Regulation of the Bacillus subtilis fur and perR Genes by PerR: Not All Members of the PerR Regulon Are Peroxide Inducible

Media and growth conditions.B. subtilis strains were grown at 37°C in Luria broth (LB) or minimal medium containing 40 mM potassium morpholinepropanesulfonic acid (MOPS) (adjusted to pH 7.4 with KOH), 2 mM potassium phosphate buffer (pH 7.0), glucose (2%, wt/vol), (NH₄)₂SO₄ (2 g/liter), MgSO₄ · 7H₂O (0.2 g/liter), trisodium citrate · 2H₂O (1 g/liter), potassium glutamate (1 g/liter), tryptophan (10 mg/liter), 3 nM (NH₄)₆Mo₇O₂₄, 400 nM H₃BO₃, 30 nM CoCl₂, 10 nM CuSO₄, 10 nM ZnSO₄, and MnCl₂ and FeCl₃ added to the concentrations indicated (5). Ampicillin (100 μg ml⁻¹), spectinomycin (150 μg ml⁻¹), or kanamycin (40 μg ml⁻¹) was used for selection of E. coli strains. Erythromycin (1 μg ml⁻¹) and lincomycin (25 μg ml⁻¹; for testing of macrolide-lincosamide-streptogramin B resistance), spectinomycin (100 μg ml⁻¹), kanamycin (10 μg ml⁻¹), neomycin (10 μg ml⁻¹), and chloramphenicol (5 μg ml⁻¹) were used for the selection of various B. subtilis strains.

Bacterial strains, phage, and plasmids.The B. subtilis strains and phage, E. coli strain, and plasmids used in this study are described in Table 1. SPβ phage are derivatives of SPβc2Δ2 (35) and were constructed by integration of a promoter region-cat-lacZ operon fusion constructed in pJPM122 into strain ZB307A as described previously (29). SPβ-transducing lysates were produced by heat induction from the indicated lysogens.

Construction of perR::kan and fur::kan mutant strains.A fragment containing perR was amplified from B. subtilis CU1065 DNA with forward primer 5′-GCAAGCTTGAGTATATGGGAAT-3′ and reverse primer 5′-GGAATTCGGAAAAGAATTTGATGAGTC-3′ to introduced HindIII and EcoRI sites (underlined). The HindIII-EcoRI-digested fragment was cloned into pGEM-cat, generating plasmid pMF20. The SacI-HincII fragment from pDG780 containing a kanamycin resistance cassette was inserted between SacI and XmaI sites within perR to generate pMF21. CU1065 was transformed with ScaI-digested pMF21 with selection for kanamycin resistance, and transformants were screened for loss of plasmid-borne chloramphenicol resistance to distinguish single-crossover from double-crossover recombination. The resulting CU1065 perR::kan strain was designated HB2078. The presence of perR::kan in the strain was confirmed by PCR and Southern analysis. The isogenic fur mutant was constructed by transformation of CU1065 with chromosomal DNA from HB6543 (fur::kan) (3).

DNA manipulations and sequencing.Isolation of B. subtilis chromosomal DNA, transformation, and specialized SPβ transductions were done by standard procedures (7). E. coli plasmid DNA and restriction enzyme fragments were isolated with the QIAprep spin miniprep and PCR purification kits, respectively (Qiagen Inc., Chatsworth, Calif.). Restriction endonucleases, DNA ligase, Vent DNA polymerase (New England Biolabs, Beverly, Mass.), Pfu DNA polymerase (Stratagene, La Jolla, Calif.), RNase-free DNase, and avian myeloblastosis virus reverse transcriptase (Promega Corp., Madison, Wis.) were used in accordance with the manufacturers' instructions. DNA sequencing was performed with AmpliTaq-FS DNA polymerase and dye terminator chemistry by the DNA services facility of the Cornell New York State Center for Advanced Technology-Biotechnology.

DNase I footprinting assays.Purification of B. subtilis Fur and PerR and DNase I protection assays were performed as previously described (2, 18). G+A sequencing ladders were generated as previously described (23), with incubation at 104°C for 20 min. PCRs were used to amplify templates for the footprinting experiments. The primer pairs used were as follows: for perR, 5′-GCAAGCTTGAGTATATGGGAAT-3′ and 5′-GGGGATCCGAGCCATAGAGTTAAC-3′; for fur, 5′-GCGCTGATTTCATCTCTCTTT-3′ and 5′-GGATGAGTGCAGTTGTTTCTTA-3′. Fragments were purified and digested with the appropriate restriction enzymes, and the ends were filled in with [α-³²P]dATP and the E. coli polymerase I Klenow fragment (exo⁻; New England Biolabs).

Primer extension analysis.For mapping of the fur promoter, HB0509 (perR mutant) cells were grown in LB and total RNA was isolated at the end of logarithmic growth essentially as previously described (10). For the perR promoter, total RNA was isolated from mid-logarithmic-phase cells with an RNAWIZ kit (Ambion). Primer extension reactions were set up as follows. Thirty micrograms of RNA was hybridized to ∼2 pmol of the appropriate end-labeled primer in buffer containing 60 mM NaCl, 50 mM Tris-HCl (pH 7.9), 10 mM dithiothreitol (DTT), and 40 U of RNasin (Promega). Following hybridization, extension buffer (72 mM NaCl, 50 mM Tris-HCl [pH 7.9], 10 mM DTT, 20 mM MgCl₂), deoxynucleoside triphosphates, and avian myeloblastosis virus reverse transcriptase were added to the mixture, which was incubated at 37°C for 30 min. The primer extension products were precipitated, resuspended in sequence loading buffer, and loaded onto a 6% acrylamide sequencing gel. A PCR cycle sequencing kit (Epicenter) was used to generate sequencing ladders corresponding to the perR and fur promoter-operator regions.

Northern analysis of fur.Samples for Northern analysis were prepared as described for the resuspension experiment and collected at 3 h after resuspension. Total RNA was isolated with RNAWIZ reagent (Ambion). A 5-μg sample of total RNA was then separated with a 1% formaldehyde gel, transferred to nylon membrane, and hybridized with radiolabeled probe at 50°C overnight in ULTRAhyb solution (Ambion). Membranes were then washed twice with 2× SSC (1× SSC is 0.15 M NaCl plus 0.015 M sodium citrate) plus 0.1% sodium dodecyl sulfate (SDS), followed by two washes with 0.5× SSC plus 0.1% SDS for 15 min at 50°C. The fur probe was prepared by Sau3AI digestion of the PCR product containing the complete coding region of fur, which contains three internal Sau3AI sites. The digested products were purified and labeled with [α-³²P]dATP and the Klenow fragment of DNA polymerase.

Construction of cat-lacZ reporter fusions.For the fur-cat-lacZ fusion, the promoter region of fur was amplified from HB1000 chromosomal DNA by a PCR with 5′-GATCCTCTAAGCTTTTTTAAAATC-3′ as the forward primer and 5′-ATCAACGGATCCGAACTC-3′ as the reverse primer. The PCR mixture contained 50 μM deoxynucleoside triphosphates, 100 pmol each of the forward and reverse primers, 2 U of Vent DNA polymerase, and Vent buffer in a total volume of 100 μl. The reaction mixtures were subjected to denaturation for 2 min at 94°C, followed by 30 cycles of 10 s at 95°C, 30 s at 50°C, 30 s at 72°C, and a final extension of 5 min at 72°C. The resulting PCR product was cloned into pJPM122 as a HindIII-to-BamHI fragment (underlined sites) to generate pHB6518. The insert was verified by sequencing. pHB6518 was linearized and used to transform ZB307A with selection for neomycin resistance to generate strain HB6560. Phage generated from this strain (SPβ6560) was used to move the fur-cat-lacZ operon fusion into various strain backgrounds as indicated.

For the perR-cat-lacZ fusion, an EcoRV-HincII fragment from pSK1 containing the perR promoter was cloned into the EcoRV site of pBSK, generating pAFH3. The BamHI-HindIII fragment from pAFH3 was cloned into pJPM122 to generate reporter fusions as described above. The mrgA, katA, ahpC, and zosA-cat-lacZ fusions are described elsewhere (1, 3, 6; Gaballa and Helmann, submitted). The DNA fragments used for cat-lacZ fusions contained all of the putative promoters and Per boxes. The fragments used to generate promoter fusions extended from −464 to +47 for mrgA, from −304 to +265 for katA, from −332 to +32 for zosA, from −1326 to +159 for ahpC, from −90 to +97 for perR, and from −120 to +312 for fur (all relative to the start codon). The hemA-lacZ fusion was constructed by Campbell integration of a plasmid containing hemA-lacZ (6). The hemA-lacZ fusion was moved to different backgrounds by transformation with HB1041 (CU1065 hemA-lacZ) chromosomal DNA and selection for chloramphenicol resistance.

β-Gal assays.For resuspension experiments, overnight cultures of cells grown in LB containing appropriate antibiotics were transferred at a 1:100 dilution into fresh MOPS-buffered minimal medium with 10 μM FeCl₃ and 5 μM MnCl₂. The overnight cultures were transferred again at a 1:100 dilution into the same minimal medium. The cells were incubated until the optical density at 600 nm was about 0.2. The cells were then washed once with minimal medium with no added FeCl₃ or MnCl₂, collected by centrifugation, and resuspended in minimal medium either with no added FeCl₃ or MnCl₂ or with 10 μM FeCl₃, 5 μM MnCl₂, or both. This time point was designated time zero. Samples were removed for β-galactosidase assay (β-Gal) at the indicated times by the method of Miller as described previously (5, 24). All assays were performed on duplicate samples, and the values were averaged. Glassware was acid washed when possible.

For experiments with the fur and mntR mutant strains (see Fig. 5), overnight cultures of cells grown in LB containing appropriate antibiotics were transferred at a 1:100 dilution into fresh MOPS-buffered minimal medium with 10 μM Fe(III). The overnight cultures were transferred again at a 1:100 dilution into minimal medium with either 1 or 10 μM Fe(III) (as indicated) and the indicated concentration of Mn(II). Cells in mid-log phase were collected for β-Gal assay.

Peroxide induction experiments.Cell samples at 2 h after resuspension (see resuspension experiment protocol described above) were transferred into new tubes (prewarmed at 37°C). H₂O₂ (100 μM) was added, and samples were taken for β-Gal assay after 30 and 60 min.

Polyclonal anti-PerR Ab production and immunoblotting experiments.Purified PerR was submitted to the Cornell University Animal Research Laboratory for production of rabbit polyclonal antibodies (Ab). Immunodetection was performed with crude extracts by SDS-polyacrylamide gel electrophoresis, followed by electroblotting onto polyvinylidene difluoride membrane (Bio-Rad). Membranes were blocked with 50 mg of nonfat dried milk per ml at 4°C. Anti-PerR Ab was added at a dilution of 1:500 in Tris-buffered saline (TBS) with 0.05% Tween 20. After incubation for 1 h at room temperature, the membrane was washed three times in TBS-Tween 20. Goat anti-rabbit Ab conjugated to alkaline phosphatase (Bio-Rad) was used as the secondary Ab at a concentration of 1:3,000. After incubation for 1 h, the membrane was washed three times in TBS-Tween 20 and once in TBS. The colorimetric signal was visualized by incubation with alkaline phosphatase substrate (Bio-Rad) in development buffer in accordance with the manufacturer's protocols.

Identification of PerR-binding sites in the perR and fur promoter regions.We have previously identified five operons within the PerR regulon (mrgA, katA, ahpCF, hemAXCDBL, and zosA) (1, 3, 4, 6; Gaballa and Helmann, submitted). To identify additional candidate components of this regulon, we searched the B. subtilis genome with the 15-bp Per box consensus sequence (TTATAATnATTATAA; reference 17) and found additional candidate Per boxes upstream of the perR and fur genes.

Two overlapping Per boxes are present upstream of the perR gene (Fig. 1A), which is suggestive of a role in autoregulation. By primer extension start site mapping, we determined that transcription initiates from a σ^A-type promoter at an A residue 45 bp upstream of the start codon (Fig. 1B). The upstream Per box overlaps the −10 consensus sequence. In DNase I footprinting experiments, as little as 10 nM PerR protected an ∼25-bp region surrounding the transcription start site against DNase I digestion (Fig. 1C). This is comparable to the affinity of PerR for other operator regions that have been studied (18).

• Open in new tab
• Download powerpoint

FIG. 1.

Interaction of PerR with the perR regulatory region. (A) The −35 and −10 regions of the perR promoter are underlined, and the two overlapping Per box elements are indicated. The A residue start site for transcription is in bold. Regions of both DNA strands protected against DNase I digestion by bound PerR protein are indicated by broken double lines. (B) Primer extension mapping of the perR transcriptional start site (arrow) indicates transcript initiation with the A residue indicated in the sequence to the left. (C) DNase I footprint of purified PerR binding to the perR promoter. PerR was added at the concentrations (nanomolar) indicated in the presence of 10 μM Mn(II). Shown are results from footprinting on the bottom strand; however, top-strand analysis was also performed (data not shown). The regions protected against digestion, as determined by alignment with G+A sequencing ladders (data not shown), are summarized in panel A.

Genome searches also revealed a consensus Per box in the fur regulatory region. The DNA sequence of the fur gene (Fig. 2A) contains a candidate σ^A-dependent promoter with a 12-of-14 match to the −35 and extended −10 consensus sequences (16). Primer extension analysis, performed with RNA isolated from late-logarithmic-phase (transition phase) cells, identified two transcripts that initiated at A and G residues located 25 and 27 nucleotides upstream from the fur start codon (Fig. 2B). PerR bound tightly to the fur operator; strong protection was again observed with as little as 10 nM PerR (Fig. 2C). These results are consistent with a direct role of PerR as a repressor of the fur gene. However, since Per and Fur boxes are similar in sequence, this region can also be interpreted as a weak (12-of-19) match to the Fur box, raising the possibility that fur is autoregulated. However, no Fur binding was observed, even at a concentration of 100 nM (data not shown). At known Fur-regulated promoters, 10 nM Fur is usually sufficient to saturate binding (N. Baichoo and J. D. Helmann, submitted for publication). These results indicate that Fur does not interact directly with its own promoter and suggest, instead, that Fur is regulated directly by PerR (see below).

• Open in new tab
• Download powerpoint

FIG. 2.

Interaction of PerR with the fur regulatory region. (A) The −35 and −10 elements of the fur promoter are underlined, and the transcriptional start sites are in bold. The Per box upstream of the −35 element is indicated. Regions of both DNA strands protected against DNase I digestion by bound PerR protein are indicated by broken double lines. (B) Primer extension mapping of the transcription start sites of the fur gene. Transcription initiates at the indicated A and G residues. (C) DNase I footprint of PerR binding to the fur operator region. The results shown are for the bottom strand. Purified PerR was added at the concentrations indicated in the presence of 10 μM Mn(II). The bold line adjacent to the G+A ladder indicates the position of the Per box, and the protected region is bracketed.

Patterns of metalloregulation within the PerR regulon.All of the components of the PerR regulon that have been described are repressed by addition of manganese to the growth medium, and in some cases, repression by iron has also been observed. We sought to directly compare the metalloregulation of all of the components of the PerR regulon under identical conditions. To monitor expression of perR and fur, we constructed transcriptional fusions between the corresponding regulatory regions and lacZ and integrated the resulting cat-lacZ operon fusions into the SPβ prophage. Similar reporter constructs were used for the other PerR regulon genes, with the exception of the hemA promoter, which was fused to a lacZ reporter gene by plasmid integration (Table 1).

To compare the abilities of Mn(II) and Fe(III) to repress PerR-regulated genes, we used resuspension experiments as previously described (3, 5). In these studies, cells were grown to mid-logarithmic phase, harvested, and resuspended in minimal medium containing various levels of Mn(II) and Fe(III). In confirmation of our previously reported studies (3, 5), expression of an mrgA-cat-lacZ fusion is very low when cells are resuspended in minimal medium containing either 5 μM Mn(II), 10 μM Fe(III), or both. Only when both metal ions are omitted from the medium does gene expression commence (Fig. 3A). This supports the suggestion that either Mn(II) or Fe(II) can function in vivo as a corepressor with PerR. Similar patterns of metalloregulation were observed for the katA (Fig. 3B) and ahpC (Fig. 3D) promoter fusions. Repression of hemA by iron was inefficient but still observable (Fig. 3E).

• Open in new tab
• Download powerpoint

FIG. 3.

Metal selectivity of gene regulation in resuspension experiments. Cells were resuspended in minimal medium either containing no added Mn(II) or Fe(III) (open circles) or containing 5 μM Mn(II) (filled triangles), 10 μM Fe(III) (filled squares), or both (filled circles). Strains contained mrgA-cat-lacZ (A), katA-cat-lacZ (B), zosA-cat-lacZ (C), ahpC-cat-lacZ (D), hemA-cat-lac (E), perR-cat-lacZ (F), or fur-cat-lacZ (G). Samples were taken at the times indicated and assayed for β-Gal activity. The results shown are representative of at least three independent experiments; error bars represent the standard error of the mean of duplicate samples. Panel H is a Northern blot analysis of the fur transcript from cultures collected 3 h after resuspension in minimal medium containing the indicated metal ion supplementation.

In contrast, expression of the perR-cat-lacZ (Fig. 3F) and fur-cat-lacZ (Fig. 3G) fusions increased after resuspension in medium lacking both metal ions or containing added Fe(III). Only when Mn(II) was present was expression efficiently repressed by PerR. Even addition of 100 μM Fe(III) did not repress gene expression nearly as efficiently as 5 μM Mn(II) (data not shown). A similar pattern was observed for the zosA gene: expression was repressed by Mn(II) but not by iron (Fig. 3C). The manganese selectivity of transcriptional repression was corroborated by additional studies: immunoblotting with anti-PerR Ab demonstrated that cells grown with 5 μM Mn(II) had 2.4-fold lower levels of PerR protein, whereas iron supplementation led to a slight (1.2-fold) increase in PerR (data not shown). Similarly, the effects of metal ions on fur transcription were measured by Northern analysis: Fe(III) supplementation slightly increased mRNA levels, while Mn(II) decreased mRNA levels (Fig. 3H). Repression of zosA is also selective for Mn(II), as judged by Northern analysis (data not shown).

Role of PerR in metalloregulation.The diverse responses of the various components of the PerR regulon to metal ion supplementation could be due to the combinatorial effects of multiple metalloregulatory proteins. For example, it is possible that PerR mediates Mn(II)-dependent repression while Fur might contribute to the iron-dependent effects. To determine whether the effects of manganese and iron require PerR, Fur, or both, we repeated these studies after transfer of the reporter fusions to perR and fur mutant strains. For this analysis, we compared the levels of β-Gal 3 h after resuspension in minimal medium containing 5 μM Mn(II), 10 μM Fe(III), neither, or both. The results for the wild-type strain (from Fig. 3) are summarized in Fig. 4A. Note that Mn(II) addition led to decreased expression of all of the genes, while iron supplementation had a variable effect.

• Open in new tab
• Download powerpoint

FIG. 4.

Roles of PerR and Fur in metalloregulation of PerR regulon genes. Resuspension experiments were performed as described in the legend to Fig. 3 with all seven promoter fusions (indicated at the bottom of panel C) in either the wild-type (A) background or the fur (B) or perR (C) mutant strain background. All samples were measured 3 h. after resuspension and normalized to the level in medium lacking manganese and iron supplementation (white bars; absolute values are shown above the bars). The cells were resuspended in minimal medium either containing (from left to right) no added Mn(II) or Fe(III) (white bars) or containing 10 μM Fe(III) (hatched), 5 μM Mn(II) (stippled), or both (black). The data in panel A are the same as those shown for the 3-h time point in Fig. 3.

When this experiment was repeated with the perR mutant strain (Fig. 4C), there was no significant repression of any of the genes by either Mn(II) or Fe(III) addition. Furthermore, comparison of the actual expression levels indicated that all of the PerR-regulated genes are derepressed in the perR mutant background. This suggests that even after resuspension in the unsupplemented (metal-limited) minimal medium, there is still significant PerR-dependent repression of these genes. These data indicate that the effects of both Mn(II) and Fe(III) on expression of PerR regulon components are mediated by PerR.

Effects of perturbing metal ion homeostasis on metalloregulation.In contrast with perR, the fur mutation had relatively modest effects on the metalloregulation of PerR regulon genes (Fig. 4B). The overall patterns of metal-dependent repression are similar to that of the wild type for nearly all of the PerR regulon components. However, several interesting effects are worth noting. First, in several cases, Fe(III) elicits greater repression in the fur mutant than in the wild type. In the fur mutant, for example, resuspension in the iron-supplemented medium reduces expression of the zosA and perR promoters, which were not iron responsive in the wild type. Second, in most cases, the absolute levels of expression are somewhat higher in the fur mutant background, suggesting that there is a general, nonspecific derepression of these genes in this strain background. Third, the fur mutation also affected the Mn(II)-dependent repression of some genes. This is most apparent for the fur-cat-lacZ fusion, which was strongly repressed by Mn(II) in the wild-type strain (Fig. 4A) but not in either a perR (Fig. 4C) or a fur (Fig. 4B) mutant strain. These effects could all be explained by elevated intracellular iron pools in the fur mutant strain that shift PerR from the manganese-containing form to the iron-containing form, thereby leading to enhanced repression of iron-responsive genes and decreased repression of genes responsive only to Mn(II). Note that manganese and iron have been shown to compete for binding to PerR in in vitro studies (18).

To test the idea that the effects of the fur mutation on the Mn(II)-dependent repression of fur-cat-lacZ might be due to alterations to the intracellular metal ion pools, we measured the transcriptional response of the fur promoter region to various levels of Mn(II) (ranging from 100 nM to 1 mM). Consistent with previous studies of PerR regulon genes, 1 μM Mn(II) was sufficient for complete repression of fur-cat-lacZ in medium containing either 1 μM (Fig. 5A) or 10 μM Fe(III) (Fig 5B). The relatively inefficient repression elicited by 100 nM Mn(II) was enhanced in an mntR mutant strain that is derepressed for Mn(II) uptake (27). In contrast, there was little repression by Mn(II) in the fur mutant strain unless very high concentrations of Mn(II) were added. Since Mn(II) uptake is tightly regulated by MntR, it is difficult to perturb intracellular Mn(II) levels simply by manipulating concentrations in the medium. Experiments with a fur mntR double mutant might address this question, but we have not succeeded in constructing such a strain. Nevertheless, these results are consistent with the idea that PerR responds to intracellular pools of Mn(II) and Fe(II) and that these are affected by mutations that alter metal ion homeostasis systems.

• Open in new tab
• Download powerpoint

FIG. 5.

Effects of mntR and fur mutations on metalloregulation of the fur gene. Overnight cultures of strains carrying the fur-cat-lacZ reporter fusion were diluted 1:100 into minimal medium with either 1 μM Fe(III) (A) or 10 μM Fe(III) (B) and Mn(II) at 0, 0.1, 1, 10, 100, or 1,000 μM (left to right). Cells were grown to mid-log phase and collected for β-Gal assay. Note that the mntR mutant strain does not grow in concentrations of Mn(II) of 10 μM and greater (27), so no data were obtained for these conditions. WT, wild type.

Patterns of H₂O₂ induction within the PerR regulon.Many of the genes in the PerR regulon are known to be strongly induced by H₂O₂, and this transcriptional response has been shown to be modulated by the metal ion content of the growth medium: growth in Mn(II)-supplemented medium greatly reduced the extent of induction, while iron supplementation enhances induction (6, 18). Unexpectedly, we were unable to induce expression of the fur gene with H₂O₂, paraquat, or cumene hydroperoxide (data not shown). Furthermore, expression of the fur gene was not derepressed in either an ahpC or a katA mutant background (data not shown), conditions that lead to elevated expression of other peroxide-inducible genes (1, 6).

To compare the abilities of all of the PerR-regulated operons to be induced by H₂O₂ and to systematically investigate the effects of metal ions on induction, we have resuspended cells in minimal medium containing 5 μM Mn(II), 10 μM Fe(III), neither, or both, as shown in Fig. 3. After 2 h of growth, cultures were treated with 100 μM H₂O₂ (or left untreated) and gene expression was measured after 30 min (Fig. 6) or 60 min (data not shown). As expected, the level of gene expression was lowest in those cells growing in the Mn(II)-supplemented medium and these cells displayed the least response to H₂O₂ challenge. In contrast, in media supplemented with Fe(III), there was greater induction of the mrgA, katA, and zosA promoters. While qualitatively similar, the absolute level of induction in these resuspension experiments is not as great as that observed previously for the mrgA (4), katA (18), or zosA promoter (Gaballa and Helmann, submitted). Indeed, transcriptional profiling experiments performed with rich medium suggest that mrgA, katA, and zosA can each be fully derepressed by H₂O₂: the increase in mRNA levels in H₂O₂-induced cells is comparable to that in a perR mutant (J. D. Helmann et al., unpublished data).

• Open in new tab
• Download powerpoint

FIG. 6.

Induction of PerR regulon genes by H₂O₂. Strains containing the indicated reporter fusions were grown in minimal medium with no added Mn(II) or Fe(III) (None) or with 10 μM Fe(III) (Fe), 5 μM Mn(II) (Mn), or both (Fe+Mn) as described in the legend to Fig. 3. At 2 h after resuspension, the cultures were split and 100 μM H₂O₂ was added to one sample. After growth for another 30 min, cells were harvested for β-Gal assay and induced expression (gray bars) was compared to expression in the absence of H₂O₂ addition (white bars). Note that the data represented by the white bars are the same as those for the 2.5-h time point in Fig. 3. Experiments were performed twice; error bars represent the standard error of the mean.

In contrast with the mrgA and katA promoters, the ahpC and hemA promoters were only weakly induced by H₂O₂ treatment and little, if any, induction of the perR and fur promoters was observed. However, these promoters are all repressed by PerR in response to Mn(II). These results demonstrate that PerR regulon components differ both in susceptibility to repression by various metal ions and in the ability to be induced by H₂O₂. Since PerR-mediated repression can be elicited by manganese, iron, and perhaps other divalent metal ions (5), this leads to a model in which various metallated forms of PerR differ in both DNA target selectivity and reactivity with H₂O₂. Experiments testing these ideas by the in vitro reconstitution of different forms of PerR have been done (18), and additional studies are in progress.