Previous Article | Next Article ![]()
Journal of Bacteriology, May 2007, p. 3573-3580, Vol. 189, No. 9
0021-9193/07/$08.00+0 doi:10.1128/JB.01083-06
Copyright © 2007, American Society for Microbiology. All Rights Reserved.

Hefei National Laboratory of Physical Sciences at Microscale and School of Life Sciences, University of Science & Technology of China, Hefei Anhui, 230027, China,1 Key Laboratory of Structural Biology, Chinese Academy of Sciences, Hefei, Anhui, 230037, China,2 MacCHESS, Cornell High Energy Synchrotron Source, Cornell University, Ithaca, New York 148533
Received 2 August 2006/ Accepted 12 November 2006
|
|
|---|
|
|
|---|
![]() View larger version (26K): [in a new window] |
FIG. 1. Pathway for polymerization of PBG and modification of porphyrinogen's side chain in the biosynthesis of tetrapyrroles. The acetate, propionate, and vinyl groups are denoted A, P, and V, respectively. Without the inversion of the D-ring, hydroxymethylbilane cyclizes to form symmetric urogen I. The enzymes responsible for the polymerization of PBG and modification of porphyrinogen's side chains, PBGD, UROD, UPMT, and CPOX, are described in the text. The enzyme UROD, which is the focus of this study, is underlined. The figure was generated using ChemWindow 6.0.
|
The crystal structures of human UROD (hUROD) and tobacco UROD (tUROD) reveal that the enzyme is a homodimer, each monomer comprising a single domain containing an
/ß-barrel with a deep active-site cleft (21, 35). Based on the structures of the hUROD-product complex, Arg37 and Arg41 have been proposed to interact with propionate groups of products, and Asp86 has been thought to interact with pyrrole NH groups and likely promotes the catalysis by stabilizing a positive charge on a reaction intermediate (28).
Compared with eukaryotic URODs, bacterial UROD is less understood, with only one report which describes the characterization of a UROD from Rhodobacter sphaeroides (16). In the gram-positive bacterium Bacillus subtilis, the genes for enzymes catalyzing the biosynthesis of heme and siroheme are organized in four independent operons (11, 12, 13, 15). UROD is encoded by the hemE gene in the hemEYH operon (11). Two other genes encode the enzymes responsible for the terminal pathway of heme biosynthesis. These two enzymes have been well studied and display a few special characteristics (8). However, little is known for the B. subtilis UROD (URODBs), a branch-point enzyme that plays a regulatory role in the metabolic flux through the branched pathway of heme biosynthesis. Here, we present the three-dimensional crystal structure of URODBs to understand the molecular mechanism of heme biosynthesis in B. subtilis.
|
|
|---|
The expression level, enzyme purity, and molecular weight of URODBs were determined by sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) on 15% polyacrylamide gels. Dynamic light scattering (DLS) measurements were performed at 20°C with a DynaPro-MS800 (Proterion, United States). The molecular weight of URODBs was calculated by assuming a globular conformation model, using the software supplied by the manufacturer.
Urogen III was prepared by the reduction of uroporphyrin III with sodium amalgam (16). The enzymatic activity was analyzed spectroscopically at 400 nm (
= 489 mM1 cm1), monitoring the concentration of coproporphyrin III extracted with 1 ml ether from the reaction mixture (6). One unit of UROD activity is defined as the amount of enzyme that catalyzes the formation of 1 nM coprogen III in 30 min. Protein concentrations were determined with Coomassie brilliant blue G-250, using bovine serum albumin as the standard.
Crystallization and data collection. The hexahistidine-tagged URODBs was crystallized by the hanging-drop method at 20°C. The reservoir solution contained 25% polyethylene glycol-monomethyl ether 2000 and 160 mM sodium acetate in 100 mM citrate, pH 5.6. The hanging-drop solution was made by mixing 1 µl reservoir solution with 2 µl protein solution of 7 mg/ml URODBs. Crystals as large as 0.4 by 0.3 by 0.1 mm were obtained in 1 week.
The diffraction data were collected from one crystal at BSRF (Beijing, China) under cryogenic protection at 100 K. A total of 320 images were recorded on a MarCCD detector. The raw image data were integrated in the MOSFLM program and merged in the SCALA program after rejecting unreliable diffractions (5). The data collection, reduction, and crystallographic statistics are listed in Table 1.
|
View this table: [in a new window] |
TABLE 1. Crystallographic data collection, reduction, and refinement statistics
|
The model was then subjected to 20 cycles of rigid-body and restraint refinements in the REFMAC program (25). The model phases were improved by density modification with noncrystallographic symmetry averaging before the model building. The averaged density map came from density-modification phases and is a good-quality map for rebuilding the URODBs model, including the parts where the structures of hUROD and URODBs are different. The strict noncrystallographic-symmetry constraints were used during the iterative model building in the O program and the refinements in the CNS program (4). When the model was completed, the constraints were removed and water molecules were added. Subsequent refinements of URODBs by REFMAC resulted in an R factor and Rfree factor of 19.7% and 25.1%, respectively (see Table 1 footnotes).
Protein structure accession number. The atomic coordinates and diffraction data have been deposited in the Protein Data Bank (http://www.pdb.org/) under the identification number 2INF.
|
|
|---|
SDS-PAGE showed that the monomer size of URODBs is about 40 kDa (Fig. 2A), corresponding to the analysis of the transcription-translation of B. subtilis hemE in vitro (11) and close to the molecular mass (41,797.04 Da) deduced from the sequence of hexahistidine-tagged URODBs by the Compute pI/MW tool (http://www.expasy.org). Assuming a globular protein shape, the DLS data were consistent with a homodimer of about 81 kDa (Fig. 2B). The dimerization of URODBs in solution is identical with the formation of the dimers of hUROD and tUROD (22, 27).
![]() View larger version (20K): [in a new window] |
FIG. 2. Determination of molecular mass of URODBs by SDS-PAGE (A) and DLS measurements (B). (A) Lanes 1 and 2, total protein from the uninduced and induced cells, respectively; lane 3, soluble protein from the induced cell; lane 4, purified hexahistidine-tagged URODBs (20 µg). Protein markers are indicated on the left. (B) The protein samples were dissolved in 10 mM Tris-HCl, 100 mM NaCl, and 10 mM ß-mercaptoethanol, pH 7.0, at a concentration of 2 mg/ml.
|
)8 barrel fold. Eight parallel ß-strands form a circular ß-barrel surrounded by eight
-helices. The core of the URODBs barrel, with a diameter of about 15 Å, is built up with four stacked layers containing hydrophobic residues (Fig. 3A). Secondary structure assignments (Fig. 4A) were used as defined in the program ESPript (10), with the exception that residues 24 to 27 were defined as a strand (ß1). Strands and helices of the (ß/
)8 barrel are named ß1 to ß8 and
1 to
8. All other helices have been given the alphabetical designations
A to
I (Fig. 4A and B). Helices
C,
H, and
I adopt 310 conformations, as do the last three residues of helix
4 and the first three residues of helix
5. The loops between the C-terminal end of each barrel strand and the subsequent barrel helix are numbered L1 to L8 (Fig. 4B). In loop L1, the small loops at both sides of
B are named L1a, including residues 26 to 36, and L1b, including residues 50 to 54. In loop L2, four small loops between the helices are named L2a, including residues 75 to 83; L2b, including residues 87 to 107; L2c, including residues 111 to 118; and L2d, including residues 121 to 123.
![]() View larger version (89K): [in a new window] |
FIG. 3. (A) The URODBs dimer in the asymmetric unit. (B) Ribbon diagram of the URODBs monomer. (C) Superposition of C atoms for the monomer of UROD from B. subtilis (red), humans (blue), and tobacco (green), respectively. The L1 and L2 loops are marked. (D) Molecular surface colored (blue, positive; red, negative) according to the electrostatic potentials of the URODBs monomer. The areas of the L1 and L2 loops are denoted. The active-site cleft is located in the ß-barrel. All colored images in this paper were generated in PYMOL (http://www.pymol.org).
|
![]() View larger version (81K): [in a new window] |
FIG. 4. (A) Structure-based sequence alignment of URODBs (bsUROD) with the human and tobacco enzymes. The secondary structure of URODBs is shown above its sequence. The image was produced using the program ESPript. Sequence alignment was performed using ClustalW. (B) Topological diagram of URODBs with the secondary structure elements indicated. Helices and strands are shown as bars and arrows, respectively. The first and last residues of each secondary structural element are numbered.
|
positions among the various dimers is calculated to be in the range from 0.274 to 0.456 Å. According to the calculation done with CNS, monomer A's solvent-accessible surface area buried at the dimer interface is 2,341 Å2 (Fig. 3B). The dimer formation corresponds with the molecular weight by DLS measurements. The UROD dimer is essential for catalysis, since the Y311C mutant of hUROD retains 60% of the enzyme activity of the wild type, due to some disruption of the dimer interface (24). The crystal structures of hUROD and tUROD reveal one molecule in the asymmetric unit. The dimer in the URODBs lattice is analogous to the interasymmetric-unit homodimers of the eukaryotic structures (21, 35). The area buried at the dimer interface of URODBs is similar to that of hUROD and tUROD. The dimer interface is remarkably flat and extensive, consisting of a small loop between
F and
G and the five loops L4, L5, L6, L7, and L8.
The amino acid sequence of URODBs shows about 36% and 38% identity with tUROD and hUROD, respectively (Fig. 4A). Despite low sequence identity among URODBs and two eukaryotic URODs, the overall folding of URODBs is similar to that of eukaryotic homologous enzymes (Fig. 3C). The RMS deviation of the C
positions of 322 structurally equivalent residues of URODBs is 1,457 Å for hUROD and 1,500 Å for tUROD. The structural similarity between URODBs and hUROD is higher, corresponding to identity of the two enzymes. The main differences in the URODs from the three organisms are in the L1 and L2 loops (Fig. 3C). The presence of several positively charged residues, including the L1 loop, effect an obvious charge polarity on the electrostatic surface of the URODBs monomer (Fig. 3D).
There are a large number of proteins containing (ß/
)8 barrel folds with different functions. For bacterial enzymes catalyzing nonoxidative decarboxylation, the (ß/
)8 fold in a cofactor-free orotidine 5'-monophosphate decarboxylase was determined (1). However, this enzyme shows little structural similarity to URODBs. Recently, a metal-dependent
-amino-ß-carboxymuconic-
-semialdehyde decarboxylase has also been identified as possessing the (ß/
)8 fold (19, 23).
Active-site structure of URODBs. The active-site structure in URODBs monomer A is similar to that in hUROD and tUROD. It is a deep cleft in a single domain surrounded by several flexible loops, including L1, L2, L3, L4, and L8, at the C-terminal end of the ß-barrel. Aligning with the active-site structure of the hUROD-coprogen III complex, 18 amino acid residues in URODBs, contacting at least one atom of the product ligand within 4.0 Å of the product, are displayed (Fig. 5A). They are Arg29 to Arg33, Ile74 to Asp78, Tyr38, Leu47, Phe144, Tyr154, Pro160, Phe207, Ser209, and H322. Among them, six residues are different from those in hUROD. The residues Tyr38, Leu47, Leu77, Tyr78, Lys79, and Pro160 in URODBs are replaced with Phe46, Phe55 Ile84, Phe85, Ser86, and Gly170, respectively, in hUROD. Ile92 and Pro98, equivalent to Met100 and Pro106 in hUROD, are not visible in the electron density map. In the active site, the residues are divided into three categories according to their function in substrate recognition and decarboxylation.
![]() View larger version (46K): [in a new window] |
FIG. 5. A stereo view of the active sites from the URODBs monomer. (A) Eighteen amino acid residues within 4 Å of coprogen III are shown as sticks in URODBs (red) and in hUROD in complex with coprogen III (green). Ile79 is not labeled since it is not distinguished from other residues in the site. The residue numbering of URODBs, from the first amino acid, methionine, is shown. (B) The invariant residues in the active site of URODBs modelled with coprogen III from the enzyme-product structure of hUROD.
|
2 atom and the main-chain N atom of Met80. Two equivalent residues in hUROD are Asp86 and Leu88. The central coordination of the geometry of Asp86 allows substrates to be bound with equivalent activating interactions, which makes the partially decarboxylated intermediates bind and rebind in orientations of 90° about the contact point (28).
The second category includes a number of polar residues in the active cleft (Fig. 5B). An alignment of 39 sequences shows that four polar residues, Arg29, Arg33, Tyr154, and His322, are invariant (28). They may function in substrate binding and recognition through interactions with proporphyrinogen's side chains. Arg29 and Arg33 in URODBs are coordinated with carboxylate groups of the product, from the modeling of the hUROD-urogen III structure. Tyr154 seems not to be the key catalytic group in the decarboxylation reaction. An identical tyrosine in tUROD is proposed to protonate the
-position of the pyrrole ring in catalysis (21), but in hUROD, this role is not favored by site-directed mutagenesis studies and the determination of the complex structures (28). His322 is not crucial for decarboxylation, since the mutational analysis suggests that the analogous residue in hUROD is likely involved in the orientation of partially decarboxylated substrates (36).
The third category encompasses several hydrophobic amino acid residues (Fig. 5A and B). Their solvent-exposed hydrophobic side chains in the active-site cleft are proposed to be candidates for participation in substrate binding in a hydrophobic environment, contributing to catalysis by destabilization of the charged substrate with respect to the carbon dioxide product (28). Ala31 in URODBs is identical to Ala39 in hUROD that interacts with the C-ring propionate of the product via the apparent hydrogen bond in hUROD's complex structure, indicating that this carboxylate is protonated (28). Among the seven hydrophobic residues in URODBs, Ile79, Phe144, and Phe207 are invariant (Fig. 5B).
Comparison of the secondary structure with those of hUROD and tUROD.
There are some small differences in the lengths and positions of the secondary structural elements of bsUROD compared with those of tUROD and hUROD (Fig. 4A). In tUROD, the presence of Pro26 disrupts the first ß sheet and thus forms the (ß
)7 barrel fold, which has been found in several organisms by amino acid sequence alignments (21, 35). In URODBs and hUROD, a threonine is substituted at this position. Two helices,
E and
6, are one residue shorter in URODBs than in hUROD, and
4 is four residues shorter. On the contrary,
7 is one residue longer in URODBs. The intervening loops between
2-ß3 and
4-ß5 in URODBs are one and three residues shorter, respectively. In hUROD, the identical L1 loop contains two short helices, and the identical L2 loop contains three short helices and two short ß-sheets, whereas in URODBs a helix in the L1 loop and three helices in the L2 loop are displayed (Fig. 4B), suggesting that two loops as part of the active site are more flexible in URODBs.
|
|
|---|
Possible functional residues commonly existed in four designated enzymes. Since PBG and porphyrinogen, including urogen III and coprogen III, contain negatively charged carboxylate groups, the positively charged residues in the enzymes are essential for substrate recognition through hydrophilic interactions. In proteins, arginine residues are prime candidates. It was proposed that two arginine residues in E. coli UPMT (33), four arginine residues in human CPOX (18), and three arginine residues in human PBGD (17) might be involved in the binding of the respective substrates.
Anion coordination by the pyrrole nitrogen can create a cone conformation for the macrocycle (18). An aspartate interacting with a pyrrole NH group is proposed for E. coli PBGD and yeast and human CPOX (17, 18, 29). The central geometry of pyrrole's coordination by an aspartate, except in hUROD, is not identified in UPMT and CPOX, due mainly to the lack of the complex structures with a substrate or product. In the presence of an excess of UPMT, trimethyl and tetramethyl products are generated (31). The tetramethylation of urogen III at positions 2, 7, 12, and 18 is catalyzed by UPMT. At the same position on the side chains, decarboxylation is catalyzed by UROD. An aspartate in UPMT is proposed to interact with urogen III (33, 34). For two branch-point enzymes sharing common initial substrates, the urogen III binding site is a big trough in UPMT and a deep cleft in URODBs, mainly due to the difference in the reactions catalyzed by the two respective enzymes.
It is thought that the catalytic mechanism of an aspartate in hUROD is analogous to that in PBGD (28). However, mutation of the equivalent aspartate in human PBGD to glycine results in the production of the first intermediate bound with the enzyme (17), suggesting that this residue may not play a key role in the initial reaction, and polymerization of PBG requires the aspartate to function in coordination with three arginine residues. For Pseudomonas denitrificans UPMT, some residues, including Asp47 and Leu49, are proposed to contribute to the binding of urogen III. The Asp47Asn and Leu49Ala mutants generate the first methylated intermediate, precorrin-1 (34). As the exact urogen III binding site in UPMT is not determined, we envisage that the possible roles of two amino acid residues in UPMT are similar to the roles of Asp78 and Met80 in URODBs. Leu49 in the UPMT may precisely orient Asp47, analogous to the role of Met80 in URODBs.
Possible functions of two loops in URODBs. The binding of substrates and release of products may be necessary for the coordinating function of the L1 and L2 loops in URODBs. In the L1 loop, the small loop L1a includes Tyr27 to Asn36. Among them, four residues are invariant. Mutation of the invariant residue glycine in this small loop inactivates yeast UROD completely (9), possibly resulting from the change in this loop in which three amino acid residues associate with side chains of urogen III. The minor shift of two arginine residues is observed in the enzyme-product structures of hUROD liganded with coprogen III and isomer I (28). The symmetric nature of the urogen I structure suggests the active-site requirements of four decarboxylation reactions are essentially the same. Charge-charge interactions of the enzyme with urogen III may involve the attraction and binding of extra urogen III at high concentrations and induce the minor shift of L1a. Under these conditions, the restriction of the cleft on the asymmetric nature of the urogen III structure may be invalidated and a random sequence of decarboxylation occurs. In addition, the carboxylate groups of the substrate and the subsequent products might associate with the positively charged area and affect the binding of the substrate and release of the product.
The L2 loop comprises four small loops and three helices in URODBs. The small loop L2a includes Asp78 and Met80. The absence of significant electron density for a dozen amino acid residues suggests real disorder in the small loop L2b in URODBs. Comparison of URODBs with hUROD and tUROD shows that equivalent loops in the latter two structures also appear to have substantial flexibility, with high B values and broken electron density. The small loop L2b partially covers the opening to the active site. That the identical loop adopts the same conformation in the unliganded and product-bound structure of hUROD is thought to result in the binding of substrate and release of product with minimal change (28). Because the reaction proceeds through intermediate porphyrinogens with seven, six, and five carboxyl groups, the product-bound structures alone are not enough to provide information on the mobility of L2b. The minor shift of L2a, possibly caused by the mobility of L2b, affects the central coordination geometry of Asp78 in URODBs. Observed alterations in the pattern of accumulation of intermediates might mainly reflect the mobility of L2b. For this reason, the first intermediate for UROD from R. sphaeroides is accumulated upon heating (16).
Amino acid residues possibly involved in catalysis.
Based on the elucidation of the role of Asp86 in hUROD, we favor the idea that the preferred role of Asp78 in URODBs may be to participate in orienting urogen III for the sequential decarboxylation reactions. The protonated intermediate is promoted and generates Asp78, which delocalizes the positive charge on the pyrrole nitrogen. Because of the high
-electron density of the C
atom of the pyrrole ring, the sequential decarboxylation route occurring via the sole residue Asp78 with the coordination of the pyrrole NH groups seems hardly credible. However, the exact location of the decarboxylation site is elusive with the available structural information. A complex structure of URODBs with the initial substrate would help to identify the catalytic residues. Unfortunately, attempts to obtain the cocrystal complex have been unsuccessful. The soaking experiments with 5 to 20 µM uroporphyrin III or isomer I also failed, since both oxidized substrates caused the destruction of the crystals.
More evidence, especially the failure to discover point mutations or chemical modifications that inactivate only one part of the decarboxylation process, suggests all decarboxylation happens at a unique site in the active cleft. According to the finding of sequentially clockwise decarboxylation, the first potential decarboxylation site may be occupied by the C ring pyrrole of the product. At this location, several hydrophobic residues orient the acetate side chain of the product, observed from the modeling of urogen III in the active site of URODBs (Fig. 5B). It is proposed that a ground-state destabilization of the energy of substrate binding may be dependent on the hydrophobic residues in hUROD (28), analogous to the mechanisms of other decarboxylases, including orotodine-5'-phosphate decarboxylase (1). However, the carboxylate binding sites of these decarboxylases contain hydrophobic and negatively charged residues. The cofactor-free nonoxidative orotodine-5'-phosphate decarboxylase contains an aspartate in close proximity to the carboxylate binding site, and the role of this residue has been disputed (1, 14). In URODBs and hUROD, no negatively charged residue is positioned in the carboxylate binding site (Fig. 5A). Obviously, the precise location of the substrate in URODBs is not the same as that of the product. Modification of URODs from rat livers and R. sphaeroides with the different arginine-selective reagents results in the complete inactivation of the enzyme (3, 16). Thus, Arg29 near the product's C-ring is recommended as a candidate for the binding of the acetate group of the substrate (Fig. 5B).
It is speculated that Arg29 in URODBs has dual roles. First, it could assist Asp78 in stabilizing a positive charge on a reaction intermediate. Second, it could position the acetate groups of the substrate to produce the scissile bond between the
- and ß-positions. The decarboxylation of urogen III occurs through a tautomeric form of the pyrrole ring, as depicted for eukaryotic homologous enzymes (21, 28). When CO2 is released from the substrate, the aromatic hydrogen of Phe144 and/or Phe207 might capture the CO2 molecule. The proposed catalytic mechanism of URODBs is somewhat analogous to that of tUROD (21), but the functional residues in URODBs are different.
Published ahead of print on 22 November 2006. ![]()
|
|
|---|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Copyright © 2009 by the American Society for Microbiology. For an alternate route to Journals.ASM.org, visit: http://intl-journals.asm.org | More Info»