Previous Article | Next Article ![]()
Journal of Bacteriology, March 2007, p. 2069-2076, Vol. 189, No. 5
0021-9193/07/$08.00+0 doi:10.1128/JB.01236-06
Copyright © 2007, American Society for Microbiology. All Rights Reserved.

Department of Molecular Microbiology and Institute of Biomembranes, Utrecht University, 3584 CH Utrecht, The Netherlands,1 Laboratoire d'Ingénierie des Systèmes Macromoleculaires, UPR9027, IBSM/CNRS, 13402 Marseille Cedex 20, France2
Received 7 August 2006/ Accepted 1 December 2006
|
|
|---|
|
|
|---|
Type IV pilin-like N-terminal sequences are found not only in type IV pili and in the pseudopilin components of type II secretion systems of gram-negative bacteria, but also in competence systems in gram-positive bacteria and in flagella and sugar-binding proteins of archaea (39). In all these systems, the presence of proteins with prepilin-like N termini coincides with the occurrence of accessory proteins, including a prepilin peptidase, an ATPase, and a multispanning transmembrane protein (39).
How pilins and pseudopilins are transported across the cytoplasmic membrane and recruited by their cognate machinery is unknown. Two possible pathways have been proposed: one via the highly conserved Sec translocon and the other via a dedicated machinery implicating the prepilin peptidase, the ATPase, and/or the multispanning transmembrane protein mentioned above. The Sec system is used generally for protein transport across the cytoplasmic membrane (13). Two targeting pathways, the signal recognition protein (SRP) and SecB pathways, intersect at the Sec translocon (28). SecB interacts with the mature portion of presecretory proteins, and besides targeting the precursor to the translocase, it prevents their folding. SRP binds cotranslationally to hydrophobic sequences in its substrates. The ribosome-nascent chain complex subsequently binds FtsY and is targeted to the Sec translocon. Inner membrane proteins typically depend on a functional SRP pathway, whereas periplasmic and outer membrane proteins predominantly use the SecB route (11). Proteins targeted to the Sec system carry signal sequences that are characterized by a positively charged N-terminal region followed by a 10- to 15-residue-long hydrophobic core and a more polar C terminus containing the signal-peptidase cleavage site (53). Passage of the precursor over the inner membrane is followed by cleavage of the signal sequence by the signal peptidase LepB at the periplasmic side of the inner membrane (10). The N termini of the pilin and pseudopilin [referred to together as (pseudo)pilin] precursors (prepilins) share characteristics with Sec signal sequences, and previous studies have indeed shown that the N-terminal sequences of prepilins from Pseudomonas aeruginosa and Neisseria gonorrhoeae function as export signals for alkaline phosphatase in Escherichia coli (14, 46). However, the N termini of the prepilins are also distinct from Sec signal sequences, since they lack the signal-peptidase cleavage site C terminal to the hydrophobic domain and are, as mentioned above, processed by a specific prepilin peptidase N terminal to the hydrophobic segment at the cytoplasmic side of the membrane. These differences and the fact that the pilin-like proteins are always found in concert with other proteins have led to the proposal that pilins and pseudopilins are exported from the cytoplasm via a dedicated transport route formed by these accessory proteins (9, 18, 35).
To address the question of how (pseudo)pilins are translocated across the inner membrane, we used the major pseudopilin XcpT of the P. aeruginosa type II secretion system as a model protein. The type II secretion machinery of this organism requires at least 12 components, XcpA and XcpP to Z (20). XcpA functions as the prepilin peptidase and is shared by the Xcp system, the type IV piliation (Pil) system, and the Hxc system, which forms a second type II secretion system dedicated to the export of low-molecular-weight alkaline phosphatases (3). We demonstrate that XcpT translocation can occur independently of the presence of other Xcp components in P. aeruginosa and in E. coli and that transport is dependent on a functional Sec apparatus. Furthermore, we show that translocation occurs cotranslationally via the SRP pathway.
|
|
|---|
, C9, JS7131, and MC1060 and the MC1060 derivatives were grown at 37°C and other E. coli strains at 30°C in a modified LB broth (52), unless otherwise noted. For plasmid maintenance, the following antibiotics were used: for E. coli, 50 µg/ml ampicillin, 25 µg/ml kanamycin, 15 µg/ml tetracycline, and 15 µg/ml gentamicin, and for P. aeruginosa, 40 µg/ml gentamicin. |
View this table: [in a new window] |
TABLE 1. Strains used in this study
|
for routine cloning. Plasmids were introduced by the CaCl2 procedure into E. coli (42) or by electroporation into E. coli and P. aeruginosa (17). PCRs were performed with the proofreading enzyme Pwo DNA polymerase (Roche), and PCR products were cloned into the HincII site of vector pBC18R or into pCRII-TOPO according to the manufacturer's protocol. The lacI gene was PCR amplified using plasmid pET16b as a template and primers PB7 (5'-CTCCTTGCATGCACC-3') and PB8 (5'-CCCGCGCCCATGGGAAGGAGCTG-3'), thereby introducing an NcoI restriction site (underlined) downstream of the stop codon. The PCR product was cloned into pBC18R, which resulted in the construct pCR-LacI, and subsequently, the SphI-NcoI fragment of pCR-LacI was introduced into the pBBR1-MCS5 vector, resulting in pYRC. The phoA gene without the promoter and signal sequence-encoding part was PCR amplified from pPHO7 with primers PB1 (5'-GATCCCCGGGGATCCGACTCTTATACAC-3') and PB2 (5'-CGAAAATTCACTGTCTAGAGCGGTTTTATTTC-3'). A BamHI site (underlined) was introduced via PB1 upstream of the fragment encoding signal sequence-less PhoA and an XbaI site (underlined) via PB2 downstream of the stop codon. The PCR product was cloned into pBC18R, which gave pCR-PhoA. Plasmid pYRC-A was constructed by introduction of the BamHI-XbaI fragment of pCR-PhoA into BamHI-XbaI-digested pYRC. Cosmid pAX24 was used as a template to amplify xcpT with the oligonucleotides JAXcpTfor02 (5'-CTTCCGATCCTTCGAATCAACCAACTCGTG-3') and JAXcpTrev01 (5'-GCCCGCATGTCGGATCCGTTGTCCCAGTTG-3'), and the resulting product was cloned into pCRII-TOPO, resulting in pCR-XcpT1-2. Underlined in JAXcpTrev01 is the BamHI site that replaced the stop codon of xcpT and that allowed for the construction of a translational fusion between xcpT and phoA. The PstI-BamHI fragment of pCR-XcpT1-2 was cloned into pYRC-A, resulting in the construct pJGA01. Plasmid pMPM-K4
contains an optimized Shine-Dalgarno sequence upstream of an NcoI site. To clone xcpT in the NcoI site, the gene was PCR amplified with primers pJAXcpTfor03 (5'-CGTGGGGTAATCCCATGGATCAGAGCCGC-3') and pJAXcpTrev01. Underlined is the NcoI site that replaces the original GTG start codon. Replacement of the start codon also led to the substitution of an aspartic acid for an asparagine at the second residue in XcpT. The PCR product was cloned into pCRII-TOPO, which resulted in pCR-XcpT1-3. The NcoI-BamHI fragment of pCR-XcpT1-3 and the BamHI-XbaI fragment of pYRC-A were ligated into NcoI-XbaI-digested pMPM-K4
, resulting in the construct pJGA07. To obtain pT7-T, xcpT as an 850-bp BssH2 fragment from pAX24 was first introduced into SmaI-digested pUC19, resulting in pUX4. Subsequently, the gene was cloned as a KpnI-PstI fragment into KpnI-PstI-digested pSPT19, which resulted in pSX4, and finally, the EcoRI-BamHI fragment from pSX4 was ligated into pT7-6. In construct pT7-T, xcpT expression is under the control of the
10 promoter. Construct pGP1.2A is a derivative of pGP1.2 that contains xcpA introduced as a PstI fragment from pUP2. For construct pJGA03, lacZ was PCR amplified from pUR292 with primers PB3 (5'-CACAGGAAACAGGATCCACCATGATTACGG-3'), which replaces the start codon with a BamHI site (underlined), and PB4 (5'-GGCTCGAGGTCTAGATTACCCCTGACACC-3'), containing an XbaI site (underlined). The resulting product was cloned into pCRII-TOPO. The insert was subsequently excised by BamHI-XbaI digestion and introduced into BamHI-XbaI-digested pJGA01, replacing phoA with lacZ. |
View this table: [in a new window] |
TABLE 2. Plasmids used in this study
|
SDS-PAGE and immunoblot analysis. Bacterial cells were suspended in SDS-polyacrylamide gel electrophoresis (PAGE) sample buffer (2% SDS, 5% ß-mercaptoethanol, 10% glycerol, 0.02% bromophenol blue, 0.1 M Tris-HCl, pH 6.8). Extracellular proteins were precipitated using 5% trichloroacetic acid (TCA) and washed with acetone. The amounts of proteins loaded were equivalent to an OD600 of 1 of bacterial cells. Samples were heated for 10 min at 95°C and separated on SDS-PAGE gels (8% gels for XcpT-LacZ, 11% gels for XcpT-PhoA, and 14% gels for XcpT). Proteins were stained with Coomassie brilliant blue or transferred to nitrocellulose membranes by semidry electroblotting for immunodetection. The primary antisera used were anti-XcpT at 1:1,000 and anti-PhoA and anti-LacZ at 1:10,000 dilutions. Either alkaline phosphatase- or peroxidase-conjugated goat anti-rabbit immunoglobulin G antibodies (Biosource International) were used as secondary antibodies. Detection of the latter was performed with chemiluminescence (Pierce). In the case of pulse-labeled samples, polyacrylamide gels were incubated in Amplify (Amersham) after electrophoresis, vacuum dried, and exposed to X-ray films at 80°C.
Pulse-labeling experiments. E. coli cells carrying plasmid pT7-T in combination with either pGP1.2 or pGP1.2A were grown overnight at 30°C in M9-Casamino Acids medium (M9 salts [42] supplemented with 1% Casamino Acids, 0.2% glucose, 1 mM MgSO4, and 0.0001% thiamine). Overnight cultures were diluted to an OD600 of 0.3 in M9 medium supplemented with all amino acids except for methionine and cysteine (all at 0.12%, except aspartic acid, glutamic acid, and tyrosine at 0.05% and tryptophan at 0.01%) and grown for 2.5 h. Then, cells were incubated at 42°C for 60 min to induce the synthesis of T7 RNA polymerase, as well as the sec phenotype in the case of strains MM52 and IQ85. Cells were pelleted and resuspended in one-fifth of the original volume of the growth medium. Samples were pulse-labeled for 1 min with 3 µCi Redivue L-[35S]methionine (Amersham) at 42°C. Incorporation of label was stopped by placing the samples on ice and by rapidly adding one volume of a solution of 10% TCA.
Immunoprecipitation. After removal of TCA from the pulse-labeled samples by washing with acetone, the pellets were dissolved in SDS buffer (2% SDS, 50 mM Tris-HCl [pH 8.0], 1 mM EDTA) and incubated for 10 min at 100°C. Subsequently, Triton buffer (2% Triton X-100, 50 mM Tris-HCl [pH 8.0], 0.15 M NaCl) was added and insoluble material was removed by centrifugation. Polyclonal antiserum was added, and after 3 h of incubation at room temperature, protein A CL-4B Sepharose beads (Amersham) were added. After incubation for 1 h at room temperature under gentle rocking, immunocomplexes were collected by centrifugation and washed with Triton buffer. Boiling for 10 min in SDS-PAGE sample buffer eluted antigens from the Sepharose beads.
Proteinase K accessibility. Cells carrying plasmid pJGA07 were grown as described in the pulse-labeling experiments. After 1.5 h of growth, arabinose was added to a final concentration of 0.01% to induce XcpT-PhoA expression. After 1 h of induction, the cells were incubated for 1 h at 42°C to induce the sec phenotype. Pulse-labeling was performed as described above. Directly after the pulse-labeling, an excess of nonradioactive methionine/cysteine was added, and the cells were collected by centrifugation. For conversion to spheroplasts, cells were resuspended in ice-cold buffer A (40% [wt/vol] sucrose, 1.5 mM EDTA, 33 mM Tris-HCl [pH 8.0]) and incubated with lysozyme (final concentration, 5 µg/ml). After 10 min on ice, incubation was continued at 37°C for 10 min, followed by the addition of 10 mM MgCl2. Aliquots of the spheroplast suspension were incubated on ice for 1 h in the presence or absence of proteinase K (final concentration, 50 µg/ml). Subsequently, 2 mM phenylmethylsulfonyl fluoride was added to the cell suspension and incubation was continued for 5 min on ice. Proteins were precipitated with 5% TCA and analyzed by SDS-PAGE and autoradiography.
Cell fractionation.
Overnight cultures of DH5
carrying pJGA03 were diluted into fresh, prewarmed LB medium to an OD600 of 0.15 and grown for 2 h at 37°C with shaking at 200 rpm. Subsequently, IPTG was added to a final concentration of 1 mM. After 90 min of incubation, the cells were harvested and spheroplasts were prepared as described previously (38). After the spheroplasts were pelleted by centrifugation, the supernatant was kept as the periplasmic fraction. The spheroplasts were washed in 0.9% NaCl, resuspended in 2 mM EDTA-50 mM Tris-HCl (pH 8.5), and frozen at 20°C. After being thawed, they were disrupted by sonication and the membranes were collected by centrifugation for 1 h at 150,000 x g at 4°C. The supernatant contained the cytoplasmic proteins.
|
|
|---|
T, and immunoblot analysis with an antiserum directed against PhoA confirmed production of XcpT-PhoA (Fig. 1A). Some breakdown products migrating at the same position as wild-type PhoA were detected as well. Remarkably, based on halo formation on elastin plates (Fig. 1B) and analysis of extracellular proteins (data not shown), the fusion protein appeared to restore the secretion of the Xcp substrate elastase in the xcpT mutant strain, indicating that the PhoA moiety did not interfere with the functionality of the protein.
![]() View larger version (54K): [in a new window] |
FIG. 1. Production and functionality of XcpT-PhoA fusion protein. (A) Immunoblot analysis of whole-cell extracts of P. aeruginosa strain PAO25 and an xcpT mutant, PAO1 T, expressing XcpT-PhoA from pJGA01 or containing the vector pYRC-A. Immunodetection was carried out with PhoA-specific antibodies. The position of XcpT-PhoA is indicated by an arrow. Total cell lysate of E. coli strain C9 constitutively producing PhoA (indicated by an asterisk) was included for reference. (B) PAO25 and PAO1 T expressing XcpT-PhoA from pJGA01 or containing the vector pYRC-A were grown on LB agar containing 1% elastin. Secretion of elastase is visualized by clearance of elastin around the colonies.
|
hxc
pilAC
R). This strain still showed alkaline phosphatase activity, similar to that of the xcp deletion strain (Fig. 2). Hence, inner membrane passage of XcpT-PhoA can occur independently of the Xcp, Hxc, and Pil systems.
![]() View larger version (22K): [in a new window] |
FIG. 2. Enzyme activity of XcpT-PhoA in P. aeruginosa. Alkaline phosphatase activities were measured in P. aeruginosa strains expressing XcpT-PhoA from pJGA01 or containing the vector pYRC-A. The strains used were the wild-type strain PAO25; strain D40ZQ, which lacks the xcp cluster; and strain PAO hxc pilAC R (Triple), which lacks hxcP to hxcZ, pilA to pilC, and xcpR. The alkaline phosphatase activity in AP units was calculated as OD420 x 1,000/reaction time (min) x culture volume (ml) x OD600. The bars represent the averages of three independent assays, and standard deviations are indicated.
|
![]() View larger version (18K): [in a new window] |
FIG. 3. Enzyme activity of XcpT-PhoA is dependent on SecY in E. coli. Alkaline phosphatase activities were measured in the temperature-sensitive secY mutant strain IQ85 and its parent, IQ86, both expressing XcpT-PhoA from pJGA07. Activities were measured in cultures incubated for 2.5 h at 30°C (white bars) or at 42°C (gray bars). The alkaline phosphatase activity in AP units was calculated as OD420 x 1,000/reaction time (min) x culture volume (ml) x OD600. The bars represent the averages of three independent assays, and standard deviations are indicated.
|
PL promoter and the cI857 gene encoding a temperature-sensitive
repressor, or with pGP1.2A, which additionally contains xcpA. These constructs were introduced into the temperature-sensitive secA and secY mutant strains MM52 and IQ85, respectively, and their cognate parental strains. To induce the synthesis of T7 RNA polymerase and the Sec phenotype, cells were shifted to 42°C for 1 h before pulse-labeling was performed. In these experiments, processed XcpT was detected only upon coexpression of XcpA (data not shown). In the XcpA-expressing parental strains, MC410 and IQ86, processing of the pseudopilin XcpT was nearly complete after 1 min of pulse-labeling (Fig. 4). However, the maturation of XcpT was clearly reduced in the secA and secY mutants, which shows that its processing requires a functional Sec translocase.
![]() View larger version (105K): [in a new window] |
FIG. 4. Inhibitory effect of sec mutations on XcpT processing. XcpT was expressed from plasmid pT7-T in E. coli strains MC4100 and IQ86 and their isogenic, temperature-sensitive secA and secY mutants MM52 and IQ85, respectively, both coexpressing XcpA from pGP1.2A. After being pulse-labeled at 42°C and immunoprecipitated with anti-XcpT, samples were analyzed by SDS-PAGE, followed by autoradiography. The locations on the autoradiogram of mature XcpT and its precursor are indicated by m and p, respectively. WT, wild type.
|
![]() View larger version (51K): [in a new window] |
FIG. 5. Proteinase K accessibility of XcpT-PhoA and OmpA in spheroplasts. (A) Cultures of temperature-sensitive secA and secY mutants MM52 and IQ85, respectively, and their parental strains, MC4100 and IQ86, were induced for XcpT-PhoA expression from pJGA07 and incubated at the restrictive temperature. Cells were subsequently pulse-labeled with [35S]methionine, converted to spheroplasts, and where indicated (, absent; +, present), treated with proteinase K (prot K). After immunoprecipitation with anti-PhoA serum, samples were analyzed by SDS-PAGE, followed by autoradiography. Because of the large size of XcpT-PhoA ( 65 kDa), removal of the short XcpT leader peptide during processing is not visible as a mobility shift. (B) The same samples were also used for immunoprecipitation with anti-OmpA serum. Samples were analyzed by SDS-PAGE and autoradiography. The locations on the autoradiogram of mature OmpA and its precursor are indicated by m and p, respectively.
|
resulted in a Lac phenotype, as indicated by the white-colony phenotype on plates containing the ß-galactosidase substrate X-Gal (Fig. 6A), even after two days of incubation. Immunoblot analysis with antisera against LacZ and XcpT revealed that the fusion protein was produced (Fig. 6B), although the majority was detectable as a smaller degradation product recognized only by the LacZ antibodies. The degradation product was not always observed (see Fig. 7B) and probably reflects degradation during sample preparation. However, the appearance of the degradation product allowed us to determine the localization of XcpT-LacZ. Cell fractionation showed that the fusion protein was associated with the membranes (Fig. 6B), whereas the degradation product corresponding to the LacZ part was found mostly in the periplasmic fraction, showing that the fusion protein is transported over the inner membrane. DH5
cells carrying pJGA03 were not sensitive to induction of the expression of the chimeric gene with IPTG. The efficient export of the XcpT-LacZ fusion protein across the inner membrane without jamming the Sec pathway is consistent with cotranslational targeting via the SRP pathway. To further substantiate this conclusion, pJGA03 was introduced into MC1060 and its derivatives containing the SRP mutant alleles ffs-69 (50) and ffh-87 (51), which confer mild defects on SRP-dependent secretion. The strains with the SRP mutant alleles formed light blue colonies on X-Gal-containing plates, while the parental strain remained white (Fig. 6A), showing that the SRP mutations interfere with efficient translocation of XcpT-LacZ to the periplasm. This effect was quantified by measuring ß-galactosidase activity. As shown in Fig. 7A, the strains with the mutant alleles displayed a fivefold increase in ß-galactosidase activity compared to that in the wild-type strain, whereas the production of XcpT-LacZ was the same in all the strains (Fig. 7B). These results underscore the SRP dependency of XcpT targeting to the Sec translocon. To test the effect of YidC on the translocation of XcpT-LacZ, pJGA03 was introduced into strain JS7131, which carries a ParaBAD-yidC operon. No effects on ß-galactosidase activities were measured upon the removal of arabinose, which results in YidC depletion (43; data not shown).
![]() View larger version (66K): [in a new window] |
FIG. 6. XcpT-LacZ production and localization in E. coli. (A) E. coli strains DH5 and MC1060 and MC1060 derivatives with alleles ffs-69 and ffh-87 producing XcpT-LacZ from pJGA03 were grown overnight on LB plates with X-Gal. White colonies correspond to a Lac phenotype and blue colonies to a Lac+ phenotype. (B) DH5 cells carrying pJGA03 were induced for the expression of XcpT-LacZ, and whole-cell extracts or cell fractions were analyzed by SDS-PAGE and Western blotting. Immunodetection was performed with antibodies against LacZ and XcpT. The positions of XcpT-LacZ and of LacZ are indicated with an arrowhead and an asterisk, respectively. p, periplasmic fraction; m, membrane fraction; c, cytoplasmic fraction; wc, whole-cell extract; b, whole-cell extract of plasmidless DH5 cells (the weak band detected by the anti-LacZ serum in this extract likely corresponds to the inactive LacZ M15 protein encoded from the chromosome [31]).
|
![]() View larger version (46K): [in a new window] |
FIG. 7. XcpT-LacZ production in the presence of mutant SRP alleles. (A) ß-Galactosidase activity (in Miller units) of cells grown on LB plates. The activity values represent the means of results from four independent experiments, with standard deviations indicated in parentheses. The values of ß-galactosidase activity are normalized against the wild-type strain and given as percentages. (B) Immunoblot analysis of whole-cell lysates of E. coli strain MC1060 and MC1060 derivatives with alleles ffs-69 and ffh-87, producing XcpT-LacZ from pJGA03. Immunodetection was carried out with LacZ-specific antibodies. The position of XcpT-LacZ on the immunoblot is indicated by an arrowhead.
|
|
|
|---|
However, our conclusion that the pseudopilin XcpT is not transported via accessory Xcp proteins is consistent with the observation that a mutant of the archaeon Sulfolobus solfataricus in which the genes encoding the accessory ATPase (homologue of XcpR) and the integral inner membrane component (homologue of XcpS) are deleted is not affected in its ability to insert sugar-binding proteins with prepilin-like N termini into the membrane (B. Zolghadr, personal communication). Moreover, although pilins and pseudopilins are unable to functionally replace each other, it is possible to exchange their leader peptides and hydrophobic domains without loss of function (29). Even in P. aeruginosa, where the Pil and Xcp systems function side by side, the N termini of PilA and XcpT could be exchanged without affecting function (our unpublished results). Thus, apparently, the N termini do not contain the information for the targeting of the (pseudo)pilins to the cognate machinery, which is in agreement with the export of these proteins via a general route. An explanation for the aforementioned results described by Kagami et al. (27) and Chung and Dubnau (9) might be offered by the possibility that the accessory proteins, although not required for the transport of the pseudopilins across the inner membrane, are required for their assembly into a pilus-like structure (16, 44). In the case of ComGC, translocation was assayed in NaOH solubility studies and it is conceivable that this method distinguishes ComGC assembled in a pilus-like structure from membrane-embedded ComGC rather than showing translocation.
Since the N termini of (pseudo)pilins to a certain degree resemble Sec signal sequences, we reasoned that inner membrane translocation of XcpT would occur via the Sec machinery. The involvement of the Sec translocon was studied in the heterologous host E. coli. In a temperature-sensitive secY mutant, translocation of XcpT-PhoA was blocked at the restrictive temperature, indicating that indeed the Sec pathway is involved. The requirement for SecA and SecY in XcpT transport could also be demonstrated in pulse-labeling experiments. Both XcpT processing and protease accessibility were affected in the secA and secY mutants at the restrictive temperature. Maturation of XcpT in these experiments was strictly dependent on the presence of the P. aeruginosa prepilin peptidase XcpA. Nonetheless, immunoblot analysis with anti-XcpT serum of extracts of E. coli cells expressing XcpT grown overnight showed partial processing (unpublished observation). Apparently, previously described E. coli prepilin peptidase homologues (22, 54) are functional, but their ability to process XcpT was not sufficiently efficient to be detected in the short pulse-labeling experiments. These experiments showed that processing of the pseudopilin occurs after transport, despite the fact that the prepilin peptidase has its active center at the cytoplasmic side of the inner membrane (32). Apparently, membrane insertion of XcpT is required to expose its processing site accurately to the XcpA peptidase.
In order to distinguish between targeting via the SecB or the SRP route, XcpT was fused to the reporter LacZ, which was previously shown to be a useful reporter for this purpose (5). This fusion protein was efficiently transported to the periplasm without jamming the Sec translocon, consistent with cotranslational transport via the SRP pathway. Moreover, efficient inner membrane translocation of the XcpT-LacZ fusion was dependent on fully functional Ffh and Ffs, but not on YidC. Taken together, our results demonstrate that XcpT is targeted to the Sec system via the SRP route, which is common for inner membrane proteins. The precise requirements for SRP signals are still not completely clear, but hydrophobicity and secondary structure have been shown to be important determinants (1, 5, 33). Indeed, the N termini of prepilins are highly hydrophobic and contain an extended N-terminal
-helix. Since pseudopilins have a high tendency to associate (40), cotranslational translocation may be important to circumvent premature interactions.
This report shows for the first time the Sec and SRP dependency of a pseudopilin for its export. Given the strong conservation of their N-terminal sequences, it is likely that other pilins and pseudopilins also use the SRP/Sec pathway. Indeed, similar conclusions were reached by Francetic et al. in the accompanying paper on the export of the pseudopilin PulG of the type II secretion system of Klebsiella oxytoca (21). We propose that, after translocation, the (pseudo)pilins leave the Sec translocon laterally, after which they become recruited by their cognate machinery. The polytopic inner membrane component will subsequently act as a platform for the assembly of the subunits into a piluslike structure, using the energy provided by the ATPase.
This work was supported by the Research Council for Earth and Life Sciences (ALW) and by financial aid from The Netherlands Organization for Scientific Research (NWO) (grant 810-35-002) and the European Union project NANOFOLDEX (grant QLK3-CT-2002-0286).
Published ahead of print on 15 December 2006. ![]()
|
|
|---|
This article has been cited by other articles:
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Copyright © 2009 by the American Society for Microbiology. For an alternate route to Journals.ASM.org, visit: http://intl-journals.asm.org | More Info»