Previous Article | Next Article ![]()
Journal of Bacteriology, November 2008, p. 7012-7021, Vol. 190, No. 21
0021-9193/08/$08.00+0 doi:10.1128/JB.00667-08
Copyright © 2008, American Society for Microbiology. All Rights Reserved.
,
Department of Biochemistry and Molecular Biology, Medical College of Georgia, Augusta, Georgia 30912,1 Department of Pharmacology and Molecular Sciences, The Johns Hopkins University School of Medicine, Baltimore, Maryland 21205,2 Department of Molecular Genetics and Microbiology, The University of Texas at Austin, Austin, Texas 787123
Received 13 May 2008/ Accepted 20 August 2008
|
|
|---|
|
|
|---|
LPS consists of three domains known as lipid A, core, and O antigen (23, 24). For the majority of gram-negative bacteria, production of LPS is necessary for cell growth and viability. The synthesis of "typical" enterobacterial lipid A has been well characterized in E. coli and occurs by a nine-step enzymatic pathway. For the most part, the nine lipid A biosynthetic enzymes are conserved throughout all gram-negative bacteria. Therefore, the majority of gram-negative bacteria are capable of synthesizing a lipid A species closely resembling that of E. coli (Fig. 1) (23, 24).
![]() View larger version (13K): [in a new window] |
FIG. 1. Comparison of E. coli K-12 lipid A to H. pylori minor and major lipid A species. The lipid A of E. coli and the minor lipid A species of H. pylori have very similar structures. The minor lipid A species of H. pylori is then modified by several enzymes, resulting in a reduction in the number of Kdo sugars, phosphate groups, and acyl chains producing the major lipid A species.
|
|
|
|---|
-32P]ATP and 32Pi were obtained from GE Healthcare. Silica Gel 60 (0.25 mm) thin-layer plates were purchased from EM Separation Technology (Merck). Luria-Bertani (LB) agar and LB broth were from EMD Chemicals. Brucella broth was from Becton Dickinson, and M9 minimal salts were from Difco. Triton X-100 and bicinchoninic acid were from Pierce. All other chemicals were reagent-grade and were purchased from either Sigma or Mallinckrodt.
Bacterial strains and growth conditions.
The bacterial strains and plasmids used in this study are summarized in Table 1. H. pylori strains J99 and 26695 were obtained from the American Type Culture Collection. The H. pylori clinical isolate Hp7-91 was obtained from a human gastric biopsy specimen, as previously described (32). Primary plate cultures of H. pylori were grown from methyl cellulose stock on blood agar medium at 37°C for 36 to 60 h in a microaerobic atmosphere (5% O2, 10% CO2, and 85% N2). The resultant colonies were inoculated into brucella broth supplemented with 7% fetal bovine serum (HyClone) and vancomycin (10 µg/ml). Cells were grown to an A600 of
1.0 at 37°C under microaerobic conditions for 24 to 36 h. Prior to every experiment, confirmation of H. pylori was performed by both Gram's staining and a urease test (14). E. coli was typically grown at 37°C in LB broth (18). The E. coli late acyl transferase mutants MKV15, MKV13, and MLK1067 were grown as previously described (38) in M9 minimal medium at 30°C. When required for selection of plasmids, cells were grown in the presence of ampicillin (100 µg/ml).
|
View this table: [in a new window] |
TABLE 1. Bacterial strains and plasmids used in this study
|
Overexpression of the late acyl transferases (Jhp0265 and Hp0280) behind a T7lac promoter. The late acyl transferase genes of H. pylori J99 (jhp0265) and H. pylori 26695 (hp0280) were separately subcloned into pET21a (Novagen) behind the T7lac promoter. The genes were PCR amplified using genomic DNAs as templates. Sequences of primers are shown in Table S1 in the supplemental material. The PCR products and the vector were digested with NdeI and BamHI and ligated overnight at 16°C using T4 DNA ligase (New England BioLabs) to give pET21jhp0265 and pET21hp0280. pET21jhp0265 and pET21hp0280 were transformed into XL-1 Blue (Stratagene) for propagation of the plasmids. pET21jhp0265 and pET21hp0280 were then transformed into MKV15 (DE3) (Table 1) for overexpression of the protein. MKV15 was made DE3-lysogenic using a DE3 Lysogenization Kit (Novagen), according to the manufacturer's instructions.
Cloning of Jhp0265 and Hp0280 into the high-copy-number vector pBluescript SK II(+). The jhp0265 and hp0280 coding regions, along with a ribosomal binding site, were excised from the plasmids pET21jhp0265 and pET21hp0280 using XbaI and XhoI. The gene fragments were ligated overnight with pBluescript SK II(+), at 16°C using T4 DNA Ligase (New England BioLabs) to give pBLUEjhp0265 and pBLUEhp0280. pBLUEjhp0265 and pBLUEhp0280 were transformed into XL-1 Blue (Stratagene) for propagation of the plasmids. pBLUEjhp0265 and pBLUEhp0280 were then transformed into MKV13, MKV15, and MLK1067 to be used in radiolabeling experiments.
Preparation of cell-free extracts, double-spun cytosol, and washed membrane.
Typically, 500 ml of H. pylori or 200 ml of E. coli cultures was grown to an A600 of
1.0 at 37°C and harvested by centrifugation at 6,000 x g for 30 min. All samples were prepared at 4°C. Cell extract, membrane-free cytosol, and washed membranes were prepared as previously described (35) and were stored in aliquots at –20°C. Protein concentration was determined by the bicinchoninic acid method (27), using bovine serum albumin as the standard.
Construction of H. pylori 26695 and J99 late acyl transferase (hp0280 and jhp0265) defective mutants. The jhp0265 gene and its flanking sequences, including 997 bp upstream and 1,016 bp downstream, were amplified by PCR (primers 1 and 2) from H. pylori J99 genomic DNA using Pfu Turbo (Stratagene) according to the manufacturer's instructions. The amplimer was digested with BamHI and EcoRI, gel purified, and subsequently cloned into the high-copy-number phagemid vector, pBluescript II SK(+) (Stratagene), resulting in the plasmid pBSjhp0265. The vector pBSjhp0265 was then subjected to site-directed mutagenesis, using a QuikChange XL Site-Directed Mutagenesis Kit (Stratagene), to create a BglII (primers 3 and 4) restriction site (pBSjhp0265B). In order to disrupt the jhp0265 gene, a kanamycin resistance cassette (kan) obtained by PCR (primers 5 and 6) from an E. coli-H. pylori shuttle vector (pHel3) (13) was inserted into the BglII and NarI sites of pBSjhp0265B. The resulting plasmid, pBSjhp0265::kan, containing an interrupted jhp0265 gene, was transformed into H. pylori 26695 and J99 by natural transformation (11), and resistant colonies were selected on blood agar plates containing 8 µg/ml of kanamycin. Resistant colonies were repurified on kanamycin-containing plates, and the successful insertion of the resistance cassette was verified by PCR of genomic DNA.
Construction of H. pylori 26695 and J99 3'-O-deacylase (hp0694 and jhp0634) defective mutants. In a comparison of the gene sequences of H. pylori lpxR homologs found in the microbial database, the 26695 homolog (hp0694) was determined to have a truncation of 237 nucleotides. However, sequencing data using genomic DNA from strain 26695 showed that the reported sequence was missing a thymine between nucleotides 770 and 771, predicting a false stop codon. Using the corrected sequence, we found that hp0694 encodes a full-length homolog of lpxR similar to that of jhp0634 from H. pylori strain J99. The hp0694 gene and its flanking sequences, including 734 bp upstream and 579 bp downstream, were amplified by PCR (primers 7 and 8) from H. pylori 26695 genomic DNA using Pfu Turbo (Stratagene) according to the manufacturer's instructions. The amplimer was digested with XbaI and EcoRI, gel purified, and subsequently cloned into the high-copy-number phagemid vector, pBluescript II SK(+) (Stratagene), resulting in the plasmid pBShp0694. The vector pBShp0694 was then subjected to site-directed mutagenesis, using a QuikChange XL Site-Directed Mutagenesis Kit (Stratagene), to create an NdeI (primers 9 and 10) restriction site (pBShp0694N). In order to disrupt the hp0694 gene, a chloramphenicol resistance cassette (cam) obtained by PCR (primers 11 and 12) from an E. coli-H. pylori shuttle vector (pHel2) (13) was inserted into the NdeI and AvrII sites of pBShp0694N. The resulting plasmid, pBShp0694::cam, containing an interrupted hp0694 gene was transformed into H. pylori 26695 and J99 by natural transformation (11), and resistant colonies were selected on blood agar plates containing 8 µg/ml of chloramphenicol. Resistant colonies were repurified on chloramphenicol-containing plates, and the successful insertion of the resistance cassette was verified by PCR of genomic DNA.
Chromosomal complementation of J99/jhp0634. rdxA (hp0954) was chosen as the site for chromosomal complementation. RdxA is a nitroreductase that is capable of converting metronidazole from an inactive prodrug into its active form (26). The disruption and consequent inactivation of rdxA by insertion of jhp0634 renders the bacteria resistant to metronidazole because metronidazole can no longer be converted to its active form. hp0954 and its flanking sequences, including 435 bp upstream and 491 bp downstream, were amplified by PCR (primers 13 and 14) from H. pylori 26695 genomic DNA using Pfu Turbo (Stratagene) according to the manufacturer's instructions. The amplimer was digested with XbaI and XhoI, gel purified, and subsequently cloned into pET21a (Novagen), resulting in the plasmid pEThp0954. The vector pEThp0954 was then subjected to inverse PCR (primers 15 and 16) using Pfu Turbo (Stratagene) according to the manufacturer's instructions. The inverse PCR removes 218 bp from the middle of hp0954 and incorporates restriction sites at the ends of the remaining sequence to allow insertion of jhp0634. The inverse PCR amplimer was digested with BamHI and EcoRI, gel purified, and treated with Antarctic phosphatase. The jhp0634 gene was amplified by PCR (primers 17 and 18) from H. pylori J99 genomic DNA using Pfu Turbo (Stratagene) according to the manufacturer's instructions. The jhp0634 amplimer was digested with BamHI and EcoRI, gel purified, and subsequently ligated with the inverse PCR amplimer, resulting in the plasmid pET634comp. The completed pET634 plasmid pET634comp was transformed into H. pylori J99 by natural transformation (11), and resistant colonies were selected on blood agar plates containing 12 µg/ml of metronidazole. Resistant colonies were repurified on metronidazole-containing plates, and the successful insertion of the complementation cassette was verified by PCR of genomic DNA.
Preparation of radiolabeled substrates.
The substrate [4'-32P]lipid IVA was generated from 125 µCi of [
-32P]ATP and the tetra-acyl-disaccharide 1-phosphate lipid acceptor, using the overexpressed 4' kinase present in membranes of E. coli BLR(DE3)/pLysS/pJK2 as previously described (35). Kdo2-[4'-32P]lipid IVA was prepared by adding purified E. coli Kdo transferase (KdtA) immediately after the 4' kinase, as previously described (2). Kdo2-[4'-32P]lipid A was prepared by adding membranes of E. coli BLR(DE3)/HtrB and E. coli BLR(DE3)/MsbB and C12:0-acyl carrier protein (ACP) immediately after the Kdo transferase reaction, as previously described (35). Kdo2-lauroyl-[4'-32P]lipid IVA was prepared in the same way as Kdo2-[4'-32P]lipid A, except that E. coli BLR(DE3)/MsbB membranes were omitted, and the C12:0-ACP was added at a 1:1 molar ratio.
Assay of Jhp0265 activity.
Jhp0265 activity was assayed under optimized conditions in a 10-µl reaction mixture containing 50 mM HEPES, pH 7.5, 0.1% Triton X-100, 50 mM NaCl, 5 mM MgCl2, 0.1 mg/ml bovine serum albumin, 2.5 µM lipid A substrate ([4'-32P]lipid IVA, Kdo2-[4'-32P]lipid IVA, or Kdo2-[4'-32P]lipid A at
5,000 cpm/nmol) and either 5 µM ACPSH, C12:0-ACP, C14:0-ACP, C16:0-ACP, or C18:0-ACP. Washed MKV15 (DE3) pET21jhp0265 membranes at 0.01 mg/ml were employed as the enzyme source. Enzymatic reactions were incubated at 30°C for 30 min and terminated by spotting 4.5-µl portions of the mixtures onto Silica Gel 60 thin-layer chromatography (TLC) plates. The plates were dried under a cool air stream for 20 min.
When [4'-32P]lipid IVA was employed as the substrate, reaction products were separated using the solvent chloroform, pyridine, 88% formic acid, and water (50:50:16:5, vol/vol). The reaction products generated from substrates having the Kdo moiety were separated using the solvent chloroform, pyridine, 88% formic acid, and water (30:70:16:10, vol/vol). TLC plates were exposed overnight to a PhosphorImager screen, and product formation was detected and analyzed using a Bio-Rad Molecular Imager PhosphorImager equipped with Quantity One software. The enzyme activity was calculated by determining the percentage of the substrate converted to product.
Assay of unknown acyl transferase activity.
The unknown acyl transferase activity was assayed under optimized conditions in a 10-µl reaction mixture containing 50 mM HEPES, pH 8, 0.2% Triton X-100, 1 mM EDTA, 1 mM dithiothreitol, 2.5 µM lipid A substrate ([4'-32P]lipid IVA, Kdo2-[4'-32P]lipid IVA, Kdo2-lauroyl-[4'-32P]lipid IVA, or Kdo2-[4'-32P]lipid A at
5,000 cpm/nmol) and either 5 µM ACPSH, C12:0-ACP, C14:0-ACP, or C18:0-ACP. Washed membranes from H. pylori strain Hp7-91/hp0021::cam (34) at 1 mg/ml were employed as the enzyme source, as indicated in Fig. 6. Enzymatic reactions were incubated at 30°C for 60 min and terminated by spotting 4.5-µl portions of the mixtures onto Silica Gel 60 TLC plates. The plates were dried under a cool air stream for 20 min.
![]() View larger version (41K): [in a new window] |
FIG. 6. Demonstration of a second lipid A late acyl transferase in H. pylori membrane fractions. H. pylori membranes lacking a functional 1-phosphatase (Hp0021) were assayed for late acyl transferase activity with either 2.5 µM lauroyl Kdo2-[4'-32P]lipid IVA-5 µM acyl-ACPs (A) or 2.5 µM [4'-32P]lipid IVA-5 µM acyl-ACPs (B). The lauroyl (C12:0) group is attached at the 2' position of the substrate used in panel A.
|
Isolation and analysis of lipid A species from 32Pi-labeled cells.
MKV13, MKV15, and MLK1067 cells containing pBLUEjhp0265, pBLUEhp0280, and vector controls were grown in G56 minimal medium at 30°C. The cultures were labeled uniformly with 2.5 µCi/ml 32Pi and induced with 0.5 mM isopropyl-β-D-thiogalactopyranoside after 2 h of growth. Bacteria were harvested using a clinical centrifuge and washed with 5 ml of phosphate-buffered saline (pH 7.4). 32P-labeled lipid A was isolated using published protocols (31) and spotted onto a Silica Gel 60 TLC plate (
10,000 cpm/lane). Lipids were separated using a solvent consisting of chloroform, pyridine, 88% formic acid, and water (50:50:16:5, vol/vol). The TLC plates were exposed overnight to a PhosphorImager screen, and product formation was detected and analyzed using a Bio-Rad Molecular Imager PhosphorImager equipped with Quantity One software.
Large-scale isolation of lipid A for mass spectrometry analysis. Cultures (500 ml) of each strain were grown overnight at 37°C. Cells were harvested by centrifugation at 6,000 x g for 30 min and washed once with phosphate-buffered saline. The final cell pellets were resuspended in 20 ml of phosphate-buffered saline. Lipid A was released from cells and purified as described previously (34) and stored frozen at –20°C.
Mass spectrometry of lipid A species.
Mass spectra of purified lipids were acquired in the negative ion linear mode using a matrix-assisted laser desorption-ionization-time of flight (MALDI-TOF) mass spectrometer (AXIMA-CFR; Kratos Analytical, Manchester, United Kingdom), equipped with a nitrogen laser (337 nm). The instrument was operated using 20-kV extraction voltage and time-delayed extraction, providing a mass resolution of about ±1 atomic mass units for compounds with an Mr of
2,000. Each spectrum represented the average of 100 laser shots, and saturated 6-aza-2-thiothymine in 50% acetonitrile and 10% tribasic ammonium citrate (9:1, vol/vol) served as the matrix. The samples were dissolved in chloroform-methanol (4:1, vol/vol) and deposited on the sample plate, followed by an equal portion of matrix solution (0.3 µl). The sample was dried at 25°C prior to mass analysis.
|
|
|---|
![]() View larger version (34K): [in a new window] |
FIG. 2. Enzymatic assays to investigate Jhp0265 functionality. MKV15 (DE3) pET21jhp0265 membranes were assayed with either 2.5 µM Kdo2-[4'-32P]lipid IVA-5 µM acyl-ACPs (A), 2.5 µM [4'-32P]lipid IVA-5 µM acyl-ACPs (B), or 2.5 µM Kdo2-[4'-32P]lipid IVA-5 µM acyl-CoAs (C). Appearance of a faster migrating, more hydrophobic, reaction product indicates acyl transferase activity.
|
In vivo analyses in E. coli show that Jhp0265 is an LpxL homologue. The level of specificity for E. coli LpxL and LpxM, described above, becomes more complex when we take into account the position at which each enzyme adds an acyl chain. LpxL specifically transfers an acyl chain to the hydroxyl group of the 2' acyl chain of lipid A, and LpxM preferentially transfers an acyl chain to the hydroxyl group of the 3' acyl chain of lipid A. The order of each addition is also predetermined because LpxM works efficiently only after a secondary acyl chain has been transferred to Kdo2-lipid IVA by LpxL (7, 8, 38). The in vitro data for Jhp0265 presented so far would suggest that Jhp0265 is an LpxL homologue, given that Jhp0265 preferentially transfers a C18:0 acyl-ACP and the published H. pylori lipid A structure shows a C18:0 secondary acyl chain linked to the 2' acyl chain (Fig. 1). A series of E. coli late acyl transferase mutants were used to confirm this assumption in an in vivo setting. E. coli MKV15 (lpxL lpxP lpxM) has a tetra-acylated lipid A structure (Fig. 3A) (38). E. coli MKV13 (lpxL lpxP) has both tetra- and penta-acylated lipid A structures since some residual LpxM activity is present in vivo (Fig. 3A) (37). Finally, E. coli MLK1067 (lpxM) has a penta-acylated lipid A structure (Fig. 3A) (15). Each strain expressing jhp0265 was radiolabeled with 32Pi, along with a vector control, as described in Materials and Methods. The lipid A was then isolated and visualized using a PhosphorImager. If Jhp0265 adds to the 2' position, as does E. coli LpxL, the MKV15 mutant expressing jhp0265 would produce a penta-acylated lipid A species, instead of the tetra-acylated species of the vector control (Fig. 3A). The MKV13 mutant overexpressing jhp0265 would be able to make a hexa-acylated lipid A species because addition of an acyl chain by Jhp0265 would allow the endogenous LpxM enzyme to function efficiently (Fig. 3A). MLK1067 overexpressing jhp0265 should show no change in the number of acyl chains because it already has a functional LpxL (Fig. 3A). The results shown in Fig. 3B through D show that all of the above conditions are met, confirming that Jhp0265 adds to the 2'-linked acyl chain and is, therefore, an LpxL homologue.
![]() View larger version (22K): [in a new window] |
FIG. 3. Radiolabeling of E. coli late acyl transferase mutants overexpressing Jhp0265. The center column of panel A shows a cartoon representation of the lipid A species from each of the E. coli lipid A late acyl transferase mutants. The left and right columns demonstrate the expected lipid A structures after expression of Jhp0265. On the left side, it is assumed that Jhp0265 behaves like LpxL, and on the right side, it is assumed that Jhp0265 behaves like LpxM. Each strain was radiolabeled using 2.5 µCi/ml inorganic 32Pi. (B to D) Lipid A was isolated from the indicated strain, separated by TLC, and visualized using a PhosphorImager.
|
![]() View larger version (33K): [in a new window] |
FIG. 4. MALDI-TOF mass spectrometry of H. pylori lipid A late acyl transferase mutants. Panels A and C show spectra for wild-type strains J99 and 26695, respectively. The major ion in panel A is m/z 1,549, and the major ion in panel C is m/z 1,548, which corresponds to the predicted molecular weight (MW) for wild-type H. pylori (1549.2). Panels B and D show spectra for mutant strains J99/jhp0265::cam and 26695/hp0280::cam, respectively. Both mutants have a major ion peak at m/z 1,549, which corresponds to an H. pylori wild-type lipid A structure.
|
The function of Jhp0634 was investigated in H. pylori J99 by mass spectrometric analysis of the lipid A isolated from a jhp0634 knockout mutant. The jhp0634 mutant synthesized a hexa-acylated lipid A (Fig. 5A), confirming that Jhp0634 was in fact a lipid A 3'-O-deacylase. An identical result was obtained upon deletion of Hp0694, the LpxR homolog in H. pylori strain 26695 (Fig. 5B). Chromosomal complementation of the jhp0634 mutant by insertion of a wild-type copy of jhp0634 into rdxA (jhp0954) (see Materials and Methods) restored the tetra-acylated lipid A phenotype in strain J99 (Fig. 5C), ruling out any polar effects. jhp0265 was then knocked out in the J99/jhp0634::cam background, producing a double mutant. The lipid A isolated from the jhp0634 jhp0265 double mutant was analyzed by mass spectrometry (Fig. 5D). As hypothesized above, the double mutant was penta-acylated and lacked a C18:0 fatty acyl chain at the 2' position. This is consistent with the in vitro data and confirms that Jhp0265 functions as a lipid A late acyltransferase in whole cells.
![]() View larger version (35K): [in a new window] |
FIG. 5. MALDI-TOF mass spectrometry of H. pylori lipid A acyl chain mutants. Panels A and B show 26695 and J99 3'-O-deacylase mutants, respectively. Both spectra have a major ion peak at m/z 2,012, corresponding to a hexa-acylated lipid A species, showing inactivation of the 3'-O-deacylase. In panel C the complemented J99 3'-O-deacylase mutant is shown. A major ion peak at m/z 1,548.9 indicates that the complemented mutant has reverted back to a wild-type phenotype. Panel D shows the spectrum of a J99 jhp0634 jhp0265 double mutant. The major ion peak at m/z 1,747.8 indicates that the double mutant is penta-acylated. MW, molecular weight.
|
|
|
|---|
We have also demonstrated that H. pylori expresses a second lipid A late acyl transferase catalyzing the addition of a C12:0 or C14:0 fatty acyl chain; however, its enzymatic properties differ greatly from those of E. coli LpxM. The most striking difference is that the second lipid A late acyl transferase can transfer an acyl chain to lipid IVA in vitro. This means that the order of function for the late acyltransferases cannot be determined (Fig. 7) and opens the question as to how H. pylori ensures that a hexa-acylated lipid A species makes it to the outer membrane. The most likely answer is that the inner membrane flippase, MsbA (10), can efficiently transport only a hexa-acylated lipid A species.
![]() View larger version (18K): [in a new window] |
FIG. 7. Final stages of lipid A synthesis in H. pylori. Because of the less stringent substrate specificity of the unidentified lipid A late acyl transferase of H. pylori, three possible pathways exist. This contradicts the previously established pathway, elucidated in E. coli, which occurs in a very specific and ordered manner.
|
Mass spectrometry was carried out at the Middle Atlantic Mass Spectrometry Laboratory at the Johns Hopkins School of Medicine.
Published ahead of print on 29 August 2008. ![]()
Supplemental material for this article may be found at http://jb.asm.org/. ![]()
|
|
|---|
This article has been cited by other articles:
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Copyright © 2009 by the American Society for Microbiology. For an alternate route to Journals.ASM.org, visit: http://intl-journals.asm.org | More Info»