Previous Article | Next Article ![]()
Journal of Bacteriology, May 2009, p. 3328-3338, Vol. 191, No. 10
0021-9193/09/$08.00+0 doi:10.1128/JB.01628-08
Copyright © 2009, American Society for Microbiology. All Rights Reserved.

Svetlana A. Kocherginskaya,2,
M. Ashley Spies,3,4
Kyle E. Beery,5
Charles A. Abbas,2,4,5
Roderick I. Mackie,2,4* and
Isaac K. O. Cann1,2,4*
Department of Microbiology,1 Department of Animal Sciences,2 Department of Biochemistry,3 the Institute for Genomic Biology, University of Illinois, Urbana, Illinois 61801,4 James R. Randall Research Center, Archer Daniels Midland Company, Decatur, Illinois 625215
Received 15 November 2008/ Accepted 11 March 2009
|
|
|---|
-L-arabinofuranoside, and xylo-oligosaccharides; thus, the gene was designated xyl3A. When incubated in combination with Xyn10D-Fae1A, Xyl3A improved the release of xylose monomers from a hemicellulosic xylan substrate, suggesting that these two enzymes function synergistically to depolymerize xylan. Directed mutagenesis studies of Xyn10D-Fae1A mapped the catalytic sites for the two enzymatic functionalities to distinct regions within the polypeptide sequence. When a mutation was introduced into the putative catalytic site for the xylanase domain (E280S), the ferulic acid esterase activity increased threefold, which suggests that the two catalytic domains for Xyn10D-Fae1A are functionally coupled. Directed mutagenesis of conserved residues for Xyl3A resulted in attenuation of activity, which supports the assignment of Xyl3A as a GH family 3 β-D-xylosidase. |
|
|---|
Prevotella ruminicola 23 is an important member of the anaerobic rumen microbiota (60) that contributes to the utilization of noncellulosic polysaccharides, such as starch and xylan (15, 25, 35, 55). Despite its documented importance in rumen physiology, relatively little is known about the cellular machinery that P. ruminicola 23 employs to harvest energy from hemicellulosic substrates. Several studies have explored the carbohydrate active enzymes from the related taxon Prevotella bryantii B14 (previously classified as P. ruminicola B14) (25, 27, 28, 50, 52, 66, 73); however, less is known about the xylanolytic system that P. ruminicola 23 elaborates. These two species share 88.9% nucleotide identity in their 16S rRNA genes (1,473 nucleotides aligned); however, there is evidence that these two species exhibit differences in their xylanolytic systems (2). Two xylanases from P. ruminicola 23 have been characterized: a 66-kDa xylanase with significant sequence identity to glycoside hydrolase (GH) family 5 endoglucanases (69, 70) and an 80-kDa xylanase related to GH family 10 endoxylanases which possesses a 260-amino-acid insertion within the putative catalytic domain (25). Recently, the draft genome sequence for P. ruminicola 23 has been obtained (http://www.tigr.org/tdb/rumenomics/), and a large number of GHs have been identified. Consistent with the predicted role of P. ruminicola 23 in hemicellulose degradation, many of these genes appear to encode enzymes important for hemicellulose depolymerization and utilization.
In this study, we report the biochemical properties for two GHs with unique domain architectures from P. ruminicola 23. These two enzymes function synergistically to release monomeric sugars from a complex hemicellulosic substrate, xylan. This study, therefore, provides important insight into the molecular strategies for xylan depolymerization by P. ruminicola 23.
|
|
|---|
Sequencing, cloning, expression, and purification of xyn10D-fae1A and xyl3A. The genome of P. ruminicola 23 was sequenced by the North American Consortium for Fibrolytic Rumen Bacteria in collaboration with The Institute for Genomic Research. Autoannotation of the P. ruminicola genome identified ORF02827 (xyn10D-fae1A) as a gene encoding a bifunctional xylanase-ferulic acid esterase and ORF02829 (xyl3A) as a gene encoding a putative β-glucosidase.
P. ruminicola 23 was maintained and grown in a standard anaerobically prepared medium as described previously (32). DNA was isolated from mid-log-phase cultures and was purified with an UltraClean DNA isolation kit. The DNA sequences corresponding to the entire ORFs of xyn10D-fae1A and xyl3A were amplified from P. ruminicola 23 genomic DNA by PCR using the primers ORF02827-F (5'-CATATGAAGAAACTATTAGTAGCGTTATCG-3') and ORF02827-R (5'-CTCGAGTTACTTAAAGAGACTCTGAGCCATCTTTTC-3') for xyn10D-fae1A and ORF02829-F (5'-CATATGAAATATCAACTATTCTTATCATTGGC-3') and ORF02829-R (5'-CTCGAGCTATAAAGTGATGGTCAGTTTTTTCAGATC-3') for xyl3A. The primer sets were engineered to incorporate 5' NdeI and 3' XhoI restriction sites for subsequent directional cloning. The resulting amplicons were then cloned into the pGEM-T vector via TA cloning and subcloned in frame with the hexahistidine-encoding sequence of a modified pET-28a expression vector by replacing the NdeI-XhoI polylinker. Thus, recombinant expression of the gene products results in N-terminal polyhistidine fusion proteins. The pET-28a vector was modified to replace the gene for kanamycin resistance with that for ampicillin resistance (9). The integrity of the cloned xyn10D-fae1A and xyl3A genes was confirmed by DNA sequencing (W. M. Keck Center for Comparative and Functional Genomics at the University of Illinois at Urbana-Champaign).
The resulting plasmid constructs, pET28-xyn10D-fae1A and pET28-xyl3A, were introduced into E. coli BL-21 CodonPlus (DE3) RIL competent cells by heat shock and grown overnight in lysogeny broth (4, 5) (LB) (10 ml) supplemented with ampicillin (100 µg/ml) and chloramphenicol (50 µg/ml) at 37°C and with aeration. After 12 h, the starter cultures were diluted into fresh LB (1 liter) supplemented with ampicillin and chloramphenicol and cultured at 37°C with aeration until the absorbance at 600 nm reached 0.3. The culture was then incubated at 16°C with aeration, and protein expression was induced by the addition of isopropyl β-D-thiogalactopyranoside (IPTG) at a final concentration of 0.1 mM. After 16 h, the cells were harvested by centrifugation (4,000 x g, 15 min, 4°C), resuspended in 35 ml lysis buffer (50 mM sodium phosphate, 300 mM NaCl [pH 7.0]), and ruptured by two passages through a French pressure cell (American Instrument Company Inc., Silver Spring, MD). The cell lysate was then clarified by centrifugation at 30,000 x g for 30 min at 4°C and purified utilizing Talon polyhistidine tag purification resin from Clontech (Mountain View, CA) as described by the manufacturer. Aliquots of eluted fractions were analyzed by sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) using the method described by Laemmli (43), and protein bands were visualized by staining with Coomassie brilliant blue G-250. Elution fractions were pooled and dialyzed against storage buffer (50 mM Tris-HCl, 200 mM NaCl, 1 mM dithiothreitol [pH 7.0]), and assays were performed immediately.
The protein concentrations were determined by a kit from Bio-Rad (Hercules, CA) based on the Bradford method (7) with bovine serum albumin as the standard.
Size exclusion chromatography. Size exclusion chromatography was carried out with an AKTA Purifier 900 fast protein liquid chromatography system equipped with a Superdex 200 10/300 GL size exclusion column and a UV detector, all obtained from GE Healthcare (Piscataway, NJ). Xyn10D-Fae1A (1 mg/ml; 100 µl), Xyl3A (1 mg/ml; 100 µl), or a gel filtration standard mixture was injected onto the column, which had been pre-equilibrated with a Tris buffer (50 mM Tris·HCl, 150 mM NaCl; pH 8.0) liquid phase at a flow rate of 0.5 ml/min. Standard curves were generated by plotting the logarithm of the molecular weights of the gel filtration standards versus retention times. Experimental retention times for three independent experiments were used to calculate the apparent molecular weights of Xyl3A and Xyn10D-Fae1A from the standard curve.
Evaluation of xylanase and esterase activities on agar plates. Enzyme-catalyzed hydrolysis of plant cell wall polysaccharides was evaluated by spotting purified Xyn10D-Fae1A (5 µg) onto agar plates (0.8%) containing oat spelt xylan (OSX) (0.1%), carboxymethyl cellulose (0.1%), or locust bean gum (0.1%). The plates were then incubated at 37°C for 16 h and were stained by incubation with Congo red (0.1%) for 5 min followed by destaining with NaCl (1 M) (63). Esterase activity was assessed by adapting the method described by Lanz and Williams to an agar plate (45). Briefly, purified Xyn10D-Fae1A (14 µg, 28 µg, or 56 µg) was spotted onto an agar plate (0.8%) containing 1-napthyl butyrate (5 mM) and Tween 80 (2%). The plate was then incubated at 37°C for 16 h, stained with fast garnet GBC sulfate (5 mg/ml in 10% SDS) for 10 min, and then washed with Tween 80 (2%).
Hydrolysis of xylo-oligosaccharides and OSX. The capacity of P. ruminicola Xyn10D-Fae1A and Xyl3A to hydrolyze xylo-oligosaccharides was assessed by resolving and detecting the hydrolysis products utilizing thin-layer chromatography (TLC). Initial biochemical studies had revealed that the optimum pHs for activity for Xyn10D-Fae1A and Xyl3D were 5.0 and 6.0, respectively (data not shown). Thus, for measuring the hydrolysis of xylo-oligosaccharides, reaction mixtures (10 µl) were prepared in phosphate buffer (50 mM sodium phosphate, 100 mM NaCl; pH 6.0 [Xyn10D-Fae1A] or pH 5.0 [Xyl3A]) with X2 to X6 (100 to 150 µg), and reactions were initiated by the addition of Xyn10D-Fae1A (10 µM, final concentration) or Xyl3A (12 µM, final concentration). Following incubation at 37°C for 7.5 h, 2 volumes of ethanol was added, and the fluid was evaporated using a SC110A Speed Vac concentrator (Savant, Ramsey, MN). The dry matter was then dissolved in 2.5 µl of H2O and spotted onto a DC-Plastikfolien silica gel 60 F254 TLC plate from Merck (Whitehouse Station, NJ) to resolve the products (40).
To identify the products of hydrolysis of OSX following incubation with Xyn10D-Fae1A or Xyl3A, TLC was utilized. Reaction mixtures (250 µl) were prepared in phosphate buffer (50 mM sodium phosphate, 100 mM NaCl; pH 6.0 [Xyn10D-Fae1A], pH 5.0 [Xyl3A], or pH 5.5 [Xyn10D-Fae1A plus Xyl3A]) with OSX (1%), and reactions were initiated by the addition of Xyn10D-Fae1A (0.50 µM), Xyl3A (0.50 µM), or both enzymes (0.50 µM each). Following incubation at 37°C for 14 h, the reaction mixtures were centrifuged, and then 2.5 µl or 5.0 µl was spotted onto TLC plates.
Monomeric xylose (X1) and xylo-oligosaccharides (X2 to X6) (25 µg each) were used as standards, and the TLC plates were developed in an acetone-ethyl acetate-acetic acid (2:1:1, vol/vol/vol) mobile phase. The products were then visualized by spraying the plates with a 1:1 (vol/vol) mixture of methanolic orcinol (0.2% wt/vol) and sulfuric acid (20% vol/vol), and then the plates were heated at 100°C for 5 min (33, 53).
To quantify the amount of reducing equivalents that were released following incubation of Xyn10D-Fae1A, Xyl3A, or both with OSX, a para-hydroxybenzoic acid hydrazide (PAHBAH) assay was performed as described previously by Lever (47).
Hydrolysis of pNP-linked sugars. Enzyme-catalyzed hydrolysis of para-nitrophenyl (pNP)-linked monosaccharide substrates was assayed using a thermostated Cary 300 UV-visible-spectrum spectrophotometer from Varian Inc. (Palo Alto, CA). pNP substrates (10 mM) in acetate buffer (115 µl; 50 mM sodium acetate, 100 mM NaCl; pH 5.0) were incubated at 37°C in the presence or absence of Xyl3A (0.74 µM) for 10 min, and the level of pNP release was determined by continuously monitoring the absorbance at 400 nm. The extinction coefficient for pNPl at pH 5.0 and a wavelength of 400 nm was measured as 319 M–1 cm–1.
Analysis of methyl ferulate hydrolysis. To evaluate the capacity of Xyn10D-Fae1A and the Xyn10D-Fae1A site-directed mutants (see below) to hydrolyze the ester linkage of methyl ferulate, we utilized an HPLC-based detection system. Reaction mixtures (2 ml) were prepared with methyl ferulate (5 mM) in phosphate buffer (50 mM sodium phosphate, 100 mM NaCl; pH 6.0), and reactions were initiated by the addition of wild-type or mutant Xyn10D-Fae1A (1.2 µM). Following incubation at 37°C for 30 min, an equal volume of ethyl acetate was added to the mixture, vortexed, and then centrifuged at 6,000 x g for 10 min. The ethyl acetate layer was then transferred to a new tube and evaporated under N2 gas, and the extracted ferulic acid was dissolved in 1 ml of 50% methanol. The concentration of ferulic acid was then determined by HPLC as described by Wang et al. (67).
Site-directed mutagenesis.
Mutagenesis was performed using a QuikChange Multi site-directed mutagenesis kit from Stratagene (La Jolla, CA). First, mutagenic primers were engineered with the desired mutation in the center of the primer and
15 bases of correct sequence on either side (Table 1). Reaction mixtures were prepared as described in the QuikChange protocol with pGEMT-xyn10D-fae1A and pGEMT-xyl3A as the DNA templates for generation of the Xyn10D-Fae1A and Xyl3A mutants, respectively. After cycling of the reaction mixture 18 times in a PCR thermal cycler, the mixture was digested with DpnI, and the resulting DNA was transformed into chemically competent E. coli JM109 cells by heat shock. The mutant genes were then subcloned into the pET-28a vector and sequenced to ensure that the appropriate mutations were introduced, while the rest of the gene sequences remained unchanged. Expression and purification of the mutant recombinant proteins were performed as described above for wild-type Xyn10D-Fae1A and Xyl3A.
|
View this table: [in a new window] |
TABLE 1. Primer sequences used for mutagenesis
|
For mutants with very low activities, kcat(apparent) was determined at 10 mM pNPX and an enzyme concentration of 7.4 µM. Each kcat determination was performed in triplicate, and the rates of spontaneous pNPX hydrolysis (absence of enzyme) were subtracted from the rates of enzyme-catalyzed reactions.
Nucleotide sequence accession numbers. The gene sequences for xyn10D-fae1A and xyl3A have been deposited in the NCBI GenBank database with accession numbers FJ713437.1 and FJ713438.1, respectively.
|
|
|---|
84 kDa, this result suggested a protein existing as either a monomer or homodimer in solution (Fig. 2B). |
View larger version (11K): [in a new window] |
FIG. 1. Identification of a putative xylanase-esterase gene (xyn10D-fae1A) from the genome of P. ruminicola 23. The genome of P. ruminicola 23 was sequenced by the North American Consortium for Fibrolytic Rumen Bacteria in collaboration with The Institute for Genomic Research. ORF02827 was annotated as a putative bifunctional xylanase-esterase. Downstream of the xylanase-esterase are genes predicted to encode a hypothetical protein, a β-D-glucosidase, an ABC transporter, and a hybrid two-component system regulator.
|
![]() View larger version (53K): [in a new window] |
FIG. 2. xyn10D-fae1A encodes a bifunctional xylanase-esterase. (A) Purification of recombinant Xyn10D-Fae1A. The eluate from cobalt chelate chromatography was analyzed by 12% SDS-PAGE, followed by Coomassie brilliant blue G-250 staining. MW, molecular weight (in thousands). (B) Gel filtration chromatography. The size of purified Xyn10D-Fae1A was estimated by size exclusion chromatography. The molecular weight of Xyn10D-Fae1A was calculated from the retention time of the peak absorbance by comparison with calibration standards having known molecular weights. Molecular weight is reported as the mean ± standard deviation from three independent experiments. mAU, milli-absorbance units. (C) Depolymerization of OSX. Xyn10D-Fae1A was assessed for its capacity to depolymerize OSX by incubating the protein on an agar plate infused with OSX followed by staining with Congo red. (D) Hydrolysis of 1-napthyl butyrate. Xyn10D-Fae1A was assessed for its capacity to hydrolyze 1-naphtyl butyrate by incubating the protein on an agar plate infused with 1-NB followed by development with fast garnet GBC sulfate. (E) Hydrolysis of xylo-oligosaccharides. Xyn10D-Fae1A-catalyzed hydrolysis of xylo-oligosaccharides (X2 to X6) was assessed by incubating the enzyme with each substrate and then resolving the products by TLC followed by staining with methanolic orcinol.
|
Endo-β-1,4-xylanases hydrolyze the β-1,4 linkage between xylose units within the backbone of xylan polymers. To evaluate the size of xylose products that Xyn10D-Fae1A releases from xylo-oligosaccharides of different degrees of polymerization, we incubated Xyn10D-Fae1A with xylo-oligosaccharides (X2 to X6) and resolved the products by TLC. In the presence of Xyn10D-Fae1A, xylobiose hydrolysis to xylose was not detected (Fig. 2E); however, all xylo-oligosaccharides with higher degrees of polymerization (X3 to X6) were hydrolyzed mostly to xylobiose, with some xylose also being released (Fig. 2E). These results suggest that Xyn10D-Fae1A is a functional endo-β-1,4-xylanase. Furthermore, these data indicate that the smallest xylo-oligosaccharide that Xyn10D-Fae1A can effectively hydrolyze is xylotriose.
Identification, cloning, and expression of P. ruminicola 23 ORF02829.
Xyn10D-Fae1A encodes a functional xylanase-esterase (Fig. 2C and 2D); however, the major product released from xylo-oligosaccharides appears to be xylobiose (Fig. 2E). In order for P. ruminicola 23 to utilize xylose from longer-chain xylo-oligosaccharides or xylan, the bacterium requires an enzyme that releases xylose or monomeric sugars from the products of Xyn10D-Fae1A. We therefore cloned and expressed the two genes downstream of the Xyn10D-Fae1A-encoding gene. While no catalytic activity has been detected yet for ORF02828 (hypothetical protein), the product of ORF02829, expressed as an N-terminal hexahistidine fusion protein, exhibited robust catalytic activity as described below. The gene product was purified by metal affinity chromatography, and the predicted molecular mass of the hexahistidine fusion protein (98 kDa) was in agreement with the size of the purified protein estimated by comparison with molecular weight markers resolved by SDS-PAGE (Fig. 3A). To evaluate the quaternary structure for this fusion protein, the apparent molecular mass was determined by size exclusion chromatography. As shown in Fig. 3B, the elution volume of the putative β-glucosidase was 8.22 ml, which was just after the exclusion volume of the column (
7.8 ml), indicating that this protein exists as a large polymeric species in solution. This peak had a shorter retention time than that for the highest-molecular-weight standard tested (Fig. 3B, inset). Therefore, the apparent molecular mass for the protein was estimated by extrapolation of the standard curve. Based on our calculation, the apparent molecular mass for this protein is 868 ± 2.2 kDa, which is close to the value expected for a nonamer (886 kDa).
![]() View larger version (47K): [in a new window] |
FIG. 3. xyl3A encodes a functional β-xylosidase. (A) Purification of recombinant Xyl3A. The eluate from cobalt chelate chromatography was analyzed by 12% SDS-PAGE, followed by Coomassie brilliant blue G-250 staining. MW, molecular weight (in thousands). (B) Gel filtration chromatography. The size of purified Xyl3A was estimated by size exclusion chromatography. The molecular weight (MW, in thousands; reported as the mean ± standard deviation from three independent experiments) of Xyl3A was calculated from the retention time of the peak absorbance by comparison with calibration standards having known molecular weights. mAU, milli-absorbance units. (C) Hydrolysis of pNP-linked sugars. Xyl3A was assessed for its capacity to hydrolyze several pNP-linked sugars by UV spectroscopy. Values are means ± standard deviations from three independent experiments. (D) Hydrolysis of xylo-oligosaccharides. Xyl3A-catalyzed hydrolysis of xylo-oligosaccharides (X2 to X6) was assessed by incubating the enzyme with each substrate and then resolving the products by TLC followed by staining with methanolic orcinol.
|
-L-arabinofuranosidase.
The gene sequence for ORF02829 is predicted to encode a family 3 GH and was annotated as a β-D-glucosidase. To determine the substrate specificity for the gene product of ORF02829, the recombinant protein was screened for activity with a library of
- and β-para-nitrophenol-linked monosaccharides. The putative β-D-glucosidase was incubated in the presence of the derivatized sugars, and the reactions were monitored spectrophotometrically. These experiments revealed that upon incubation with pNP-β-D-glucopyranoside, release of pNP was not detectable (Fig. 3C). In contrast, hydrolysis of pNPX was readily observed in the presence of the protein (Fig. 3C). In addition, low activity was observed with pNP-
-L-arabinofuranoside; however, this activity represented a fraction of the pNPX activity (Fig. 3C). These results indicated that ORF02829 encodes a functional GH that exhibits primarily β-xylosidase activity, although it also possesses the capacity to hydrolyze pNP-
-L-arabinofuranoside with lower activity. Based on these results, which indicated that ORF02829 encodes the first GH family 3 xylosidase to be characterized from P. ruminicola 23, the gene was designated xyl3A. To evaluate whether Xyl3A possesses the capacity to hydrolyze β-1,4-linked xylo-oligosaccharides of various lengths, Xyl3A (0.42 µM) was incubated with the substrates (X2 to X6), and the products were resolved by TLC followed by staining with methanolic orcinol. Upon incubation of the enzyme with each of the β-1,4-linked xylo-oligosaccharides, the sole products released were xylose monomers (Fig. 3D). These experiments revealed that Xyl3A is capable of hydrolyzing the glycosidic linkages of β-1,4-xylo-oligosaccharides with various lengths.
Taken together, these results suggest that xyl3A does not encode an enzyme with β-D-glucosidase activity as previously annotated; rather, this gene encodes a bifunctional β-D-xylosidase/
-L-arabinofuranosidase that can hydrolyze the glycosidic linkage of β-1,4-xylo-oligosaccharides.
Xyn10D-Fae1A and Xyl3A function synergistically to release xylose from xylan. To evaluate whether the enzymatic properties of Xyn10D-Fae1A and Xyl3A may function coordinately in the depolymerization of xylan, the two enzymes were incubated independently or in combination with OSX and the products of hydrolysis were resolved by TLC. In the absence of either enzyme, no depolymerization of the xylan substrate was detected (Fig. 4A). When OSX was incubated with Xyn10D-Fae1A, depolymerization of the xylan substrate was detected (Fig. 4A). By comparison with xylo-oligosaccharide standards, the major hydrolysis products are predicted to be xylobiose and several other undefined products. When OSX was incubated with Xyl3A, a relatively small amount of depolymerization was observed (Fig. 4B), and the only detectable product was predicted to be xylose (Fig. 4A). Incubation of OSX with both Xyn10D-Fae1A and Xyl3A resulted in a xylan depolymerization pattern similar to that observed for Xyn10D-Fae1A alone (Fig. 4A); however, conversion of the hydrolytic products to the monosaccharide, xylose, was increased (Fig. 4B).
![]() View larger version (33K): [in a new window] |
FIG. 4. Xyn10D-Fae1A and Xyl3A function synergistically to release xylose from xylan. (A) TLC separation of products released from OSX by Xyn10D-Fae1A. Xyn10D-Fae1A (0.50 µM) or Xyl3A (0.50 µM) was incubated with OSX (1%), and the products were resolved by TLC followed by staining with methanolic orcinol. Xylo-oligosaccharide standards X1 to X4 were spotted onto the plate to serve as markers (lane 1) for the identification of hydrolysis products. The indicated enzymes were incubated with OSX at 37°C for 14 h, and 2.5 µl (lanes 2, 4, 6, and 8) or 5.0 µl (lanes 3, 5, 7, and 9) of the reaction mixtures was spotted onto the TLC plate. (B) Reducing sugars released from OSX by Xyn10D-Fae1A and Xyl3A. Wild-type or mutant (E280S or S629A) Xyn10D-Fae1A was incubated with OSX (1%), and the reducing sugars were detected by using the PAHBAH assay. The reducing sugar concentrations were calculated from the absorbance at 410 nm with comparison to a standard curve generated with known concentrations of glucose. Two-tailed P values were determined by performing an unpaired Student's t test.
|
Mutational analyses of Xyn10D-Fae1A maps the two catalytic domains to discrete regions of the polypeptide sequence. To test our prediction that Xyn10D-Fae1A possesses two distinct catalytic modules, amino acid substitutions were introduced in the putative catalytic residues for these two domains. Based upon alignment with the catalytic nucleophile (Glu298) identified for the extracellular xylanase from Bacillus stearothermophilus (29, 64), we predicted that Glu280 may be the catalytic nucleophile for the xylanase domain of Xyn10D-Fae1A (Fig. 5A). Amino acid alignments also revealed that a catalytic triad (Ser-His-Glu) that is crucial for catalysis in ferulic acid esterase enzymes (6, 58) is present and that S629 may be the catalytic nucleophile for the esterase domain of Xyn10D-Fae1A (Fig. 5A).
![]() View larger version (21K): [in a new window] |
FIG. 5. Mutational analyses of Xyn10D-Fae1A map the two catalytic domains to discrete regions of the polypeptide sequence. (A) Domain architecture for Xyn10D-Fae1A. Functional domains were assigned utilizing the Pfam online server (24). Amino acid substitutions were independently introduced into the putative catalytic residue for the xylanase domain (Glu280) and the ferulic acid esterase domain (Ser629) by site-directed mutagenesis. (B) Depolymerization of OSX by wild-type and mutant (E280S or S629A) Xyn10D-Fae1A. Wild-type or mutant (E280S or S629A) Xyn10D-Fae1A was incubated with OSX (1%), and the products were resolved by TLC followed by staining with methanolic orcinol. Xylo-oligosaccharide standards X1 to X4 were spotted on the plate in lane 1 to serve as markers for the identification of hydrolysis products. The wild-type enzyme, E280S mutant, or S629A mutant (0.93 µM in lanes 3, 5, and 7, respectively, and 1.9 µM in lanes 4, 6, and 8, respectively) was incubated with OSX at 37°C for 21 h, and 2.5 µl of the reaction mixtures was spotted onto the TLC plate. (C) Reducing sugars released from OSX by wild-type and mutant (E280S or S629A) Xyn10D-Fae1A. Wild-type or mutant (E280S or S629A) Xyn10D-Fae1A was incubated with OSX (1%), and the reducing sugars were detected by using the PAHBAH assay. The reducing sugar concentrations were calculated from the absorbance at 410 nm with comparison to a standard curve generated with known concentrations of glucose. (D) Hydrolysis of methyl ferulate by wild-type and mutant (E280S or S629A) Xyn10D-Fae1A. Methyl ferulate (5 mM) was incubated with wild-type, E280S, or S629A Xyn10D-Fae1A (1.2 µM, final concentration). Following incubation at 37°C for 30 min, ferulic acid was determined by HPLC as described by Wang et al. (67). For panels C and D, values are means plus standard deviations from three independent experiments. Two-tailed P values were determined by performing an unpaired Student's t test.
|
To evaluate whether these independent mutations influenced the catalytic activity of the adjacent domains, the Glu280Ser mutant was monitored for ferulic acid esterase activity and the Ser629Ala mutant was characterized for xylanase activity. When incubated with OSX, the Ser629Ala mutant depolymerized xylan to an extent similar to the that of wild-type Xyn10D-Fae1A, although a statistically significant decrease was detected for the mutant protein (Fig. 5B and C). However, when the Glu280Ser mutant was evaluated for ferulic acid esterase activity, the specific activity was increased threefold over that of wild-type Xyn10D-Fae1A (Fig. 5D).
Xyl3A is a GH family 3 β-xylosidase with a unique domain architecture. Comparison of the domain architectures of Xyl3A and other biochemically characterized members of the GH family 3 utilizing Pfam (http://www.sanger.ac.uk/Software/Pfam/) (24) suggested that Xyl3A possesses two domains, as with most members of this family. However, the analysis also predicted that Xyl3A, which belongs to cluster B, has a PA14 domain insertion in the C-terminal GH family 3 domain (Table 2). It is predicted that the PA14-like insertion sequence may represent a novel carbohydrate binding module (57).
|
View this table: [in a new window] |
TABLE 2. Activities and domain architecture for experimentally characterized family 3 GHs
|
Steady-state kinetic analysis of wild-type and mutant Xyl3A. To compare the catalytic properties for wild-type Xyl3A and six mutant forms (R149L, Y237F, D269A, D269N, E594Q, and E616A), we analyzed the steady-state kinetic values of these enzymes in the presence of pNPX. Wild-type or mutant Xyl3A was incubated in a sodium acetate buffer in the presence of various concentrations of pNPX, and the change in magnitude of the A400 signal was monitored by UV spectroscopy. Initial rate data for Xyl3A and the mutants were obtained for each of the substrate concentrations, and plots of the initial velocity of pNPX hydrolysis (nmol/s) versus substrate concentration (µM) were generated (data not shown). For mutants that exhibited very low rates, the kcat(apparent) was determined at 10 mM substrate. Steady-state kinetic values for wild-type and mutant Xyl3A were obtained by applying a nonlinear curve fit to the data (Table 3). These results suggested that the E594Q mutation has no significant effect on catalysis for Xyl3A. Conversely, the Y237F and E616A mutations have moderate effects on catalysis for Xyl3A, and the R149L, D269A, and D269N mutations have severe effects on catalysis for Xyl3A. The circular dichroism spectra for the wild type and Xyl3A mutants were collected and analyzed as described by Dodd et al. (18). Comparison of the circular dichroism spectra for the wild type and Xyl3A mutants revealed that they possess similar overall secondary structures (data not shown).
|
View this table: [in a new window] |
TABLE 3. Steady-state kinetic measurements for wild-type and mutant Xyl3A with pNPX
|
|
|
|---|
Two xylan-hydrolyzing enzymes have been previously characterized from P. ruminicola: a bifunctional GH family 5 xylanase/endoglucanase cloned from the type strain, P. ruminicola 23T (70), and a GH family 10 xylanase with an interrupted catalytic domain cloned from the related strain P. ruminicola D31d (71). The recently sequenced genome for P. ruminicola 23 harbors genes corresponding to these two previously characterized xylanases (data not shown) and also harbors two additional putative xylanase genes that were not previously characterized. One of these genes was annotated as a bifunctional xylanase-esterase (designated xyn10D-fae1A). To provide further insight into the molecular basis for xylan depolymerization by P. ruminicola 23, we cloned this gene and characterized the recombinant protein. Our results show that xyn10D-fae1A encodes a bifunctional GH family 10 xylanase-ferulic acid esterase. Furthermore, directed mutagenesis studies mapped the two catalytic functionalities to distinct regions on the polypeptide. A unique result that was obtained during the course of these experiments was that mutation of the putative nucleophile for the xylanase domain (E280S) led to an approximately threefold increase in ferulic acid esterase activity. While a clear explanation for these data will require further biophysical experiments, these results indicate that the xylanase and esterase domains may be functionally coupled.
The recently sequenced genomes for Bacteroides intestinalis DSM 17393 (GenBank accession no. EDV07678.1) and Bacteroides eggerthii DSM 20697 (GenBank accession no. ABVO01000038.1, nucleotides 298769 to 296631) harbor the only putative proteins in the GenBank database with significant sequence identity (64% for both) across the entire protein sequence for Xyn10D-Fae1A. Two genes from Clostridium thermocellum (xynY and xynZ) encode proteins with both GH family 10 xylanase (26, 31) and ferulic acid esterase (6) activities; however, in addition, the clostridial proteins have carbohydrate binding modules and dockerin domains. Despite the presence of these accessory domains in C. thermocellum XynY and XynZ, the natural occurrence of the GH 10 xylanase and CE 1 ferulic acid esterase domains within a single polypeptide sequence from different organisms suggests that this linkage may impart a selective advantage for xylan degradation over the two enzymatic functionalities in isolation. Another rumen bacterium, Ruminococcus flavefaciens 17, harbors a gene predicted to encode a protein with GH 11 xylanase and CE 1 esterase domains (1); however, the biochemical properties of this protein have not been characterized. Thus, it is not clear whether the CE 1 domain possesses ferulic acid esterase activity, as is the case for Xyn10D-Fae1A.
A number of different exoglycosidase functions have been identified for GH family 3 enzymes, including β-D-glucosidase, β-D-xylosidase,
-L-arabinofuranosidase, and N-acetyl-β-D-glucosaminidase (21). When we cloned the putative β-D-glucosidase gene (ORF02829) and characterized the recombinant protein, we found that it releases pNP from pNPX and pNP-
-L-arabinofuranoside but not pNP-β-D-glucopyranoside. The hydrolysis of both pNPX and pNP-
-L-arabinofuranoside (Xyl/Ara) has been reported for some members of GH family 3 (20, 46, 51, 74). With one exception (68), all of the characterized family 3 β-D-xylosidases possess substrate specificity for Xyl/Ara and do not possess β-D-glucosidase activity. The crystal structure of a family 3 β-D-glucosidase from barley (H. vulgare) revealed that Asp120 forms a hydrogen bond to the 6'OH group of the glucose substrate bound at the –1 subsite (36). Those authors found that Asp120 was highly conserved among biochemically defined family 3 β-D-glucosidases and also observed that the Xyl/Ara-active enzymes did not possess this conserved aspartate residue (36). The pentose sugars (β-D-xylopyranose and
-L-arabinofuranose) do not possess the additional CH2OH substituent from C-5 that is present in glucose; thus, it is possible that the larger glutamate residue could function to discriminate between hexoses and pentoses on the basis of steric interactions. It is more difficult to explain why the structurally distinct six-membered ring of xylopyranose and the five-membered ring of arabinofuranose are permitted into the active site (36, 44). To identify a primary amino acid sequence motif that might distinguish the Xyl/Ara-active enzymes from the glucose-active enzymes, we constructed amino acid sequence alignments for biochemically defined members of these two distinct groups. These alignments revealed a conserved motif (WWSEAL) for the Xyl/Ara enzymes that was not found in the β-D-glucosidase enzymes (data not shown). This motif may be useful for distinguishing between GH family 3 β-D-glucosidases and Xyl/Ara-active enzymes based solely on primary sequence analysis.
Xyl3A possesses a PA14 domain that forms an insertion within the C-terminal GH family 3 domain (Table 2). The precise function for the PA14 domain remains poorly defined; however, its presence in bacterial, archaeal, and eukaryotic proteins, including glycosidases, glycosyltransferases, proteases, amidases, adhesins, and bacterial toxins (57), and its predominantly β-sheet structure (56) suggest a carbohydrate-binding function. Alignment of the amino acid sequences for Xyl3A with other GH family 3 β-D-xylosidases/
-L-arabinofuranosidases suggests that the PA14 domain may be inserted within the C-terminal domain (data not shown). The predicted proximity of this region to the active site supports the possibility that the PA14 domain may aid in binding to oligosaccharide substrates. Thus, insertion of the PA14 domain in this region could influence the substrate specificity for the enzyme. A recent report identified a loop within the PA14 domain of two fungal adhesins from Candida glabrata that is responsible for determining the binding specificity (14, 75) to eukaryotic membrane-anchored glycoproteins. The amino acid sequence for the PA14 domain of Xyl3A aligns with the ligand specificity determinants for the fungal cell surface adhesins Epa6 and Epa7 (data not shown), which supports the possibility that the PA14 domain could facilitate anchoring of Xyl3A to sugars. Identification of the true functional role for the PA14 domain within Xyl3A will require further studies.
There are a number of residues that have been shown to make hydrogen bond contacts to hydroxyl groups of the glycosyl substrate within the active site for the β-D-glucan glucohydrolase (ExoI) from H. vulgare (65), and directed-mutagenesis studies in the β-glucosidase from Flavobacterium meningosepticum have confirmed the importance of these residues for catalysis (49). We identified analogous residues in Xyl3A by amino acid sequence alignments, and based on these alignments, we constructed site-directed mutants that are predicted to have important roles in catalysis (residues indicated in Table 2). The significant attenuation in activity for the mutants tested in this study (Table 3) provides support for the classification of Xyl3A as a family 3 GH.
In the gene cluster identified in this study, there is a protein just upstream of xyl3A that was annotated as a hypothetical protein. Based on the short intergenic space (31 nucleotides) between this gene and xyl3A, it is possible that a single polycistronic mRNA may encode these two gene products. Comparison of the hypothetical protein with other proteins in the GenBank database revealed that this putative protein shares significant sequence identity (30%) with an
-1,2-fucosidase from Bifidobacterium bifidum (39, 54). It is unclear whether this protein may function synergistically with Xyn10D-Fae1A and Xyl3A to hydrolyze xylan; however, studies of the substrate specificity of this protein are under way in our laboratory.
Published ahead of print on 20 March 2009. ![]()
These authors contributed equally to the work. ![]()
|
|
|---|
-L-fucosidase (AfcA), a novel inverting glycosidase (glycoside hydrolase family 95). J. Bacteriol. 186:4885-4893.
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Copyright © 2009 by the American Society for Microbiology. For an alternate route to Journals.ASM.org, visit: http://intl-journals.asm.org | More Info»