Previous Article | Next Article ![]()
Journal of Bacteriology, July 2008, p. 4666-4676, Vol. 190, No. 13
0021-9193/08/$08.00+0 doi:10.1128/JB.00093-08
Copyright © 2008, American Society for Microbiology. All Rights Reserved.
,
Australian Bacterial Pathogenesis Program, Discipline of Microbiology and Immunology, School of Molecular and Biomedical Science, University of Adelaide, South Australia, Australia
Received 17 January 2008/ Accepted 28 April 2008
|
|
|---|
icsA strains. Mutants were characterized for IcsA protein production, cell surface expression and localization, intercellular spreading, F-actin comet tail formation, and N-WASP recruitment. Using this approach, we have identified a putative autochaperone region required for IcsA biogenesis, and our data suggest an additional region, not previously identified, is required for N-WASP recruitment. |
|
|---|
IcsA is an autotransporter (AT) protein, belonging to the largest family of gram-negative bacterial extracellular proteins, with more than 700 members (40). Like other members of this family, IcsA consists of three major domains: an N-terminal signal sequence (amino acids [aa] 1 to 52), to direct Sec-dependent protein transport across the inner-membrane; and a C-terminal translocation domain (aa 759 to 1102) that enables export of the remaining N-terminal region of IcsA, the passenger domain (aa 53 to 758), across the OM (5, 6, 19, 48). The passenger domain becomes exposed on the outer surface, anchored by the translocation domain, and is responsible for IcsA activity in N-WASP recruitment and ultimately bacterial motility (17, 52).
Within the host cell, N-WASP regulates the host actin cytoskeleton and functions as a link between signaling pathways and de novo actin polymerization, thereby initiating host cell motility and morphological changes (28, 55). IcsA103-433, which contains a series of glycine-rich repeats (GRR) (aa 140 to 307), is sufficient for N-WASP binding in vitro (49, 50). However, in vitro actin polymerization requires aa 53 to 508, and it has been suggested that the residues involved in N-WASP recruitment in vivo are within this region (17, 51, 52). Correspondingly, a Shigella strain expressing IcsA
509-729 was reported to recruit N-WASP inside host cells (49). However, this mutant had previously been shown to have a defect in F-actin tail formation, which was attributed to nonpolar IcsA localization (51). Consequently, whether aa 53 to 508 of IcsA are actually sufficient for F-actin comet tail formation inside host cells awaits clear verification. A region encompassing the GRR region (aa 104 to 506) has been shown to interact with the host protein vinculin (51), and another region (aa 320 to 433) interacts with S. flexneri IcsB and the host autophagy protein, Atg5 (37).
Two regions of the IcsA passenger domain, polar localization region 1 (aa 1 to 104) and polar localization region 2 (aa 507 to 620), have been shown to be independently responsible for targeting IcsA export to the old cell pole (9, 51). IcsA polarity is thought to enhance unidirectional movement of the bacteria, which has been shown to correlate with an increased frequency of protrusion formation into adjacent host cells (a process that leads to intercellular spreading) (29). Additionally, a cleavage site for the virulence plasmid-encoded, OM, serine protease IcsP (SopA), exists between residues R758 and R759. Cleavage of IcsA by IcsP results in the release of the 95-kDa N-terminal fragment into the extracellular milieu at a low efficiency, such that during exponential growth of the bacteria, 80% of the IcsA molecules remain uncleaved and anchored to the OM (11, 13, 15, 46, 47). The significance of IcsA cleavage by IcsP remains controversial, although it has been suggested that it functions to enhance IcsA polarity (13, 46).
Previous IcsA structure and function studies have relied predominantly on relatively large deletion mutations of IcsA regions (8, 49-51). Such approaches may have resulted in the removal of multiple functional domains, complicating the interpretation of the phenotypes of the icsA mutants in those studies. In previous studies we have provided evidence of masking of IcsA function by lipopolysaccharide O antigen (LPS Oag) (31, 32). LPS is a major constituent of the OM of gram-negative bacteria, consisting of a lipid A, a core polysaccharide component, and an Oag polysaccharide chain (also called O antigen) that extends into the extracellular milieu (4, 21). Hypothetically, truncated IcsA proteins may be more prone to LPS Oag masking, further complicating the assessment of their activity. To better understand the IcsA structure-function relationship, pentapeptide linker insertion mutagenesis of IcsA was undertaken and 47 unique IcsAi mutants were isolated and characterized. In addition to evaluating the abilities of various IcsAi mutants to interact with N-WASP in the presence of native LPS-Oag, we also investigated the influence of LPS Oag on IcsA-N-WASP interactions by assessing the function of these proteins in the absence of LPS Oag. We have identified regions of IcsA required for N-WASP recruitment inside host cells and a putative autochaperone region required for IcsA biogenesis.
|
|
|---|
|
View this table: [in a new window] |
TABLE 1. Bacterial strains and plasmids
|
DNA methods.
Escherichia coli K-12 strain DH5
was used for routine cloning, and general cloning techniques and PCR and DNA sequencing were performed as described previously (1, 34).
Antibodies and antisera. Affinity-purified rabbit polyclonal anti-IcsA antiserum was produced in our laboratory as described previously (53). The polyclonal rabbit anti-N-WASP antibody was initially a generous gift from Hiroaki Miki. Subsequent stocks of comparable polyclonal rabbit anti-N-WASP antibodies were made in our laboratory according to the method described by Fukuoka et al. (16). The vector encoding a glutathione S-transferase-tagged carboxyl-terminal region of N-WASP (VCA region; amino acids 388 to 501), used to produce purified protein for the production of antiserum, was kindly provided by Hiroaki Miki. The anti-N-WASP antibody was used at 1:100. The polyclonal anti-Shigella LPS (3, 4) was from Denka Seiken Co. (Japan) and was used at 1:100.
Linker insertion mutagenesis using the Mutation Generation System (Finnzymes). Linker insertion mutagenesis of IcsA was performed using the Mutation Generation System (Finnzymes) according to the manufacturer's instructions. Briefly, an in vitro transposition reaction was carried out to randomly introduce an artificial entranceposon (M1-Cmr) into pIcsA (33, 54), which encodes wild-type (WT) IcsA (IcsAWT). The entranceposons were removed from the mutated plasmids using the NotI restriction enzyme, and the digested plasmids were then religated to leave an in-frame insertion of 15 bp encoding 5 aa. Plasmids were screened initially by PCR using the NotI miniprimer (Finnzymes) (a primer complementary to 10 bp of the insertion) and primer 2156IcsAF (see Table S2 in the supplemental material), which is complementary to a region 100 bp upstream of the icsA gene in pIcsA, to identify those which contained insertions within the IcsA passenger domain. The location of each insertion and the encoded amino acids for each of these plasmids were determined by DNA sequencing using primers 2156IcsAF, IcsA549F, IcsA2381R, 2170IcsAR (see Table S2 in the supplemental material).
Preparation of whole-cell lysates. The equivalent of 5 x 108 bacteria were pelleted by centrifugation (3,300 x g for 6 min at 4°C and resuspended in 100 µl of 2x sample buffer (26).
TCA precipitation of culture supernatants. The equivalent of 5 x 109 bacteria were pelleted by centrifugation at 2,200 xg for 10 min at 4°C. The supernatants were collected, supplemented with 5% ice-cold trichloroacetic acid (TCA), and incubated on ice for 1 h. The TCA precipitate was pelleted by centrifugation at 40 000 x g for 30 min at 4°C. The supernatant was removed and the pellet centrifuged again for 5 min as before to remove the remaining supernatant. The protein pellet was washed with ice-cold acetone and centrifuged for another 5 min and the acetone carefully removed. The pellet was air-dried and then resuspended in 100 µl of 1x sample buffer (26).
Western transfer and detection. Proteins were separated on 7.5% or 12% sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) gels and transferred to a nitrocellulose membrane. The membrane was blocked for 1 h in TTBS (Tris-buffered saline, 0.05% Tween 20) containing 5% skim milk and incubated with the desired primary antibody in the same buffer overnight. After three 10-min washes in TTBS, the membrane was incubated with horseradish peroxidase-conjugated goat antirabbit or a horseradish peroxidase-conjugated goat antimouse secondary antibodies (Biomediq DPC) for 2 h and washed three times in TTBS and then three times in Tris-buffered saline. The membrane was incubated with chemiluminescence blotting substrate (Roche) for 1 min. Chemiluminescence was detected by exposure of the membrane to X-ray film (Agfa), and the film was developed using a Curix 60 automatic X-ray film processor (Agfa).
Indirect immunofluorescence (IF) of whole bacteria. Log-phase bacteria were pelleted by centrifugation (2,200 x g, 10 min, 4°C) and the supernatant discarded. Bacteria were fixed in formalin (3.7% paraformaldehyde in 0.85% saline) for 15 min at room temperature. Sterile coverslips were placed in 24-well trays and incubated with 10% poly-L-lysine in phosphate-buffered saline (PBS) for 1 min. The poly-L-lysine was aspirated, and formalin fixed bacteria were centrifuged onto poly-L-lysine-coated coverslips at 1,000 x g for 5 min. Bacteria were incubated with the desired primary antibody diluted 1:100 in PBS with 10% fetal calf serum (FCS). Bacteria were washed three times in PBS and incubated with either Alexa 488-conjugated donkey antirabbit or Alexa 488-conjugated donkey antimouse secondary antibodies (Molecular Probes) diluted 1:100 in PBS with 10% FCS.
Plaque assays. Plaque assays were performed with HeLa cells using a modification of the method described by Oaks et al. (35). HeLa cells were seeded to 60-mm-diameter, six-well trays at 1 x 106 in minimal essential medium-10% FCS with penicillin and streptomycin. Cells were grown to confluence overnight and washed twice with Dulbecco's PBS (D-PBS) and once in Dulbecco's modified Eagle medium (DMEM) prior to inoculation. Log-phase bacteria were diluted to 1:100 and 1:300 in DMEM, and 0.2 ml was added to each well. Trays were incubated at 37°C in a humidified CO2 (5%) incubator, and the trays were rocked gently every 15 min to ensure that the inoculum was spread evenly across the monolayer. At 90 min postinfection, the inoculum was carefully aspirated and 4 ml of the first overlay (DMEM, 5% FCS, 20 µg/ml of gentamicin, 0.5% agarose [Seakem ME]) was added to each well. The second overlay (DMEM, 5% FCS, 20 µg/ml of gentamicin, 0.5% agarose, 0.1% Neutral Red solution [Gibco BRL]) was added at either 24 h or 48 h postinfection and plaque formation observed 6 to 8 h later. Plaques were in general visible without staining at 48 h.
Trypsin accessibility assay. Limited proteolysis was performed as described by Oliver et al. (39) with modifications. The equivalent of 5 x 109 log-phase bacteria were pelleted by centrifugation, the supernatant was discarded, and the pellet was resuspended in 150 µl of PBS. Bacterial suspensions were supplemented with 0.1 µg/ml of Trypsin from bovine pancreas (no. 109819; Roche) and incubated at room temperature to allow proteolysis. Aliquots were taken at several time points (0 min, 5 min, and 10 min) and supplemented with 1 mM phenylmethylsulphonylfluoride (Sigma) to inhibit Trypsin and further proteolysis. An equal volume of 2x sample buffer (26) was added to each sample, all of which were then heated at 100°C for 5 min prior to SDS-PAGE and western immunoblotting.
Infection of tissue culture monolayers with S. flexneri and IF labeling. Infection of tissue culture cells and IF staining were performed as recently described (31). Briefly, 5 x 108 log-phase bacteria were pelleted by centrifugation (3,300 x g, 6 min) and resuspended at 109 bacteria/ml in D-PBS. One hundred microliters of bacterial suspension was then centrifuged onto HeLa cells grown to semiconfluence on sterile glass coverslips. After 1 h of incubation at 37°C in 5% CO2, the infected cells were washed three times with D-PBS and incubated with 0.5 ml minimal essential medium containing 40 µg/ml of gentamicin for a further 1.5 h. Infected cells were washed a further three times in D-PBS and then fixed for 15 min in formalin, incubated with 50 mM NH4Cl in D-PBS for 10 min, and then permeabilized with 0.1% Triton X-100 in H2O for 5 min. After blocking in 10% FCS in PBS, the infected cells were incubated at 37°C for 30 min with the desired primary antibody. After washing in PBS, coverslips were incubated with either Alexa 594-conjugated donkey antirabbit or Alexa 594-conjugated donkey antimouse secondary antibodies (Molecular probes) (1:100), as required. F-actin was visualized by staining with fluorescein isothiocyanate (FITC) phalloidin (0.1 µg/ml; Sigma), and 4',6'-diamidino-2-phenylindole (DAPI) (0.1 µg/ml, Sigma) was used to counterstain bacteria and cellular nuclei as required.
Microscopy. Coverslips were mounted on glass slides with Mowiol 4-88 (Calbiochem) containing 20 µg/ml p-phenylenediamine (Sigma) and examined with an Olympus IX-70 microscope with phase-contrast optics using a 100x oil immersion objective and a 1.5x enlarger as required. Fluorescence and phase-contrast images were false color merged using the Metamorph software program (version 6.3r7; Molecular Devices).
Quantitation of F-actin tail formation and N-WASP recruitment. Quantification of F-actin comet tails is made difficult by the fact that their numbers naturally vary greatly between cells. Therefore, the quantitation method used by Frischknecht et al. (14) was adopted, in which the presence of a single actin tail within an infected cell is scored as positive. N-WASP recruitment was also quantitated in this manner. Initially, for each strain, 20 cells were observed and scored as described above in two independent experiments. For strains expressing the mutant IcsAi56, IcsAi193, IcsAi288, IcsAi312, or IcsAi502, where the frequency of F-actin tail formation was comparable to that of the WT despite obvious intercellular spreading defects, 100 cells were scored in three independent experiments.
|
|
|---|
icsA strain (RMA2041; Table 1) to enable characterization of IcsAi production and function.
![]() View larger version (19K): [in a new window] |
FIG. 1. Schematic locations of the 5 amino acid insertions in 47 mutant IcsAi proteins and the corresponding phenotypes. The location of the linker insertion for each of the 47 IcsAi mutants is indicated with a vertical line.
|
|
View this table: [in a new window] |
TABLE 2. Phenotypes of S. flexneri strains expressing IcsAi mutants
|
![]() View larger version (44K): [in a new window] |
FIG. 2. Western blot analyses of IcsAi mutant production and secretion. (A) Whole-cell lysates from log-phase S. flexneri icsA strains expressing IcsAWT or IcsAi mutants. (B) Tricholoroacetic acid-precipitated culture supernatants from log-phase S. flexneri icsA strains expressing IcsAWT or IcsAi mutants. (C) Whole-cell lysates from E. coli UT5600 strains expressing IcsAWT or IcsAi mutants. All samples were electrophoresed on a 7.5% SDS-PAGE gel prior to Western blot analysis with anti-IcsA antibodies. The 116-kDa band corresponds to full-length IcsA, and the 95-kDa band corresponds to the cleaved form (IcsA'). Samples represent 1 x 108 cells or the culture supernatant equivalent of 1 x 109 cells.
|
![]() View larger version (41K): [in a new window] |
FIG. 3. Trypsin accessibility of IcsAi mutants. Log-phase cultures of E. coli UT5600 expressing IcsAWT or IcsAi mutants were treated with 0.1 µg/ml of trypsin at 25°C. Aliquots were taken at 0 min, 5 min, and 10 min and supplemented with 1 mM phenylmethylsulphonylfluoride to inhibit further proteolysis. Whole-cell lysates were electrophoresed on a 7.5% SDS-PAGE gel and subjected to Western blot analysis with anti-IcsA antibody. Samples represent the equivalent of 1 x 109 cells.
|
icsA strains expressing IcsAi were examined by IF microscopy with anti-IcsA antibody. Of the six mutants that demonstrated reduced production by Western immunoblotting, IcsAi633, IcsAi643, IcsAi677, and IcsAi716 could not be detected on the surface of bacteria while IcsAi595 and IcsAi598 could be detected only weakly (Table 2). The remaining 41 IcsAi mutants could all be readily detected on the surface of S. flexneri (Table 2). Thirty-nine IcsAi mutants that had WT production levels exhibited a surface distribution that was comparable to that of IcsAWT, with these proteins being predominantly localized to the pole(s) and little or no protein detected on the lateral regions of bacteria. However, two mutants, IcsAi532 and IcsAi563, displayed altered localization (Fig. 4; Table 2). IcsAi532 was distributed polarly on only 5% of bacteria, while for the majority of bacteria this protein was either distributed uniformly on the surface (47.5%) or distributed over the entire surface of the bacteria with some polar reinforcement (47.5%) (see Table S3 in the supplemental material). Similarly, the IcsAi563 mutant was distributed polarly on only 22.5% of the bacteria, while for the majority of bacteria this protein was either distributed uniformly on the surface (35%) or distributed over the entire surface of the bacteria with some polar reinforcement (42.5%) (see Table S3 in the supplemental material). Notably, mutants with linker insertions in polar localization region 1 (aa 1 to 104) (IcsAi56, IcsAi81, and IcsAi87) were all polarly distributed on at least 90% of bacteria (see Table S3 in the supplemental material). IcsAi595 and IcsAi598, which have a linker insertion in polar region 2, appeared to be polarly distributed (data not shown), but the percentage of bacteria with polar distribution could not be determined since the low level of expression of these proteins on the bacterial surface prevented reliable quantitation.
![]() View larger version (72K): [in a new window] |
FIG. 4. Nonpolar distribution of IcsAi532 and IcsAi563 mutants on the surface of S. flexneri. IF microscopy of IcsA surface distribution. Log-phase cultures of S. flexneri strains expressing either IcsAWT or IcsAi were formalin fixed and labeled with anti-IcsA antibodies and Alexa 488-conjugated goat antirabbit secondary antibodies. For clarity, the IF image for each strain is accompanied by an overlay of the IF image with the corresponding phase-contrast image. Bar = 10 µm.
|
icsA strains expressing the mutated proteins to form plaques on HeLa cell monolayers. Plaque formation is an indication of intercellular spreading, a process that requires IcsA-dependent ABM. Eighteen of the S. flexneri strains expressing IcsAi proteins formed WT plaques (Table 2), indicating that linker insertions in these IcsAi mutants were located in functionally permissive sites. Twenty-two of the S. flexneri strains were unable to form plaques in three independent experiments (Table 2). These strains expressed IcsAi mutants with linker insertions either within the "GRR" region (aa 140 to 307) (IcsAi185, IcsAi219, IcsAi226, IcsAi228, IcsAi230, IcsAi244, IcsAi248, IcsAi268, IcsAi271, IcsAi292, and IcsAi297), the IcsB binding region (aa 320 to 433) (IcsAi330a, IcsAi330b, IcsAi342, IcsAi346, and IcsAi381), within polar localization region 2 (aa 507 to 620) (IcsAi532 and IcsAi563), or within or adjacent to the putative autochaperone domain (aa 634 to 735) (IcsAi633, IcsAi643, IcsAi677, and IcsAi716). The remaining strains had intermediate phenotypes, exhibiting a WT frequency of plaque formation but forming plaques that varied in size compared to the control. Strains expressing the mutants IcsAi56, IcsAi595, and IcsAi598 formed plaques that were smaller in diameter than those of bacteria expressing IcsAWT (30%, 51%, and 27% smaller, respectively). Additionally, while strains expressing IcsAi193, IcsAi288, IcsAi312, and IcsAi502 were unable to form plaques, they did form small foci of dead HeLa cells that were not observed for S. flexneri
icsA, suggesting that the mutants IcsAi193, IcsAi288, IcsAi312, and IcsAi502 still retained a limited capacity to promote intercellular spread (Table 2). Effect of linker insertions on IcsA function in N-WASP recruitment and F-actin comet tail formation. To further investigate the molecular basis for the defects in intercellular spreading exhibited by strains expressing IcsAi proteins, the ability of these strains to recruit host N-WASP and form F-actin comet tails was examined by IF microscopy using anti-N-WASP antibodies and FITC-phalloidin, respectively. Nineteen out of the 29 strains expressing IcsAi mutants were unable to either recruit N-WASP or form F-actin comet tails (Table 2). All of these strains had also been negative for plaque formation. This included strains expressing the mutant proteins IcsAi185, IcsAi219, IcsAi226, IcsAi230, IcsAi244, IcsAi248, IcsAi268, IcsAi271, and IcsAi297, with insertions within the GRR region, strains expressing IcsAi330a, IcsA330b, IcsAi342, IcsAi346, and IcsAi381, with linker insertions within the IcsB binding region, and strains expressing IcsAi532 and IcsAi563 with linker insertions within polar localization region 2.
Although a strain producing IcsAi346 was unable to form F-actin comet tails, capping of the bacterial pole with F-actin was observed, despite undetectable N-WASP recruitment (Table 2). Also, while they were unable to form detectable plaques or foci, F-actin tail formation was seen at a very low frequency (in <10% of infected cells) for strains producing IcsAi228, IcsAi292 (which had insertions located in the GRR region), and IcsAi633 (which had an insertion in the putative autochaperone region), and N-WASP recruitment could be detected only with the latter two mutants (Table 2). Strains producing IcsAi595 and IcsAi598 that had reduced levels of protein were readily able to recruit N-WASP (Table 2) and form F-actin comet tails (Fig. 5A).
![]() View larger version (60K): [in a new window] |
FIG. 5. F-actin comet tail formation by intracellular S. flexneri icsA strains expressing IcsA-i mutants. (A) IF microscopy of F-actin tail formation by intracellular S. flexneri icsA strain expressing IcsA-i mutants. HeLa cells infected with S. flexneri were labeled with anti-LPS antibodies and Alexa 594-conjugated donkey antirabbit antibodies, and F-actin was labeled with FITC-phalloidin. Arrows indicate F-actin tail formation. Strains were assessed in three independent experiments. Scale bar = 10 µm. (B) Frequency of F-actin tail formation by S. flexneri icsA strains expressing IcsA-i mutants. HeLa cells were infected with S. flexneri strains and examined by IF microscopy as detailed in Materials and Methods. The frequency of F-actin tail formation was determined by observing the percentage of infected HeLa cells (n = 100) that had at least 1 F-actin tail. Data represent means ± standard errors. *, P < 0.05; ***, P < 0.001 (determined by Student's unpaired two-tailed t test). Data are from three independent experiments.
|
Effect of LPS Oag on F-actin comet tail formation and N-WASP recruitment by S. flexneri expressing IcsA mutants.
We have previously shown that smooth-LPS (S-LPS) populations, possessing the Oag component, can mask IcsA function (31, 32). Therefore, it was of interest to determine if IcsAi mutants that were unable to recruit N-WASP in an S-LPS background could do so in an S. flexneri strain that has only "rough" LPS (R-LPS) populations that lack the Oag component. Furthermore, it was of interest to determine if expression of IcsAi mutants in this background would restore the ability of these IcsAi mutants to form F-actin comet tails. Sixteen IcsAi mutants (Table 2) that were either unable or had a reduced ability to recruit N-WASP and induce F-actin comet tails were expressed in an R-LPS S. flexneri
icsA
rmlD strain (RMA2043), and the intracellular behavior of each strain was examined by IF microscopy.
Remarkably, when either the IcsAi185, IcsAi226, IcsAi532, or IcsAi563 mutants were expressed in an R-LPS S. flexneri
icsA
rmlD strain, F-actin comet tail formation and N-WASP recruitment were observed (Fig. 6; Table 2), albeit at a lower frequency (10 to 20% of infected cells contained F-actin comet tails) than with the S. flexneri
icsA
rmlD strain expressing IcsAWT (RMA2107; Table 1) (54% of infected cells had F-actin comet tails). For IcsAi228, N-WASP recruitment could not be detected when this mutant was expressed in an S-LPS S. flexneri
icsA strain, despite this strain occasionally forming F-actin comet tails (Table 2). However, when IcsAi228 was expressed in the R-LPS S. flexneri
icsA
rmlD strain, N-WASP recruitment could be detected and F-actin comet tail formation occurred more frequently (albeit still at a lower frequency than with the S. flexneri
icsA
rmlD strain expressing IcsAWT). Additionally, for the S. flexneri
icsA
rmlD strain expressing IcsAi271, N-WASP recruitment could be detected, albeit faintly (Table 2). For the remaining R-LPS strains that were investigated, N-WASP recruitment and F-actin comet tail formation could not be detected (Table 2).
![]() View larger version (71K): [in a new window] |
FIG. 6. N-WASP recruitment and F-actin comet tail formation by intracellular S. flexneri strains expressing the IcsAi proteins with either smooth or rough LPS. IF microscopy of F-actin tail formation and N-WASP recruitment by intracellular S. flexneri strains expressing IcsA-i mutants. HeLa cells were infected with S. the flexneri icsA (S-LPS) or S. flexneri icsA rmlD (R-LPS) strain expressing IcsAi proteins and formalin fixed. Bacteria were labeled with DAPI (blue), F-actin was labeled with FITC-phalloidin (green), and N-WASP was labeled with anti-N-WASP and Alex 594-conjugated donkey antirabbit antibodies (red) as detailed in Materials and Methods. Arrows indicate F-actin tail formation and N-WASP recruitment. Strains were assessed in two independent experiments. Bar = 10 µm.
|
103-320, IcsA
508-730, and IcsA
103-507 were unable to induce F-actin comet tail formation when expressed by an S-LPS S. flexneri
icsA strain, although IcsA
508-730 did induce F-actin accumulation. Furthermore, the latter mutant was reported to recruit N-WASP, while the others did not (49, 50). Hence, plasmids encoding IcsA
103-320 (pD10-virG1), IcsA
508-730 (pD10-virG3), and IcsA
103-507 (pD10-virG4) were expressed in an R-LPS S. flexneri
icsA
rmlD strain (RMA2043), and N-WASP recruitment and F-actin comet tail formation were examined. As reported previously for S-LPS strains, when these proteins were expressed in an R-LPS background, none of the IcsA deletion mutant proteins were able to induce F-actin tail formation (Fig. 7; Table 3). The N-WASP recruitment and circumferential accumulation of F-actin observed when IcsA
508-730 was expressed in an S-LPS S. flexneri background were also observed when this construct was expressed in an R-LPS background (Fig. 7; Table 3). Surprisingly, though, the other two mutants, IcsA
103-320 and IcsA
103-507, also exhibited a low level of N-WASP recruitment when expressed in an R-LPS S. flexneri strain (Fig. 7; Table 3). These results indicate that these deletion mutations retain some residual N-WASP recruitment activity that is masked in an S-LPS background.
![]() View larger version (46K): [in a new window] |
FIG. 7. N-WASP recruitment and F-actin comet tail formation by intracellular S. flexneri strains expressing IcsA deletion mutant proteins with either smooth or rough LPS. IF microscopy of F-actin tail formation and N-WASP recruitment by intracellular S. flexneri strains expressing IcsA mutants. HeLa cells were infected with S. flexneri icsA (S-LPS) or S. flexneri icsA rmlD (R-LPS) strains expressing IcsA deletion mutant proteins and formalin fixed. Bacteria were labeled with DAPI (blue), F-actin was labeled with FITC-phalloidin (green), and N-WASP was labeled with anti-N-WASP and Alex 594-conjugated donkey antirabbit antibodies (red) as detailed in Materials and Methods. Arrows indicate F-actin tail formation or N-WASP recruitment. Strains were assessed in two independent experiments. Bar = 10 µm.
|
|
View this table: [in a new window] |
TABLE 3. F-actin comet tail formation and N-WASP recruitment by R-LPS S. flexneri icsA rmlD strains expressing IcsAi mutants
|
|
|
|---|
Of the 47 IcsAi mutants that were created in this study, 6 proteins (IcsAi595, IcsAi598, IcsAi633, IcsAi643, IcsAi677, and IcsAi716) demonstrated reduced production of both cell-associated and secreted forms in S. flexneri. However, production of IcsAi595, IcsAi598, and IcsAi633 was restored to WT levels when they were expressed in E. coli UT5600 (
ompP
ompT), consistent with the hypothesis that these proteins may be sensitive to degradation by endogenous OM proteases. Production of IcsAi643, IcsAi677, and IcsAi716 was still greatly reduced in E. coli UT5600, suggesting sensitivity to degradation by periplasmic proteases, such as DegP. Indeed, DegP has been implicated in IcsA export (20, 43, 44). Additionally, all six mutants demonstrated increased sensitivity to trypsin. A change in protease accessibility of these mutants implies a conformational alteration compared to IcsAWT. Oliver et al. (39) have previously described a putative intramolecular chaperone region of the passenger domain conserved between several AT proteins, including IcsA (aa 634 to 735). In the B. pertussis AT protein, BrkA, deletion of this autochaperone region (aa 601 to 692) made the protein susceptible to degradation by OM proteases and trypsin. Similarly, this has also been shown for homologous regions within other autotransporter proteins, SSP, Pet, and AIDA-1 (3, 12, 38). The role of this region in IcsA biogenesis had not been previously investigated. Our study provides the first experimental evidence implicating this region of IcsA as a putative autochaperone domain. Owing to the associated production defect, it was not possible to determine the contribution of this region to N-WASP recruitment and F-actin comet tail formation.
Two regions of the passenger domain (aa 1 to 104 and aa 507 to 620) have previously been attributed to polar localization of IcsA (9, 51). We have identified two mutants, IcsAi532 and IcsAi563, with altered IcsA localization on the surface of S. flexneri. Both of these mutants possessed linker insertions within polar localization region 2 (aa 507 to 620); three mutants (IcsAi56, IcsAi81, and IcsAi87) that possessed linker insertions within polar localization region 1 (aa 1 to 104) were all polarly distributed. Our data suggest that polar targeting region 1 is not able to compensate for mutational alterations in region 2. These results refute the significance of polar targeting region 1, which has previously been reported to be targeted to the pole independently of polar targeting region 2 (9).
Another significant finding from our study was that the interaction between N-WASP and some IcsAi and IcsA
proteins inside host cells was influenced by LPS Oag. By assessing protein function in an R-LPS background, we were able to account for masking of mutant proteins by LPS Oag when interpreting the resulting phenotypes. The mutants IcsAi185, IcsAi226, IcsAi532, and IcsAi563 were unable to recruit N-WASP and induce F-actin comet tails when expressed in S-LPS S. flexneri
icsA strains. However, these mutants were able to recruit N-WASP and form F-actin tails in an R-LPS S. flexneri background (albeit at a lower frequency than R-LPS S. flexneri expressing IcsAWT). Additionally, the IcsA
103-320 and IcsA
103-507 deletion mutants examined in our study, although unable to recruit N-WASP when expressed by S-LPS S. flexneri, were able to recruit N-WASP when expressed by R-LPS S. flexneri strains. Hence, mutations in IcsA that abolish N-WASP recruitment do not necessarily indicate mutational alteration of N-WASP binding regions of IcsA but may be due to LPS-Oag-dependent interference in IcsA-N-WASP interactions, possibly due to conformational alterations or truncation of mutant proteins.
In our study, the ability of mutants to facilitate F-actin comet tail formation correlated with N-WASP recruitment. However, we identified icsAi mutants that had proficient F-actin comet tail formation but were defective in intercellular spread. The molecular basis of this defect is currently under investigation, but these findings highlight the need for intercellular spreading to be directly assessed when determining the relative contributions of various host and bacterial factors to the process of ABM.
The region spanning aa 103 to 433 of IcsA has previously been shown to be adequate for N-WASP binding, as established by in vitro pull-down assays (49, 50), and IcsA aa 53 to 508 are sufficient to induce actin polymerization during in vitro assays (17). Therefore, it was not surprising that most of the linker insertions within this region disrupted IcsA function in N-WASP recruitment and ABM. Fifteen IcsAi mutants had linker insertions within the GRR region (aa 140 to 307), and nine of these mutant proteins (IcsAi185, IcsAi219, IcsAi226, IcsAi230, IcsAi244, IcsAi248, IcsAi268, IcsAi271, and IcsAi297) were to unable induce N-WASP recruitment and F-actin comet tail formation when expressed by S. flexneri in infected cells. Although deletion of aa 104 to 226 has been reported to abolish F-actin comet tail formation (51), this had not been correlated with N-WASP recruitment. Data from our study confirm the involvement of this region in N-WASP recruitment. Five mutants (IcsAi330a, IcsA330b, IcsAi342, IcsAi346, and IcsAi381) with linker insertions within the IcsB binding region (aa 320 to 433) were also unable either to form plaques or F-actin comet tails or to recruit N-WASP when expressed by S. flexneri. These icsAi mutants differ phenotypically from the icsB mutants from previous studies (36, 37), which were unable to form plaques in tissue culture monolayers but were able to form F-actin tails and exhibit actin-based motility at a frequency similar to that of the WT up to 3 h postinfection (37).
Significantly, we observed that an R-LPS S. flexneri strain expressing IcsA
103-507 exhibited a low level of N-WASP recruitment. Since this deletion mutation removes both the GRR region and the IcsB regions, it suggests that an additional region(s) was involved in N-WASP recruitment. Deletion of aa 508 to 730 of IcsA has previously been shown to affect F-actin comet tail formation (51). However, the IcsA
508-730 mutant also displayed aberrant localization on the surface of bacteria, complicating the interpretation of this mutant's phenotype (51). Indeed, the authors of that paper suggested that the defect in F-actin comet tail formation resulted from nonpolar localization of IcsA. Our study has identified two mutants, IcsAi532 and IcsAi563, which are also nonpolarly expressed on the surface of S. flexneri and are unable to induce F-actin comet tail formation in S-LPS strains (like IcsA
508-730). However, F-actin comet tail formation was restored, albeit at a low frequency, when these mutants were expressed in an R-LPS strain. The same was not observed for IcsA
508-730, which was unable to induce F-actin comet tail formation in R-LPS strains. The latter indicates that an additional defect occurs as a result of deleting this region that is independent of the effect on IcsA polarity.
The results of our study suggest a previously unidentified region of IcsA (aa 508 to 730) is important for N-WASP recruitment and F-actin comet tail formation, and this warrants further investigation. We propose a model to reconcile this data, in which multiple regions of IcsA are required for N-WASP recruitment. Our model is supported by the demonstration that WASP homology domain 1 and the Cdc42/Rac interactive binding domain of N-WASP are independently recruited to S. flexneri inside N-WASP-deficient cell lines or HeLa cells (25, 30). The determination of the structure of IcsA and IcsA in complex with N-WASP (with and without LPS Oag) would clearly assist our understanding of the binding process.
This work was supported by a project grant from the National Health and Medical Research Council of Australia awarded to R.M. K.L.M. was the recipient of a Faculty of Science Postgraduate Scholarship from the University of Adelaide.
Published ahead of print on 2 May 2008. ![]()
Supplemental material for this article may be found at http://jb.asm.org/. ![]()
|
|
|---|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Copyright © 2009 by the American Society for Microbiology. For an alternate route to Journals.ASM.org, visit: http://intl-journals.asm.org | More Info»