Previous Article | Next Article ![]()
Journal of Bacteriology, November 2008, p. 7117-7122, Vol. 190, No. 21
0021-9193/08/$08.00+0 doi:10.1128/JB.00871-08
Copyright © 2008, American Society for Microbiology. All Rights Reserved.

Department of Molecular Microbiology and Biotechnology, Life Sciences, Tel Aviv University, Tel Aviv, Israel 69978
Received 25 June 2008/ Accepted 26 August 2008
|
|
|---|
32. FtsH is the only known E. coli protease that is essential, as it regulates the concentration of LpxC, which carries out the first committed step in the synthesis of lipid A. Here we identify a new FtsH substrate—3-deoxy-D-manno-octulosonate (KDO) transferase—which carries out the attachment of two KDO residues to the lipid A precursor (lipid IVA) to form the minimal essential structure of the lipopolysaccharide (LPS) (KDO2-lipid A). Thus, FtsH regulates the concentration of the lipid moiety of LPS (lipid A) as well as the sugar moiety (KDO-based core oligosaccharides), ensuring a balanced synthesis of LPS. |
|
|---|
32 and the viral regulatory proteins CII, CIII, and Xis (5, 14, 15, 21, 35, 37). However, although FtsH regulates the concentration of several key proteins, the spectrum of its specific substrates is quite limited.
FtsH is the only known essential ATP-dependent protease in E. coli. The lack of viability of
ftsH mutants is due to the accumulation of UDP-3-O-acyl-N-acetylglucosamine deacetylase (LpxC), which catalyzes the second reaction and the first committed step in the biosynthesis of lipid A (9, 30). The accumulation of LpxC results in unbalanced ratio of lipid A (in the biosynthesis of lipopolysaccharides [LPS]) to phospholipids, as both pathways use the same precursor (-3-hydroxymyristoyl-acyl carrier protein), which is present in limited amounts (30).
LPS is an essential component of the outer membrane of gram-negative bacteria and is present in high concentrations (about 10% of the total cell lipids). LPS is vital for bacterial pathogenesis, as virulence of mutants with altered LPS is substantially decreased or eliminated. Moreover, LPS—also referred to as endotoxin—is highly toxic and constitutes the major lethal factor in gram-negative bacterial sepsis (24, 27, 33, 34).
LPS is composed of lipid A and core oligosaccharides which start with 2 units of 3-deoxy-D-manno-octulosonate (KDO). The KDO residues are transferred in two sequential steps to lipid IVA, the lipid A precursor, by the bifunctional enzyme KDO transferase (KdtA) (4). KDO2-lipid A represents the minimal essential structure of the LPS and, therefore, KdtA is the only essential glycosyltransferase in the core oligosaccharide biosynthesis pathway. It should be noted that recent results indicate the abilities of several suppressor mutations to overcome the requirement for KDO (23).
Here we show that KdtA is subject to ATP-dependent proteolysis carried out by FtsH. This finding broadens the spectrum of known specific FtsH substrates. As FtsH is known to degrade LpxC, the finding that it also degrades KdtA reinforces its role as a regulator of LPS biosynthesis, as it effectively controls the concentrations of both the lipid A precursor and the precursor of sugar moiety (KDO).
|
|
|---|
|
View this table: [in a new window] |
TABLE 1. Bacterial strains
|
Construction of the kdtA::FLAG strain. Chromosomal epitope tagging of kdtA was achieved using the system described by Uzzau et al. (38). Primers containing the fabZ promoter sequence upstream of the kdtB coding sequence were designed. A two-step PCR method was applied in which the pSUB11 plasmid served as a primary template, and the following primers were used: kdtA FLAG F, CGTCTGCTTCAACTGCTGGAACCTTACCTGCCACCGAAAACGCATGACTACAAAGACCATGACGG; and kdtA FLAG R1, ACAATAATAACACGGCCTGCCGCAATCGTAAGAATGAGACAGGCCGTAAAGTTTGGCGAACAAAAGATGGCATATGAATATCCTCCTTAG. The PCR product was used as a template for the second reaction using the same forward primer and the reverse primer kdtA FLAG R2, TGGGATCGAAAGTACCCGGATAAATCGCCCGTTTTTGCATGATACTCTTCCTGTCAAAATATAAGAAACGACAATAATAACACGGCCTG.
The kanamycin-resistant cassette achieved was then introduced by electroporation into competent cells containing the plasmid pKD46, and selection for kanamycin was applied. The colonies positive for kanamycin resistance were further verified by PCR and sequencing. The kanamycin-resistant cassette was then flipped out using the plasmid pCP20.
SDS-PAGE and immunoblotting. Gel electrophoresis was carried out according to published protocols using 10% sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE). Mouse monoclonal anti-FLAG antibodies (Sigma, Ltd.) were used as the primary antibody, and horseradish peroxidase-conjugated anti-mouse immunoglobulin G was used as the secondary antibody. Detection was performed with the EZ-ECL chemiluminescence detection kit (Biological Industries, Israel). The films were scanned, and the bands were quantified by densitometry.
In vivo protein degradation assays. Cultures were grown exponentially. When turbidity reached an OD600 of 0.4, rifampin (200 µg/ml) and spectinomycin (300 µg/ml) were added to block transcription and translation, respectively. Samples (1 ml) were removed at intervals and centrifuged, and the pellets were frozen in acetone-dry ice and analyzed by SDS-PAGE. KdtA was detected and quantified by Western blotting with anti-FLAG antibodies. All the data presented here represent at least three independent experiments.
Protein purification. (i) FtsH purification. The sequence coding for the 549 C-terminal amino acid of FtsH was cloned downstream to a His-tagged maltose-binding protein (MBP) coding sequence on the inducible pMAL-C expression vector (NEB). Culture (800 ml) was grown to an OD600 of 0.8 when IPTG (isopropyl-β-D-thiogalactopyranoside) was added to a final concentration of 0.5 mM. After 3 h, the cells were centrifuged and the pellet was resuspended in 30 ml buffer A (100 mM NaPO4 [pH 7.5], 300 mM NaCl) and subjected to a French press. The lysate was centrifuged at 20,000 x g for 30 min to precipitate membrane debris. The clear supernatant was supplemented with imidazole to a final concentration of 20 mM and loaded on a gravity flow column containing 3 ml Ni-NTA agarose (Qiagen). The column was washed with 50 ml of buffer A supplemented with 50 mM imidazole and eluted with 5 ml of buffer A supplemented with 250 mM imidazole.
The eluted fraction was loaded onto a gravity flow column containing 5 ml of amylose resin (NEB), washed with 30 ml of buffer A, and eluted with 5 ml of buffer A supplemented with 10 mM maltose. The purified faction was further concentrated using Amicon Ultra (Millipore).
(ii) KdtA purification. The KdtA coding sequence was cloned into the His tag containing the pET-22b expression vector (Novagen) using NdeI and XhoI to remove the pelB leader sequence. Cultures were grown, induced, and harvested as above, and the pellet was resuspended in 30 ml of KdtA buffer (20 mM HEPES [pH 7.6], 5 mM β-mercaptoethanol, 0.2% Igepal) and centrifuged as described before. The supernatant was loaded onto a 16/10 SP FF cation exchange column (Amersham Biosciences) equilibrated with the same buffer and eluted with a 200-ml gradient of 0 to 1 M NaCl in the same buffer. Fractions containing KdtA (detected using SDS-PAGE chromatography) were collected, and imidazole was added to a final concentration of 3 mM. The sample was loaded on a gravity flow column containing 3 ml Ni-NTA agarose, washed with 30 ml of KdtA buffer supplemented with 0.5 M NaCl and 20 mM imidazole, and eluted with the same buffer containing 100 mM imidazole. The purified enzyme was further concentrated as described for FtsH.
In vitro degradation assay. The degradation assay was performed as described by Makinoa et al. (22), with minor modifications. The reaction was carried out in a final volume of 65 µl containing 50 mM Tris-acetate (pH 8.0), 5 mM magnesium acetate, 12.5 µM zinc acetate, 20 mM KCl, 100 mM NaCl, 2 mM β-mercaptoethanol, 15 µg MBP-FtsH, 3 µg His-KdtA. ATP (4 mM) or ADP (4 mM) was added as indicated. The reaction was carried out at 37°C, and samples (15 µl) were removed at the indicated times, mixed with sample buffer, and frozen.
Samples were subjected to SDS-PAGE on 10% polyacrylamide gels and stained with Coomassie brilliant blue.
|
|
|---|
KdtA is coded for by the gene kdtA (waaA), an essential gene which is located in an operon upstream of the essential kdtB (coaD) gene. To prevent a lethal polar effect, we introduced an additional promoter downstream of the FLAG tag and upstream of the kdtB reading frame (Fig. 1, top). We chose the small fabZ promoter, which is regulated similarly to the kdt operon, as it participates in phospholipid biosynthesis. The E. coli strain containing the chromosomal FLAG-tagged KdtA grew as well as the wild-type bacteria, indicating that the function of these two essential genes (kdtA and kdtB) was not disturbed by the manipulations.
![]() View larger version (13K): [in a new window] |
FIG. 1. Determination of KdtA stability. A chromosomal FLAG tag for the kdtA gene was introduced to an E. coli MG1655 strain as described by Uzzau et al. (38). The small fabZ promoter was added on the primers upstream of the kdtB coding sequence homology (top). Cultures of MG1655 kdtA::FLAG were grown to an OD600 of 0.4 at 37°C. Rifampin and spectinomycin were added to block transcription and translation, respectively, and samples were taken at intervals and subjected to Western blot analysis as described in Materials and Methods. The results represent an average of three independent experiments. A t1/2 of <10 min was calculated in each individual experiment.
|
As we used a FLAG-tagged substrate, it is possible that the addition of the FLAG tag changes the specificity toward FtsH. This possibility appears unlikely in view of additional experiments indicating a similar degradation of His-tagged KdtA, both in vivo and in vitro.
KdtA degradation in mutants lacking ATP-dependent cytosolic proteases. Assuming that KdtA is proteolytically degraded, we examined the possible involvement of the four known cellular ATP-dependent proteases (10, 25). The FLAG-tagged kdtA allele was introduced into different mutant strains, and its stability was determined. The mutants used were lon, clpP, and the triple mutants lon, clpP, and hslVU, which lack the activities of Lon, ClpAP, ClpXP, and HslVU. KdtA degradation took place in all of the mutant strains examined, including the triple mutant lacking all four proteases (Fig. 2, left), demonstrating that proteolysis is independent of these proteases. It can be noted that proteolysis is even faster in the lon mutant. This result could imply that the active protease is upregulated in the absence of other proteases.
![]() View larger version (16K): [in a new window] |
FIG. 2. Degradation of KdtA in several proteolysis-deficient mutants and in the presence of arsenate. Degradation assay of KdtA was performed in all the strains as described for Fig. 1. Left, degradation in proteolysis-deficient mutants; the FLAG-tagged kdtA allele was introduced into a lon mutant, a clpP mutant, and a triple mutant comprised of lon, clpP, and hslVU. Right, effect of 20 mM sodium arsenate.
|
KdtA is a substrate of FtsH (HflB). KdtA is degraded by an ATP-dependent protease, but not by any of the four cytosolic proteases Lon, ClpAP, ClpXP, and HslVU. An additional ATP-dependent protease that could play a role in KdtA degradation is the membrane-associated FtsH protease. However, in contrast to the cytosolic ATP-dependent proteases, FtsH is an essential gene and, therefore, it was not possible to use deletion mutants. Although there is an available deletion mutant with a suppressor in the fabZ gene (30), we used a temperature-sensitive mutant that loses FtsH activity above 42°C. A strain carrying a temperature-sensitive allele (ftsH1) of the ftsH gene (kindly provided by Christophe Herman and Philippe Bouloc) was used as a recipient for transduction of the gene coding for the FLAG-tagged KdtA. Cultures were grown exponentially at 30°C until turbidity reached an OD600 of 0.4 before they were transferred to 44°C. Rifampin and spectinomycin were added after 15 min at 44°C, and samples were removed as described earlier. At 37°C, KdtA was degraded at approximately the same rate in the ftsh1 background as in the wild-type strain. At 44°C, when FtsH activity is lost, KdtA degradation was dramatically stabilized (Fig. 3). Furthermore, such stabilization is highly remarkable, since in the wild type the stability of KdtA decreases with an increase in temperature (see comparison of stability at 37°C and at 44°C [Fig. 3]). This result is in agreement with other findings, indicating that most proteases are more active at higher temperatures; moreover, for FtsH substrates it has been shown that they undergo partial unfolding at the higher temperatures, facilitating faster degradation (12).
![]() View larger version (25K): [in a new window] |
FIG. 3. Degradation of KdtA in a temperature-sensitive ftsH mutant (ftsH1). The FLAG-tagged kdtA allele was introduced into an ftsH temperature-sensitive strain (ftsH1). Cultures were grown at 37°C to an OD600 of 0.4 and divided into two, and one part was transferred to 44°C conditions. After 15 min, the degradation assay of KdtA was performed as described for Fig. 1.
|
In order to carry out an in vitro reaction, we fused the 549 C-terminal amino acids of FtsH, which include the active part and the first transmembrane domain, required for oligomerization, to MBP (22). Purified FtsH and KdtA were incubated as described in Material and Methods, and samples were removed at the times indicated. The results, presented in Fig. 4, indicate that the purified FtsH-MBP degraded purified KdtA in an ATP-dependent manner. Thus, no degradation was obtained if ATP was replaced by ADP (Fig. 4, right). These data indicate that KdtA is a specific substrate of FtsH.
![]() View larger version (12K): [in a new window] |
FIG. 4. In vitro proteolysis of KdtA by FtsH. In vitro degradation assay was performed as described in Materials and Methods with ATP (left) or ADP (right). Samples were collected at 60-min intervals and subjected to SDS-PAGE analysis and Coomassie blue staining. The reactions were carried out at 37°C.
|
|
|
|---|
The essential structure of LPS is composed of a lipid moiety (lipid A) and a sugar moiety (KDO). LpxC catalyzes the second step in lipid A biosynthesis, hydrolyzing UDP-3-O-(3-hydroxymyristoyl)-N-acetylglucosamine to acetate and UDP-3-O-(3-hydroxymyristoyl) glucosamine, which is the first committed step in lipid A biosynthesis. Therefore, by controlled proteolysis of LpxC, FtsH regulates the levels of lipid A. KdtA catalyzes the transfer of two KDO residues from the cytosolic donor molecule, CMP-KDO, to the acceptor membrane precursor lipid IVA. After the transfer of KDO is complete, the KDO2-lipid IVA can further mature to the final, physiologically essential structure, KDO2-lipid A. By controlled proteolysis of KdtA, FtsH also regulates the addition of the sugar moiety of the LPS and thus the maturation of the LPS precursor. This finding, that FtsH is also involved in controlling the transfer of the KDO molecules to the lipid A precursor, is compatible with the idea that FtsH-mediated proteolysis is essential for balancing the levels of the two components of the essential structure of LPS (Fig. 5).
![]() View larger version (18K): [in a new window] |
FIG. 5. Schematic representation of the involvement of FtsH in the LPS biosynthetic pathway. Phospholipids represent the major groups of phospholipids found in E. coli, including cardiolipin and phosphatidylethanolamine. T bars represent degradation by FtsH of LpxC and KdtA.
|
Several recognition domains have been suggested for FtsH substrates. Thus, in the case of
32, the highly conserved region 2.1 appears to be essential for in vivo degradation (5, 16, 28, 29). However, this region is not sufficient for degradation. The other FtsH substrate—LpxC—is probably recognized by a hydrophobic region at the C terminus (8, 9). It has been suggested that a C-terminal sequence of UUXXXXXUUUU (U represents a hydrophobic amino acid and X represents any amino acid) is the degradation signal (F. Narberhaus, unpublished data). It is yet not known which domain of KdtA constitutes the FtsH recognition signal. The protein contains two hydrophobic stretches that are compatible with the suggested consensus recognition sequence. These sequences are PLEAAAHAIPVLM (UUXUUUXUUUUUU, starting at amino acid 336) and LLQLLEPYLPP (UUXUUXUXUUU, starting at amino acid 412). Support for the involvement of hydrophobic recognition between FtsH and KdtA was obtained from experiments indicating that proteolysis was not affected by high ionic strength but was inhibited by low concentrations of mild, nonionic, nondenaturing detergents, such as NP-40. However, it is possible that the inhibition by NP-40 results from disruption of the oligomeric state of FtsH. It has also been shown that FtsH degradation requires at least partial unfolding of the substrate (12), usually resulting from low intrinsic thermodynamic stability. KdtA appears to belong to this group of proteins, as purified KdtA tends to aggregate in a temperature- and concentration-dependent manner (C. Katz, unpublished data). At any rate, the identification and characterization of an additional FtsH substrate will advance our understanding of the specificity of its proteolytic activity.
The specific substrates of the membrane-bound protease FtsH include regulatory proteins, the transcriptional activator
32, and phage repressors. In addition, FtsH is essential for regulating the level of one essential protein involved in LPS synthesis, LpxC. The results presented here point out the involvement of FtsH in the proteolysis of an additional essential protein which also participates in the same pathway, KdtA. This proteolysis-based dual regulation may be essential for balancing the synthesis of the lipid component (lipid A) and the sugar component (KDO) of the LPS essential structure (Fig. 5). This dual regulation ensures the balanced synthesis of the two components of LPS, a compound crucial for growth and pathogenesis of gram-negative bacteria.
We thank Christophe Herman and Philippe Bouloc for providing ftsH mutants and Takashi Yura for cytosolic protease mutants. We thank Dvora Biran and Uri Gophna for excellent ideas and fruitful discussions.
Published ahead of print on 5 September 2008. ![]()
|
|
|---|
O protein in Escherichia coli. J. Bacteriol. 175:7720-7723.
cIII. J. Bacteriol. 179:358-363.
32 is required for modulating both metabolic stability and transcriptional activity. J. Bacteriol. 186:7474-7480.
32 heat shock transcription factor at high temperature. Implications for heat shock regulation. J. Biol. Chem. 274:22002-22007.
32) is necessary but not sufficient for degradation by the FtsH protease. Microbiology 153:2560-2571.
32 by a bacterial one-hybrid approach. J. Bacteriol. 187:3807-3813.This article has been cited by other articles:
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Copyright © 2009 by the American Society for Microbiology. For an alternate route to Journals.ASM.org, visit: http://intl-journals.asm.org | More Info»