the stationary phase was enhanced, as illustrated by a lower death rate. On average, it took 66 min for one-half of the mltD population to die, while on average one-half of the populations of both the 26695 strain and the slt mutant died in 32 to 34 min.
|
Globally, the mltD mutant had a muropeptide composition similar to that of parental strain 26695. Some differences were apparent, such as a modest decrease in the level of anhydromuropeptides (Table 1). Another difference involved the proportions of monomeric and dimeric muropeptides. The mltD mutant had a modest increase in the proportion of the monomeric muropeptides compared to the parent strain, indicating that there was a decrease in the degree of cross-linking in the mltD mutant. The slt mutant exhibited the same global trend in terms of changes in muropeptide composition as the mltD mutant, but to a much greater extent. The decrease in the level of anhydromuropeptides and degree of cross-linking (decrease in the proportion of dimers) were more pronounced in the slt mutant. Furthermore, in the slt mutant there was a marked accumulation of muropeptides having a tripeptide as a stem peptide. The increase was inversely proportional to the decrease in the level of muropeptides having tetrapeptides and tetraglycine peptides (Table 2). The differences in the degrees of cross-linking, in the levels of anhydromuropeptides, and in the levels of G-M-tripeptide were even greater in the slt mltD double mutant. Most importantly, despite the fact that slt and mltD are the only two homologues of genes encoding known lytic transglycosylases in the H. pylori genome, the double mutant still had anhydromuropeptide structures in its muropeptide. These structures were composed mainly of the G-anhM-penta, G-anhM-tri-tetra-G-M, and G-anhM-penta-tetra-G-M muropeptides (see Tables S1, S2, and S3 in the supplemental material). Only trace amounts of the other anhydromuropeptides were found.
|
View this table: [in a new window] |
TABLE 1. Proportions of monomers, dimers, and anhydromuropeptides and average glycan chain lengths after 8, 24, and 48 h of incubation
|
|
View this table: [in a new window] |
TABLE 2. Proportions of dipeptides, tripeptides, tetrapeptides, tetraglycinepeptides, and pentapeptides after 8, 24, and 48 h of incubation
|
Glycan chain length analysis.
Next, we were interested in characterizing by a more detailed method the glycan strands of the parental strain and the single mutants. We digested the purified peptidoglycan of each strain with human serum amidase and separated the glycan strands from the free peptides by chromatography using a MonoS column. The glycan fraction eluted exclusively with the flowthrough, while the free peptides were retained on the column. The purified glycan fraction was analyzed by reverse-phase HPLC (see Fig. S1 in the supplemental material). The profile is reminiscent of the results of a glycan strand analysis of E. coli (13). The analysis of the glycan strand distribution was restricted to an analysis after 8 h of growth since the human serum amidase was not able to cleave the G-M-dipeptide that accumulated in the stationary phase (24 h and 48 h), as previously described (23). The proportion of each peak was calculated based on the total amount of UV-absorbing material (Fig. 5; see Fig. S1 in the supplemental material). Several differences were observed between the parental strain and the two single mutants. Both mutants showed marked increases in the proportion of very long glycan chains (
26 disaccharide repeating units) (see Fig. S1 in the supplemental material). The proportion of these glycan species increased from 17.4% in the parental strain to 23.6% and 28.3% in the mltD and slt mutants, respectively. From the analysis of the area percentage of each glycan species and the corresponding molar percentages, we observed that in the mltD mutant there was a marked decrease in the short glycan species (1 to 11 disaccharide repeating units) (Fig. 5A and C) and an inverse increase of the glycan species with more than 19 disaccharide repeating units (Fig. 5A). These results suggest that mltD might have an endotransglycosylase activity.
![]() View larger version (24K): [in a new window] |
FIG. 5. (A and B) Glycan strand length distribution for parental strain 26695 compared to the glycan strand length distributions for the slt mutant (A) and the mltD mutant (B). The level of each glycan strand species is expressed as a percentage of the total UV absorbing material (see Fig. S1 in the supplemental material). (C) Level of each glycan strand species expressed as a molar percentage, taking into account the abundance of each species. The data show that the majority of the H. pylori glycan strands are short and that the two mutants have decreased amounts of short glycan strands. Furthermore, the slt mutant is characterized by an almost complete absence of G-anhM disaccharide (peak 1 in Fig. S1 in the supplemental material).
|
Slt70 digestion and G-M-tripeptide localization. In the muropeptide and glycan strand analysis, we observed that the slt mutant accumulated the G-M-tripeptide motif and generated significantly less of the disaccharide G-anhM glycan species. Since we did not observe the monomeric G-anhM-tripeptide in the PG under any conditions tested, this suggests that the G-M-tripeptides are either at the nonreducing ends of the glycan strands or in the middle of the glycan strands. However, since the slt mutant generates less G-anhM, this suggests that Slt functions as an exoenzyme. Hence, the accumulation of the G-M-tripeptides was probably due to a preferential location at the nonreducing ends of the glycan strands. To test this hypothesis, we used the E. coli Stl70 lytic transglycosylase, which has been shown to be an exoenzyme from the nonreducing end (3, 17). We digested the same amount of H. pylori PG with Slt70 for very brief periods (1 and 5 min) and after 2 days analyzed the nature of the Slt70-generated muropeptides by HPLC. As shown in Fig. 6, Slt70 generated the G-anhM-tripeptide preferentially after 1 min of incubation, clearly indicating that the G-M-tripeptides are located preferentially at the nonreducing ends of the glycan strands. Similar results were obtained after 5 min of digestion (data not shown).
![]() View larger version (16K): [in a new window] |
FIG. 6. Digestion of H. pylori PG with exo-type lytic transglycosylase Slt70 from E. coli. H. pylori PG was digested either completely with Slt70 (2 days) or for brief periods (1 and 5 min). Each peak was collected, desalted, and analyzed by matrix-assisted laser desorption ionizationtime of flight mass spectrometry to confirm the muropeptide nature of each peak. Peaks 1 to 9 correspond to G-anhM-tripeptide, G-anhM-tetrapeptide, G-anhM-tetrapeptide-glycine, G-anhM-dipeptide, G-anhM-pentapeptide, G-anhM-tri-tetra-G-anhM, G-anhM-tetra-tetra-glycine-G-anhM, G-anhM-tetra-tetra-G-anhM, and G-anhM-penta-tetra-G-anhM, respectively.
|
|
|
|---|
Analyses of the muropeptide compositions and the glycan strand distributions of the single and double mutants suggested that both proteins are lytic transglycosylases with nonredundant functions. Inactivation of each gene resulted in a substantial decrease in the level of anhydromuropeptides. Since these muropeptides species represent the products of lytic transglycosylase activities, the results suggested that both proteins function as transglycosylases. The muropeptide composition analysis of the single mutants and the double mutant (Table 1; see Tables S1 to S3 in the supplemental material) showed that the total percentage of anhydromuropeptides results from the additive effects of Slt and MltD. Hence, the decrease in the level of anhydromuropeptides in the double mutant compared to the level in the parental strain corresponds to the difference in the level of the anhydromuropeptides in the slt mutant plus the difference in level in the mltD mutant. This suggests that Slt and MltD each generate anhydromuropeptides independent of the other lytic transglycosylase and that the two proteins have different physiological roles.
Glycan strand analysis of the slt and mltD mutants confirmed this hypothesis. While both mutants accumulate very long glycan strands, as would be expected for lytic transglycosylase-deficient mutants, the mutants seem to act by different mechanisms. While the slt mutant increases the length of its glycan strands by generating less of the very short glycan strands, in particular the disaccharide G-anhM, the mltD mutant increases the length of its glycan strands by reducing the amount of glycan strands that are up to 10 to 11 disaccharide units long and gradually increasing the amount of glycan strands with more than 19 disaccharide repeating units (Fig. 5). The distinct patterns of glycan strand distribution of the slt and mltD mutants suggest that Slt and MltD function as an exo type and an endo type of lytic transglycosylase, respectively (Fig. 7). The inferred types of activities of Slt and MltD are consistent with the increased fitness of the mltD mutant seen during the stationary phase growth. As an endo type of lytic transglycosylase, MltD would have a greater impact on PG layer stability than Slt would have. In contrast, Slt would function primarily in releasing anhydromuropeptides during PG turnover. However, the inferred exo and endo types of lytic transglycosylase activity of Slt and MltD, respectively, are based on indirect evidence. We are currently working on the biochemistry of the proteins to confirm their activities in vitro.
![]() View larger version (28K): [in a new window] |
FIG. 7. Schematic diagram of the preferential spatial organization of different stem peptides of H. pylori PG and substrate specificity of the lytic transglycosylases Slt and MltD.
|
Interestingly, in the double mutant, we still observed the presence of anhydromuropeptides. We can explain this result either (i) by the hypothesis that there is a novel class of lytic transglycosylases, which still have to be identified, or (ii) by the hypothesis that the glycosyltransferase domain of the bifunctional class A high-molecular-weight PBP1 is capable of generating the intramolecular anhydrous bond as a nascent glycan strand is released from the undecaprenylphosphate anchor. Further work is required to distinguish between these two hypotheses. Nevertheless, the double mutant contains almost exclusively the G-anhM-pentapeptide and the G-anhM-penta-tetra-G-M dimeric muropeptide. This indicates that the anhydro ends of glycan strands are enriched in intact stem pentapeptides (Fig. 7), consistent with de novo synthesis favoring a role for PBP1 in the generation of the anhydromuropeptides.
Finally, our results indicate that in H. pylori synthesis of new glycan strands is initiated by a G-M-tripeptide and terminates with a G-M-pentapeptide. The G-M-tripeptide might originate from a classical lipid II precursor immediately processed from a pentapeptide to a tripeptide. Processing might occur either with an LD-endopeptidase or by consecutive digestion with DD- and LD-carboxypeptidases. H. pylori lacks classical DD-carboxypeptidases, although we cannot exclude the possibility that the three high-molecular-weight PBPs function as DD-carboxypeptidases. However, no homologue of known LD-peptidase has been found in the H. pylori genome, which would require a novel class of LD-peptidases. Alternatively, the G-M-tripeptide might originate directly from the PG precursor pool as a lipid precursor (as shown for E. coli and Staphylococcus aureus [19, 22]) and be used to initiate glycan strand elongation. In fact, a precursor pool origin for the G-M-tripeptide could be an elegant mechanism to naturally regulate the glycan strand length. The glycan strand length distribution would be regulated by the precursor pool of UDP-M-tripeptide rather by the synthetases or by the PG hydrolases.
C. Chaput was supported by a fellowship from the French Ministry of Science and from la Fondation pour la Recherche Médicale. I. G. Boneca was supported by a fellowship from the Fundação para a Ciência e Tecnologia (Portugal) and by a Bourse Roux from the Institut Pasteur and is an Institut National de la Santé et de la Recherche Médicale research scientist.
Published ahead of print on 3 November 2006. ![]()
Supplemental material for this article may be found at http://jb.asm.org/. ![]()
|
|
|---|
This article has been cited by other articles:
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Copyright © 2009 by the American Society for Microbiology. For an alternate route to Journals.ASM.org, visit: http://intl-journals.asm.org | More Info»