Previous Article | Next Article ![]()
Journal of Bacteriology, March 2009, p. 1688-1694, Vol. 191, No. 5
0021-9193/09/$08.00+0 doi:10.1128/JB.01551-08
Copyright © 2009, American Society for Microbiology. All Rights Reserved.

Department of Food Science, Foggia University, via Napoli 25, 71100 Foggia,1 Department of Environmental Science, Second University of Naples, Via Vivaldi, 43 81100 Caserta, Italy,3 Institut Pasteur, Biology of Gram Positive Pathogens, Department of Microbiology, CNRS URA2172, 25 Rue Du Dr. Roux, 75724 Paris Cedex 15, France,2 Unité de Génétique, Université catholique de Louvain, Institut des Sciences de la Vie (ISV), B-1348-Louvain-la-Neuve, Belgium,4 Laboratory of Microbiology, Wageningen University, Dreijenplein 10, 6703 HB Wageningen,5 NIZO Food Research, P.O. Box 20 BV, 6710 BA Ede, The Netherlands6
Received 31 October 2008/ Accepted 3 December 2008
|
|
|---|
ctsR mutant strain of L. plantarum was generated. Expression of ftsH in the
ctsR mutant strain was strongly upregulated, indicating that ftsH of L. plantarum is negatively controlled by CtsR. This is the first example of an ftsH gene controlled by the CtsR repressor, and the first of the low-G+C gram-positive bacteria where the regulatory mechanism has been identified. |
|
|---|
B factor. Class III genes, such as clp genes, are controlled by the class III stress gene repressor CtsR (designation from "class three stress gene repressor"), which binds to a specific heptanucleotide direct repeat (RGTCADN NANRGTCADN), referred to as the CtsR box (9). Genes regulated by as yet unknown mechanisms are grouped under class IV; these include ftsH, whose heat shock induction was shown to be CtsR independent in B. subtilis (9, 34). Lactobacillus plantarum, a facultatively heterofermentative LAB, is one of the most widespread LAB in the environment. A natural inhabitant of the human gastrointestinal tract, it is also found in several food fermentation products for which stress conditions such as heat, cold, and acidity are common. In wine, although L. plantarum is capable of malolactic fermentation, it usually contributes to the production of undesirable products such as biogenic amines and precursors of ethyl carbamate and is therefore generally considered a nuisance. Vinification generates multiple stress conditions, including an acidic pH, ethanol, extreme temperatures, and growth-inhibitory compounds such as fatty acids and tannins. The survival of L. plantarum in this stressful environment indicates that it has developed several tolerance and resistance mechanisms. Study of the stress response of L. plantarum is thus essential in order to understand the high adaptability of this microorganism to stress conditions.
The genome of L. plantarum WCFS1 has been completely sequenced (23). Analysis of the 5' noncoding region of the L. plantarum ftsH gene allowed us to identify a putative operator sequence highly similar to the CtsR binding site. In this work, we report that the ftsH gene of L. plantarum is heat induced and is under the control of CtsR. To our knowledge, this is the first report identifying ftsH as a novel member of the CtsR stress response regulon, and this is the first ftsH gene in low-G+C gram-positive bacteria for which the regulatory mechanism has been identified.
|
|
|---|
70 DE3 were used for DNA cloning and overexpression and were grown in Luria-Bertani (LB) broth or on LB agar plates at 37°C. L. plantarum WCFS1 (23) was routinely grown in MRS broth (7) (initial pH 6.2) at 28°C without shaking. When required, appropriate antibiotics were added at the following concentrations: ampicillin at 100 µg ml–1 and erythromycin at 200 µg ml–1 for E. coli; erythromycin at 10 µg ml–1 and chloramphenicol at 10 µg ml–1 for L. plantarum. For heat, salt, and bile stresses, 0.1 ml of stationary-phase L. plantarum cells (optical density at 600 nm [OD600], 2.6) was diluted in 30 ml of fresh MRS broth (pH 6.2), and growth was initiated at 28°C. When the OD600 reached 0.6 (pH 6.1), the cultures were transferred to water baths maintained at 42°C for various times or at 50°C for a short (5-min) heat shock. For salt and bile stresses, L. plantarum cells were harvested by centrifugation (at 4,500 x g for 10 min) and resuspended in 30 ml of fresh MRS broth containing either 0.8 M NaCl or 0.15% (wt/vol) porcine bile extract; stresses were imposed for 10 min and 1 h. Aliquots were removed, and total RNA was extracted and used for quantitative real-time PCR (qRT-PCR) analysis. The control culture was grown at 28°C in MRS medium.
The expression of the ftsH gene in the wild type was monitored over a complete culture cycle (20 h) performed at 28°C in MRS. Growth was monitored by both OD measurement (OD600) and direct plate counting. Total RNA used for qRT-PCR analyses was extracted at the various growth stages. In order to analyze ftsH expression in an L. plantarum
ctsR mutant, stationary-phase L. plantarum
ctsR cells were diluted in fresh MRS medium and allowed to grow to mid-exponential phase (OD600, 0.6 to 0.8). Total RNA was then extracted and used for qRT-PCR analysis.
The growth rates of the L. plantarum ftsH mutant and wild-type strains were determined by diluting overnight cultures 1:1,000 in fresh MRS medium and monitoring growth by OD600 measurement and direct plate counting. A complete cycle of growth at 28°C and at 42°C (heat stress condition) was monitored.
DNA manipulation and analysis. Standard methods were used for DNA manipulations, including isolation, restriction endonuclease analysis, and ligation (32). Taq polymerases, restriction enzymes, alkaline phosphatase, and T4 DNA ligase were purchased from Roche (Milan, Italy), Invitrogen (Milan, Italy), New England Biolabs (Hertfordshire, United Kingdom), Fermentas (Burlington, Ontario, Canada), and Promega (Milan, Italy) and were used as recommended by the suppliers.
Double-stranded plasmid DNA was isolated using QIAprep spin miniprep kits (Qiagen, Milan, Italy). PCR products and DNA restriction fragments were purified with the QIAquick PCR purification and gel extraction kits (Qiagen, Milan, Italy). L. plantarum chromosomal DNA was prepared using a microbial DNA extraction kit (Cabru, Milan, Italy) according to the manufacturer's procedure. For PCR experiments, 20 ng of genomic DNA from L. plantarum was added to a 50-µl PCR mixture and amplified with the Expand Long Template PCR system (Roche, Milan, Italy) by following the manufacturer's instructions. The reaction mixture was cycled through the following temperature profile: 94°C for 5 min, 5 cycles of 94°C for 1 min, 45°C for 1 min, and 68°C for 2 min; 30 cycles of 94°C for 1 min, 55°C for 1 min, and 68°C for 2 min. The PCR was ended by incubation at 72°C for 5 min. The oligonucleotides used in this study are listed in Table 1.
|
View this table: [in a new window] |
TABLE 1. Oligonucleotides used in this study
|
qRT-PCR was performed on an Applied Biosystems 7300 real-time PCR system using SYBR green I detection. The ldhD and gyrA genes of L. plantarum were used as internal controls for the analysis of ftsH gene expression during abiotic stresses (10, 15). Five microliters of 20-fold-diluted cDNA was added to 15 µl of a real-time PCR mixture containing the Power SYBR green PCR master mix (Applied Biosystems, Foster City, CA) and 100 nM each primer (Table 1). Cycling conditions included an initial denaturation-enzyme activation at 95°C for 10 min, followed by 35 cycles of 20 s at 95°C, 30 s at 58°C, and 30 s at 72°C. Fluorescence was monitored during each extension phase, and a melting-curve analysis was performed after each run to confirm the amplification of specific transcripts. Data were analyzed using AB 7300 software, by applying the two-standard-curves quantification method. Each assay included triplicate PCR of the samples, negative no-template controls, and standard curves for both the internal-control and target genes, obtained by amplifying serial dilutions (ratio, 1:10) of the cloned target sequence.
Primer extension analysis. Total RNA was isolated as described previously (30) from L. plantarum cells grown in MRS medium to mid-exponential phase at 30°C or 42°C for 15, 30, or 60 min. Primer extension products of ftsH transcripts were obtained using oligonucleotide FtsHP (Table 1), and primer extension was performed as previously described (30).
Overproduction and purification of CtsR.
B. subtilis CtsR was overexpressed and purified as previously described (9). The L. plantarum ctsR coding sequence was PCR amplified using primer pair CtsR1-CtsR2 (Table 1) and was cloned between the NcoI and XhoI sites of plasmid pET28/16 (6), generating a carboxy-terminal translational fusion with six histidine residues under the control of a T7 bacteriophage promoter. The recombinant pET2816CtsR vector was transformed into E. coli strain BL21
DE3, in which the T7 RNA polymerase gene is under the control of the inducible lacUV5 promoter (36).
The His-tagged recombinant protein was then overexpressed and purified as previously described (13). Sodium dodecyl sulfate-polyacrylamide gel electrophoresis on 15% acrylamide gels was performed as described previously (25), and protein concentrations were determined using the Bio-Rad protein assay based on the method developed by Bradford (4).
Gel mobility shift DNA binding assays. DNA fragments corresponding to the promoter region of the L. plantarum ftsH gene were generated by PCR with biotin-labeled primers (Table 1). Primers FtsH1F, FtsH2F, and FtsH1R were used to amplify two DNA fragments of 343 bp and 202 bp, with or without the predicted CtsR binding site, respectively. Binding of CtsR to DNA was carried out in a 10-µl reaction volume containing 1 µg of poly(dI-dC) (Pharmacia, Milan, Italy), 25 mM Na2HPO4/NaH2PO4 (pH 7), 150 mM NaCl, 0.1 mM EDTA, 2 mM MgSO4, 1 mM dithiothreitol, and 10% glycerol. The DNA binding reaction was initiated by the addition of CtsR, and the mixture was incubated at room temperature for 20 min. Samples were then loaded directly onto a 4% polyacrylamide gel (50 mM Tris, 400 mM glycine, 1.73 mM EDTA) for electrophoresis (14 V cm–1). Electrophoresis was performed for 1 h at room temperature. DNA fragments were transferred by semidry electrotransfer to a nylon membrane (Amersham, Milan, Italy) and revealed with horseradish peroxidase-coupled streptavidin by ECL detection (Pierce, Rockford, IL).
Construction of a chromosomal deletion mutant of the ctsR gene. The deletion mutant for L. plantarum ctsR was constructed using the Cre-lox-based mutagenesis system (26). DNA fragments corresponding to the chromosomal regions upstream (800-bp fragment; primer pair FB1ctsR-RB1ctsR) and downstream (1,200-bp fragment; primer pair FB2ctsR-RB2ctsR) of ctsR were amplified by PCR using a proofreading DNA polymerase and L. plantarum WCFS1 chromosomal DNA. The amplicons were cloned between the XhoI-SmiI and Ecl136II restriction sites of the suicide vector pNZ5319 (26), and the recombinant mutagenesis vector, pNZ5319CTSR, was introduced into L. plantarum WCFS1 by electroporation. Chloramphenicol-resistant transformants were selected and replica plated to check for erythromycin sensitivity, reflecting loss of the plasmid vector. Candidate double-crossover mutant clones were analyzed by PCR, and correct integration of the lox66-P32-cat-lox71 cassette into the genome was further verified by PCR using primer FBctsR, annealing uniquely to the genomic region, combined with the mutagenesis vector-specific primers (CatF and CatR) (Table 1). In order to excise the P32-cat selectable marker cassette, the cre expression plasmid pNZ5348 (26) was transformed into the ctsR::lox66-P32-cat-lox71 gene replacement mutant. Erythromycin-resistant and chloramphenicol-sensitive colonies were checked by PCR for Cre-mediated recombination and correct excision of the P32-cat cassette by using primers spanning the recombination locus (FBctsR and RB2ctsR) (Table 1).
ctsR deletion was confirmed by genomic DNA sequencing, and the absence of the gene transcript was verified by qRT-PCR (primers CtsRrtF and CtsRrtR) (Table 1).
Disruption of the ftsH gene. The ftsH gene of L. plantarum WCFS1 was disrupted by single-crossover plasmid integration as reported previously (39). An 870-bp internal ftsH fragment was PCR amplified using primers ftshKOF and ftshKOR and was cloned into pUC18ery between the KpnI and BamHI restriction sites. The resulting recombinant plasmid, pUCFTSH, was transformed into L. plantarum by electroporation, and candidate integrants were obtained on MRS agar plates containing 10 µg erythromycin ml–1. Correct integration of pUCFTSH in the ftsH locus was confirmed by PCR analysis using primers annealing to flanking genomic regions (ftsHF and ftsHR) combined with vector-specific primers (pUCeryF and pUCeryR) (Table 1). A single ftsH disruption mutant was selected and used in subsequent studies. The absence of the ftsH transcript was confirmed by qRT-PCR (primers ftsHrtF and ftsHrtR) (Table 1).
|
|
|---|
![]() View larger version (31K): [in a new window] |
FIG. 1. Relative mRNA levels of L. plantarum ftsH in response to various types of stress as determined by qRT-PCR. mRNA levels were calculated relative to the transcript level detected in corresponding unstressed cultures and were normalized using ldhD as an internal control. Total RNA was extracted and analyzed in the same way 10 and 60 min after exposure to stress. The data presented are averages for three independent experiments; error bars indicate standard deviations. Stress conditions were a heat stress at 42°C (open bars), osmotic stress in 0.8 M NaCl (horizontally striped bars), bile stress (0.15% porcine bile) (filled bars), and combined heat and osmotic stresses (42°C and 0.8 M NaCl) (hatched bars).
|
![]() View larger version (14K): [in a new window] |
FIG. 2. Growth of L. plantarum wild-type and ftsH mutant strains at an optimal temperature and under heat stress conditions. Cells were cultivated either at 28°C (solid lines) or at a suboptimal temperature of 42°C (dashed lines). The increase in OD600 is shown as a function of time (hours) and was monitored over 12 h for both the wild-type ( ) and ftsH mutant ( ) strains. Data shown are means ± standard deviations for one of three independent experiments.
|
![]() View larger version (41K): [in a new window] |
FIG. 3. Mapping and sequence analysis of the L. plantarum ftsH promoter. (A) Primer extension analysis of ftsH mRNA. Total RNA was isolated from L. plantarum WCFS1 cells grown to exponential phase at 30°C (control [C]) and after incubation at either 30°C or 42°C for 15, 30, or 60 min. Lanes G, A, T, and C show DNA sequencing products obtained on genomic DNA with the same primer used for primer extension. The corresponding nucleotide sequence is shown on the left. The transcription start site is indicated by an asterisk. (B) Nucleotide sequence of the ftsH promoter region. –10 and –35 sequences and the transcriptional start site are in boldface. The ctsR binding site is underlined. The translation initiation codon (ATG) is in boldface.
|
![]() View larger version (51K): [in a new window] |
FIG. 4. Overexpression, purification, and gel mobility shift assays with purified CtsR. (A) Sodium dodecyl sulfate-polyacrylamide gel electrophoretic analysis of purified His-tagged CtsR from E. coli strain BL21 DE3 carrying the recombinant pET2816CtsR plasmid. Purified recombinant CtsR proteins from B. subtilis (lane 1) and L. plantarum (lane 2) were used. The position of CtsR is indicated by an arrow. M, molecular mass standard. (B and C) Electrophoretic mobility shift assay. Biotin-labeled DNA fragments corresponding to the promoter region of ftsH were incubated with increasing amounts of purified CtsR from B. subtilis (B) and L. plantarum (C). Lanes 1, no CtsR; lanes 2 and 3, 100 and 250 ng of CtsR, respectively; lanes 4 and 5, promoter fragments lacking the CtsR box were preincubated with or without 250 ng of CtsR protein, respectively.
|
ctsR mutant.
In order to determine the role of CtsR in controlling the expression of ftsH, a
ctsR mutant strain of L. plantarum was generated (see Materials and Methods). The expression of ftsH in the
ctsR mutant strain was analyzed by qRT-PCR and compared to that of the wild type. As reported in Fig. 5, under optimal growth conditions, ftsH was more than threefold derepressed in the mutant strain relative to its expression in the wild-type control (Fig. 5A); the lack of ctsR gene expression in the mutant was confirmed by the absence of any ctsR transcript detectable by PCR (data not shown). This result indicates that ftsH expression is repressed by CtsR, in agreement with the data obtained by gel mobility shift assays. This is the first instance where the ftsH gene of a gram-positive bacterium has been shown to be under CtsR regulation, hence placing it among the class III stress genes.
![]() View larger version (19K): [in a new window] |
FIG. 5. Comparison of ftsH mRNA levels in wild-type and ctsR mutant strains of L. plantarum by qRT-PCR. ftsH expression was analyzed in wild-type (filled bars) and ctsR mutant (hatched bars) strains under optimal-temperature (30°C) growth conditions (A) and following a heat stress imposed for 5 min at 50°C (B). In all experiments, mRNA levels were normalized to that for the ldhD housekeeping gene. Under unstressed conditions (A), ftsH mRNA levels in the ctsR mutant strain were calculated relative to the mRNA level of the wild-type strain, which was assigned a value of 1. Under heat shock conditions (B), ftsH mRNA levels in the wild-type and ctsR mutant strains were calculated relative to the corresponding mRNA levels for the unstressed condition (A). Data are averages ± standard deviations of three independent experiments.
|
|
|
|---|
32) in response to varying temperatures (21, 37). Although the involvement of FtsH in protection against environmental stress has been documented for various bacterial species, little is known about the mechanisms involved in its transcriptional regulation in response to stress. To date, no known typical stress-responsive cis-regulatory element has been found in its promoter that could substantiate its classification as a "stress response gene" (20). Therefore, the ftsH gene has recently been assigned to the heat-inducible class IV genes, whose regulatory mechanisms are still unknown (9, 34). We show that, as has been reported for other bacterial species, the ftsH gene of L. plantarum is significantly induced upon exposure to stress conditions, especially heat stress. The involvement of ftsH in the stress response was also confirmed by the behavior of the mutant strain. Indeed, compared to the wild type, the ftsH mutant strain displayed a significant growth defect when subjected to heat stress.
Interestingly, the consequences of the ftsH mutation are remarkably species specific, ranging from drastic growth impairment (2) to negligible/milder effects on sporulation, development, and the stress response (11, 16, 29). For some bacteria, such as E. coli, L. lactis, and H. pylori, the apparent impossibility of isolating any viable ftsH-null mutant indicates that this protease is essential (1, 17, 31, 38). In contrast, in species such as B. subtilis and Caulobacter crescentus, FtsH seems dispensable for growth under physiological conditions (11, 16). Furthermore, minor effects on normal growth and the cellular stress response were recently observed in a
ftsH strain of Corynebacterium glutamicum (28). Since we were able to isolate a viable insertional inactivation mutant strain, FtsH is clearly not essential in L. plantarum.
According to our results, the relevance of ftsH function in L. plantarum reflects the situation observed in bacteria such as B. subtilis, C. crescentus, and C. glutamicum but with a marked contribution to growth under heat shock conditions.
Sequence analysis of the ftsH promoter allowed us to predict a potential CtsR binding site. Primer extension experiments indicate that the putative CtsR operator overlaps the promoter and occupies a position consistent with a regulatory function by this transcriptional repressor. By adopting two different experimental approaches, we have shown that L. plantarum ftsH is indeed controlled by CtsR. Purified CtsR from both B. subtilis and L. plantarum recognized and bound specifically to the ftsH promoter. Moreover, using a recently developed Cre-lox-based mutagenesis system (26), we were able to obtain a
ctsR strain in which the basal transcriptional level of the ftsH gene was significantly derepressed compared to that of the wild type. To our knowledge, this is the first report demonstrating that an ftsH gene is under the control of CtsR. ftsH transcriptional induction was still evident upon heat shock in the
ctsR mutant strain, suggesting a control mechanism involving CtsR together with one or more additional regulators. Similar results were also obtained for B. subtilis (9, 24) and L. lactis (40), where the expression of some members of the CtsR regulon appears to be controlled by additional regulators.
In conclusion, the ftsH gene of L. plantarum is involved in protection against stress, mainly heat shock, and is controlled by the class III stress gene repressor CtsR. From an evolutionary point of view, CtsR control of ftsH might be either vestigial or a novel and exclusive acquisition of the L. plantarum gene by the CtsR regulon with respect to other, closely related bacterial species. We favor the latter hypothesis. Indeed, although in Oenococcus oeni CtsR acts as a master regulator of most of the known stress response genes, it does not appear to control ftsH expression in this wine bacterium (3, 20). Although little is known about the mechanisms used by L. plantarum to adapt to environmental fluctuations, preliminary analysis of the L. plantarum genome allowed the identification of potential CtsR binding sites upstream of several genes in addition to ftsH, including those encoding small heat shock proteins (hsp18.5) and subunits of the Clp ATP-dependent protease (35; G. Spano and D. Fiocco, unpublished data). This finding strongly suggests that the particular stress conditions encountered by L. plantarum have led to the coordinated CtsR-dependent expression of ftsH with that of other stress response genes, and this possibility will be the subject of further investigation.
Published ahead of print on 12 December 2008. ![]()
|
|
|---|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Copyright © 2009 by the American Society for Microbiology. For an alternate route to Journals.ASM.org, visit: http://intl-journals.asm.org | More Info»