Previous Article | Next Article ![]()
Journal of Bacteriology, April 2009, p. 2362-2370, Vol. 191, No. 7
0021-9193/09/$08.00+0 doi:10.1128/JB.01616-08
Copyright © 2009, American Society for Microbiology. All Rights Reserved.

Fachbereich Chemie/Biochemie der Philipps-Universität Marburg, Hans-Meerwein-Str., D-35032 Marburg, Germany,1 Lehrstuhl für Biologische Chemie, Technische Universität München, Freising-Weihenstephan, Germany,2 Molecular Genetics Group, Groningen Biomolecular Sciences and Biotechnology Institute, University of Groningen, Kerklaan 30, 9751 NN Haren, The Netherlands3
Received 14 November 2008/ Accepted 9 January 2009
|
|
|---|
|
|
|---|
Copper homeostasis is well studied in gram negative bacteria such as Enterococcus hirae and Escherichia coli. In E. hirae, the process occurs at the plasma membrane and includes four genes, i.e., copY, copZ, copA, and copB. copA and copB encode two integral membrane P-type ATPases that are necessary for the transport of copper into the cells under copper-limiting conditions (20). CopA, which serves to import copper, interacts with CopZ, which acts as a copper chaperone. CopZ then chaperones the metal atom to the transcriptional repressor CopY, thereby releasing the repression of copper homeostasis genes (28, 29). In E. coli, there are several sets of genes which are responsible for copper homeostatic functions. The cusRS genes form a sensor-regulatory pair which senses copper and activates the cusCFBA genes (19). CusF is a periplasmic copper binding protein, while cusCBA gene products are homologous to a family of proton/cation antiporter complexes (7). In a second copper efflux system, regulated by CueR, a MerR-like transcriptional activation controls two copper efflux genes, copA and cueO (19), whereas cueO encodes a multicopper oxidase. In addition, the cutABCDEF genes are also believed to be involved in copper uptake, storage, delivery, and efflux (21, 23). Copper efflux is carried out mainly by heavy metal exporters which belong primarily to the integral membrane protein family of P-type ATPases (8, 9, 22, 27, 33), whose expression is controlled mainly at the level of transcription. These P-type ATPases are functional in translocating Cu(I) across the cytoplasmic membrane. The recently discovered copper-specific repressor CsoR in Mycobacterium tuberculosis belongs to an entirely new set of copper-responsive repressors, whose homologs are widely spread in all major classes of eubacteria (16). CsoR from Bacillus subtilis, which is encoded upstream of the copZA operon, is 37% homologous to M. tuberculosis CsoR, and elevated copper levels in B. subtilis are sensed by CsoR, which leads to derepression of the copZA copper efflux operon (16, 26).
In contrast, in Saccharomyces cerevisiae, high-affinity copper uptake is mediated by two transmembrane transport proteins, Ctr1p and Ctr3p. Prior to uptake, Cu(II) is reduced to Cu(I) by Cu(II)/Fe(III)-specific reductases Fre1p and Fre2p (11). The CTR1, CTR3, and FRE1 genes are activated under copper starvation and repressed under copper repletion by the copper-sensing transcription factor Mac1p (6, 36). Studies undertaken to understand the copper resistance in Pseudomonas syringae strains that infect tomato revealed that the copper resistance operon copABCD is plasmid encoded and is regulated by the two-component system copRS (3, 4, 15). Similar copper resistance (pcoABCD) and regulatory (pcoRS) genes are also plasmid encoded in E. coli (14, 31, 35). In spite of high homology between these two systems, the resistance mechanisms dealing with an excess of copper inside the cell are completely different. Copper resistance in E. coli is achieved mainly by a copper efflux mechanism, whereas P. syringae performs sequestration of excess cytosolic copper (15).
Here, we explore the role of B. subtilis YcnJ, which is a homolog of P. syringae CopCD, in copper homeostasis. The ycnJ gene from B. subtilis is highly induced under copper-limiting conditions, and a
ycnJ mutant shows reduced growth under copper-limiting conditions. Uptake components for copper in B. subtilis have not been reported so far, and we demonstrate that YcnJ is a candidate for such a function. The ycnK gene located upstream from ycnJ was investigated and shown to encode a transcriptional regulator which acts, in addition to the investigated regulator CsoR, as a copper-specific repressor for ycnJ.
|
|
|---|
|
View this table: [in a new window] |
TABLE 1. Strains and plasmids used in this study
|
Mutant construction.
Deletion mutants were generated by the long flanking homology PCR method (34). In the first-round PCR, long flanking homologous PCR fragments were amplified from upstream and downstream regions of the gene to be deleted. The 3' ends of the resulting homologous PCR products were designed to be complementary to the resistance cassette and were used in the second-round PCR, generating a fusion construct which replaces the gene of interest with a resistance marker to facilitate the selection of the mutant on antibiotic plates. The primers used in generating the mutants are listed in Table 2. All PCRs were performed using Platinum Pfx DNA polymerase (Invitrogen). Chromosomal DNA of B. subtilis ATCC 21332 was used as a template to amplify the corresponding upstream and downstream flanking regions. The Expand long-template PCR system was used to fuse the homologous flanks with the corresponding resistance markers. PCR fusion products were used directly for the transformation of B. subtilis strain ATCC 21332 to generate the
csoR,
ycnK,
ycnJ, and
csoR
ycnK mutants. Transformants were selected on the respective antibiotic-containing LB plates. Chromosomal DNA was isolated from all the mutants, and the recombinations were confirmed by PCR. The erythromycin resistance cassettes used for the construction of the
csoR and
ycnK single mutants were amplified from the pMUTIN vector. To generate the
ycnJ mutant, the spectinomycin resistance cassette was amplified from the pUS19 vector, while the resistance cassettes for the
csoR
ycnK double mutant were amplified from pMUTIN and pUS19, respectively.
|
View this table: [in a new window] |
TABLE 2. Primers
|
cells. The resulting plasmids were confirmed by restriction analysis for the integration of the fragment and transformed into BL21 cells using electroporation. Overnight cultures were grown by inoculating an isolated colony from a plate into 5 ml LB medium containing kanamycin (50 µg ml–1). The overnight cultures were used to inoculate 2 liters of LB medium containing kanamycin (50 µg ml–1) with a starting optical density at 600 nm (OD600) of 0.05. Inoculated cultures were grown under continuous shaking at 225 rpm at 35°C, and the temperature was decreased to 30°C after 1 hour. When the OD600 of the cells reached 0.5 to 0.6, IPTG (isopropyl-β-D-thiogalactopyranoside) at a final concentration of 0.1 mM was added to the culture flasks and growth was continued for 4 hours. Cells were harvested by centrifugation (Sorvall RC 5B plus), and the resulting pellets were resuspended in HEPES-A buffer (50 mM HEPES, 300 mM NaCl [pH 7.5], 1 mM dithiothreitol [DTT]) and lysed with EmulsiFlex-C5 Avestin. The lysate obtained was clarified by centrifugation (Sorvall RC 26 plus) at 17,000 rpm for 30 min, and an Ni-nitrilotriacetic acid (NTA) column was used to purify the protein using a linear gradient with HEPES-B buffer (50 mM HEPES, 300 mM NaCl, 250 mM imidazole [pH 7.5], 1 mM DTT). The purified protein was dialyzed against HEPES-A buffer containing 100 mM NaCl. Protein purity of more than 90% was observed by Coomassie blue staining of a sodium dodecyl sulfate-polyacrylamide gel.
Native gel electrophoresis.
Purified protein samples (
100 µM) were incubated with 200 µM Cu(I) or Cu(II) for about 15 to 30 min at room temperature and loaded onto 6% continuous native polyacrylamide gels. Samples were run at 100 V and 10 mA for about 4 to 5 h until the bromophenol blue ran out of the gel. Gels were stained using Coomassie blue and destained using 10% acetic acid.
Microarray analysis.
For microarray analysis, both the WT (ATCC 21332) and the
csoR mutant were grown in BMM under copper-replete conditions (growth in the presence of 0.5 mM CuCl) and copper-depleted conditions (growth in the presence of the copper-specific chelator BCS at 0.25 mM). Cultures were harvested in the mid-log phase for RNA extraction. The Macaloid/Roche method was used for the RNA extraction (13). Concentrations of RNA were measured using the nanodrop method. For reverse transcription, a solution containing 18 µl annealing mix (10 to 20 µg total RNA and 2 µl random nonamers adjusted to a final volume of 18 µl with nuclease-free water) was incubated for 5 min at 70°C and 10 min at 4°C for annealing. Reverse transcription was performed by addition of this annealing mix to a solution containing 6 µl Superscript III buffer (supplied with the reverse transcriptase), 10 mM DTT, nucleotide master mix containing aminoallyl-dUTP, and 300 U Superscript III reverse transcriptase (Invitrogen). cDNA was synthesized overnight at 42°C in a total volume of 30 µl. The aminoallyl-modified cDNA was incubated with the CyDye NHS ester (Cy3 or Cy5 monoreactive dye) at room temperature in the dark for 60 to 90 min. Labeled cDNAs were purified using Nucleo Spin Extraxt II columns, and the dye incorporation was measured using the nanodrop method. Equal quantities of Cy3/Cy5-incorporated cDNAs were mixed, dried in a Speedvac, and then dissolved in 5 µl H2O, followed by heating at 94°C for 2 min. The heated sample was subsequently mixed with 30 µl preheated hybridizing buffer (68°C), hybridized onto microarray glass slides, and incubated overnight at 68°C in a hybridization oven.
Microarray data analysis. Hybridized DNA arrays were read using a GenePix 4200AL autoloader (Axon Instruments), and the data obtained were processed with ArrayPro 4.5 (Media Cybernetics Inc., Silver Spring, MD) ArrayVision software. Expression levels were processed and normalized (Lowess method) with Micro-Prep (10, 32). The ln-transformed ratios of the expression levels of mutant versus WT were subject to a t test using the Cyber-T tool (2). Three independent measurements for each condition along with a dye swap were analyzed. The results obtained were averaged, the raw data were processed to Cyber-T web interface software for the calculation of the expression ratios, and the data were exported to Microsoft Excel.
Estimation of copper concentrations inside cells.
Total cytoplasmic copper concentrations were measured using inductively coupled plasma mass spectrometry. B. subtilis strain ATCC 21332 and the
csoR mutant were grown in BMM overnight. Fresh BMM (100 ml) either with 0.5 mM copper in excess or under copper-limiting conditions achieved by addition of 0.25 mM BCS was inoculated with overnight cultures with a starting OD600 of 0.05, and the cells were harvested in mid-log phase. Cells were centrifuged at 13,000 rpm (18,000 x g) for 5 min, and the pellets were washed three times with buffer containing 10 mM Tris-HCl (pH 7.5) and 1 mM EDTA and finally with MilliQ water. Cells were dried overnight at 85°C, and the total copper concentration was determined by breaking the cells using nitric acid.
Dot blot analysis. B. subtilis strains were grown under normal (BMM), copper limited (BMM plus 0.25 mM BCS), and copper-replete (BMM plus 0.5 mM copper in excess) conditions. Overnight cultures were inoculated into fresh medium to an initial OD600 of 0.05, and cells were harvested at an OD600 of 0.25. Total RNA was isolated from these cells using the RNAZol method (http://microarrays.nki.nl/download/protocols.html). RNA concentrations were measured using the nanodrop method at 260 nm/280 nm. The ratios of RNA concentration to protein concentration were above 1.65 in all samples. Denaturing gel electrophoresis was run to test the quality of RNA for 16S and 23S RNAs. Two micrograms of RNA from each sample was subsequently dotted onto a nylon membrane using a dot blot apparatus and hybridized after UV cross-linking with a UTP-11-digoxigenin-labeled antisense RNA probe specific for ycnJ mRNA. The riboprobe was synthesized by in vitro transcription using T7 RNA polymerase. The T7 promoter sequence was introduced into the PCR product of the ycnJ gene by using primers 5'-AGCTCGTCAAACGGACGAGACG-3' and 5'-TAATACGACTCACTATAGGGGAAATCCATCAAAATGCCGACCG-3' (the T7 promoter extension is underlined). After hybridization and washing, the filters were treated with a digoxigenin-specific antibody fragment conjugated with alkaline phosphatase (Roche) and AttoPhos (Amersham Biosciences) as an enhanced chemifluorescence substrate. The hybridization signals were detected with a Storm860 fluorescence imager, and relative signal quantification was performed with ImageQuant software.
|
|
|---|
csoR mutant (BMM without Cu) compared with WT (BMM without Cu), (iii) WT (BMM plus Cu) compared with WT (BMM), and (iv)
csoR mutant (BMM plus Cu) compared with WT (BMM plus Cu). The essential results from these experiments are summarized in Table 3. B. subtilis WT cultures grown under copper-limiting conditions (without Cu) show a significant increase in the upregulation of the copper-responsive genes ycnI, ycnJ, ycnK, and ycnL. In contrast, in the WT the same genes are significantly downregulated in copper-replete medium (plus Cu). Thus, we speculated that these genes play a possible role in copper acquisition. To investigate this hypothesis, deletion mutants were constructed and checked for their ability to grow under different copper availability conditions. The
ycnK mutant showed no or little difference in growth under copper-limiting conditions (Fig. 1B). In contrast, it exhibited enhanced growth under copper excess conditions (Fig. 1A). On the other hand, the
ycnJ mutant exhibited a growth-defective phenotype under copper-limiting conditions (Fig. 1B), suggesting an important role for YcnJ in copper import. In case of the
ycnL mutant, no effect on growth under both conditions was observed (data not shown). |
View this table: [in a new window] |
TABLE 3. Microarray results
|
![]() View larger version (27K): [in a new window] |
FIG. 1. (A) Analysis of copper-dependent growth in BMM with 1 mM copper in excess. Growth curves of the WT (), the ycnJ mutant ( ), and the ycnK mutant ( ) are shown. The insets show the phenotypes of the WT and the ycnJ and ycnK mutants on BMM with 1 mM copper in excess. (B) Analysis of copper-dependent growth in BMM with 0.5 mM BCS. Growth curves of the WT (), the ycnJ mutant ( ), and the ycnK mutant ( ) are shown. The insets show the phenotypes of the WT and the ycnJ and ycnK mutants on BMM agar with 0.5 mM BCS.
|
135 aa) is homologous to the periplasmic protein CopC, a copper binding protein which is involved in copper uptake in P. syringae (1, 5). The putative copper binding amino acid residues (His-24, Glu-51, Asp-108, and His-110) identified within the N-terminal region of YcnJ are highly homologous to the Cu(II) binding sites in CopC (1). The C-terminal region of YcnJ (401 aa) represents a transmembrane domain that is homologous to the inner membrane copper transport protein CopD of P. syringae (1, 5). Alignments of the N- and C-terminal regions of YcnJ with CopC and CopD are shown (Fig. 2). For the genes ycnK and ycnL, encoding a putative transcriptional regulator and a putative signal permease, respectively, several metal binding sites (Cys-x-x-Cys and Cys-x-Cys) were identified. YcnK was identified as a putative transcriptional regulator with a conserved helix-turn-helix motif in its N-terminal region and a C-terminal region with a sensor function. The sensor function is defined by a NosL superfamily motif which indicates specific binding of Cu(I) (17). Apart from these genes, the copper-inducible copZA operon, encoding a copper chaperone and an efflux ATPase, was found to be strongly upregulated in the
csoR mutant, suggesting a considerable role of CsoR in copper efflux as recently described (26).
![]() View larger version (63K): [in a new window] |
FIG. 2. Alignment of amino acid sequences of P. syringae CopC and CopD and B. subtilis YcnJ (ClustalW). NT, N terminal; CT, C terminal. Arrows indicate conserved copper binding residues. Highlighted amino acids represent the predicted transmembrane domains.
|
ycnK mutant was found to upregulate ycnJ expression during copper excess approximately twofold compared to the WT (Fig. 3B). This points to a function of YcnK in which it acts as a negative regulator of ycnJ. Since this function is present mainly under conditions of high copper concentrations, YcnK is predicted to use copper as a corepressor. In addition, enhanced growth of the ycnK mutant under copper excess conditions was observed (Fig. 1A). Thus, as long as toxic copper concentrations are compensated for by copper efflux detoxification systems such as CopZA, induction of the predicted copper uptake system YcnJ is not detrimental for cell growth without carbon and energy source limitation.
![]() View larger version (32K): [in a new window] |
FIG. 3. Transcriptional analysis of ycnK- and csoR-dependent ycnJ expression. Two micrograms of total RNA isolated from the WT and mutants under normal, 0.25 mM BCS, and 0.5 mM copper excess conditions was blotted onto a nylon membrane by dot blotting and hybridized with a digoxigenin-UTP-labeled antisense riboprobe specific for the ycnJ transcript. Hybridization signals were detected by using a digoxigenin-specific antibody fragment conjugated with alkaline phosphatase and AttoPhos as chemifluorescence substrate. (A) ycnK-dependent expression of ycnJ with different copper concentrations. (B) ycnK-dependent expression of ycnJ under increasing copper concentrations. (C) Expression of ycnJ in the WT and the ycnK and csoR ycnK mutants under normal conditions.
|
csoR background during the microarray studies. Since absence of the CsoR repressor leads to strong derepression of the copZA copper efflux system (26), effects of CsoR on ycnJ expression might be regarded as rather indirect via modulating the intracellular copper concentration and, in the course of that, also YcnK activity. However, when the
csoR and
ycnK backgrounds were combined in a
csoR
ycnK double mutant which was tested for ycnJ expression, an additional elevation of ycnJ expression compared to that in the
ycnK mutant was observed (Fig. 3C), suggesting also a direct participation of CsoR in ycnJ regulation.
Estimation of intracellular copper content.
To further verify the predicted roles of ycnJ and ycnK as a copper uptake mediator and corresponding regulator, respectively, total intracellular copper contents were measured by using inductively coupled plasma mass spectrometry analysis. These studies revealed that the
ycnK mutant contains approximately double the amount of cytoplasmic copper (511.1 ppb) in the WT (278,87 ppb) and the
ycnJ mutant (205.0 ppb). These high values are a result of copper accumulation under copper excess conditions. In agreement with the dot blot results, these findings suggest that YcnK may act as a negative transcriptional regulator of copper uptake that is active in the presence of copper. In addition, the entire copper contents within the WT and
ycnJ cells under normal and copper-limiting conditions were determined. The results revealed that the amount of copper in WT cells grown in the presence of the copper-specific chelator BCS is approximately twofold higher (3.58 ppb) than that in cells those grown without the addition of BCS (1.84 ppb). This might be a possible consequence of ycnJ upregulation under copper-limiting conditions, where the
ycnJ mutant under normal conditions holds only 1.2 ppb (Fig. 3A). The total copper content measured in the
ycnJ mutant when grown in the presence of BCS was found to be 1.57 ppb and thus more than twofold less than that in the WT under these conditions. Together with the growth experiments, this supports the supposed role for YcnJ in copper acquisition under copper-limiting conditions.
Copper-induced oligomerization of CsoR and YcnJ. We cloned and overexpressed CsoR and the cytosolic domain (N-terminal 135 aa) of YcnJ to examine possible formation of oligomeric complexes in the presence of copper by using native gel electrophoresis. Polyacrylamide gels (6%) were loaded with assay mixtures containing protein samples that were incubated with and without 0.1 mM CuCl and 0.1 mM DTT. DTT was added to minimize the conversion of Cu(I) to Cu(II). A gel shift of the CsoR protein sample was observed in the presence of 0.1 mM CuCl and 0.1 mM DTT (Fig. 4B). Binding was also tested in the presence of the strong metal chelator EDTA. While incubation of a protein sample with 0.5 mM EDTA alone resulted in no shift, the shift was not abolished in the presence of EDTA and copper (Fig. 4B), indicating that CsoR has higher affinity to Cu(I) than EDTA. A similar observation has been made previously in binding competition experiments with CsoR and BCS (16). To define the half-maximal copper concentration (Cu0.5), it was necessary to saturate the CsoR protein; different copper concentrations of between 10 and 80 µM were added to the assay mixture, keeping the protein concentration constant at 80 µM. The formation of cysteine thiolate-copper complex was measured at 240 nm (Fig. 5), and the calculated Cu0.5 was found to be at 35.5 µM, suggesting a Cu(I)-CsoR complex stoichiometry of 1:1.
![]() View larger version (31K): [in a new window] |
FIG. 4. Copper-induced oligomerization. (A) The N-terminal part (135 aa) of recombinant YcnJ protein, purified using Ni-NTA chromatography, was loaded on denaturing 17% sodium dodecyl sulfate gel along with markers. The molecular mass of the protein was observed to be 16.5 kDa, including the His6 tag and two additional amino acids before the start codon (left panel). A native 6% polyacrylamide gel was loaded with 15 µg of purified protein either without metal preincubation as a control (first lane) or after incubation with either 0.2 mM CuCl or 0.2 mM CuSO4 (right panel). (B) CsoR recombinant protein, purified using Ni-NTA chromatography, was loaded on a denaturing 17% gel along with markers, and the molecular mass of the protein was observed to be 12.5 kDa, including the His6 tag (left panel). Copper binding studies were performed in a 6% native gel, in which lanes were loaded with 80 µg purified protein incubated without or with 200 µM Cu(I) and/or 100 µM EDTA as indicated (right panel). (C) YcnK recombinant protein, purified using Ni-NTA chromatography, was loaded on a denaturing 17% gel along with markers, and the molecular mass of the protein was observed to be 23 kDa, including the His6 tag (left panel). Metal binding studies with purified proteins were performed in 6% native gels. Lane 1 is loaded with 100 µg purified protein. Protein samples incubated with 200 µM Cu(I) and 200 µM Cu(II) are loaded in lanes 2 and 3.
|
![]() View larger version (9K): [in a new window] |
FIG. 5. Estimation of cysteine thiolate bond formation. Purified CsoR protein (80 µM) was incubated with different copper concentrations ranging from 10 µM to 80 µM, and the corresponding cysteine thiolate-copper complex formation was measured at 240 nm. The values obtained were plotted on a graph, and the Cu0.5 was determined.
|
In the case of YcnK, which was also recombinantly expressed and tested for copper-induced oligomerization, no such oligomerization in the presence of copper was observed (Fig. 4C). However, since oligomerization may also take place in the absence of copper and might additionally become further stabilized but not altered by addition of the metal, as already suggested for M. tuberculosis CsoR (16), there is yet no indication that YcnK does not oligomerize or does not bind copper at all.
Conclusions.
Transcriptome studies were performed to identify genes involved in copper homeostasis in B. subtilis. So far, copper transport in B. subtilis is known only as a function of efflux, which is mediated by the CsoR-dependent CopZA system and the nonspecific cation diffusion facilitator CzcD, which is repressed by the ArsR homolog CzrA (18, 26). Components and mechanisms of copper uptake have not yet been identified. In our approach, we have identified genes that were upregulated by copper deprivation and downregulated under copper excess. The ycnJ gene was especially highly upregulated under copper-limiting conditions. The sequence homology studies reveal that YcnJ is highly homologous at its N terminus to CopC and at its C terminus to CopD from P. syringae. Unlike P. syringae, in which copper uptake is assisted by two distinct proteins (CopC and CopD), B. subtilis YcnJ is organized in a single polypeptide chain that facilitates the direct transfer of copper ions across the membrane. Studies undertaken with P. syringae demonstrate either that the CopC protein could interact with CopA and perhaps the outer membrane protein CopB to perform copper sequestration or that CopC along with CopD may function in copper uptake. Disruption of the ycnJ gene in B. subtilis resulted in a growth-defective phenotype under copper-limiting conditions and a reduced intracellular copper content. Thus, these findings indicate that the primary role of YcnJ in B. subtilis is associated with copper uptake. A putative resistance function as observed for CopC in P. syringae cannot be excluded. However, since this resistance was described for the periplasmic compartment, this might be a rather secondary function in B. subtilis. In an attempt to find the possible transcriptional factors that regulate the expression of ycnJ, mutants with a deletion of the unknown transcriptional regulator gene ycnK in combination with a deletion of the recently identified copper-sensing repressor gene csoR were constructed and the ycnJ expression was quantified using dot blots. The
ycnK mutant showed elevated expression of ycnJ compared to the WT, especially under copper excess conditions. Expression was further elevated in the background of the
csoR
ycnK double mutant, suggesting that both regulators participate in ycnJ expression control. The current model for copper homeostasis for B. subtilis (Fig. 6) shows the novel components presented here and indicates the regulatory connection between copper uptake and efflux systems. As far as this interplay has been investigated, it points out the demands on a system that is developed to maintain the essential accurate levels of copper inside the cell and, at the same time, to avoid passage over the critical threshold of copper toxification in order to allow proper physiological function.
![]() View larger version (21K): [in a new window] |
FIG. 6. Current model of copper homeostasis in B. subtilis, including functional components for copper uptake and efflux as well as their cognate repressors. Depending on their association with copper, the active state of transcriptional repressors YcnK and CsoR is shown in green, and the inactive state of transcriptional repressors is shown in red. The negative regulation of components (–) is indicated with dashed arrows. Copper sensing (s) is indicated with dotted arrows. Cu, copper; CM, cytoplasmic membrane; in, intracellular; ex, extracellular.
|
Published ahead of print on 23 January 2009. ![]()
|
|
|---|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Copyright © 2009 by the American Society for Microbiology. For an alternate route to Journals.ASM.org, visit: http://intl-journals.asm.org | More Info»