Previous Article | Next Article ![]()
Journal of Bacteriology, October 2007, p. 7503-7506, Vol. 189, No. 20
0021-9193/07/$08.00+0 doi:10.1128/JB.00957-07
Copyright © 2007, American Society for Microbiology. All Rights Reserved.
,
Laboratory of Cell Biology, Center for Cancer Research, National Cancer Institute, National Institutes of Health, Bethesda, Maryland 20892,1 Department of Biological Sciences, University of Wisconsin—Milwaukee, Milwaukee, Wisconsin 532012
Received 17 June 2007/ Accepted 2 August 2007
|
|
|---|
5-nm-wide cell surface filaments that appear to be anchored to the inner surface of the outer membrane. These filaments are absent in cells of a nonmotile gldF mutant but are restored upon expression of plasmid-encoded GldF, a component of a putative ATP-binding cassette transporter. |
|
|---|
Genetic analyses have identified 12 cell envelope-associated Gld (gliding) proteins that are required for gliding (2, 4, 5, 8-10, 14, 15). GldA, GldF, and GldG appear to interact to form an ATP-binding cassette (ABC) transporter (8). The cargo of this transporter and its exact role in gliding are not known. GldI is a lipoprotein that is similar to peptidyl-prolyl isomerases involved in protein folding (14). Analysis of the amino acid sequences of the remaining eight Gld proteins (GldB, GldD, GldH, GldJ, GldK, GldL, GldM, and GldN) did not suggest obvious functions (4, 5, 9, 10, 15). Genetic analysis suggests that few if any proteins that are absolutely required for motility remain to be identified (4). The known Gld proteins are thought to be associated with the cytoplasmic membrane, periplasm, and inner face of the outer membrane, suggesting that much of the gliding motility apparatus resides in this region of the cell envelope (2, 4, 5, 8-10, 14, 15). Some of these proteins presumably comprise the gliding motor, which is thought to exert force on cell surface components of the machinery. The cell surface components have not yet been identified by genetic analyses. It is possible they could have been missed because of redundancy in the outer components, such that no single cell surface protein is essential for cell movement.
To explore the structural components of the apparatus for gliding motility, we carried out three-dimensional (3D) imaging of intact, plunge-frozen F. johnsoniae cells using cryo-electron tomography, which provides a powerful approach to visualize the architectures of prokaryotic and eukaryotic cells without fixation or staining (21, 25). Cells of wild-type F. johnsoniae UW101 (14) were examined and compared to cells of the gldF mutant UW102-77 and to cells of UW102-77 complemented with pMK314, which carries the wild-type gldFG region (8). UW102-77 has a 2-bp deletion 17 bp downstream of the A residue of the gldF start codon (8). In addition to eliminating production of GldF protein, this frameshift mutation is polar on gldG, which encodes another component of the gld ABC transporter.
Cells for electron tomography analysis were grown in motility medium (MM) consisting of 3.3 g Casitone per liter, 1.7 g yeast extract per liter, and 3.3 mM Tris (pH 7.5). Erythromycin (100 µg/ml) was added to cultures carrying pMK314. Five milliliters of MM in a 125-ml flask was inoculated with cells and incubated overnight at 25°C without shaking until a density of approximately 5 x 108 cells/ml was reached. Cells in MM were examined for motility essentially as previously described (9, 10). Nearly every wild-type cell, and those of the complemented strain, exhibited rapid gliding over glass. In contrast, cells of the gldF mutant UW102-77 were completely nonmotile. Four-microliter samples in MM were applied to 3-mm-wide holey carbon grids, plunge-frozen in liquid ethane, and examined using a Polara microscope (FEI Corp., OR) equipped with a field emission gun operating at 300 kV and a 2K-by-2K charge-coupled device camera at the end of a GIF 2000 (Gatan, Inc., Pleasanton, CA) energy filtering system. In some cases, 0.2-µm latex spheres (Seradyn, Indianapolis, IN) were added to the cell suspension. Since these spheres bind to the cell surface and are propelled by the motility machinery, they serve as useful markers to direct attention to regions of the cell surface that are likely to have been actively moving at the time that the cells were plunge-frozen. Low-dose single-axis tilt series were collected from frozen-hydrated specimens at liquid nitrogen temperatures in the zero-loss mode at effective magnifications of x18,000 and with underfocus values of
6 to 7 µm. The angular range of the tilt series (
90 images) was from –70° to +70° at increments of 1.5°. The cumulative dose of the tilt series was less than 100 e–/Å2. Tilt series were initially aligned with gold markers using FEI inspect3D and further refined and reconstructed by weighted back-projection using Protomo (22). The 3D segmentation of cryo tomograms was performed with Amira (Mercury Systems, San Diego, CA).
As illustrated in Fig. 1, wild-type F. johnsoniae cells are
0.45 µm wide and vary in length from
5 to
10 µm. A tilt series was collected from the tip of a representative wild-type cell that had several attached latex spheres and was embedded in thin vitreous ice (Fig. 1). A representative tomographic slice from the interior of the cell shows features characteristic of typical gram-negative bacteria, including densities corresponding to the inner and outer membranes and the peptidoglycan layer. Other features visible include density arising from ribosomes in the cytoplasm, the latex beads attached to the cell surface, and dense granules which may be rich in polyphosphate (M. J. Borgnia, S. Subramaniam, and J. L. S. Milne, unpublished data). A striking feature of 3D reconstructions of wild-type cells (Fig. 1a and b) is the presence of thin filaments extending from the outer membrane (see Movie S1 in the supplemental material). The filaments are typically
5 nm wide and
100 nm long and are distributed unevenly on the cell surface. They are somewhat similar in appearance to the spicules of the nonflagellated swimming cyanobacterium Synechococcus sp. strain WH8113 (20). The four latex spheres that are associated with the cell shown in Fig. 1a are in close contact with the outer membrane in regions of the cell that also displayed cell surface filaments. In some cases, contact of the spheres with the cell surface appeared to be associated with deformation of the outer membrane (shown more clearly in Movie S1 in the supplemental material).
![]() View larger version (105K): [in a new window] |
FIG. 1. Cryo-electron tomography of wild-type and mutant F. johnsoniae cells. (a) Three-nanometer tomographic slice of a plunge-frozen wild-type cell. Features arising from the cytoplasmic membrane (CM), outer membrane (OM), peptidoglycan (P), cell surface filaments (F), and added latex spheres (S) can be visualized. The inset shows an expanded view of the periplasmic region at a location where filaments are observed. The densities arising from the outer membrane, cytoplasmic membrane, peptidoglycan layer, and patch (A) at the base of the outer membrane can be clearly seen. (b) Segmented representation of a whole wild-type cell in 3D, showing the spatial relationships between the various cellular components. Filaments (yellow), cytoplasmic and outer membranes (gray and light green, respectively), anchoring patches (red), and contributions from putative ribosomes in the cytoplasm (blue) are shown. (c) Three-nanometer tomographic slice from the gldF mutant. In this mutant, numerous vesicular blebs (B) are observed on the outer membrane surface. (d) Segmented representation of a gldF mutant cell, with color scheme as in panel b.
|
![]() View larger version (82K): [in a new window] |
FIG. 2. Restoration of filaments in gldF mutant UW102-77 complemented with pMK314. Projection images recorded from plunge-frozen cells of the wild type (a), gldF mutant UW102-77 (b), and gldF mutant UW102-77 complemented with pMK314 (c). No filaments are observed in the gldF mutant, although on rare occasions a patch-like feature was observed near the base of the outer membrane. The expression of wild-type GldF and GldG rescues both function and the observation of cell surface filaments. Filaments (F) in panels a and c are indicated. The schematic models in panels d, e, and f correspond to the data shown in panels a, b, and c, respectively, with the color scheme used in Fig. 1b and d.
|
Over the last three decades, numerous models have been proposed to explain the mechanism of gliding of F. johnsoniae and related bacteria (3, 11, 18, 19). These models generally invoke machinery in the cell envelope that interacts with and propels cell surface adhesins. The studies we report here provide the first direct evidence that the surfaces of F. johnsoniae cells contain thin filaments that appear to mediate gliding function and are thus likely to represent the elusive adhesive surface organelles of the F. johnsoniae gliding motility machinery.
Sequence data for C. hutchinsonii and F. johnsoniae were obtained from the Joint Genome Institute (http://jgi.doe.gov), Los Alamos National Labs, and the U.S. Department of Energy.
Published ahead of print on 10 August 2007. ![]()
Supplemental material for this article may be found at http://jb.asm.org/. ![]()
|
|
|---|
This article has been cited by other articles:
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Copyright © 2009 by the American Society for Microbiology. For an alternate route to Journals.ASM.org, visit: http://intl-journals.asm.org | More Info»