Previous Article | Next Article ![]()
Journal of Bacteriology, April 2007, p. 3072-3080, Vol. 189, No. 8
0021-9193/07/$08.00+0 doi:10.1128/JB.01772-06
Copyright © 2007, American Society for Microbiology. All Rights Reserved.

Department of Microbiology, University of Georgia, Athens, Georgia 30602
Received 21 November 2006/ Accepted 5 February 2007
|
|
|---|
/ß hydrolases, and GDSL lipases. One member of each family was characterized. The protein encoded by MXAN_3852 contains motifs characteristic of patatins. MXAN_5522 encodes a protein with the G-X-S-X-G motif characteristic of the lipase subfamily of
/ß hydrolases. MXAN_4569 encodes a member of the GDSL family of lipolytic enzymes. Strains with deletions of MXAN_5522 and MXAN_4569 undergo faster development and earlier myxospore formation than the wild-type strain. The MXAN_5522 mutation results in spore yields substantially higher than those seen for wild-type cells. Gene expression analysis using translational lacZ fusions indicates that while all three genes are expressed during development, only MXAN_5522 and MXAN_4569 are expressed during vegetative growth. The proteins encoded by these genes were overexpressed using a T7 RNA polymerase transcription (pET102/D-TOPO) system in Escherichia coli BL21 Star (DE3) cells. The substrate specificities of the purified enzymes were investigated using p-nitrophenyl esters with chain lengths from C2 to C16. These enzymes preferentially hydrolyzed esters of short-chain fatty acids, yielding the highest activity with p-nitrophenyl acetate. |
|
|---|
Proteobacteria in that they have a highly social life cycle. Myxococcus xanthus, like other myxobacteria, glides on surfaces either as single cells or, more typically, in groups feeding cooperatively. When nutrients are depleted, approximately 100,000 cells aggregate to form a multicellular fruiting body. Inside the fruiting bodies, the long, thin vegetative rods differentiate into ovoid myxospores with a thick coat that are resistant to prolonged starvation, desiccation, and high temperatures. Spores germinate when nutrients become available (for reviews, see references 16, 17, and 60). Development requires the exchange of signals (59) and the expression of a large number of genes (24, 29, 34, 35). Some of the signaling pathways have been described previously; others remain to be elucidated.
Lipids play a central role in the M. xanthus life cycle. Lipids containing the fatty acid c16:1
5c are among the most abundant lipids in M. xanthus but are rare in other bacteria (12). They are chemoattractants and may play a role in development (32). Branched-chain fatty acids also appear to play a role in development (15). Lipids containing the fatty acid c18:1
9c are not found in M. xanthus (12) and appear to serve as chemoattractants for detecting prey bacteria. Fatty acids are consumed for carbon and energy during growth (37) along with protein that is locked in the prey cytoplasm. M. xanthus may remove the membrane barrier with lipolytic enzymes that not only release fatty acids but empty the cytoplasmic contents of the prey.
Lipases (triacylglycerol acylhydrolases; EC 3.1.1.3) and esterases (carboxylic ester hydrolases; EC 3.1.1.1), collectively known as "lipolytic enzymes," hydrolyze hydrophobic carboxylic acid esters, liberating fatty acids and glycerol. Esterases act on water-soluble substrates with a preference for short fatty acid chains, whereas lipases work at the water-lipid interface, and their major substrates are long-chain triacylglycerols (4, 26). Lipases from Candida, Pseudomonas, Bacillus, and Rhizopus have been extensively studied for biotechnology (47). In addition to their role in catalyzing ester hydrolysis, lipases function as biocatalysts for transesterification, alcoholysis, acidolysis, and aminolysis reactions and are widely used in the food, detergent, chemical, and biochemical industries (47). Lipases and phospholipases secreted by pathogenic microorganisms are virulence factors in animals (13) and plants (66). The colonization and persistence by Propionibacterium acnes may be enhanced by a lipase that hydrolyzes triacylglycerides on human skin (21).
Esterases, like lipases, are found in animals, plants, and microorganisms (45). The physiological functions of bacterial esterases are less clear, although some may be involved in plant pathogenicity, carbon source provision, and biocide detoxification (33). Nevertheless, esterase enzymes play important roles as catalysts in biotechnology. In addition to ester hydrolysis, esterases catalyze interesterification, aminolysis, and peracid formation (8, 18). These biochemical reactions are used in the pharmaceutical and food industries (18).
The three-dimensional structures of some lipases and esterases show a characteristic
/ß hydrolase fold, with a central, predominantly parallel ß-sheet flanked by
-helical connections (8). For this reason, these enzymes have been classified as members of a large superfamily called the
/ß hydrolase superfamily (41, 46). Esterase and lipase members of the superfamily also share a characteristic sequence motif, G-X-S-X-G, called the nucleophilic elbow (41, 46). The serine residue in this motif constitutes a catalytic triad with aspartate and histidine residues that are placed in this specific order (i.e., serine-aspartate-histidine). Recently, several other sequence motifs have also been found with this superfamily (4, 57).
Some lipases and esterases do not exhibit the conventional pentapeptide G-X-S-X-G but rather display a G-D-S-(L) [Gly-Asp-Ser-(Leu)] consensus sequence containing the active-site serine residue (4). These enzymes have an
/ß-tertiary fold that differs substantially from the
/ß hydrolase fold (8). Unlike the common lipases, GDSL enzymes do not have the nucleophilic elbow (1). GDSL enzymes have five consensus sequence blocks (I to V) and four invariant catalytic residues, Ser, Gly, Asn, and His, in blocks I, II, III, and V, respectively (1).
A new family of bacterial lipolytic enzymes, called patatin-like proteins, has recently been proposed (5). Patatin is the major soluble storage protein in potato tubers. This protein displays lipid acyl hydrolase and acyl transferase activities (2, 48, 52). The role of patatin in potato tubers remains unclear. It has been speculated that the lipase activity might confer resistance to pathogens (23). Patatin homologues are highly represented in some animal pathogen and plant pathogen/symbiont genomes, suggesting that they confer an advantage (5).
In spite of the fact that lipids have a prominent role in the M. xanthus life cycle, there have been few attempts to examine them in detail (61). The recent completion of the M. xanthus genome sequence (20) enables a comprehensive examination of putative lipase genes beginning with a bioinformatics approach. M. xanthus has a large number of putative lipase genes in three main families: patatin lipases,
/ß hydrolases, and GDSL lipases. In this work, we focused on one member of each family. The phenotypes of deletion strains are characterized, gene expression is examined, and the proteins, expressed in Escherichia coli, are characterized in vitro.
|
|
|---|
|
View this table: [in a new window] |
TABLE 1. Bacterial strains and plasmids used in this study
|
|
View this table: [in a new window] |
TABLE 2. Oligonucleotides used in this study
|
Sporulation assay. M. xanthus cells were grown in CYE broth to approximately 5 x 108 cells ml1 and concentrated to 1 x 1010 cells ml1 in CYE broth. Five drops of 10 µl each were spotted on CF or TPM agar and incubated at 32°C. At different times, the fruiting bodies of one plate were harvested, resuspended in 250 µl of TPM buffer, heated at 50°C for 2 h, and then sonicated at a 40% duty cycle for 4x 5 s on an ultrasonic processor (Heat Systems-Ultrasonic) to kill vegetative cells. Spore production was determined by direct count of refractile myxospores with a Petroff-Hausser counting chamber.
Predation assay. Strains DK1622, LS2500, LS201, and LS2502 were grown in CYE broth to approximately 5 x 108 cells ml1 and diluted to 1 x 108 cells ml1 in CYE broth. E. coli was grown to 1 x 109 cells ml1. M. xanthus cells were mixed with E. coli cells at a ratio of 1 to 10. Ten drops of 20 µl each were spotted on TPM agar and incubated at 32°C for 5 h. Cells were removed from TPM and suspended in 2% glutaraldehyde for 12 h or more. Glutaraldehyde-fixed cells were subjected to sonic oscillation for 30 seconds to disrupt cell clumps, and the cells were counted in a Petroff-Hausser counting chamber. Cell size and morphology were used to distinguish M. xanthus cells from E. coli cells.
Construction and assay of strains harboring translational lacZ fusions. The lacZ fusion plasmids were constructed using vector pKY481 (11). By use of Pfu polymerase (Stratagene), fragments encompassing the upstream MXAN_3852, MXAN_5522, and MXAN_4569 regions were amplified from wild-type chromosomal DNA by use of oligonucleotide pairs 3852ZKpn-3852ZBam, 5522ZKpn-5522ZBam, and 4569ZKpn-4569ZBam, respectively (Table 2). The BamHI site in the primers was introduced at the start codon of the genes and in frame with the BamHI site existing in the lacZ gene of plasmid pKY481. PCR products were digested with KpnI and BamHI and ligated to vector pKY481 digested with the same enzymes. The resulting plasmids, pAMM18 (MXAN_3852-lacZ), pAMM19 (MXAN_5522-lacZ), and pAMM20 (MXAN_4569-lacZ), were introduced into M. xanthus wild-type cells by electroporation to generate kanamycin-resistant transformants. The resultant strains harboring the fusions, LS2530 (MXAN_3852-lacZ), LS2531 (MXAN_5522-lacZ), and LS2532 (MXAN_4569-lacZ), were confirmed by PCR analysis.
Strains LS2530, LS2531, and LS2532 were grown in CYE broth to approximately 5 x 108 cells ml1 and concentrated to 8 x 109 cells ml1 in TM buffer (10 mM Tris-HCl [pH 7.6], 1 mM MgSO4). For preparation of cell extracts during development, 200 µl of concentrated cultures was spotted on TPM and CF agar and incubated at 32°C. At different times, fruiting bodies were harvested, resuspended in 200 µl of glass beads equilibrated in TM buffer, and sonicated as described previously (40). Cell debris and glass beads were removed by centrifugation. Preparation of cell extracts during vegetative growth followed the same procedure except for the use of CYE agar and the absence of glass beads during sonication. The amounts of protein in the supernatants were determined by using the Bio-Rad protein assay (Bio-Rad, Inc.) with bovine serum albumin as a standard. ß-Galactosidase activity was determined as described by Kroos et al. (35). Specific activity is expressed as nmol of o-nitrophenol produced per min per mg of protein. The results are the averages of three different experiments.
Expression of lipolytic enzymes in E. coli. For high-level expression of MXAN_3852, MXAN_5522, and MXAN_4569 in E. coli, the genes were PCR amplified with the primer pairs pET3852_5'-pET3852_3', pET5522_5'-pET5522_3', and pET4569_5'-pET4569_3', respectively (Table 2). In all the cases, the forward primers contained CACC at their 5' termini for cloning in the correct orientation with the pET102/D-TOPO (Invitrogen) expression vector. The purified PCR products were cloned in the vector according to the manufacturer's instruction, used to transform E. coli TOP10 competent cells, and plated on LB agar plates (100 mg ml1 ampicillin). The resultant plasmids harboring the correct constructions, pAMM11 (pET with MXAN_3852), pAMM12 (pET with MXAN_5522), and pAMM15 (pET with MXAN_4569), were free of nucleotide substitutions. The recombinant plasmids were transformed into the expression strain E. coli BL21 Star (DE3) (Invitrogen). The fusion proteins were expressed as follows. Transformed BL21 Star (DE3) cells were grown in LB medium (containing 100 µg ml1 ampicillin) on a rotary shaker (250 rpm) at 37°C until the optical density at 600 nm reached 0.5 to 0.7. Fifteen minutes before induction, the flasks were shifted to 15°C. Induction was performed by the addition of 1 mM of isopropyl-ß-D-thiogalactopyranoside (IPTG). Induced cultures were incubated with shaking at 15°C for 6 h in the case of pET with MXAN_3852 and for 24 h in the case of pET with MXAN_5522 and pET with MXAN_4569 before the cells were harvested.
Purification of recombinant proteins. Recombinant proteins were purified using the ProBond purification system (Invitrogen). Briefly, the bacterial pellets were resuspended in 8 ml of native binding buffer (50 mM NaH2PO4, 0.5 M NaCl [pH 8.0]), 1 mg ml1 lysozyme, incubated on ice for 30 min before sonication, and cleared by centrifugation. The supernatants were then incubated for 1 h with ProBond nickel-chelating resin (Invitrogen). After being washed with 16 column volumes of native wash buffer (50 mM NaH2PO4, 0.5 M NaCl, 20 mM imidazole [pH 8.0]), bound proteins were eluted with native elution buffer containing 100, 300, or 500 mM imidazole (50 mM NaH2PO4, 0.5 M NaCl, with 100 mM, 300 mM, or 500 mM imidazole [pH 8.0], respectively). Fractions eluting with 300 mM imidazole were used in this work.
Western blot analysis. Purified recombinant enzymes were separated by 12.5% sodium dodecyl sulfate-polyacrylamide gel electrophoresis. The proteins were transferred onto nitrocellulose for Western blotting. The primary antibody was HisProbe-HRP (Pierce) and was used at a 1:5,000 dilution according to the manufacturer's instructions. The immunoblot was developed with an ECL luminescence detection kit (Amersham Pharmacia, Piscataway, NJ).
Determination of lipolytic activity. Recombinant proteins were assayed using p-nitrophenyl (pNP) esters of fatty acids (Sigma) as substrates (50). The purified enzymes were added to a mixture containing 0.4 mM pNP ester, 2% Triton X-100, and 50 mM phosphate buffer (pH 7.0) and incubated at 37°C for 1 h. The release of pNP was measured spectrophotometrically at 405 nm. One unit of lipolytic activity was defined as the amount of enzyme that caused an increase of 0.01 absorbance units at 37°C for 1 h. Protein concentrations were determined using a bicinchoninic acid protein assay (Pierce). Activities on each substrate are expressed as the percentage of activity with pNP acetate (C2), which was taken as 100%.
|
|
|---|
/ß hydrolases, and GDSL lipases. Specifically, the M. xanthus genome contains 7 open reading frames (ORFs) that encode patatin-like lipases, 25 ORFs that encode
/ß fold family members, and 4 ORFs that encode GDSL-like lipases. One member of each family was examined in detail. Sequence analyses of MXAN_3852, MXAN_5522, and MXAN_4569. MXAN_3852 encodes a 314-amino-acid protein. The start codon was chosen based on codon usage (25) and the presence of a putative ribosome-binding site (AGGAGG) 6 bases upstream. This protein lacks both predicted signal peptide and transmembrane domains. BLAST (55) results indicate homology with patatin lipases, members of a multigene family of plant vacuolar glycoproteins. Patatins represent 40% of total soluble potato tuber protein (49) and, while considered to be storage proteins, show lipid acyl hydrolase activity (2), possibly as a defense against plant parasites (62). Potato patatin B2 and human cytosolic phospholipase A2 share conserved domains of protein homology (23), including an active-site dyad instead of the more common Ser-His-Asp (or Glu) triad of lipolytic enzymes (53, 56).
Bacterial patatin-like proteins possess four conserved domains (blocks I to IV) similar to those in potato patatin B2 (5). All these conserved domains are present in the MXAN_3852 protein (Fig. 1A). Block I consists of a glycine-rich region with a conserved Arg or Lys (Lys16 in the MXAN_3852 protein) residue, which probably serves as an oxyanion hole. Block II is located in proximity to block I (about 10 to 20 amino acids away) and comprises the hydrolase motif G-X-S-X-G with the putative active-site Ser (Gly40-X-Ser42-X-Gly44) (56). Block III contains a conserved Ser (Ser144), which may be an important structural element due to the capacity to form hydrogen bonds or serve as a potential phosphorylation site. The adjacent highly conserved Pro residues (in blocks III and IV) (Pro148 and Pro153) may be important for the proper conformation of the protein. Block IV contains the active-site Asp (Asp161) residue that forms the catalytic Ser-Asp dyad.
![]() View larger version (31K): [in a new window] |
FIG. 1. Protein sequence alignments of conserved blocks of Myxococcus xanthus enzymes. (A) Alignment of the M. xanthus MXAN_3852 protein with conserved patatin domains. (B) Comparison of the MXAN_5522 protein with characterized /ß hydrolases. (C) Alignment of the MXAN_4569 protein with GDSL enzymes. Shown on gray and black backgrounds are identical amino acids, and functionally similar amino acids are shown in black letters. Residues necessary for catalytic activity are shown on a black background. The numbers between blocks indicate the numbers of amino acids preceding or following the conserved blocks.
|
/ß hydrolases, enzymes with a catalytic triad usually formed by Ser, His, and Asp residues (46). In the amino acid sequences of
/ß hydrolases, the three conserved residues follow the order Ser-Asp-His. The serine residue is common to both the pentapeptide and the catalytic triad (4). MXAN_5522 encodes a Gly-His-Ser-His-Gly sequence (positions 105 to 109) (Fig. 1B), which matches with the consensus sequence conserved in the active center of lipases. In addition, some functionally important residues are strictly conserved in the MXAN_5522 protein, such as residues Cys208 and Cys259, which form a disulfide bond, two conserved Asp residues for coordinating a Ca2+ ion (Asp235 and Asp277), and the catalytic triad Ser107 Asp253 His275 (Fig. 1B).
The MXAN_5522 protein has significant identity to triacylglycerol lipases from organisms such as Pseudomonas aeruginosa, Acinetobacter calcoaceticus, and Burkholderia cepacia. Triacylglycerol lipases cleave ester bonds on all three glycerol sn positions. Bacterial
/ß hydrolases are divided into two evolutionarily distinct classes on the basis of the codon for the active-site serine, which can be either AGY or TCN (3). The MXAN_5522 protein belongs to the first group; the catalytic serine corresponds to the codon AGC. This first group is further divided into four subgroups (26) based on the mechanism of secretion and, more interestingly, the presence of a lipase chaperone gene next to the lipase gene. The chaperone functions in folding the lipase in the periplasm. The first subgroup is characterized by Xcp-dependent secretion and the presence of the lipase chaperone in an operon with the lipase gene itself. The MXAN_5522 protein likely falls into this first subgroup, as MXAN_5523 encodes a lipase chaperone separated by 27 base pairs from MXAN_5522. Separation between lipase genes and their cognate chaperones of up to 35 base pairs is common (63). The M. xanthus lipase and lipase chaperone both have predicted signal secretion sequences, and the lipase chaperone has a predicted transmembrane helix at the N terminus, used to anchor lipase chaperones to the inner membrane.
MXAN_4569 encodes a 424-amino-acid protein. The start codon was chosen based on codon usage and the presence of a putative ribosome-binding site (GGGAGGAA) 5 bases upstream of the ATG. A putative signal peptide cleavage site is located between Ala20 and Cys21. The MXAN_4569 protein shows similarities to GDS(L) lipases, a family of bacterial esterases with varied properties (10). GDS(L) proteins are characterized by a Gly-Asp-Ser-(Leu) [G-D-S-(L)] (Gly241-Asp-242-Ser243 in MXAN_4569) (Fig. 1C) motif containing the active-site serine residue in block I (4). Recently, a subgroup of this GDS(L) family was further classified as an SGNH hydrolase due to the presence of four strictly conserved residues, Ser, Gly, Asn, and His, in four conserved blocks, blocks I, II, III, and V, respectively (1). Each of the four residues plays a key role in the catalytic function of the enzyme. The catalytic Ser in block I (Ser243) serves as a nucleophile and a proton donor to the oxyanion hole. The Gly residue in block II (Gly278) and the Asn in block III (Asn308) serve as the proton donors to the oxyanion hole. The His residue in block V (His401) acts as a base to make the active-site Ser more nucleophilic by deprotonating the hydroxyl group. Another feature in block V is the presence of Asp (Asp398) located at the third amino acid preceding His (His401) (i.e., Asp-X-X-His serves as the third member of the catalytic triad). All of these conserved residues are present in the amino acid sequence of the MXAN_4569 protein (Fig. 1C).
Phenotypic characterization of in-frame deletion mutants. To study the role of each gene in the life cycle of M. xanthus, markerless, in-frame deletion mutants for each of the lipolytic genes were created. The strains harboring the deletions in MXAN_3852, MXAN_5522, and MXAN_4569 were called LS2500, LS2501, and LS2502, respectively.
No differences were observed when mutant strains and the wild type were cultured in the rich liquid medium CYE. The generation time and cell density at the stationary phase were identical to those of the wild-type strain (data not shown). Moreover, the death phase also occurred with the same slope. The mutants showed wild-type motility on CYE agar (Fig. 2).
![]() View larger version (47K): [in a new window] |
FIG. 2. Comparison of the colony edges of Myxococcus xanthus DK1622 and two motility mutants with the in-frame deletion mutations (LS2500, MXAN_3852; LS2501, MXAN_5522; LS2502, MXAN_4569). Cells were grown in liquid CYE to approximately 5 x 108 cells ml1 and concentrated to 5 x 109 cells ml1 in CYE. Ten microliters was spotted in CYE agar. Pictures were taken after 96 h of incubation at 32°C. All the pictures in the same row were taken at the same magnification. All three mutants exhibited normal motility. A, adventurous motility; S, social motility.
|
![]() View larger version (123K): [in a new window] |
FIG. 3. Morphologies of Myxococcus xanthus DK1622 and deletion mutant fruiting bodies on TPM agar (LS2500, MXAN_3852; LS2501, MXAN_5522; LS2502, MXAN_4569). Cells were grown in liquid CYE to approximately 5 x 108 cells ml1 and concentrated to 8 x 109 cells ml1 in CYE. For analysis of aggregation, 10 µl was spotted on TPM agar and incubated at 32°C. Pictures were taken at indicated times. Bar, 1 mm.
|
![]() View larger version (6K): [in a new window] |
FIG. 5. Spore formation of Myxococcus xanthus DK1622 (diamonds) and of LS2500 ( MXAN_3852) (circles), LS2501 ( MXAN_5522) (triangles), and LS2502 ( MXAN_4569) (squares) deletion mutants on TPM (A) and CF (B) agars. The results shown are the averages of three different experiments. The error bars indicate standard deviations. Note differences in the scales.
|
![]() View larger version (124K): [in a new window] |
FIG. 4. Morphologies of Myxococcus xanthus DK1622 and deletion mutant fruiting bodies on CF agar (LS2500, MXAN_3852; LS2501, MXAN_5522; LS2502, MXAN_4569). Cells were grown in CYE to approximately 5 x 108 cells ml1 and concentrated to 8 x 109 cells ml1 in CYE. Ten microliters was spotted on CF agar and incubated at 32°C. Pictures were taken at indicated times. Bar, 1 mm.
|
Expression of MXAN_3852, MXAN_5522, and MXAN_4569. Gene expression was examined in M. xanthus strains harboring a translational fusion between the first codon of each gene and E. coli lacZ. Strains harboring the translational fusions in MXAN_3852, MXAN_5522, and MXAN_4569 were called LS2530, LS2531, and LS2532, respectively. ß-Galactosidase activities in these strains were determined on both TPM and CF starvation agar as well as on the vegetative medium CYE agar.
MXAN_3852 is not expressed during growth (Fig. 6A), and expression increases about 36 h after starvation on TPM (Fig. 6B) and 96 h on CF (Fig. 6C). Activity increased after that time in both media, but the levels of expression on TPM were sixfold higher than those on CF after 120 h.
![]() View larger version (15K): [in a new window] |
FIG. 6. Expression of Myxococcus xanthus lipolytic enzyme translational fusions with ß-galactosidase. ß-Galactosidase-specific activity (nmol of o-nitrophenol produced per min per mg of protein) of LS2530 (MXAN_3852-lacZ) (circles), LS2531 (MXAN_5522-lacZ) (triangles), and LS2532 (MXAN_4569-lacZ) (squares) strains during vegetative growth in CYE agar (A) and development on TPM agar (B) and CF agar (C). The results are the averages of three different experiments. The error bars indicate standard deviations. Note differences in the scales.
|
MXAN_4569 was expressed at a low and constant level during vegetative growth (Fig. 6A). Expression was developmentally regulated and increased about 20-fold on TPM (Fig. 6B) and 10-fold on CF (Fig. 6C). Peak expression coincides with spore formation.
Characterization of recombinant enzymes. In order to investigate the biochemical properties of the MXAN_3852, MXAN_5522, and MXAN_4569 proteins, these proteins were expressed with a six-histidine tag at their C termini in E. coli and purified to homogeneity using ProBond nickel-chelating resin (Invitrogen). Sodium dodecyl sulfate-polyacrylamide gel electrophoresis analysis of purified proteins showed the enzymes to be of the estimated molecular masses. This result was confirmed by Western blot analysis using an anti-His antibody, which recognizes the carboxy-terminal six-histidine tag on the recombinant proteins (data not shown).
The substrate specificities of purified enzymes were determined using pNP esters with chain lengths ranging from C2 to C16. Studies of substrate specificity of lipolytic enzymes may give rise to artifacts when changes in physicochemical properties of the substrates are not controlled (23). To avoid undesired effects, the substrates were dissolved at low molarity in the inert detergent Triton X-100.
As shown in Fig. 7, the enzymes exhibited a marked preference for short-chain fatty acids, yielding the highest activity against pNP acetate (C2). Hydrolytic activity declined with increasing chain length. Hydrolytic activity toward pNPs with chain lengths ranging from C10 to C16 was less than 5%.
![]() View larger version (18K): [in a new window] |
FIG. 7. Relative activities of MXAN_3852 (black bars), MXAN_5522 (gray bars), and MXAN_4569 (white bars) enzymes towards pNP esters with different carbon chain lengths: C2, pNP acetate; C4, pNP butyrate; C6, pNP caproate; C8, pNP caprylate; C10, pNP caprate; C12, pNP laurate; C14, pNP myristate; and C16, pNP palmitate. Activities on each substrate are expressed as the percentages of activity relative to that with pNPC2, which was taken as 100%. Values are the averages of triplicate determinations, with standard deviations indicated.
|
|
|
|---|
The MXAN_3852 protein contains the conserved motifs that characterize patatins. This family of enzymes typically requires the previous action of other hydrolytic enzymes that produce a substantially degraded product. Patatin hydrolyzes mono- and diacyl phospholipids, monoacylglycerols, and pNPs but not diacylglycerols and triacylglycerols (2, 23). Since the action of this enzyme would require other hydrolytic enzymes to initiate degradation of triacylglycerols and diacylglycerols, it not surprising that the MXAN_3852 protein has minimal expression during vegetative growth and early development. On CF agar, all aspects of MXAN_3852 development were slightly delayed but eventually wild-type levels of spores were produced.
MXAN_5522 encodes an
/ß hydrolase with identity to triacylglycerol lipases from other microorganisms. The presence of a chaperone lipase gene (MXAN_5523) next to the lipase gene is a characteristic of a subgroup of bacterial
/ß hydrolases (3, 26). On CF agar, the MXAN_5522 mutant exhibited accelerated development relative to the wild-type strain. These results suggest that a checkpoint that delays development is missing in this mutant. MXAN_5522 is expressed during vegetative growth and early development. One possibility is that this checkpoint consists of consumption of lipid reserves that cannot be mobilized by the lipase mutant.
MXAN_5522 also produced threefold more spores than wild-type cells on CF agar. Higher spore yields were also evident on TPM agar, which produces more extreme cell starvation conditions. It is not clear why high levels of spores are produced, but this phenotype has rarely been reported. Fruiting body development produces cells with three different fates. The majority of the cells die (69), presumably aiding development through the release of nutrients or factors inducing sporulation (68). A smaller fraction, about 10 to 20% of the cells, never enter the fruiting body and develop a pattern of gene expression altered from that for developing cells (42-44). These peripheral rods are thought to absorb transient influxes of nutrients without the commitment to spore germination (43). It is also possible that peripheral rods protect the fruiting body from other organisms using hydrolytic enzymes and antibiotics. The increased spore yield must come from either the peripheral rods or the autolytic cells, which argues that MXAN_5522 plays a role in cell fate determination. Differences in spore yield relative to the wild type were smaller at lower cell densities (data not shown).
The MXAN_4569 protein contains the conserved residues that characterize SGNH hydrolases, a subgroup of the GDSL lipase family (1, 10). On CF agar, the MXAN_4569 mutant developed slightly faster than the wild type but formed normal levels of spores.
All in all, the developmental phenotypes of the three lipase mutants were minor and predation was indistinguishable from that seen for the wild type. One possibility for the lack of striking phenotypes is the fact that there are such a large number of putative lipase genes. It is possible that the lipases have redundant or overlapping functions.
Substrate specificities of purified enzymes were determined using pNPs of various chain lengths. All three proteins had optimal activity for short-chain (C2) pNP (pNPC2). These enzymes were able to hydrolyze medium-chain esters (pNPC4 to pNPC8) but not long-chain esters (pNPC10 to pNPC16) (Fig. 7). Lipases are, by definition, carboxylesterases that hydrolyze long-chain acylglycerols (
C10), whereas esterases hydrolyze ester substrates with short-chain fatty acids (
C10) (65). Sequence information of cloned esterase and lipase genes has been used to identify sequence-specific motifs. Most esterases display a conserved sequence motif (GESAG) around the central active-site serine residue. However, the GESAG motif is also found in some lipases, for example the lipases from Candida rugosa, Geotrichum candidum, and Yarrowia lipolytica. The ProSite esterase consensus active site is F-[GR]-G-x(4)-[LIVM]-x-[LIV]-x-G-S-[STAG]-G (S is the active-site residue). According to ProSite, lipases have a consensus motif of [LIV]-x-[LIVFY]-[LIVMST]-G-[HYWV]-S-x-G-[GSTAC] (S is the active-site residue). These motifs are so similar that differentiation between esterases and lipases must be determined biochemically. These M. xanthus enzymes could be considered esterases, since the preferred substrates were short-chain fatty acid esters (
C10).
Esterases and other lipolytic enzymes have attracted considerable interest from industry because of their biotechnological potential (51). The wide range of properties with respect to substrate specificity and enantioselectivity has opened up a broad spectrum of applications (27). Despite their industrial importance, there is very little information on the physiological functions of esterases (45). Some esterases appear to be involved in metabolic pathways that provide access to carbon sources, e.g., the acetyl and cinnamoyl esterases that take part in the degradation of hemicellulose (14, 19). Cell-degrading esterases are believed to be important virulence factors in plant pathogens (39). The inactivation of biocides may be important in certain situations for Bacillus subtilis, which has been shown to produce an esterase that hydrolyzes the phytotoxin brefeldin A (67).
This material is based on work supported by the National Science Foundation under grant 0343874 to L.J.S. A.M.-M. is a postdoctoral fellow from "Programa de becas postdoctorales en España y en el extranjero, incluidas las becas MEC/Fulbright," Ministerio de Educación y Ciencia, España.
Published ahead of print on 16 February 2007. ![]()
|
|
|---|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Copyright © 2009 by the American Society for Microbiology. For an alternate route to Journals.ASM.org, visit: http://intl-journals.asm.org | More Info»